config FB_CIRRUS
tristate "Cirrus Logic support"
- depends on FB && (AMIGA || PCI) && BROKEN
+ depends on FB && (ZORRO || PCI)
---help---
This enables support for Cirrus Logic GD542x/543x based boards on
Amiga: SD64, Piccolo, Picasso II/II+, Picasso IV, or EGS Spectrum.
config FB_CYBER2000
tristate "CyberPro 2000/2010/5000 support"
- depends on FB && PCI
+ depends on FB && PCI && (BROKEN || !SPARC64)
help
This enables support for the Integraphics CyberPro 20x0 and 5000
VGA chips used in the Rebel.com Netwinder and other machines.
This is the frame buffer device driver for the Chips & Technologies
65550 graphics chip in PowerBooks.
+config FB_ASILIANT
+ bool "Chips 69000 display support"
+ depends on FB && PCI
+
config FB_IMSTT
bool "IMS Twin Turbo display support"
depends on FB && PCI
config FB_S3TRIO
bool "S3 Trio display support"
- depends on FB && PPC
+ depends on FB && PPC && BROKEN
help
If you have a S3 Trio say Y. Say N for S3 Virge.
As this card technology is 15 years old, most people will answer N
here.
+config FB_HGA_ACCEL
+ bool "Hercules mono Acceleration functions (EXPERIMENTAL)"
+ depends on FB_HGA && EXPERIMENTAL
+ ---help---
+ This will compile the Hercules mono graphics with
+ acceleration functions.
+
+
config VIDEO_SELECT
bool
depends on FB && X86
help
SGI Visual Workstation support for framebuffer graphics.
+config FB_GBE
+ bool "SGI Graphics Backend frame buffer support"
+ depends on FB && (SGI_IP32 || X86_VISWS)
+ help
+ This is the frame buffer device driver for SGI Graphics Backend.
+ This chip is used in SGI O2 and Visual Workstation 320/540.
+
+config FB_GBE_MEM
+ int "Video memory size in MB"
+ depends on FB_GBE
+ default 8
+ help
+ This is the amount of memory reserved for the framebuffer,
+ which can be any value between 1MB and 8MB.
+
config BUS_I2C
bool
depends on FB && VISWS
config FB_RIVA
tristate "nVidia Riva support"
depends on FB && PCI
+ select I2C_ALGOBIT if FB_RIVA_I2C
+ select I2C if FB_RIVA_I2C
help
This driver supports graphics boards with the nVidia Riva/Geforce
chips.
To compile this driver as a module, choose M here: the
module will be called rivafb.
+config FB_RIVA_I2C
+ bool "Enable DDC Support"
+ depends on FB_RIVA
+ help
+ This enables I2C support for nVidia Chipsets. This is used
+ only for getting EDID information from the attached display
+ allowing for robust video mode handling and switching.
+
+ Because fbdev-2.6 requires that drivers must be able to
+ independently validate video mode parameters, you should say Y
+ here.
+
+config FB_RIVA_DEBUG
+ bool "Lots of debug output from Riva(nVidia) driver"
+ depends on FB_RIVA
+ default n
+ help
+ Say Y here if you want the Riva driver to output all sorts
+ of debugging informations to provide to the maintainer when
+ something goes wrong.
+
config FB_I810
tristate "Intel 810/815 support (EXPERIMENTAL)"
depends on FB && AGP && AGP_INTEL && EXPERIMENTAL && PCI
To compile this driver as a module, choose M here: the
module will be called tdfxfb.
+config FB_3DFX_ACCEL
+ bool "3Dfx Banshee/Voodoo3 Acceleration functions (EXPERIMENTAL)"
+ depends on FB_3DFX && EXPERIMENTAL
+ ---help---
+ This will compile the 3Dfx Banshee/Voodoo3 frame buffer device
+ with acceleration functions.
+
+
config FB_VOODOO1
tristate "3Dfx Voodoo Graphics (sst1) support"
depends on FB && PCI
To compile this driver as a module, choose M here: the
module will be called tridentfb.
+config FB_TRIDENT_ACCEL
+ bool "Trident Acceleration functions (EXPERIMENTAL)"
+ depends on FB_TRIDENT && EXPERIMENTAL
+ ---help---
+ This will compile the Trident frame buffer device with
+ acceleration functions.
+
+
config FB_PM3
tristate "Permedia3 support"
depends on FB && PCI && BROKEN
Say Y here if you want to support the built-in frame buffer of
the Motorola 68328 CPU family.
+config FB_PXA
+ tristate "PXA LCD framebuffer support"
+ depends on FB && ARCH_PXA
+ ---help---
+ Frame buffer driver for the built-in LCD controller in the Intel
+ PXA2x0 processor.
+
+ This driver is also available as a module ( = code which can be
+ inserted and removed from the running kernel whenever you want). The
+ module will be called vfb. If you want to compile it as a module,
+ say M here and read <file:Documentation/modules.txt>.
+
+ If unsure, say N.
+
+config FB_PXA_PARAMETERS
+ bool "PXA LCD command line parameters"
+ default n
+ depends on FB_PXA
+ ---help---
+ Enable the use of kernel command line or module parameters
+ to configure the physical properties of the LCD panel when
+ using the PXA LCD driver.
+
+ This option allows you to override the panel parameters
+ supplied by the platform in order to support multiple
+ different models of flatpanel. If you will only be using a
+ single model of flatpanel then you can safely leave this
+ option disabled.
+
+ Documentation/fb/pxafb.txt describes the available parameters.
+
config FB_VIRTUAL
tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)"
depends on FB