(e.g. an accelerated X server) and that are not frame buffer
device-aware may cause unexpected results. If unsure, say N.
+config FB_MODE_HELPERS
+ bool "Enable Video Mode Handling Helpers"
+ depends on FB
+ default n
+ ---help---
+ This enables functions for handling video modes using the
+ Generalized Timing Formula and the EDID parser. A few drivers rely
+ on this feature such as the radeonfb, rivafb, and the i810fb. If
+ your driver does not take advantage of this feature, choosing Y will
+ just increase the kernel size by about 5K.
+
+config FB_TILEBLITTING
+ bool "Enable Tile Blitting Support"
+ depends on FB
+ default n
+ ---help---
+ This enables tile blitting. Tile blitting is a drawing technique
+ where the screen is divided into rectangular sections (tiles), whereas
+ the standard blitting divides the screen into pixels. Because the
+ default drawing element is a tile, drawing functions will be passed
+ parameters in terms of number of tiles instead of number of pixels.
+ For example, to draw a single character, instead of using bitmaps,
+ an index to an array of bitmaps will be used. To clear or move a
+ rectangular section of a screen, the rectangle will be described in
+ terms of number of tiles in the x- and y-axis.
+
+ This is particularly important to one driver, matroxfb. If
+ unsure, say N.
+
config FB_CIRRUS
tristate "Cirrus Logic support"
depends on FB && (ZORRO || PCI)
help
Support the Permedia2 FIFO disconnect feature (see CONFIG_FB_PM2).
+config FB_ARMCLCD
+ tristate "ARM PrimeCell PL110 support"
+ depends on FB && ARM && ARM_AMBA
+ help
+ This framebuffer device driver is for the ARM PrimeCell PL110
+ Colour LCD controller. ARM PrimeCells provide the building
+ blocks for System on a Chip devices.
+
+ If you want to compile this as a module (=code which can be
+ inserted into and removed from the running kernel), say M
+ here and read <file:Documentation/modules.txt>. The module
+ will be called amba-clcd.
+
config FB_ACORN
bool "Acorn VIDC support"
depends on FB && ARM && ARCH_ACORN
(<file:drivers/video/pvr2fb.c>). Please see the file
<file:Documentation/fb/pvr2fb.txt>.
-config FB_E1355
+config FB_EPSON1355
bool "Epson 1355 framebuffer support"
- depends on FB && SUPERH
+ depends on FB && (SUPERH || ARCH_CEIVA)
help
Build in support for the SED1355 Epson Research Embedded RAMDAC
LCD/CRT Controller (since redesignated as the S1D13505) as a
framebuffer. Product specs at
<http://www.erd.epson.com/vdc/html/products.htm>.
-config E1355_REG_BASE
- hex "Register Base Address"
- depends on FB_E1355
- default "a8000000"
- help
- Epson SED1355/S1D13505 LCD/CRT controller register base address.
- See the manuals at
- <http://www.erd.epson.com/vdc/html/contents/S1D13505.htm> for
- discussion.
-
-config E1355_FB_BASE
- hex "Framebuffer Base Address"
- depends on FB_E1355
- default "a8200000"
- help
- Epson SED1355/S1D13505 LCD/CRT controller memory base address. See
- the manuals at
- <http://www.erd.epson.com/vdc/html/contents/S1D13505.htm> for
- discussion.
-
config FB_RIVA
tristate "nVidia Riva support"
depends on FB && PCI
select I2C_ALGOBIT if FB_RIVA_I2C
select I2C if FB_RIVA_I2C
+ select FB_MODE_HELPERS
help
This driver supports graphics boards with the nVidia Riva/Geforce
chips.
config FB_I810
tristate "Intel 810/815 support (EXPERIMENTAL)"
- depends on FB && AGP && AGP_INTEL && EXPERIMENTAL && PCI
+ depends on FB && EXPERIMENTAL && PCI && X86 && !X86_64
+ select AGP
+ select AGP_INTEL
+ select FB_MODE_HELPERS
help
This driver supports the on-board graphics built in to the Intel 810
and 815 chipsets. Say Y if you have and plan to use such a board.
