******************************************************************************/
-#include <linux/config.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/spinlock.h>
#include <linux/wait.h>
+#include <linux/backlight.h>
#include <asm/io.h>
#include <asm/uaccess.h>
#include "ati_ids.h"
#ifdef __powerpc__
+#include <asm/machdep.h>
#include <asm/prom.h>
#include "../macmodes.h"
#endif
#define GUI_RESERVE (1 * PAGE_SIZE)
/* FIXME: remove the FAIL definition */
-#define FAIL(msg) do { printk(KERN_CRIT "atyfb: " msg "\n"); return -EINVAL; } while (0)
-#define FAIL_MAX(msg, x, _max_) do { if(x > _max_) { printk(KERN_CRIT "atyfb: " msg " %x(%x)\n", x, _max_); return -EINVAL; } } while (0)
-
+#define FAIL(msg) do { \
+ if (!(var->activate & FB_ACTIVATE_TEST)) \
+ printk(KERN_CRIT "atyfb: " msg "\n"); \
+ return -EINVAL; \
+} while (0)
+#define FAIL_MAX(msg, x, _max_) do { \
+ if (x > _max_) { \
+ if (!(var->activate & FB_ACTIVATE_TEST)) \
+ printk(KERN_CRIT "atyfb: " msg " %x(%x)\n", x, _max_); \
+ return -EINVAL; \
+ } \
+} while (0)
#ifdef DEBUG
#define DPRINTK(fmt, args...) printk(KERN_DEBUG "atyfb: " fmt, ## args)
#else
* The Hardware parameters for each card
*/
-struct aty_cmap_regs {
- u8 windex;
- u8 lut;
- u8 mask;
- u8 rindex;
- u8 cntl;
-};
-
struct pci_mmap_map {
unsigned long voff;
unsigned long poff;
u_int transp, struct fb_info *info);
static int atyfb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info);
static int atyfb_blank(int blank, struct fb_info *info);
-static int atyfb_ioctl(struct inode *inode, struct file *file, u_int cmd,
- u_long arg, struct fb_info *info);
-extern void atyfb_fillrect(struct fb_info *info, const struct fb_fillrect *rect);
-extern void atyfb_copyarea(struct fb_info *info, const struct fb_copyarea *area);
-extern void atyfb_imageblit(struct fb_info *info, const struct fb_image *image);
+static int atyfb_ioctl(struct fb_info *info, u_int cmd, u_long arg);
#ifdef __sparc__
-static int atyfb_mmap(struct fb_info *info, struct file *file, struct vm_area_struct *vma);
+static int atyfb_mmap(struct fb_info *info, struct vm_area_struct *vma);
#endif
static int atyfb_sync(struct fb_info *info);
* Internal routines
*/
-static int aty_init(struct fb_info *info, const char *name);
+static int aty_init(struct fb_info *info);
+static void aty_resume_chip(struct fb_info *info);
#ifdef CONFIG_ATARI
static int store_video_par(char *videopar, unsigned char m64_num);
#endif
.fb_fillrect = atyfb_fillrect,
.fb_copyarea = atyfb_copyarea,
.fb_imageblit = atyfb_imageblit,
- .fb_cursor = soft_cursor,
#ifdef __sparc__
.fb_mmap = atyfb_mmap,
#endif
static int pll;
static int mclk;
static int xclk;
-static int comp_sync __initdata = -1;
+static int comp_sync __devinitdata = -1;
static char *mode;
#ifdef CONFIG_PPC
-static int default_vmode __initdata = VMODE_CHOOSE;
-static int default_cmode __initdata = CMODE_CHOOSE;
+static int default_vmode __devinitdata = VMODE_CHOOSE;
+static int default_cmode __devinitdata = CMODE_CHOOSE;
module_param_named(vmode, default_vmode, int, 0);
MODULE_PARM_DESC(vmode, "int: video mode for mac");
#endif
#ifdef CONFIG_ATARI
-static unsigned int mach64_count __initdata = 0;
-static unsigned long phys_vmembase[FB_MAX] __initdata = { 0, };
-static unsigned long phys_size[FB_MAX] __initdata = { 0, };
-static unsigned long phys_guiregbase[FB_MAX] __initdata = { 0, };
+static unsigned int mach64_count __devinitdata = 0;
+static unsigned long phys_vmembase[FB_MAX] __devinitdata = { 0, };
+static unsigned long phys_size[FB_MAX] __devinitdata = { 0, };
+static unsigned long phys_guiregbase[FB_MAX] __devinitdata = { 0, };
#endif
/* top -> down is an evolution of mach64 chipset, any corrections? */
#define ATI_CHIP_264VT3 (M64F_VT | M64F_INTEGRATED | M64F_VT_BUS | M64F_GTB_DSP | M64F_SDRAM_MAGIC_PLL)
#define ATI_CHIP_264VT4 (M64F_VT | M64F_INTEGRATED | M64F_GTB_DSP)
+/* FIXME what is this chip? */
#define ATI_CHIP_264LT (M64F_GT | M64F_INTEGRATED | M64F_GTB_DSP)
/* make sets shorter */
static struct {
u16 pci_id;
const char *name;
- int pll, mclk, xclk;
+ int pll, mclk, xclk, ecp_max;
u32 features;
} aty_chips[] __devinitdata = {
#ifdef CONFIG_FB_ATY_GX
/* Mach64 GX */
- { PCI_CHIP_MACH64GX, "ATI888GX00 (Mach64 GX)", 135, 50, 50, ATI_CHIP_88800GX },
- { PCI_CHIP_MACH64CX, "ATI888CX00 (Mach64 CX)", 135, 50, 50, ATI_CHIP_88800CX },
+ { PCI_CHIP_MACH64GX, "ATI888GX00 (Mach64 GX)", 135, 50, 50, 0, ATI_CHIP_88800GX },
+ { PCI_CHIP_MACH64CX, "ATI888CX00 (Mach64 CX)", 135, 50, 50, 0, ATI_CHIP_88800CX },
#endif /* CONFIG_FB_ATY_GX */
#ifdef CONFIG_FB_ATY_CT
- { PCI_CHIP_MACH64CT, "ATI264CT (Mach64 CT)", 135, 60, 60, ATI_CHIP_264CT },
- { PCI_CHIP_MACH64ET, "ATI264ET (Mach64 ET)", 135, 60, 60, ATI_CHIP_264ET },
- { PCI_CHIP_MACH64VT, "ATI264VT? (Mach64 VT)", 170, 67, 67, ATI_CHIP_264VT },
- { PCI_CHIP_MACH64GT, "3D RAGE (Mach64 GT)", 135, 63, 63, ATI_CHIP_264GT },
- /* FIXME { ...ATI_264GU, maybe ATI_CHIP_264GTDVD }, */
- { PCI_CHIP_MACH64GU, "3D RAGE II+ (Mach64 GTB)", 200, 67, 67, ATI_CHIP_264GTB },
