blitting. This is used by drivers that don't provide their own
(accelerated) version.
-config FB_SOFT_CURSOR
- tristate
- depends on FB
- default n
- ---help---
- Include the soft_cursor function for generic software cursor support.
- This is used by drivers that don't provide their own (accelerated)
- version.
-
config FB_MACMODES
tristate
depends on FB
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
---help---
This enables support for Cirrus Logic GD542x/543x based boards on
Amiga: SD64, Piccolo, Picasso II/II+, Picasso IV, or EGS Spectrum.
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This is the frame buffer device driver for the Permedia2 AGP frame
buffer card from ASK, aka `Graphic Blaster Exxtreme'. There is a
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This framebuffer device driver is for the ARM PrimeCell PL110
Colour LCD controller. ARM PrimeCells provide the building
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This is the frame buffer device driver for the Acorn VIDC graphics
hardware found in Acorn RISC PCs and other ARM-based machines. If
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
+ help
+ Say Y to enable the Framebuffer driver for the CLPS7111 and
+ EP7212 processors.
config FB_SA1100
bool "SA-1100 LCD support"
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This is a framebuffer device for the SA-1100 LCD Controller.
See <http://www.linux-fbdev.org/> for information on framebuffer
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
config FB_CYBER2000
tristate "CyberPro 2000/2010/5000 support"
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This enables support for the Integraphics CyberPro 20x0 and 5000
VGA chips used in the Rebel.com Netwinder and other machines.
default y
select FB_CFB_FILLRECT
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
config FB_Q40
bool
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
config FB_AMIGA
tristate "Amiga native chipset support"
depends on FB && AMIGA
- select FB_SOFT_CURSOR
help
This is the frame buffer device driver for the builtin graphics
chipset found in Amigas.
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This enables support for the Cybervision 64 graphics card from
Phase5. Please note that its use is not all that intuitive (i.e. if
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This enables support for the Cybervision 64/3D graphics card from
Phase5. Please note that its use is not all that intuitive (i.e. if
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This is the frame buffer device driver for the Amiga FrameMaster
card from BSC (exhibited 1992 but not shipped as a CBM product).
+config FB_ARC
+ tristate "Arc Monochrome LCD board support"
+ depends on FB && X86
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This enables support for the Arc Monochrome LCD board. The board
+ is based on the KS-108 lcd controller and is typically a matrix
+ of 2*n chips. This driver was tested with a 128x64 panel. This
+ driver supports it for use with x86 SBCs through a 16 bit GPIO
+ interface (8 bit data, 8 bit control). If you anticpate using
+ this driver, say Y or M; otherwise say N. You must specify the
+ GPIO IO address to be used for setting control and data.
+
config FB_ATARI
bool "Atari native chipset support"
depends on (FB = y) && ATARI && BROKEN
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
select FB_MACMODES
help
Say Y if you want support with Open Firmware for your graphics
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
select FB_MACMODES
help
This driver supports a frame buffer for the graphics adapter in the
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
select FB_MACMODES
help
This driver supports a frame buffer for the "platinum" graphics
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
select FB_MACMODES
help
This driver supports a frame buffer for the "valkyrie" graphics
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This is the frame buffer device driver for the Chips & Technologies
65550 graphics chip in PowerBooks.
config FB_ASILIANT
- bool "Chips 69000 display support"
+ bool "Asiliant (Chips) 69000 display support"
depends on (FB = y) && PCI
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
config FB_IMSTT
bool "IMS Twin Turbo display support"
depends on (FB = y) && PCI
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
select FB_MACMODES if PPC
help
The IMS Twin Turbo is a PCI-based frame buffer card bundled with
many Macintosh and compatible computers.
-config FB_S3TRIO
- bool "S3 Trio display support"
- depends on (FB = y) && PPC && BROKEN
- help
- If you have a S3 Trio say Y. Say N for S3 Virge.
-
config FB_VGA16
tristate "VGA 16-color graphics support"
depends on FB && (X86 || PPC)
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This is the frame buffer device driver for VGA 16 color graphic
cards. Say Y if you have such a card.
