*/
#include <linux/fb.h>
-#include <linux/delay.h>
+
#include <asm/io.h>
+
#include <video/mach64.h>
#include "atyfb.h"
-#undef DEBUG
-static int aty_valid_pll_ct (const struct fb_info *info, u32 vclk_per, struct pll_ct *pll);
-static int aty_dsp_gt (const struct fb_info *info, u32 bpp, struct pll_ct *pll);
-static int aty_var_to_pll_ct(const struct fb_info *info, u32 vclk_per, u32 bpp, union aty_pll *pll);
-static u32 aty_pll_to_var_ct(const struct fb_info *info, const union aty_pll *pll);
+/* FIXME: remove the FAIL definition */
+#define FAIL(x) do { printk(x "\n"); return -EINVAL; } while (0)
-u8 aty_ld_pll_ct(int offset, const struct atyfb_par *par)
-{
- u8 res;
+static void aty_st_pll(int offset, u8 val, const struct atyfb_par *par);
+static int aty_valid_pll_ct(const struct fb_info *info, u32 vclk_per,
+ struct pll_ct *pll);
+static int aty_dsp_gt(const struct fb_info *info, u8 bpp,
+ struct pll_ct *pll);
+static int aty_var_to_pll_ct(const struct fb_info *info, u32 vclk_per,
+ u8 bpp, union aty_pll *pll);
+static u32 aty_pll_ct_to_var(const struct fb_info *info,
+ const union aty_pll *pll);
- /* write addr byte */
- aty_st_8(CLOCK_CNTL_ADDR, (offset << 2) & PLL_ADDR, par);
- /* read the register value */
- res = aty_ld_8(CLOCK_CNTL_DATA, par);
- return res;
-}
-void aty_st_pll_ct(int offset, u8 val, const struct atyfb_par *par)
+
+static void aty_st_pll(int offset, u8 val, const struct atyfb_par *par)
{
/* write addr byte */
- aty_st_8(CLOCK_CNTL_ADDR, ((offset << 2) & PLL_ADDR) | PLL_WR_EN, par);
+ aty_st_8(CLOCK_CNTL + 1, (offset << 2) | PLL_WR_EN, par);
/* write the register value */
- aty_st_8(CLOCK_CNTL_DATA, val & PLL_DATA, par);
- aty_st_8(CLOCK_CNTL_ADDR, ((offset << 2) & PLL_ADDR) & ~PLL_WR_EN, par);
+ aty_st_8(CLOCK_CNTL + 2, val, par);
+ aty_st_8(CLOCK_CNTL + 1, (offset << 2) & ~PLL_WR_EN, par);
}
-/*
- * by Daniel Mantione
- * <daniel.mantione@freepascal.org>
- *
- *
- * ATI Mach64 CT clock synthesis description.
- *
- * All clocks on the Mach64 can be calculated using the same principle:
- *
- * XTALIN * x * FB_DIV
- * CLK = ----------------------
- * PLL_REF_DIV * POST_DIV
- *
- * XTALIN is a fixed speed clock. Common speeds are 14.31 MHz and 29.50 MHz.
- * PLL_REF_DIV can be set by the user, but is the same for all clocks.
- * FB_DIV can be set by the user for each clock individually, it should be set
- * between 128 and 255, the chip will generate a bad clock signal for too low
- * values.
- * x depends on the type of clock; usually it is 2, but for the MCLK it can also
- * be set to 4.
- * POST_DIV can be set by the user for each clock individually, Possible values
- * are 1,2,4,8 and for some clocks other values are available too.
- * CLK is of course the clock speed that is generated.
- *
- * The Mach64 has these clocks:
- *
- * MCLK The clock rate of the chip
- * XCLK The clock rate of the on-chip memory
- * VCLK0 First pixel clock of first CRT controller
- * VCLK1 Second pixel clock of first CRT controller
- * VCLK2 Third pixel clock of first CRT controller
- * VCLK3 Fourth pixel clock of first CRT controller
- * VCLK Selected pixel clock, one of VCLK0, VCLK1, VCLK2, VCLK3
- * V2CLK Pixel clock of the second CRT controller.