If unsure, say N.
+config FB_INTEL
+ tristate "Intel 830M/845G/852GM/855GM/865G support (EXPERIMENTAL)"
+ depends on FB && EXPERIMENTAL && PCI && X86 && !X86_64
+ select AGP
+ select AGP_INTEL
+ help
+ This driver supports the on-board graphics built in to the Intel
+ 830M/845G/852GM/855GM/865G chipsets.
+ Say Y if you have and plan to use such a board.
+
+ To compile this driver as a module, choose M here: the
+ module will be called intelfb.
+
+config FB_INTEL_DEBUG
+ bool "Intel driver Debug Messages"
+ depends on FB_INTEL
+ ---help---
+ Say Y here if you want the Intel driver to output all sorts
+ of debugging informations to provide to the maintainer when
+ something goes wrong.
+
config FB_MATROX
tristate "Matrox acceleration"
depends on FB && PCI
packed pixel and 32 bpp packed pixel. You can also use font widths
different from 8.
-config FB_MATROX_G450
+config FB_MATROX_G
bool "G100/G200/G400/G450/G550 support"
depends on FB_MATROX
---help---
different from 8.
If you need support for G400 secondary head, you must first say Y to
- "I2C support" and "I2C bit-banging support" in the character devices
- section, and then to "Matrox I2C support" and "G400 second head
- support" here in the framebuffer section. G450/G550 secondary head
- and digital output are supported without additional modules.
+ "I2C support" in the character devices section, and then to
+ "Matrox I2C support" and "G400 second head support" here in the
+ framebuffer section. G450/G550 secondary head and digital output
+ are supported without additional modules.
The driver starts in monitor mode. You must use the matroxset tool
(available at <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to
G450/G550 hardware can display TV picture only from secondary CRTC,
and it performs no scaling, so picture must have 525 or 625 lines.
-config FB_MATROX_G100A
- bool "G100/G200/G400 support"
- depends on FB_MATROX && !FB_MATROX_G450
- ---help---
- Say Y here if you have a Matrox G100, G200 or G400 based
- video card. If you select "Advanced lowlevel driver options", you
- should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp packed
- pixel and 32 bpp packed pixel. You can also use font widths
- different from 8.
-
- If you need support for G400 secondary head, you must first say Y to
- "I2C support" and "I2C bit-banging support" in the character devices
- section, and then to "Matrox I2C support" and "G400 second head
- support" here in the framebuffer section.
-
-config FB_MATROX_G100
- bool
- depends on FB_MATROX && (FB_MATROX_G450 || FB_MATROX_G100A)
- default y
-
config FB_MATROX_I2C
tristate "Matrox I2C support"
depends on FB_MATROX && I2C
config FB_MATROX_MAVEN
tristate "G400 second head support"
- depends on FB_MATROX_G100 && FB_MATROX_I2C
+ depends on FB_MATROX_G && FB_MATROX_I2C
---help---
WARNING !!! This support does not work with G450 !!!
depends on FB && PCI
select I2C_ALGOBIT if FB_RADEON_I2C
select I2C if FB_RADEON_I2C
+ select FB_MODE_HELPERS
help
Choose this option if you want to use an ATI Radeon graphics card as
a framebuffer device. There are both PCI and AGP versions. You
framebuffer device. The ATI product support page for these boards
is at <http://support.ati.com/products/pc/mach64/>.
+config FB_ATY_GENERIC_LCD
+ bool "Mach64 generic LCD support (EXPERIMENTAL)"
+ depends on FB_ATY_CT
+ help
+ Say Y if you have a laptop with an ATI Rage LT PRO, Rage Mobility,
+ Rage XC, or Rage XL chipset.
+
+config FB_ATY_XL_INIT
+ bool "Rage XL No-BIOS Init support"
+ depends on FB_ATY_CT
+ help
+ Say Y here to support booting a Rage XL without BIOS support.