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
default y
---help---
STI refers to the HP "Standard Text Interface" which is a set of
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
select FB_MACMODES
# bool ' Apple DAFB display support' CONFIG_FB_DAFB
depends on (FB = y) && HP300
select FB_CFB_FILLRECT
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
default y
config FB_TGA
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This is the frame buffer device driver for generic TGA graphic
cards. Say Y if you have one of those.
config FB_VESA
bool "VESA VGA graphics support"
- depends on (FB = y) && (X86 || X86_64)
+ depends on (FB = y) && X86
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This is the frame buffer device driver for generic VESA 2.0
compliant graphic cards. The older VESA 1.2 cards are not supported.
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
Say Y here if you have a Hercules mono graphics card.
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
SGI Visual Workstation support for framebuffer graphics.
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This is the frame buffer device driver for SGI Graphics Backend.
This chip is used in SGI O2 and Visual Workstation 320/540.
config FB_GBE_MEM
int "Video memory size in MB"
depends on FB_GBE
- default 8
+ default 4
help
This is the amount of memory reserved for the framebuffer,
which can be any value between 1MB and 8MB.
-config BUS_I2C
- bool
- depends on (FB = y) && VISWS
- default y
-
config FB_SUN3
bool "Sun3 framebuffer support"
depends on (FB = y) && (SUN3 || SUN3X) && BROKEN
+config FB_SBUS
+ bool "SBUS and UPA framebuffers"
+ depends on (FB = y) && SPARC
+ help
+ Say Y if you want support for SBUS or UPA based frame buffer device.
+
config FB_BW2
bool "BWtwo support"
- depends on (FB = y) && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
+ depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This is the frame buffer device driver for the BWtwo frame buffer.
config FB_CG3
bool "CGthree support"
- depends on (FB = y) && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
+ depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
+ select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This is the frame buffer device driver for the CGthree frame buffer.
config FB_CG6
bool "CGsix (GX,TurboGX) support"
- depends on (FB = y) && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
+ depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This is the frame buffer device driver for the CGsix (GX, TurboGX)
frame buffer.
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
---help---
Say Y here if you have a PowerVR 2 card in your box. If you plan to
run linux on your Dreamcast, you will have to say Y here.
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
Build in support for the SED1355 Epson Research Embedded RAMDAC
LCD/CRT Controller (since redesignated as the S1D13505) as a
framebuffer. Product specs at
<http://www.erd.epson.com/vdc/html/products.htm>.
+config FB_S1D13XXX
+ tristate "Epson S1D13XXX framebuffer support"
+ depends on FB
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ Support for S1D13XXX framebuffer device family (currently only
+ working with S1D13806). Product specs at
+ <http://www.erd.epson.com/vdc/html/legacy_13xxx.htm>
+
config FB_NVIDIA
tristate "nVidia Framebuffer Support"
depends on FB && PCI
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This driver supports graphics boards with the nVidia chips, TNT
and newer. For very old chipsets, such as the RIVA128, then use
config FB_NVIDIA_I2C
bool "Enable DDC Support"
- depends on FB_NVIDIA && !PPC_OF
+ depends on FB_NVIDIA
help
This enables I2C support for nVidia Chipsets. This is used
only for getting EDID information from the attached display
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This driver supports graphics boards with the nVidia Riva/Geforce
chips.
config FB_I810
tristate "Intel 810/815 support (EXPERIMENTAL)"
- depends on FB && EXPERIMENTAL && PCI && X86 && !X86_64
+ depends on FB && EXPERIMENTAL && PCI && X86_32
select AGP
select AGP_INTEL
select FB_MODE_HELPERS
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This driver supports the on-board graphics built in to the Intel 810
and 815 chipsets. Say Y if you have and plan to use such a board.
If unsure, say N.
+config FB_I810_I2C
+ bool "Enable DDC Support"
+ depends on FB_I810 && FB_I810_GTF
+ select I2C
+ select I2C_ALGOBIT
+ help
+
config FB_INTEL
tristate "Intel 830M/845G/852GM/855GM/865G support (EXPERIMENTAL)"
- depends on FB && EXPERIMENTAL && PCI && X86 && !X86_64
+ depends on FB && EXPERIMENTAL && PCI && X86_32
select AGP
select AGP_INTEL
select FB_MODE_HELPERS
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This driver supports the on-board graphics built in to the Intel
830M/845G/852GM/855GM/865G chipsets.