- * SCLK Multi-purpose clock
- *
- * - MCLK and XCLK use the same FB_DIV
- * - VCLK0 .. VCLK3 use the same FB_DIV
- * - V2CLK is needed when the second CRTC is used (can be used for dualhead);
- * i.e. CRT monitor connected to laptop has different resolution than built
- * in LCD monitor.
- * - SCLK is not available on all cards; it is know to exist on the Rage LT-PRO,
- * Rage XL and Rage Mobility. It is know not to exist on the Mach64 VT.
- * - V2CLK is not available on all cards, most likely only the Rage LT-PRO,
- * the Rage XL and the Rage Mobility
- *
- * SCLK can be used to:
- * - Clock the chip instead of MCLK
- * - Replace XTALIN with a user defined frequency
- * - Generate the pixel clock for the LCD monitor (instead of VCLK)
- */
-
- /*
- * It can be quite hard to calculate XCLK and MCLK if they don't run at the
- * same frequency. Luckily, until now all cards that need asynchrone clock
- * speeds seem to have SCLK.
- * So this driver uses SCLK to clock the chip and XCLK to clock the memory.
- */
/* ------------------------------------------------------------------------- */
-/*
- * PLL programming (Mach64 CT family)
- *
- *
- * This procedure sets the display fifo. The display fifo is a buffer that
- * contains data read from the video memory that waits to be processed by
- * the CRT controller.
- *
- * On the more modern Mach64 variants, the chip doesn't calculate the
- * interval after which the display fifo has to be reloaded from memory
- * automatically, the driver has to do it instead.
- */
-
-#define Maximum_DSP_PRECISION 7
-static u8 postdividers[] = {1,2,4,8,3};
+ /*
+ * PLL programming (Mach64 CT family)
+ */
-static int aty_dsp_gt(const struct fb_info *info, u32 bpp, struct pll_ct *pll)
+static int aty_dsp_gt(const struct fb_info *info, u8 bpp,
+ struct pll_ct *pll)
{
- u32 dsp_off, dsp_on, dsp_xclks;
- u32 multiplier, divider, ras_multiplier, ras_divider, tmp;
- u8 vshift, xshift;
- s8 dsp_precision;
-
- multiplier = ((u32)pll->mclk_fb_div) * pll->vclk_post_div_real;
- divider = ((u32)pll->vclk_fb_div) * pll->xclk_ref_div;
-
- ras_multiplier = pll->xclkmaxrasdelay;
- ras_divider = 1;
-
- if (bpp>=8)
- divider = divider * (bpp >> 2);
-
- vshift = (6 - 2) - pll->xclk_post_div; /* FIFO is 64 bits wide in accelerator mode ... */
-
- if (bpp == 0)
- vshift--; /* ... but only 32 bits in VGA mode. */
-
-#ifdef CONFIG_FB_ATY_GENERIC_LCD
- if (pll->xres != 0) {
- struct atyfb_par *par = (struct atyfb_par *) info->par;
-
- multiplier = multiplier * par->lcd_width;
- divider = divider * pll->xres & ~7;
-
- ras_multiplier = ras_multiplier * par->lcd_width;
- ras_divider = ras_divider * pll->xres & ~7;
- }
-#endif
- /* If we don't do this, 32 bits for multiplier & divider won't be