- { PCI_CHIP_MACH64VU, "ATI264VTB (Mach64 VU)", 200, 67, 67, ATI_CHIP_264VT3 },
-
- { PCI_CHIP_MACH64LT, "3D RAGE LT (Mach64 LT)", 135, 63, 63, ATI_CHIP_264LT },
- /* FIXME chipset maybe ATI_CHIP_264LTPRO ? */
- { PCI_CHIP_MACH64LG, "3D RAGE LT-G (Mach64 LG)", 230, 63, 63, ATI_CHIP_264LTG | M64F_LT_LCD_REGS | M64F_G3_PB_1024x768 },
-
- { PCI_CHIP_MACH64VV, "ATI264VT4 (Mach64 VV)", 230, 83, 83, ATI_CHIP_264VT4 },
-
- { PCI_CHIP_MACH64GV, "3D RAGE IIC (Mach64 GV, PCI)", 230, 83, 83, ATI_CHIP_264GT2C },
- { PCI_CHIP_MACH64GW, "3D RAGE IIC (Mach64 GW, AGP)", 230, 83, 83, ATI_CHIP_264GT2C },
- { PCI_CHIP_MACH64GY, "3D RAGE IIC (Mach64 GY, PCI)", 230, 83, 83, ATI_CHIP_264GT2C },
- { PCI_CHIP_MACH64GZ, "3D RAGE IIC (Mach64 GZ, AGP)", 230, 83, 83, ATI_CHIP_264GT2C },
-
- { PCI_CHIP_MACH64GB, "3D RAGE PRO (Mach64 GB, BGA, AGP)", 230, 100, 100, ATI_CHIP_264GTPRO },
- { PCI_CHIP_MACH64GD, "3D RAGE PRO (Mach64 GD, BGA, AGP 1x)", 230, 100, 100, ATI_CHIP_264GTPRO },
- { PCI_CHIP_MACH64GI, "3D RAGE PRO (Mach64 GI, BGA, PCI)", 230, 100, 100, ATI_CHIP_264GTPRO | M64F_MAGIC_VRAM_SIZE },
- { PCI_CHIP_MACH64GP, "3D RAGE PRO (Mach64 GP, PQFP, PCI)", 230, 100, 100, ATI_CHIP_264GTPRO },
- { PCI_CHIP_MACH64GQ, "3D RAGE PRO (Mach64 GQ, PQFP, PCI, limited 3D)", 230, 100, 100, ATI_CHIP_264GTPRO },
-
- { PCI_CHIP_MACH64LB, "3D RAGE LT PRO (Mach64 LB, AGP)", 236, 75, 100, ATI_CHIP_264LTPRO },
- { PCI_CHIP_MACH64LD, "3D RAGE LT PRO (Mach64 LD, AGP)", 230, 100, 100, ATI_CHIP_264LTPRO },
- { PCI_CHIP_MACH64LI, "3D RAGE LT PRO (Mach64 LI, PCI)", 230, 100, 100, ATI_CHIP_264LTPRO | M64F_G3_PB_1_1 | M64F_G3_PB_1024x768 },
- { PCI_CHIP_MACH64LP, "3D RAGE LT PRO (Mach64 LP, PCI)", 230, 100, 100, ATI_CHIP_264LTPRO },
- { PCI_CHIP_MACH64LQ, "3D RAGE LT PRO (Mach64 LQ, PCI)", 230, 100, 100, ATI_CHIP_264LTPRO },
-
- { PCI_CHIP_MACH64GM, "3D RAGE XL (Mach64 GM, AGP)", 230, 83, 63, ATI_CHIP_264XL },
- { PCI_CHIP_MACH64GN, "3D RAGE XL (Mach64 GN, AGP)", 230, 83, 63, ATI_CHIP_264XL },
- { PCI_CHIP_MACH64GO, "3D RAGE XL (Mach64 GO, PCI-66/BGA)", 230, 83, 63, ATI_CHIP_264XL },
- { PCI_CHIP_MACH64GR, "3D RAGE XL (Mach64 GR, PCI-33MHz)", 230, 83, 63, ATI_CHIP_264XL },
- { PCI_CHIP_MACH64GL, "3D RAGE XL (Mach64 GL, PCI)", 230, 83, 63, ATI_CHIP_264XL },
- { PCI_CHIP_MACH64GS, "3D RAGE XL (Mach64 GS, PCI)", 230, 83, 63, ATI_CHIP_264XL },
-
- { PCI_CHIP_MACH64LM, "3D RAGE Mobility P/M (Mach64 LM, AGP 2x)", 230, 83, 125, ATI_CHIP_MOBILITY },
- { PCI_CHIP_MACH64LN, "3D RAGE Mobility L (Mach64 LN, AGP 2x)", 230, 83, 125, ATI_CHIP_MOBILITY },
- { PCI_CHIP_MACH64LR, "3D RAGE Mobility P/M (Mach64 LR, PCI)", 230, 83, 125, ATI_CHIP_MOBILITY },
- { PCI_CHIP_MACH64LS, "3D RAGE Mobility L (Mach64 LS, PCI)", 230, 83, 125, ATI_CHIP_MOBILITY },
+ { PCI_CHIP_MACH64CT, "ATI264CT (Mach64 CT)", 135, 60, 60, 0, ATI_CHIP_264CT },
+ { PCI_CHIP_MACH64ET, "ATI264ET (Mach64 ET)", 135, 60, 60, 0, ATI_CHIP_264ET },
+
+ /* FIXME what is this chip? */
+ { PCI_CHIP_MACH64LT, "ATI264LT (Mach64 LT)", 135, 63, 63, 0, ATI_CHIP_264LT },
+
+ { PCI_CHIP_MACH64VT, "ATI264VT (Mach64 VT)", 170, 67, 67, 80, ATI_CHIP_264VT },
+ { PCI_CHIP_MACH64GT, "3D RAGE (Mach64 GT)", 135, 63, 63, 80, ATI_CHIP_264GT },
+
+ { PCI_CHIP_MACH64VU, "ATI264VT3 (Mach64 VU)", 200, 67, 67, 80, ATI_CHIP_264VT3 },
+ { PCI_CHIP_MACH64GU, "3D RAGE II+ (Mach64 GU)", 200, 67, 67, 100, ATI_CHIP_264GTB },
+
+ { PCI_CHIP_MACH64LG, "3D RAGE LT (Mach64 LG)", 230, 63, 63, 100, ATI_CHIP_264LTG | M64F_LT_LCD_REGS | M64F_G3_PB_1024x768 },
+
+ { PCI_CHIP_MACH64VV, "ATI264VT4 (Mach64 VV)", 230, 83, 83, 100, ATI_CHIP_264VT4 },
+
+ { PCI_CHIP_MACH64GV, "3D RAGE IIC (Mach64 GV, PCI)", 230, 83, 83, 100, ATI_CHIP_264GT2C },
+ { PCI_CHIP_MACH64GW, "3D RAGE IIC (Mach64 GW, AGP)", 230, 83, 83, 100, ATI_CHIP_264GT2C },
+ { PCI_CHIP_MACH64GY, "3D RAGE IIC (Mach64 GY, PCI)", 230, 83, 83, 100, ATI_CHIP_264GT2C },
+ { PCI_CHIP_MACH64GZ, "3D RAGE IIC (Mach64 GZ, AGP)", 230, 83, 83, 100, ATI_CHIP_264GT2C },
+
+ { PCI_CHIP_MACH64GB, "3D RAGE PRO (Mach64 GB, BGA, AGP)", 230, 100, 100, 125, ATI_CHIP_264GTPRO },
+ { PCI_CHIP_MACH64GD, "3D RAGE PRO (Mach64 GD, BGA, AGP 1x)", 230, 100, 100, 125, ATI_CHIP_264GTPRO },
+ { PCI_CHIP_MACH64GI, "3D RAGE PRO (Mach64 GI, BGA, PCI)", 230, 100, 100, 125, ATI_CHIP_264GTPRO | M64F_MAGIC_VRAM_SIZE },
+ { PCI_CHIP_MACH64GP, "3D RAGE PRO (Mach64 GP, PQFP, PCI)", 230, 100, 100, 125, ATI_CHIP_264GTPRO },
+ { PCI_CHIP_MACH64GQ, "3D RAGE PRO (Mach64 GQ, PQFP, PCI, limited 3D)", 230, 100, 100, 125, ATI_CHIP_264GTPRO },
+
+ { PCI_CHIP_MACH64LB, "3D RAGE LT PRO (Mach64 LB, AGP)", 236, 75, 100, 135, ATI_CHIP_264LTPRO },
+ { PCI_CHIP_MACH64LD, "3D RAGE LT PRO (Mach64 LD, AGP)", 230, 100, 100, 135, ATI_CHIP_264LTPRO },
+ { PCI_CHIP_MACH64LI, "3D RAGE LT PRO (Mach64 LI, PCI)", 230, 100, 100, 135, ATI_CHIP_264LTPRO | M64F_G3_PB_1_1 | M64F_G3_PB_1024x768 },
+ { PCI_CHIP_MACH64LP, "3D RAGE LT PRO (Mach64 LP, PCI)", 230, 100, 100, 135, ATI_CHIP_264LTPRO | M64F_G3_PB_1024x768 },
+ { PCI_CHIP_MACH64LQ, "3D RAGE LT PRO (Mach64 LQ, PCI)", 230, 100, 100, 135, ATI_CHIP_264LTPRO },