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
select FB_TILEBLITTING
select FB_MACMODES if PPC_PMAC
---help---
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
select FB_MACMODES if PPC
help
Choose this option if you want to use an ATI Radeon graphics card as
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
select FB_MACMODES if PPC_OF
help
Choose this option if you want to use an ATI Radeon graphics card as
can be build either as modules or built-in.
There is a product page at
- <http://www.ati.com/na/pages/products/pc/radeon32/index.html>.
-
+ http://apps.ati.com/ATIcompare/
config FB_RADEON_I2C
bool "DDC/I2C for ATI Radeon support"
depends on FB_RADEON
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
select FB_MACMODES if PPC_PMAC
help
This driver supports graphics boards with the ATI Rage128 chips.
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
select FB_MACMODES if PPC
help
This driver supports graphics boards with the ATI Mach64 chips.
Say Y if you have a laptop with an ATI Rage LT PRO, Rage Mobility,
Rage XC, or Rage XL chipset.
-config FB_ATY_XL_INIT
- bool "Rage XL No-BIOS Init support"
- depends on FB_ATY_CT
- help
- Say Y here to support booting a Rage XL without BIOS support.
-
config FB_ATY_GX
bool "Mach64 GX support" if PCI
depends on FB_ATY
is at
<http://support.ati.com/products/pc/mach64/graphics_xpression.html>.
+config FB_S3TRIO
+ bool "S3 Trio display support"
+ depends on (FB = y) && PPC && BROKEN
+ help
+ If you have a S3 Trio say Y. Say N for S3 Virge.
+
config FB_SAVAGE
tristate "S3 Savage support"
depends on FB && PCI && EXPERIMENTAL
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This driver supports notebooks and computers with S3 Savage PCI/AGP
chips.
choose N here.
config FB_SIS
- tristate "SiS acceleration"
+ tristate "SiS/XGI display support"
depends on FB && PCI
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
- This is the frame buffer device driver for the SiS 300, 315 and
- 330 series VGA chipsets. Specs available at <http://www.sis.com>
+ This is the frame buffer device driver for the SiS 300, 315, 330
+ and 340 series as well as XGI V3XT, V5, V8, Z7 graphics chipsets.
+ Specs available at <http://www.sis.com> and <http://www.xgitech.com>.
To compile this driver as a module, choose M here; the module
will be called sisfb.
Say Y here to support use of the SiS 300/305, 540, 630 and 730.
config FB_SIS_315
- bool "SiS 315/330 series support"
+ bool "SiS 315/330/340 series and XGI support"
depends on FB_SIS
help
- Say Y here to support use of the SiS 315 and 330 series
- (315/H/PRO, 55x, 650, 651, 740, 330, 661, 741, 760).
+ Say Y here to support use of the SiS 315, 330 and 340 series
+ (315/H/PRO, 55x, 650, 651, 740, 330, 661, 741, 760, 761) as well
+ as XGI V3XT, V5, V8 and Z7.
config FB_NEOMAGIC
tristate "NeoMagic display support"
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This driver supports notebooks with NeoMagic PCI chips.
Say Y if you have such a graphics card.
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
Say Y here if you have a STG4000 / Kyro / PowerVR 3 based
graphics board.
select FB_CFB_IMAGEBLIT
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
- select FB_SOFT_CURSOR
help
This driver supports graphics boards with the 3Dfx Banshee/Voodoo3
chips. Say Y if you have such a graphics board.
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
---help---
Say Y here if you have a 3Dfx Voodoo Graphics (Voodoo1/sst1) or
Voodoo2 (cvg) based graphics card.
Please read the <file:Documentation/fb/README-sstfb.txt> for supported
options and other important info support.
+config FB_CYBLA
+ tristate "Cyberblade/i1 support"
+ depends on FB && PCI && X86_32 && !64BIT
+ select FB_CFB_IMAGEBLIT
+ select VIDEO_SELECT
+ ---help---
+ This driver is supposed to support the Trident Cyberblade/i1
+ graphics core integrated in the VIA VT8601A North Bridge,
+ also known as VIA Apollo PLE133.
+
+ Status:
+ - Developed, tested and working on EPIA 5000 and EPIA 800.