- enough in certain situations! */
- while (((multiplier | divider) & 1) == 0) {
- multiplier = multiplier >> 1;
- divider = divider >> 1;
+ struct atyfb_par *par = (struct atyfb_par *) info->par;
+ u32 dsp_xclks_per_row, dsp_loop_latency, dsp_precision, dsp_off,
+ dsp_on;
+ u32 xclks_per_row, fifo_off, fifo_on, y, fifo_size, page_size;
+
+ /* xclocks_per_row<<11 */
+ xclks_per_row =
+ (pll->mclk_fb_div * pll->vclk_post_div_real * 64 << 11) /
+ (pll->vclk_fb_div * pll->mclk_post_div_real * bpp);
+ if (xclks_per_row < (1 << 11))
+ FAIL("Dotclock to high");
+ if (M64_HAS(FIFO_24)) {
+ fifo_size = 24;
+ dsp_loop_latency = 0;
+ } else {
+ fifo_size = 32;
+ dsp_loop_latency = 2;
}
-
- /* Determine DSP precision first */
- tmp = ((multiplier * pll->fifo_size) << vshift) / divider;
-
- for (dsp_precision = -5; tmp; dsp_precision++)
- tmp >>= 1;
- if (dsp_precision < 0)
- dsp_precision = 0;
- else if (dsp_precision > Maximum_DSP_PRECISION)
- dsp_precision = Maximum_DSP_PRECISION;
-
- xshift = 6 - dsp_precision;
- vshift += xshift;
-
- /* Move on to dsp_off */
- dsp_off = ((multiplier * (pll->fifo_size - 1)) << vshift) / divider -
- (1 << (vshift - xshift));
-
-/* if (bpp == 0)
- dsp_on = ((multiplier * 20 << vshift) + divider) / divider;
- else */
- {
- dsp_on = ((multiplier << vshift) + divider) / divider;
- tmp = ((ras_multiplier << xshift) + ras_divider) / ras_divider;
- if (dsp_on < tmp)
- dsp_on = tmp;
- dsp_on = dsp_on + (tmp * 2) + (pll->xclkpagefaultdelay << xshift);
+ dsp_precision = 0;
+ y = (xclks_per_row * fifo_size) >> 11;
+ while (y) {
+ y >>= 1;
+ dsp_precision++;
}
-
- /* Calculate rounding factor and apply it to dsp_on */
- tmp = ((1 << (Maximum_DSP_PRECISION - dsp_precision)) - 1) >> 1;
- dsp_on = ((dsp_on + tmp) / (tmp + 1)) * (tmp + 1);
-
- if (dsp_on >= ((dsp_off / (tmp + 1)) * (tmp + 1))) {
- dsp_on = dsp_off - (multiplier << vshift) / divider;
- dsp_on = (dsp_on / (tmp + 1)) * (tmp + 1);
+ dsp_precision -= 5;
+ /* fifo_off<<6 */
+ fifo_off = ((xclks_per_row * (fifo_size - 1)) >> 5) + (3 << 6);
+
+ if (info->fix.smem_len > 1 * 1024 * 1024) {
+ if (par->ram_type >= SDRAM) {
+ /* >1 MB SDRAM */
+ dsp_loop_latency += 8;
+ page_size = 8;
+ } else {
+ /* >1 MB DRAM */
+ dsp_loop_latency += 6;
+ page_size = 9;
+ }
+ } else {
+ if (par->ram_type >= SDRAM) {
+ /* <2 MB SDRAM */
+ dsp_loop_latency += 9;
+ page_size = 10;
+ } else {
+ /* <2 MB DRAM */
+ dsp_loop_latency += 8;
+ page_size = 10;
+ }
}
+ /* fifo_on<<6 */
+ if (xclks_per_row >= (page_size << 11))
+ fifo_on =
+ ((2 * page_size + 1) << 6) + (xclks_per_row >> 5);
+ else
+ fifo_on = (3 * page_size + 2) << 6;
- /* Last but not least: dsp_xclks */
- dsp_xclks = ((multiplier << (vshift + 5)) + divider) / divider;