+
config FB_ATY_GX
bool "Mach64 GX support" if PCI
depends on FB_ATY
is at
<http://support.ati.com/products/pc/mach64/graphics_xpression.html>.
-config FB_ATY_XL_INIT
- bool " Rage XL No-BIOS Init support" if FB_ATY_CT
- depends on FB_ATY
+config FB_SAVAGE
+ tristate "S3 Savage support"
+ depends on FB && PCI && EXPERIMENTAL
+ select I2C_ALGOBIT if FB_SAVAGE_I2C
+ select I2C if FB_SAVAGE_I2C
+ select FB_MODE_HELPERS
help
- Say Y here to support booting a Rage XL without BIOS support.
+ This driver supports notebooks and computers with S3 Savage PCI/AGP
+ chips.
+
+ Say Y if you have such a graphics card.
+
+ To compile this driver as a module, choose M here; the module
+ will be called savagefb.
+
+config FB_SAVAGE_I2C
+ tristate "Enable DDC2 Support"
+ depends on FB_SAVAGE
+ help
+ This enables I2C support for S3 Savage Chipsets. This is used
+ only for getting EDID information from the attached display
+ allowing for robust video mode handling and switching.
+
+ Because fbdev-2.6 requires that drivers must be able to
+ independently validate video mode parameters, you should say Y
+ here.
+
+config FB_SAVAGE_ACCEL
+ tristate "Enable Console Acceleration"
+ depends on FB_SAVAGE
+ default n
+ help
+ This option will compile in console acceleration support. If
+ the resulting framebuffer console has bothersome glitches, then
+ choose N here.
config FB_SIS
tristate "SiS acceleration"
depends on FB && PCI
help
This is the frame buffer device driver for the SiS 300, 315 and
- 330 series VGA chipsets. Specs available at http://www.sis.com
+ 330 series VGA chipsets. Specs available at <http://www.sis.com>
To compile this driver as a module, choose M here; the module
will be called sisfb.
config FB_NEOMAGIC
tristate "NeoMagic display support"
depends on FB && PCI
+ select FB_MODE_HELPERS
help
This driver supports notebooks with NeoMagic PCI chips.
Say Y if you have such a graphics card.
WARNING: Do not use any application that uses the 3D engine
(namely glide) while using this driver.
- Please read the file Documentation/fb/README-sstfb.txt for supported
+ Please read the <file:Documentation/fb/README-sstfb.txt> for supported
options and other important info support.
config FB_TRIDENT
similar boards, 3DLabs Permedia3 Create!, Appian Jeronimo 2000
and maybe other boards.
+config FB_E1356
+ tristate "Epson SED1356 framebuffer support"
+ depends on FB && EXPERIMENTAL && PCI && MIPS
+
+config PB1000_CRT
+ bool "Use CRT on Pb1000 (J65)"
+ depends on MIPS_PB1000=y && FB_E1356
+
+config PB1000_NTSC
+ bool "Use Compsite NTSC on Pb1000 (J63)"
+ depends on MIPS_PB1000=y && FB_E1356
+
+config PB1000_TFT
+ bool "Use TFT Panel on Pb1000 (J64)"
+ depends on MIPS_PB1000=y && FB_E1356
+
+config PB1500_CRT
+ bool "Use CRT on Pb1500 " if MIPS_PB1500=y
+ depends on FB_E1356
+
+config PB1500_CRT
+ prompt "Use CRT on Pb1100 "
+ depends on FB_E1356 && MIPS_PB1100=y
+
+config PB1500_TFT
+ bool "Use TFT Panel on Pb1500 " if MIPS_PB1500=y
+ depends on FB_E1356
+
+config PB1500_TFT
+ prompt "Use TFT Panel on Pb1100 "
+ depends on FB_E1356 && MIPS_PB1100=y
+
+config FB_AU1100
+ bool "Au1100 LCD Driver"
+ depends on FB && EXPERIMENTAL && PCI && MIPS && MIPS_PB1100=y
+
config FB_SBUS
bool "SBUS and UPA framebuffers"
depends on FB && (SPARC32 || SPARC64)
This is the frame buffer device driver for the Hitachi HD64461 LCD
frame buffer card.