+ - Does work reliable on all systems with CRT/LCD connected to
+ normal VGA ports.
+ - Should work on systems that do use the internal LCD port, but
+ this is absolutely not tested.
+
+ Character imageblit, copyarea and rectangle fill are hw accelerated,
+ ypan scrolling is used by default.
+
+ Please do read <file:Documentation/fb/cyblafb/*>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called cyblafb.
+
config FB_TRIDENT
tristate "Trident support"
depends on FB && PCI
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
---help---
This driver is supposed to support graphics boards with the
Trident CyberXXXX/Image/CyberBlade chips mostly found in laptops
but also on some motherboards. For more information, read
<file:Documentation/fb/tridentfb.txt>
+ Cyberblade/i1 support will be removed soon, use the cyblafb driver
+ instead.
+
Say Y if you have such a graphics board.
+
To compile this driver as a module, choose M here: the
module will be called tridentfb.
This will compile the Trident frame buffer device with
acceleration functions.
-
config FB_PM3
tristate "Permedia3 support"
depends on FB && PCI && BROKEN
similar boards, 3DLabs Permedia3 Create!, Appian Jeronimo 2000
and maybe other boards.
-config FB_E1356
- tristate "Epson SED1356 framebuffer support"
- depends on FB && EXPERIMENTAL && PCI && MIPS
-
-config PB1000_CRT
- bool "Use CRT on Pb1000 (J65)"
- depends on MIPS_PB1000=y && FB_E1356
-
-config PB1000_NTSC
- bool "Use Compsite NTSC on Pb1000 (J63)"
- depends on MIPS_PB1000=y && FB_E1356
-
-config PB1000_TFT
- bool "Use TFT Panel on Pb1000 (J64)"
- depends on MIPS_PB1000=y && FB_E1356
-
-config PB1500_CRT
- bool "Use CRT on Pb1500 " if MIPS_PB1500=y
- depends on FB_E1356
-
-config PB1500_CRT
- prompt "Use CRT on Pb1100 "
- depends on FB_E1356 && MIPS_PB1100=y
-
-config PB1500_TFT
- bool "Use TFT Panel on Pb1500 " if MIPS_PB1500=y
- depends on FB_E1356
-
-config PB1500_TFT
- prompt "Use TFT Panel on Pb1100 "
- depends on FB_E1356 && MIPS_PB1100=y
-
config FB_AU1100
bool "Au1100 LCD Driver"
depends on (FB = y) && EXPERIMENTAL && PCI && MIPS && MIPS_PB1100=y
source "drivers/video/geode/Kconfig"
-config FB_SBUS
- bool "SBUS and UPA framebuffers"
- depends on (FB = y) && (SPARC32 || SPARC64)
- help
- Say Y if you want support for SBUS or UPA based frame buffer device.
-
config FB_FFB
bool "Creator/Creator3D/Elite3D support"
depends on FB_SBUS && SPARC64
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This is the frame buffer device driver for the Creator, Creator3D,
and Elite3D graphics boards.
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This is the frame buffer device driver for the TCX 24/8bit frame
buffer.
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This is the frame buffer device driver for the CGfourteen frame
buffer on Desktop SPARCsystems with the SX graphics option.
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This is the frame buffer device driver for the P9100 card
supported on Sparcbook 3 machines.
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This is the frame buffer device driver for the SBUS-based Sun ZX
(leo) frame buffer cards.
config FB_PCI
bool "PCI framebuffers"
- depends on (FB = y) && PCI && (SPARC64 || SPARC32)
+ depends on (FB = y) && PCI && SPARC
config FB_IGA
bool "IGA 168x display support"
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This is the framebuffer device for the INTERGRAPHICS 1680 and
successor frame buffer cards.