+ dsp_xclks_per_row = xclks_per_row >> dsp_precision;
+ dsp_on = fifo_on >> dsp_precision;
+ dsp_off = fifo_off >> dsp_precision;
- /* Get register values. */
- pll->dsp_on_off = (dsp_on << 16) + dsp_off;
- pll->dsp_config = (dsp_precision << 20) | (pll->dsp_loop_latency << 16) | dsp_xclks;
-#ifdef DEBUG
- printk("atyfb(%s): dsp_config 0x%08x, dsp_on_off 0x%08x\n",
- __FUNCTION__, pll->dsp_config, pll->dsp_on_off);
-#endif
+ pll->dsp_config = (dsp_xclks_per_row & 0x3fff) |
+ ((dsp_loop_latency & 0xf) << 16) | ((dsp_precision & 7) << 20);
+ pll->dsp_on_off = (dsp_on & 0x7ff) | ((dsp_off & 0x7ff) << 16);
return 0;
}
-static int aty_valid_pll_ct(const struct fb_info *info, u32 vclk_per, struct pll_ct *pll)
+static int aty_valid_pll_ct(const struct fb_info *info, u32 vclk_per,
+ struct pll_ct *pll)
{
- u32 q;
struct atyfb_par *par = (struct atyfb_par *) info->par;
-#ifdef DEBUG
- int pllvclk;
-#endif
+ u32 q, x; /* x is a workaround for sparc64-linux-gcc */
+ x = x; /* x is a workaround for sparc64-linux-gcc */
+
+ pll->pll_ref_div = par->pll_per * 2 * 255 / par->ref_clk_per;
+
+ /* FIXME: use the VTB/GTB /3 post divider if it's better suited */
+ q = par->ref_clk_per * pll->pll_ref_div * 4 / par->mclk_per; /* actually 8*q */
+ if (q < 16 * 8 || q > 255 * 8)
+ FAIL("mclk out of range");
+ else if (q < 32 * 8)
+ pll->mclk_post_div_real = 8;
+ else if (q < 64 * 8)
+ pll->mclk_post_div_real = 4;
+ else if (q < 128 * 8)
+ pll->mclk_post_div_real = 2;
+ else
+ pll->mclk_post_div_real = 1;
+ pll->mclk_fb_div = q * pll->mclk_post_div_real / 8;
/* FIXME: use the VTB/GTB /{3,6,12} post dividers if they're better suited */
- q = par->ref_clk_per * pll->pll_ref_div * 4 / vclk_per;
- if (q < 16*8 || q > 255*8) {
- printk(KERN_CRIT "atyfb: vclk out of range\n");
- return -EINVAL;
- } else {
- pll->vclk_post_div = (q < 128*8);
- pll->vclk_post_div += (q < 64*8);
- pll->vclk_post_div += (q < 32*8);
- }
- pll->vclk_post_div_real = postdividers[pll->vclk_post_div];
- // pll->vclk_post_div <<= 6;
+ q = par->ref_clk_per * pll->pll_ref_div * 4 / vclk_per; /* actually 8*q */
+ if (q < 16 * 8 || q > 255 * 8)
+ FAIL("vclk out of range");
+ else if (q < 32 * 8)
+ pll->vclk_post_div_real = 8;
+ else if (q < 64 * 8)
+ pll->vclk_post_div_real = 4;
+ else if (q < 128 * 8)
+ pll->vclk_post_div_real = 2;
+ else
+ pll->vclk_post_div_real = 1;
pll->vclk_fb_div = q * pll->vclk_post_div_real / 8;
-#ifdef DEBUG
- pllvclk = (1000000 * 2 * pll->vclk_fb_div) /
- (par->ref_clk_per * pll->pll_ref_div);
- printk("atyfb(%s): pllvclk=%d MHz, vclk=%d MHz\n",
- __FUNCTION__, pllvclk, pllvclk / pll->vclk_post_div_real);
-#endif
- pll->pll_vclk_cntl = 0x03; /* VCLK = PLL_VCLK/VCLKx_POST */
return 0;
}
-static int aty_var_to_pll_ct(const struct fb_info *info, u32 vclk_per, u32 bpp, union aty_pll *pll)