+
+ { PCI_CHIP_MACH64GM, "3D RAGE XL (Mach64 GM, AGP 2x)", 230, 83, 63, 135, ATI_CHIP_264XL },
+ { PCI_CHIP_MACH64GN, "3D RAGE XC (Mach64 GN, AGP 2x)", 230, 83, 63, 135, ATI_CHIP_264XL },
+ { PCI_CHIP_MACH64GO, "3D RAGE XL (Mach64 GO, PCI-66)", 230, 83, 63, 135, ATI_CHIP_264XL },
+ { PCI_CHIP_MACH64GL, "3D RAGE XC (Mach64 GL, PCI-66)", 230, 83, 63, 135, ATI_CHIP_264XL },
+ { PCI_CHIP_MACH64GR, "3D RAGE XL (Mach64 GR, PCI-33)", 230, 83, 63, 135, ATI_CHIP_264XL | M64F_SDRAM_MAGIC_PLL },
+ { PCI_CHIP_MACH64GS, "3D RAGE XC (Mach64 GS, PCI-33)", 230, 83, 63, 135, ATI_CHIP_264XL },
+
+ { PCI_CHIP_MACH64LM, "3D RAGE Mobility P/M (Mach64 LM, AGP 2x)", 230, 83, 125, 135, ATI_CHIP_MOBILITY },
+ { PCI_CHIP_MACH64LN, "3D RAGE Mobility L (Mach64 LN, AGP 2x)", 230, 83, 125, 135, ATI_CHIP_MOBILITY },
+ { PCI_CHIP_MACH64LR, "3D RAGE Mobility P/M (Mach64 LR, PCI)", 230, 83, 125, 135, ATI_CHIP_MOBILITY },
+ { PCI_CHIP_MACH64LS, "3D RAGE Mobility L (Mach64 LS, PCI)", 230, 83, 125, 135, ATI_CHIP_MOBILITY },
#endif /* CONFIG_FB_ATY_CT */
};
const char *name;
int i;
- for (i = sizeof(aty_chips) / sizeof(*aty_chips) - 1; i >= 0; i--)
+ for (i = ARRAY_SIZE(aty_chips) - 1; i >= 0; i--)
if (par->pci_id == aty_chips[i].pci_id)
break;
par->pll_limits.pll_max = aty_chips[i].pll;
par->pll_limits.mclk = aty_chips[i].mclk;
par->pll_limits.xclk = aty_chips[i].xclk;
+ par->pll_limits.ecp_max = aty_chips[i].ecp_max;
par->features = aty_chips[i].features;
chip_id = aty_ld_le32(CONFIG_CHIP_ID, par);
#endif
#ifdef CONFIG_FB_ATY_CT
case PCI_CHIP_MACH64VT:
- rev &= 0xc7;
- if(rev == 0x00) {
- name = "ATI264VTA3 (Mach64 VT)";
- par->pll_limits.pll_max = 170;
- par->pll_limits.mclk = 67;
- par->pll_limits.xclk = 67;
- par->features = ATI_CHIP_264VT;
- } else if(rev == 0x40) {
- name = "ATI264VTA4 (Mach64 VT)";
+ switch (rev & 0x07) {
+ case 0x00:
+ switch (rev & 0xc0) {
+ case 0x00:
+ name = "ATI264VT (A3) (Mach64 VT)";
+ par->pll_limits.pll_max = 170;
+ par->pll_limits.mclk = 67;
+ par->pll_limits.xclk = 67;
+ par->pll_limits.ecp_max = 80;
+ par->features = ATI_CHIP_264VT;
+ break;
+ case 0x40:
+ name = "ATI264VT2 (A4) (Mach64 VT)";
+ par->pll_limits.pll_max = 200;
+ par->pll_limits.mclk = 67;
+ par->pll_limits.xclk = 67;
+ par->pll_limits.ecp_max = 80;
+ par->features = ATI_CHIP_264VT | M64F_MAGIC_POSTDIV;
+ break;
+ }
+ break;
+ case 0x01:
+ name = "ATI264VT3 (B1) (Mach64 VT)";
par->pll_limits.pll_max = 200;
par->pll_limits.mclk = 67;
par->pll_limits.xclk = 67;
- par->features = ATI_CHIP_264VT | M64F_MAGIC_POSTDIV;
- } else {
- name = "ATI264VTB (Mach64 VT)";
+ par->pll_limits.ecp_max = 80;
+ par->features = ATI_CHIP_264VTB;
+ break;
+ case 0x02:
+ name = "ATI264VT3 (B2) (Mach64 VT)";
par->pll_limits.pll_max = 200;
par->pll_limits.mclk = 67;
par->pll_limits.xclk = 67;
- par->features = ATI_CHIP_264VTB;
+ par->pll_limits.ecp_max = 80;
+ par->features = ATI_CHIP_264VT3;
+ break;
}
break;
case PCI_CHIP_MACH64GT:
- rev &= 0x07;
- if(rev == 0x01) {
+ switch (rev & 0x07) {
+ case 0x01:
+ name = "3D RAGE II (Mach64 GT)";
par->pll_limits.pll_max = 170;
par->pll_limits.mclk = 67;
par->pll_limits.xclk = 67;
+ par->pll_limits.ecp_max = 80;
par->features = ATI_CHIP_264GTB;
- } else if(rev == 0x02) {
+ break;
+ case 0x02:
+ name = "3D RAGE II+ (Mach64 GT)";
par->pll_limits.pll_max = 200;
par->pll_limits.mclk = 67;
par->pll_limits.xclk = 67;
+ par->pll_limits.ecp_max = 100;
par->features = ATI_CHIP_264GTB;
+ break;
}
break;
#endif
* Apple monitor sense
*/
-static int __init read_aty_sense(const struct atyfb_par *par)
+static int __devinit read_aty_sense(const struct atyfb_par *par)
{
int sense, i;
aty_st_lcd(LCD_GEN_CNTL, (crtc->lcd_gen_cntl & ~CRTC_RW_SELECT) |
(SHADOW_EN | SHADOW_RW_EN), par);
- DPRINTK("set secondary CRT to %ix%i %c%c\n",
+ DPRINTK("set shadow CRT to %ix%i %c%c\n",
((((crtc->shadow_h_tot_disp>>16) & 0xff) + 1)<<3), (((crtc->shadow_v_tot_disp>>16) & 0x7ff) + 1),
(crtc->shadow_h_sync_strt_wid & 0x200000)?'N':'P', (crtc->shadow_v_sync_strt_wid & 0x200000)?'N':'P');
know if one is connected. So it's better to fail then.
*/
if (crtc->lcd_gen_cntl & CRT_ON) {
- PRINTKI("Disable lcd panel, because video mode does not fit.\n");
+ if (!(var->activate & FB_ACTIVATE_TEST))
+ PRINTKI("Disable LCD panel, because video mode does not fit.\n");
crtc->lcd_gen_cntl &= ~LCD_ON;
/*aty_st_lcd(LCD_GEN_CNTL, crtc->lcd_gen_cntl, par);*/
} else {
- FAIL("Video mode exceeds size of lcd panel.\nConnect this computer to a conventional monitor if you really need this mode.");
+ if (!(var->activate & FB_ACTIVATE_TEST))
+ PRINTKE("Video mode exceeds size of LCD panel.\nConnect this computer to a conventional monitor if you really need this mode.\n");
+ return -EINVAL;
}
}
}
vmode &= ~(FB_VMODE_DOUBLE | FB_VMODE_INTERLACED);
/* This is horror! When we simulate, say 640x480 on an 800x600
- lcd monitor, the CRTC should be programmed 800x600 values for
+ LCD monitor, the CRTC should be programmed 800x600 values for
the non visible part, but 640x480 for the visible part.