+config FB_PMAG_AA
+ bool "PMAG-AA TURBOchannel framebuffer support"
+ depends on FB && MACH_DECSTATION && TC
+ help
+ Support for the PMAG-AA TURBOchannel framebuffer card (1280x1024x1)
+ used mainly in the MIPS-based DECstation series.
+
config FB_PMAG_BA
bool "PMAG-BA TURBOchannel framebuffer support"
- depends on FB && DECSTATION && TC
+ depends on FB && MACH_DECSTATION && TC
help
- Say Y here to directly support the on-board PMAG-BA framebuffer in
- the 5000/1xx versions of the DECstation. There is a page dedicated
- to Linux on DECstations at <http://decstation.unix-ag.org/>.
+ Support for the PMAG-BA TURBOchannel framebuffer card (1024x864x8)
+ used mainly in the MIPS-based DECstation series.
config FB_PMAGB_B
- bool "PMAGB-B TURBOchannel framebuffer spport"
- depends on FB && DECSTATION && TC
+ bool "PMAGB-B TURBOchannel framebuffer support"
+ depends on FB && MACH_DECSTATION && TC
help
- Say Y here to directly support the on-board PMAGB-B framebuffer in
- the 5000/1xx versions of the DECstation. There is a page dedicated
- to Linux on DECstations at <http://decstation.unix-ag.org/>.
+ Support for the PMAGB-B TURBOchannel framebuffer card used mainly
+ in the MIPS-based DECstation series. The card is currently only
+ supported in 1280x1024x8 mode.
config FB_MAXINE
- bool "Maxine (Personal DECstation) onboard framebuffer spport"
- depends on FB && DECSTATION && TC
+ bool "Maxine (Personal DECstation) onboard framebuffer support"
+ depends on FB && MACH_DECSTATION && TC
help
- Say Y here to directly support the on-board framebuffer in the
- Maxine (5000/20, /25, /33) version of the DECstation. There is a
- page dedicated to Linux on DECstations at <http://decstation.unix-ag.org/>.
+ Support for the onboard framebuffer (1024x768x8) in the Personal
+ DECstation series (Personal DECstation 5000/20, /25, /33, /50,
+ Codename "Maxine").
config FB_TX3912
bool "TMPTX3912/PR31700 frame buffer support"
Say Y here to enable kernel support for the on-board framebuffer.
+config FB_G364
+ bool
+ depends on MIPS_MAGNUM_4000 || OLIVETTI_M700
+ help
+ The G364 driver is the framebuffer used in MIPS Magnum 4000 and
+ Olivetti M700-10 systems.
+
config FB_68328
bool "Motorola 68328 native frame buffer support"
depends on (M68328 || M68EZ328 || M68VZ328)
If unsure, say N.
+config FB_W100
+ tristate "W100 frame buffer support"
+ depends on FB && PXA_SHARPSL
+ ---help---
+ Frame buffer driver for the w100 as found on the Sharp SL-Cxx series.
+
+ This driver is also available as a module ( = code which can be
+ inserted and removed from the running kernel whenever you want). The
+ module will be called vfb. If you want to compile it as a module,
+ say M here and read <file:Documentation/modules.txt>.
+
+ If unsure, say N.
+
config FB_PXA_PARAMETERS
bool "PXA LCD command line parameters"
default n
single model of flatpanel then you can safely leave this
option disabled.
- Documentation/fb/pxafb.txt describes the available parameters.
+ <file:Documentation/fb/pxafb.txt> describes the available parameters.
config FB_VIRTUAL
tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)"
source "drivers/video/logo/Kconfig"
endif
+if FB && SYSFS
+ source "drivers/video/backlight/Kconfig"
+endif
+
endmenu
git://git.onelab.eu / linux-2.6.git / blobdiff