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This is the frame buffer device driver for the Hitachi HD64461 LCD
frame buffer card.
config FB_PMAG_AA
bool "PMAG-AA TURBOchannel framebuffer support"
- depends on (FB = y) && MACH_DECSTATION && TC
+ depends on (FB = y) && TC
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
Support for the PMAG-AA TURBOchannel framebuffer card (1280x1024x1)
used mainly in the MIPS-based DECstation series.
config FB_PMAG_BA
bool "PMAG-BA TURBOchannel framebuffer support"
- depends on (FB = y) && MACH_DECSTATION && TC
+ depends on (FB = y) && TC
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
Support for the PMAG-BA TURBOchannel framebuffer card (1024x864x8)
used mainly in the MIPS-based DECstation series.
config FB_PMAGB_B
bool "PMAGB-B TURBOchannel framebuffer support"
- depends on (FB = y) && MACH_DECSTATION && TC
+ depends on (FB = y) && TC
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
Support for the PMAGB-B TURBOchannel framebuffer card used mainly
in the MIPS-based DECstation series. The card is currently only
config FB_MAXINE
bool "Maxine (Personal DECstation) onboard framebuffer support"
- depends on (FB = y) && MACH_DECSTATION && TC
+ depends on (FB = y) && MACH_DECSTATION
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
Support for the onboard framebuffer (1024x768x8) in the Personal
DECstation series (Personal DECstation 5000/20, /25, /33, /50,
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
The TX3912 is a Toshiba RISC processor based on the MIPS 3900 core
see <http://www.toshiba.com/taec/components/Generic/risc/tx3912.htm>.
Say Y here to enable kernel support for the on-board framebuffer.
config FB_G364
- bool
- depends on MIPS_MAGNUM_4000 || OLIVETTI_M700
+ bool "G364 frame buffer support"
+ depends on (FB = y) && (MIPS_MAGNUM_4000 || OLIVETTI_M700)
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
The G364 driver is the framebuffer used in MIPS Magnum 4000 and
Olivetti M700-10 systems.
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
Say Y here if you want to support the built-in frame buffer of
the Motorola 68328 CPU family.
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
---help---
Frame buffer driver for the built-in LCD controller in the Intel
PXA2x0 processor.
This driver is also available as a module ( = code which can be
inserted and removed from the running kernel whenever you want). The
- module will be called vfb. If you want to compile it as a module,
- say M here and read <file:Documentation/modules.txt>.
-
- If unsure, say N.
-
-config FB_W100
- tristate "W100 frame buffer support"
- depends on FB && PXA_SHARPSL
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
- ---help---
- Frame buffer driver for the w100 as found on the Sharp SL-Cxx series.
-
- This driver is also available as a module ( = code which can be
- inserted and removed from the running kernel whenever you want). The
- module will be called vfb. If you want to compile it as a module,
+ module will be called pxafb. If you want to compile it as a module,
say M here and read <file:Documentation/modules.txt>.
If unsure, say N.
<file:Documentation/fb/pxafb.txt> describes the available parameters.
-config FB_S1D13XXX
- tristate "Epson S1D13XXX framebuffer support"
- depends on FB
+config FB_W100
+ tristate "W100 frame buffer support"
+ depends on FB && PXA_SHARPSL
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ ---help---
+ Frame buffer driver for the w100 as found on the Sharp SL-Cxx series.
+
+ This driver is also available as a module ( = code which can be
+ inserted and removed from the running kernel whenever you want). The
+ module will be called w100fb. If you want to compile it as a module,
+ say M here and read <file:Documentation/modules.txt>.
+
+ If unsure, say N.
+
+config FB_S3C2410
+ tristate "S3C2410 LCD framebuffer support"
+ depends on FB && ARCH_S3C2410
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
+ ---help---
+ Frame buffer driver for the built-in LCD controller in the Samsung
+ S3C2410 processor.
+
+ This driver is also available as a module ( = code which can be
+ inserted and removed from the running kernel whenever you want). The
+ module will be called s3c2410fb. If you want to compile it as a module,
+ say M here and read <file:Documentation/modules.txt>.
+
+ If unsure, say N.
+config FB_S3C2410_DEBUG
+ bool "S3C2410 lcd debug messages"
+ depends on FB_S3C2410
help
- Support for S1D13XXX framebuffer device family (currently only
- working with S1D13806). Product specs at
- <http://www.erd.epson.com/vdc/html/legacy_13xxx.htm>
+ Turn on debugging messages. Note that you can set/unset at run time
+ through sysfs
config FB_VIRTUAL
tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)"
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
---help---
This is a `virtual' frame buffer device. It operates on a chunk of
unswappable kernel memory instead of on the memory of a graphics