- This code has been tested on a laptop with it's 1400x1050 lcd
+ This code has been tested on a laptop with it's 1400x1050 LCD
monitor and a conventional monitor both switched on.
Tested modes: 1280x1024, 1152x864, 1024x768, 800x600,
works with little glitches also with DOUBLESCAN modes
vdisplay = par->lcd_height;
#endif
- if(vdisplay < 400) {
- h_sync_pol = 1;
- v_sync_pol = 0;
- } else if(vdisplay < 480) {
- h_sync_pol = 0;
- v_sync_pol = 1;
- } else if(vdisplay < 768) {
- h_sync_pol = 0;
- v_sync_pol = 0;
- } else {
- h_sync_pol = 1;
- v_sync_pol = 1;
- }
-
v_disp--;
v_sync_strt--;
v_sync_end--;
vdisplay = yres;
if(vmode & FB_VMODE_DOUBLE)
vdisplay <<= 1;
- if(vmode & FB_VMODE_INTERLACED) {
- vdisplay >>= 1;
-
- /* The prefered mode for the lcd is not interlaced, so disable it if
- it was enabled. For doublescan there is no problem, because we can
- compensate for it in the hardware stretching (we stretch half as much)
- */
- vmode &= ~FB_VMODE_INTERLACED;
- /*crtc->gen_cntl &= ~CRTC_INTERLACE_EN;*/
- }
crtc->gen_cntl &= ~(CRTC2_EN | CRTC2_PIX_WIDTH);
crtc->lcd_gen_cntl &= ~(HORZ_DIVBY2_EN | DIS_HOR_CRT_DIVBY2 |
/*TVCLK_PM_EN | VCLK_DAC_PM_EN |*/
crtc->horz_stretching &=
~(HORZ_STRETCH_RATIO | HORZ_STRETCH_LOOP | AUTO_HORZ_RATIO |
HORZ_STRETCH_MODE | HORZ_STRETCH_EN);
- if (xres < par->lcd_width) {
+ if (xres < par->lcd_width && crtc->lcd_gen_cntl & LCD_ON) {
do {
/*
* The horizontal blender misbehaves when HDisplay is less than a
} while (0);
}
- if (vdisplay < par->lcd_height) {
+ if (vdisplay < par->lcd_height && crtc->lcd_gen_cntl & LCD_ON) {
crtc->vert_stretching = (VERT_STRETCH_USE0 | VERT_STRETCH_EN |
(((vdisplay * (VERT_STRETCH_RATIO0 + 1)) / par->lcd_height) & VERT_STRETCH_RATIO0));
#endif /* CONFIG_FB_ATY_GENERIC_LCD */
if (M64_HAS(MAGIC_FIFO)) {
- /* Not VTB/GTB */
- /* FIXME: magic FIFO values */
- crtc->gen_cntl |= (aty_ld_le32(CRTC_GEN_CNTL, par) & CRTC2_PIX_WIDTH);
+ /* FIXME: display FIFO low watermark values */
+ crtc->gen_cntl |= (aty_ld_le32(CRTC_GEN_CNTL, par) & CRTC_FIFO_LWM);
}
crtc->dp_pix_width = dp_pix_width;
crtc->dp_chain_mask = dp_chain_mask;
var->transp.length = 8;
break;
default:
- FAIL("Invalid pixel width");
+ PRINTKE("Invalid pixel width\n");
+ return -EINVAL;
}
/* output */
pixclock = atyfb_get_pixclock(var, par);
if (pixclock == 0) {
- FAIL("Invalid pixclock");
+ PRINTKE("Invalid pixclock\n");
+ return -EINVAL;
} else {
if((err = par->pll_ops->var_to_pll(info, pixclock, var->bits_per_pixel, &par->pll)))
return err;
par->accel_flags = var->accel_flags; /* hack */
+ if (var->accel_flags) {
+ info->fbops->fb_sync = atyfb_sync;
+ info->flags &= ~FBINFO_HWACCEL_DISABLED;
+ } else {
+ info->fbops->fb_sync = NULL;
+ info->flags |= FBINFO_HWACCEL_DISABLED;
+ }
+
if (par->blitter_may_be_busy)
wait_for_idle(par);
pixclock = atyfb_get_pixclock(var, par);
if (pixclock == 0) {
- FAIL("Invalid pixclock");
+ if (!(var->activate & FB_ACTIVATE_TEST))
+ PRINTKE("Invalid pixclock\n");
+ return -EINVAL;
} else {
if((err = par->pll_ops->var_to_pll(info, pixclock, var->bits_per_pixel, &pll)))
return err;
else
info->var.accel_flags = 0;
-#if 0 /* fbmon is not done. uncomment for 2.5.x -brad */
- if (!fbmon_valid_timings(pixclock, htotal, vtotal, info))
- return -EINVAL;
-#endif
aty_crtc_to_var(&crtc, var);
var->pixclock = par->pll_ops->pll_to_var(info, &pll);
return 0;
return (0);
}
-static irqreturn_t aty_irq(int irq, void *dev_id, struct pt_regs *fp)
+static irqreturn_t aty_irq(int irq, void *dev_id)
{
struct atyfb_par *par = dev_id;
int handled = 0;
u32 int_cntl;
if (!test_and_set_bit(0, &par->irq_flags)) {
- if (request_irq(par->irq, aty_irq, SA_SHIRQ, "atyfb", par)) {
+ if (request_irq(par->irq, aty_irq, IRQF_SHARED, "atyfb", par)) {
clear_bit(0, &par->irq_flags);
return -EINVAL;
}
#define FBIO_WAITFORVSYNC _IOW('F', 0x20, __u32)
#endif
-static int atyfb_ioctl(struct inode *inode, struct file *file, u_int cmd,
- u_long arg, struct fb_info *info)
+static int atyfb_ioctl(struct fb_info *info, u_int cmd, u_long arg)
{
struct atyfb_par *par = (struct atyfb_par *) info->par;
#ifdef __sparc__
}
#ifdef __sparc__
-static int atyfb_mmap(struct fb_info *info, struct file *file, struct vm_area_struct *vma)
+static int atyfb_mmap(struct fb_info *info, struct vm_area_struct *vma)
{
struct atyfb_par *par = (struct atyfb_par *) info->par;
unsigned int size, page, map_size = 0;
aty_st_8(DAC_CNTL, tmp, par);
aty_st_8(DAC_MASK, 0xff, par);
- writeb(i, &par->aty_cmap_regs->rindex);
- atyfb_save.r[enter][i] = readb(&par->aty_cmap_regs->lut);
- atyfb_save.g[enter][i] = readb(&par->aty_cmap_regs->lut);
- atyfb_save.b[enter][i] = readb(&par->aty_cmap_regs->lut);
- writeb(i, &par->aty_cmap_regs->windex);
- writeb(atyfb_save.r[1 - enter][i],
- &par->aty_cmap_regs->lut);
- writeb(atyfb_save.g[1 - enter][i],
- &par->aty_cmap_regs->lut);
- writeb(atyfb_save.b[1 - enter][i],
- &par->aty_cmap_regs->lut);
+ aty_st_8(DAC_R_INDEX, i, par);
+ atyfb_save.r[enter][i] = aty_ld_8(DAC_DATA, par);
+ atyfb_save.g[enter][i] = aty_ld_8(DAC_DATA, par);
+ atyfb_save.b[enter][i] = aty_ld_8(DAC_DATA, par);
+ aty_st_8(DAC_W_INDEX, i, par);
+ aty_st_8(DAC_DATA, atyfb_save.r[1 - enter][i], par);
+ aty_st_8(DAC_DATA, atyfb_save.g[1 - enter][i], par);
+ aty_st_8(DAC_DATA, atyfb_save.b[1 - enter][i], par);
}
}
#if defined(CONFIG_PM) && defined(CONFIG_PCI)
+#ifdef CONFIG_PPC_PMAC
/* Power management routines. Those are used for PowerBook sleep.
*/
static int aty_power_mgmt(int sleep, struct atyfb_par *par)
return timeout ? 0 : -EIO;
}
+#endif
static int atyfb_pci_suspend(struct pci_dev *pdev, pm_message_t state)
{
struct fb_info *info = pci_get_drvdata(pdev);
struct atyfb_par *par = (struct atyfb_par *) info->par;
-#ifdef CONFIG_PPC_PMAC
- /* HACK ALERT ! Once I find a proper way to say to each driver
- * individually what will happen with it's PCI slot, I'll change
- * that. On laptops, the AGP slot is just unclocked, so D2 is
- * expected, while on desktops, the card is powered off
- */
- if (state >= 3)
- state = 2;
-#endif /* CONFIG_PPC_PMAC */
-
- if (state != 2 || state == pdev->dev.power.power_state)
+ if (state.event == pdev->dev.power.power_state.event)
return 0;
acquire_console_sem();
par->asleep = 1;
par->lock_blank = 1;
+#ifdef CONFIG_PPC_PMAC
/* Set chip to "suspend" mode */
if (aty_power_mgmt(1, par)) {
par->asleep = 0;
release_console_sem();
return -EIO;
}
+#else
+ pci_set_power_state(pdev, pci_choose_state(pdev, state));
+#endif
release_console_sem();
struct fb_info *info = pci_get_drvdata(pdev);
struct atyfb_par *par = (struct atyfb_par *) info->par;
- if (pdev->dev.power.power_state == 0)
+ if (pdev->dev.power.power_state.event == PM_EVENT_ON)
return 0;
acquire_console_sem();
- if (pdev->dev.power.power_state == 2)
+#ifdef CONFIG_PPC_PMAC
+ if (pdev->dev.power.power_state.event == 2)
aty_power_mgmt(0, par);
+#else
+ pci_set_power_state(pdev, PCI_D0);
+#endif
+
+ aty_resume_chip(info);
+
par->asleep = 0;
/* Restore display */
#endif /* defined(CONFIG_PM) && defined(CONFIG_PCI) */
-#ifdef CONFIG_PMAC_BACKLIGHT
+/* Backlight */
+#ifdef CONFIG_FB_ATY_BACKLIGHT
+#define MAX_LEVEL 0xFF
- /*
- * LCD backlight control
- */
+static struct backlight_properties aty_bl_data;
-static int backlight_conv[] = {
- 0x00, 0x3f, 0x4c, 0x59, 0x66, 0x73, 0x80, 0x8d,
- 0x9a, 0xa7, 0xb4, 0xc1, 0xcf, 0xdc, 0xe9, 0xff
-};
+/* Call with fb_info->bl_mutex held */
+static int aty_bl_get_level_brightness(struct atyfb_par *par, int level)
+{
+ struct fb_info *info = pci_get_drvdata(par->pdev);
+ int atylevel;
-static int aty_set_backlight_enable(int on, int level, void *data)
+ /* Get and convert the value */
+ atylevel = info->bl_curve[level] * FB_BACKLIGHT_MAX / MAX_LEVEL;
+
+ if (atylevel < 0)
+ atylevel = 0;
+ else if (atylevel > MAX_LEVEL)
+ atylevel = MAX_LEVEL;
+
+ return atylevel;
+}
+
+/* Call with fb_info->bl_mutex held */
+static int __aty_bl_update_status(struct backlight_device *bd)
{
- struct fb_info *info = (struct fb_info *) data;
- struct atyfb_par *par = (struct atyfb_par *) info->par;
+ struct atyfb_par *par = class_get_devdata(&bd->class_dev);
unsigned int reg = aty_ld_lcd(LCD_MISC_CNTL, par);
+ int level;
+
+ if (bd->props->power != FB_BLANK_UNBLANK ||
+ bd->props->fb_blank != FB_BLANK_UNBLANK)
+ level = 0;
+ else
+ level = bd->props->brightness;
reg |= (BLMOD_EN | BIASMOD_EN);
- if (on && level > BACKLIGHT_OFF) {
+ if (level > 0) {
reg &= ~BIAS_MOD_LEVEL_MASK;
- reg |= (backlight_conv[level] << BIAS_MOD_LEVEL_SHIFT);
+ reg |= (aty_bl_get_level_brightness(par, level) << BIAS_MOD_LEVEL_SHIFT);
} else {
reg &= ~BIAS_MOD_LEVEL_MASK;
- reg |= (backlight_conv[0] << BIAS_MOD_LEVEL_SHIFT);
+ reg |= (aty_bl_get_level_brightness(par, 0) << BIAS_MOD_LEVEL_SHIFT);
}
aty_st_lcd(LCD_MISC_CNTL, reg, par);
+
return 0;
}
-static int aty_set_backlight_level(int level, void *data)
+static int aty_bl_update_status(struct backlight_device *bd)
+{
+ struct atyfb_par *par = class_get_devdata(&bd->class_dev);
+ struct fb_info *info = pci_get_drvdata(par->pdev);
+ int ret;
+
+ mutex_lock(&info->bl_mutex);
+ ret = __aty_bl_update_status(bd);
+ mutex_unlock(&info->bl_mutex);
+
+ return ret;
+}
+
+static int aty_bl_get_brightness(struct backlight_device *bd)
{
- return aty_set_backlight_enable(1, level, data);
+ return bd->props->brightness;
}
-static struct backlight_controller aty_backlight_controller = {
- aty_set_backlight_enable,
- aty_set_backlight_level
+static struct backlight_properties aty_bl_data = {
+ .owner = THIS_MODULE,
+ .get_brightness = aty_bl_get_brightness,
+ .update_status = aty_bl_update_status,
+ .max_brightness = (FB_BACKLIGHT_LEVELS - 1),
};
-#endif /* CONFIG_PMAC_BACKLIGHT */
-static void __init aty_calc_mem_refresh(struct atyfb_par *par, int xclk)
+static void aty_bl_set_power(struct fb_info *info, int power)
+{
+ mutex_lock(&info->bl_mutex);
+
+ if (info->bl_dev) {
+ down(&info->bl_dev->sem);
+ info->bl_dev->props->power = power;
+ __aty_bl_update_status(info->bl_dev);
+ up(&info->bl_dev->sem);
+ }
+
+ mutex_unlock(&info->bl_mutex);
+}
+
+static void aty_bl_init(struct atyfb_par *par)
+{
+ struct fb_info *info = pci_get_drvdata(par->pdev);
+ struct backlight_device *bd;
+ char name[12];
+
+#ifdef CONFIG_PMAC_BACKLIGHT
+ if (!pmac_has_backlight_type("ati"))
+ return;
+#endif
+
+ snprintf(name, sizeof(name), "atybl%d", info->node);
+
+ bd = backlight_device_register(name, info->dev, par, &aty_bl_data);
+ if (IS_ERR(bd)) {
+ info->bl_dev = NULL;
+ printk(KERN_WARNING "aty: Backlight registration failed\n");
+ goto error;
+ }
+
+ mutex_lock(&info->bl_mutex);
+ info->bl_dev = bd;
+ fb_bl_default_curve(info, 0,
+ 0x3F * FB_BACKLIGHT_MAX / MAX_LEVEL,
+ 0xFF * FB_BACKLIGHT_MAX / MAX_LEVEL);
+ mutex_unlock(&info->bl_mutex);
+
+ down(&bd->sem);
+ bd->props->brightness = aty_bl_data.max_brightness;
+ bd->props->power = FB_BLANK_UNBLANK;
+ bd->props->update_status(bd);
+ up(&bd->sem);
+
+#ifdef CONFIG_PMAC_BACKLIGHT
+ mutex_lock(&pmac_backlight_mutex);
+ if (!pmac_backlight)
+ pmac_backlight = bd;
+ mutex_unlock(&pmac_backlight_mutex);
+#endif
+
+ printk("aty: Backlight initialized (%s)\n", name);
+
+ return;
+
+error:
+ return;
+}
+
+static void aty_bl_exit(struct atyfb_par *par)
+{
+ struct fb_info *info = pci_get_drvdata(par->pdev);
+
+#ifdef CONFIG_PMAC_BACKLIGHT
+ mutex_lock(&pmac_backlight_mutex);
+#endif
+
+ mutex_lock(&info->bl_mutex);
+ if (info->bl_dev) {
+#ifdef CONFIG_PMAC_BACKLIGHT
+ if (pmac_backlight == info->bl_dev)
+ pmac_backlight = NULL;
+#endif
+
+ backlight_device_unregister(info->bl_dev);
+
+ printk("aty: Backlight unloaded\n");
+ }
+ mutex_unlock(&info->bl_mutex);
+
+#ifdef CONFIG_PMAC_BACKLIGHT
+ mutex_unlock(&pmac_backlight_mutex);
+#endif
+}
+
+#endif /* CONFIG_FB_ATY_BACKLIGHT */
+
+static void __devinit aty_calc_mem_refresh(struct atyfb_par *par, int xclk)
{
const int ragepro_tbl[] = {
44, 50, 55, 66, 75, 80, 100
if (IS_XL(par->pci_id) || IS_MOBILITY(par->pci_id)) {
refresh_tbl = ragexl_tbl;
- size = sizeof(ragexl_tbl)/sizeof(int);
+ size = ARRAY_SIZE(ragexl_tbl);
} else {
refresh_tbl = ragepro_tbl;
- size = sizeof(ragepro_tbl)/sizeof(int);
+ size = ARRAY_SIZE(ragepro_tbl);
}
for (i=0; i < size; i++) {
static struct fb_info *fb_list = NULL;
-static int __init aty_init(struct fb_info *info, const char *name)
+#if defined(__i386__) && defined(CONFIG_FB_ATY_GENERIC_LCD)
+static int __devinit atyfb_get_timings_from_lcd(struct atyfb_par *par,
+ struct fb_var_screeninfo *var)
+{
+ int ret = -EINVAL;
+
+ if (par->lcd_table != 0 && (aty_ld_lcd(LCD_GEN_CNTL, par) & LCD_ON)) {
+ *var = default_var;
+ var->xres = var->xres_virtual = par->lcd_hdisp;
+ var->right_margin = par->lcd_right_margin;
+ var->left_margin = par->lcd_hblank_len -
+ (par->lcd_right_margin + par->lcd_hsync_dly +
+ par->lcd_hsync_len);
+ var->hsync_len = par->lcd_hsync_len + par->lcd_hsync_dly;
+ var->yres = var->yres_virtual = par->lcd_vdisp;
+ var->lower_margin = par->lcd_lower_margin;
+ var->upper_margin = par->lcd_vblank_len -
+ (par->lcd_lower_margin + par->lcd_vsync_len);
+ var->vsync_len = par->lcd_vsync_len;
+ var->pixclock = par->lcd_pixclock;
+ ret = 0;
+ }
+
+ return ret;
+}
+#endif /* defined(__i386__) && defined(CONFIG_FB_ATY_GENERIC_LCD) */
+
+static int __devinit aty_init(struct fb_info *info)
{
struct atyfb_par *par = (struct atyfb_par *) info->par;
const char *ramname = NULL, *xtal;
- int gtb_memsize;
+ int gtb_memsize, has_var = 0;
struct fb_var_screeninfo var;
- u8 pll_ref_div;
- u32 i;
-#if defined(CONFIG_PPC)
- int sense;
-#endif
init_waitqueue_head(&par->vblank.wait);
spin_lock_init(&par->int_lock);
- par->aty_cmap_regs =
- (struct aty_cmap_regs __iomem *) (par->ati_regbase + 0xc0);
-
#ifdef CONFIG_PPC_PMAC
/* The Apple iBook1 uses non-standard memory frequencies. We detect it
* and set the frequency manually. */
break;
}
switch (clk_type) {
+#ifdef CONFIG_ATARI
case CLK_ATI18818_1:
par->pll_ops = &aty_pll_ati18818_1;
break;
+#else
+ case CLK_IBMRGB514:
+ par->pll_ops = &aty_pll_ibm514;
+ break;
+#endif
+#if 0 /* dead code */
case CLK_STG1703:
par->pll_ops = &aty_pll_stg1703;
break;
case CLK_ATT20C408:
par->pll_ops = &aty_pll_att20c408;
break;
- case CLK_IBMRGB514:
- par->pll_ops = &aty_pll_ibm514;
- break;
+#endif
default:
PRINTKI("aty_init: CLK type not implemented yet!");
par->pll_ops = &aty_pll_unsupported;
par->dac_ops = &aty_dac_ct;
par->pll_ops = &aty_pll_ct;
par->bus_type = PCI;
-#ifdef CONFIG_FB_ATY_XL_INIT
- if (IS_XL(par->pci_id))
- atyfb_xl_init(info);
-#endif
par->ram_type = (aty_ld_le32(CONFIG_STAT0, par) & 0x07);
ramname = aty_ct_ram[par->ram_type];
/* for many chips, the mclk is 67 MHz for SDRAM, 63 MHz otherwise */
par->pll_limits.mclk = 63;
}
- if (M64_HAS(GTB_DSP)
- && (pll_ref_div = aty_ld_pll_ct(PLL_REF_DIV, par))) {
- int diff1, diff2;
- diff1 = 510 * 14 / pll_ref_div - par->pll_limits.pll_max;
- diff2 = 510 * 29 / pll_ref_div - par->pll_limits.pll_max;
- if (diff1 < 0)
- diff1 = -diff1;
- if (diff2 < 0)
- diff2 = -diff2;
- if (diff2 < diff1) {
- par->ref_clk_per = 1000000000000ULL / 29498928;
- xtal = "29.498928";
+ if (M64_HAS(GTB_DSP)) {
+ u8 pll_ref_div = aty_ld_pll_ct(PLL_REF_DIV, par);
+
+ if (pll_ref_div) {
+ int diff1, diff2;
+ diff1 = 510 * 14 / pll_ref_div - par->pll_limits.pll_max;
+ diff2 = 510 * 29 / pll_ref_div - par->pll_limits.pll_max;
+ if (diff1 < 0)
+ diff1 = -diff1;
+ if (diff2 < 0)
+ diff2 = -diff2;
+ if (diff2 < diff1) {
+ par->ref_clk_per = 1000000000000ULL / 29498928;
+ xtal = "29.498928";
+ }
}
}
#endif /* CONFIG_FB_ATY_CT */
if(par->pll_ops->get_pll)
par->pll_ops->get_pll(info, &saved_pll);
- i = aty_ld_le32(MEM_CNTL, par);
+ par->mem_cntl = aty_ld_le32(MEM_CNTL, par);
gtb_memsize = M64_HAS(GTB_DSP);
if (gtb_memsize)
- switch (i & 0xF) { /* 0xF used instead of MEM_SIZE_ALIAS */
+ switch (par->mem_cntl & 0xF) { /* 0xF used instead of MEM_SIZE_ALIAS */
case MEM_SIZE_512K:
info->fix.smem_len = 0x80000;
break;
default:
info->fix.smem_len = 0x80000;
} else
- switch (i & MEM_SIZE_ALIAS) {
+ switch (par->mem_cntl & MEM_SIZE_ALIAS) {
case MEM_SIZE_512K:
info->fix.smem_len = 0x80000;
break;
if (vram) {
info->fix.smem_len = vram * 1024;
- i = i & ~(gtb_memsize ? 0xF : MEM_SIZE_ALIAS);
+ par->mem_cntl &= ~(gtb_memsize ? 0xF : MEM_SIZE_ALIAS);
if (info->fix.smem_len <= 0x80000)
- i |= MEM_SIZE_512K;
+ par->mem_cntl |= MEM_SIZE_512K;
else if (info->fix.smem_len <= 0x100000)
- i |= MEM_SIZE_1M;
+ par->mem_cntl |= MEM_SIZE_1M;
else if (info->fix.smem_len <= 0x200000)
- i |= gtb_memsize ? MEM_SIZE_2M_GTB : MEM_SIZE_2M;
+ par->mem_cntl |= gtb_memsize ? MEM_SIZE_2M_GTB : MEM_SIZE_2M;
else if (info->fix.smem_len <= 0x400000)
- i |= gtb_memsize ? MEM_SIZE_4M_GTB : MEM_SIZE_4M;
+ par->mem_cntl |= gtb_memsize ? MEM_SIZE_4M_GTB : MEM_SIZE_4M;
else if (info->fix.smem_len <= 0x600000)
- i |= gtb_memsize ? MEM_SIZE_6M_GTB : MEM_SIZE_6M;
+ par->mem_cntl |= gtb_memsize ? MEM_SIZE_6M_GTB : MEM_SIZE_6M;
else
- i |= gtb_memsize ? MEM_SIZE_8M_GTB : MEM_SIZE_8M;
- aty_st_le32(MEM_CNTL, i, par);
+ par->mem_cntl |= gtb_memsize ? MEM_SIZE_8M_GTB : MEM_SIZE_8M;
+ aty_st_le32(MEM_CNTL, par->mem_cntl, par);
}
/*
#endif
if(par->pll_ops->init_pll)
par->pll_ops->init_pll(info, &par->pll);
+ if (par->pll_ops->resume_pll)
+ par->pll_ops->resume_pll(info, &par->pll);
/*
- * Last page of 8 MB (4 MB on ISA) aperture is MMIO
- * FIXME: we should use the auxiliary aperture instead so we can access
- * the full 8 MB of video RAM on 8 MB boards
+ * Last page of 8 MB (4 MB on ISA) aperture is MMIO,
+ * unless the auxiliary register aperture is used.
*/
if (!par->aux_start &&
info->fbops = &atyfb_ops;
info->pseudo_palette = pseudo_palette;
- info->flags = FBINFO_FLAG_DEFAULT;
+ info->flags = FBINFO_DEFAULT |
+ FBINFO_HWACCEL_IMAGEBLIT |
+ FBINFO_HWACCEL_FILLRECT |
+ FBINFO_HWACCEL_COPYAREA |
+ FBINFO_HWACCEL_YPAN;
#ifdef CONFIG_PMAC_BACKLIGHT
if (M64_HAS(G3_PB_1_1) && machine_is_compatible("PowerBook1,1")) {
/* these bits let the 101 powerbook wake up from sleep -- paulus */
aty_st_lcd(POWER_MANAGEMENT, aty_ld_lcd(POWER_MANAGEMENT, par)
| (USE_F32KHZ | TRISTATE_MEM_EN), par);
- } else if (M64_HAS(MOBIL_BUS))
- register_backlight_controller(&aty_backlight_controller, info, "ati");
-#endif /* CONFIG_PMAC_BACKLIGHT */
+ } else
+#endif
+ if (M64_HAS(MOBIL_BUS)) {
+#ifdef CONFIG_FB_ATY_BACKLIGHT
+ aty_bl_init (par);
+#endif
+ }
memset(&var, 0, sizeof(var));
#ifdef CONFIG_PPC
- if (_machine == _MACH_Pmac) {
+ if (machine_is(powermac)) {
/*
* FIXME: The NVRAM stuff should be put in a Mac-specific file, as it
* applies to all Mac video cards
*/
if (mode) {
- if (!mac_find_mode(&var, info, mode, 8))
- var = default_var;
+ if (mac_find_mode(&var, info, mode, 8))
+ has_var = 1;
} else {
if (default_vmode == VMODE_CHOOSE) {
+ int sense;
if (M64_HAS(G3_PB_1024x768))
/* G3 PowerBook with 1024x768 LCD */
default_vmode = VMODE_1024_768_60;
default_vmode = VMODE_640_480_60;
if (default_cmode < CMODE_8 || default_cmode > CMODE_32)
default_cmode = CMODE_8;
- if (mac_vmode_to_var(default_vmode, default_cmode, &var))
- var = default_var;
+ if (!mac_vmode_to_var(default_vmode, default_cmode,
+ &var))
+ has_var = 1;
}
- } else
+ }
+
#endif /* !CONFIG_PPC */
- if (
-#if defined(CONFIG_SPARC32) || defined(CONFIG_SPARC64)
- /* On Sparc, unless the user gave a specific mode
- * specification, use the PROM probed values in
- * default_var.
- */
- !mode ||
-#endif
- !fb_find_mode(&var, info, mode, NULL, 0, &defmode, 8))
+
+#if defined(__i386__) && defined(CONFIG_FB_ATY_GENERIC_LCD)
+ if (!atyfb_get_timings_from_lcd(par, &var))
+ has_var = 1;
+#endif
+
+ if (mode && fb_find_mode(&var, info, mode, NULL, 0, &defmode, 8))
+ has_var = 1;
+
+ if (!has_var)
var = default_var;
if (noaccel)
fb_list = info;
PRINTKI("fb%d: %s frame buffer device on %s\n",
- info->node, info->fix.id, name);
+ info->node, info->fix.id, par->bus_type == ISA ? "ISA" : "PCI");
return 0;
aty_init_exit:
return -1;
}
+static void aty_resume_chip(struct fb_info *info)
+{
+ struct atyfb_par *par = info->par;
+
+ aty_st_le32(MEM_CNTL, par->mem_cntl, par);
+
+ if (par->pll_ops->resume_pll)
+ par->pll_ops->resume_pll(info, &par->pll);
+
+ if (par->aux_start)
+ aty_st_le32(BUS_CNTL, aty_ld_le32(BUS_CNTL, par) | BUS_APER_REG_DIS, par);
+}
+
#ifdef CONFIG_ATARI
-static int __init store_video_par(char *video_str, unsigned char m64_num)
+static int __devinit store_video_par(char *video_str, unsigned char m64_num)
{
char *p;
unsigned long vmembase, size, guiregbase;
static int atyfb_blank(int blank, struct fb_info *info)
{
struct atyfb_par *par = (struct atyfb_par *) info->par;
- u8 gen_cntl;
+ u32 gen_cntl;
if (par->lock_blank || par->asleep)
return 0;
-#ifdef CONFIG_PMAC_BACKLIGHT
- if ((_machine == _MACH_Pmac) && blank)
- set_backlight_enable(0);
+#ifdef CONFIG_FB_ATY_BACKLIGHT
+ if (machine_is(powermac) && blank > FB_BLANK_NORMAL)
+ aty_bl_set_power(info, FB_BLANK_POWERDOWN);
#elif defined(CONFIG_FB_ATY_GENERIC_LCD)
- if (par->lcd_table && blank &&
+ if (par->lcd_table && blank > FB_BLANK_NORMAL &&
(aty_ld_lcd(LCD_GEN_CNTL, par) & LCD_ON)) {
u32 pm = aty_ld_lcd(POWER_MANAGEMENT, par);
pm &= ~PWR_BLON;
}
#endif
- gen_cntl = aty_ld_8(CRTC_GEN_CNTL, par);
+ gen_cntl = aty_ld_le32(CRTC_GEN_CNTL, par);
+ gen_cntl &= ~0x400004c;
switch (blank) {
- case FB_BLANK_UNBLANK:
- gen_cntl &= ~(0x4c);
+ case FB_BLANK_UNBLANK:
break;
case FB_BLANK_NORMAL:
- gen_cntl |= 0x40;
+ gen_cntl |= 0x4000040;
break;
case FB_BLANK_VSYNC_SUSPEND:
- gen_cntl |= 0x8;
+ gen_cntl |= 0x4000048;
break;
case FB_BLANK_HSYNC_SUSPEND:
- gen_cntl |= 0x4;
+ gen_cntl |= 0x4000044;
break;
case FB_BLANK_POWERDOWN:
- gen_cntl |= 0x4c;
+ gen_cntl |= 0x400004c;
break;
}
- aty_st_8(CRTC_GEN_CNTL, gen_cntl, par);
+ aty_st_le32(CRTC_GEN_CNTL, gen_cntl, par);
-#ifdef CONFIG_PMAC_BACKLIGHT
- if ((_machine == _MACH_Pmac) && !blank)
- set_backlight_enable(1);
+#ifdef CONFIG_FB_ATY_BACKLIGHT
+ if (machine_is(powermac) && blank <= FB_BLANK_NORMAL)
+ aty_bl_set_power(info, FB_BLANK_UNBLANK);
#elif defined(CONFIG_FB_ATY_GENERIC_LCD)
- if (par->lcd_table && !blank &&
+ if (par->lcd_table && blank <= FB_BLANK_NORMAL &&
(aty_ld_lcd(LCD_GEN_CNTL, par) & LCD_ON)) {
u32 pm = aty_ld_lcd(POWER_MANAGEMENT, par);
pm |= PWR_BLON;
static void aty_st_pal(u_int regno, u_int red, u_int green, u_int blue,
const struct atyfb_par *par)
{
-#ifdef CONFIG_ATARI
- out_8(&par->aty_cmap_regs->windex, regno);
- out_8(&par->aty_cmap_regs->lut, red);
- out_8(&par->aty_cmap_regs->lut, green);
- out_8(&par->aty_cmap_regs->lut, blue);
-#else
- writeb(regno, &par->aty_cmap_regs->windex);
- writeb(red, &par->aty_cmap_regs->lut);
- writeb(green, &par->aty_cmap_regs->lut);
- writeb(blue, &par->aty_cmap_regs->lut);
-#endif
+ aty_st_8(DAC_W_INDEX, regno, par);
+ aty_st_8(DAC_DATA, red, par);
+ aty_st_8(DAC_DATA, green, par);
+ aty_st_8(DAC_DATA, blue, par);
}
/*
}
pcp = pdev->sysdata;
- if (node == pcp->prom_node) {
+ if (node == pcp->prom_node->node) {
struct fb_var_screeninfo *var = &default_var;
unsigned int N, P, Q, M, T, R;
u32 v_total, h_total;
#ifdef __i386__
#ifdef CONFIG_FB_ATY_GENERIC_LCD
-static void aty_init_lcd(struct atyfb_par *par, u32 bios_base)
+static void __devinit aty_init_lcd(struct atyfb_par *par, u32 bios_base)
{
u32 driv_inf_tab, sig;
u16 lcd_ofs;
refresh_rates_buf, lcd_refresh_rates[default_refresh_rate]);
par->lcd_refreshrate = lcd_refresh_rates[default_refresh_rate];
/* We now need to determine the crtc parameters for the
- * lcd monitor. This is tricky, because they are not stored
+ * LCD monitor. This is tricky, because they are not stored
* individually in the BIOS. Instead, the BIOS contains a
* table of display modes that work for this monitor.
*
* The idea is that we search for a mode of the same dimensions
- * as the dimensions of the lcd monitor. Say our lcd monitor
+ * as the dimensions of the LCD monitor. Say our LCD monitor
* is 800x600 pixels, we search for a 800x600 monitor.
* The CRTC parameters we find here are the ones that we need
- * to use to simulate other resolutions on the lcd screen.
+ * to use to simulate other resolutions on the LCD screen.
*/
lcdmodeptr = (u16 *)(par->lcd_table + 64);
while (*lcdmodeptr != 0) {
atyfb_setup_generic_fail:
iounmap(par->ati_regbase);
par->ati_regbase = NULL;
+ if (info->screen_base) {
+ iounmap(info->screen_base);
+ info->screen_base = NULL;
+ }
return ret;
}
struct atyfb_par *par;
int i, rc = -ENOMEM;
- for (i = sizeof(aty_chips) / sizeof(*aty_chips) - 1; i >= 0; i--)
+ for (i = ARRAY_SIZE(aty_chips) - 1; i >= 0; i--)
if (pdev->device == aty_chips[i].pci_id)
break;
par->res_start = res_start;
par->res_size = res_size;
par->irq = pdev->irq;
+ par->pdev = pdev;
/* Setup "info" structure */
#ifdef __sparc__
pci_set_drvdata(pdev, info);
/* Init chip & register framebuffer */
- if (aty_init(info, "PCI"))
+ if (aty_init(info))
goto err_release_io;
#ifdef __sparc__
#ifdef CONFIG_ATARI
-static int __devinit atyfb_atari_probe(void)
+static int __init atyfb_atari_probe(void)
{
- struct aty_par *par;
+ struct atyfb_par *par;
struct fb_info *info;
int m64_num;
u32 clock_r;
+ int num_found = 0;
for (m64_num = 0; m64_num < mach64_count; m64_num++) {
if (!phys_vmembase[m64_num] || !phys_size[m64_num] ||
break;
}
- if (aty_init(info, "ISA bus")) {
+ /* Fake pci_id for correct_chipset() */
+ switch (aty_ld_le32(CONFIG_CHIP_ID, par) & CFG_CHIP_TYPE) {
+ case 0x00d7:
+ par->pci_id = PCI_CHIP_MACH64GX;
+ break;
+ case 0x0057:
+ par->pci_id = PCI_CHIP_MACH64CX;
+ break;
+ default:
+ break;
+ }
+
+ if (correct_chipset(par) || aty_init(info)) {
+ iounmap(info->screen_base);
+ iounmap(par->ati_regbase);
framebuffer_release(info);
- /* This is insufficient! kernel_map has added two large chunks!! */
- return -ENXIO;
+ } else {
+ num_found++;
}
}
+
+ return num_found ? 0 : -ENXIO;
}
#endif /* CONFIG_ATARI */
+#ifdef CONFIG_PCI
+
static void __devexit atyfb_remove(struct fb_info *info)
{
struct atyfb_par *par = (struct atyfb_par *) info->par;
aty_set_crtc(par, &saved_crtc);
par->pll_ops->set_pll(info, &saved_pll);
+#ifdef CONFIG_FB_ATY_BACKLIGHT
+ if (M64_HAS(MOBIL_BUS))
+ aty_bl_exit(par);
+#endif
+
unregister_framebuffer(info);
#ifdef CONFIG_MTRR
framebuffer_release(info);
}
-#ifdef CONFIG_PCI
static void __devexit atyfb_pci_remove(struct pci_dev *pdev)
{
static int __init atyfb_init(void)
{
+ int err1 = 1, err2 = 1;
#ifndef MODULE
char *option = NULL;
#endif
#ifdef CONFIG_PCI
- pci_register_driver(&atyfb_driver);
+ err1 = pci_register_driver(&atyfb_driver);
#endif
#ifdef CONFIG_ATARI
- atyfb_atari_probe();
+ err2 = atyfb_atari_probe();
#endif
- return 0;
+
+ return (err1 && err2) ? -ENODEV : 0;
}
static void __exit atyfb_exit(void)