+void aty_calc_pll_ct(const struct fb_info *info, struct pll_ct *pll)
+{
+ struct atyfb_par *par = (struct atyfb_par *) info->par;
+ u8 mpostdiv = 0;
+ u8 vpostdiv = 0;
+
+ if (M64_HAS(SDRAM_MAGIC_PLL) && (par->ram_type >= SDRAM))
+ pll->pll_gen_cntl = 0x04;
+ else
+ pll->pll_gen_cntl = 0x84;
+
+ switch (pll->mclk_post_div_real) {
+ case 1:
+ mpostdiv = 0;
+ break;
+ case 2:
+ mpostdiv = 1;
+ break;
+ case 3:
+ mpostdiv = 4;
+ break;
+ case 4:
+ mpostdiv = 2;
+ break;
+ case 8:
+ mpostdiv = 3;
+ break;
+ }
+ pll->pll_gen_cntl |= mpostdiv << 4; /* mclk */
+
+ if (M64_HAS(MAGIC_POSTDIV))
+ pll->pll_ext_cntl = 0;
+ else
+ pll->pll_ext_cntl = mpostdiv; /* xclk == mclk */
+
+ switch (pll->vclk_post_div_real) {
+ case 2:
+ vpostdiv = 1;
+ break;
+ case 3:
+ pll->pll_ext_cntl |= 0x10;
+ case 1:
+ vpostdiv = 0;
+ break;
+ case 6:
+ pll->pll_ext_cntl |= 0x10;
+ case 4:
+ vpostdiv = 2;
+ break;
+ case 12:
+ pll->pll_ext_cntl |= 0x10;
+ case 8:
+ vpostdiv = 3;
+ break;
+ }
+
+ pll->pll_vclk_cntl = 0x03; /* VCLK = PLL_VCLK/VCLKx_POST */
+ pll->vclk_post_div = vpostdiv;
+}
+
+static int aty_var_to_pll_ct(const struct fb_info *info, u32 vclk_per,
+ u8 bpp, union aty_pll *pll)
{
struct atyfb_par *par = (struct atyfb_par *) info->par;
int err;
return err;
if (M64_HAS(GTB_DSP) && (err = aty_dsp_gt(info, bpp, &pll->ct)))
return err;
- /*aty_calc_pll_ct(info, &pll->ct);*/
+ aty_calc_pll_ct(info, &pll->ct);
return 0;
}
-static u32 aty_pll_to_var_ct(const struct fb_info *info, const union aty_pll *pll)
+static u32 aty_pll_ct_to_var(const struct fb_info *info,
+ const union aty_pll *pll)
{
struct atyfb_par *par = (struct atyfb_par *) info->par;
- u32 ret;
- ret = par->ref_clk_per * pll->ct.pll_ref_div * pll->ct.vclk_post_div_real / pll->ct.vclk_fb_div / 2;
-#ifdef CONFIG_FB_ATY_GENERIC_LCD
- if(pll->ct.xres > 0) {
- ret *= par->lcd_width;
- ret /= pll->ct.xres;
- }
-#endif
-#ifdef DEBUG
- printk("atyfb(%s): calculated 0x%08X(%i)\n", __FUNCTION__, ret, ret);
-#endif
- return ret;
+
+ u32 ref_clk_per = par->ref_clk_per;
+ u8 pll_ref_div = pll->ct.pll_ref_div;
+ u8 vclk_fb_div = pll->ct.vclk_fb_div;
+ u8 vclk_post_div = pll->ct.vclk_post_div_real;
+
+ return ref_clk_per * pll_ref_div * vclk_post_div / vclk_fb_div / 2;
}
-void aty_set_pll_ct(const struct fb_info *info, const union aty_pll *pll)
+void aty_set_pll_ct(const struct fb_info *info,
+ const union aty_pll *pll)
{
struct atyfb_par *par = (struct atyfb_par *) info->par;
- u32 crtc_gen_cntl, lcd_gen_cntrl;
- u8 tmp, tmp2;
-
- lcd_gen_cntrl = 0;
-#ifdef DEBUG
- printk("atyfb(%s): about to program:\n"
- "pll_ext_cntl=0x%02x pll_gen_cntl=0x%02x pll_vclk_cntl=0x%02x\n",
- __FUNCTION__,
- pll->ct.pll_ext_cntl, pll->ct.pll_gen_cntl, pll->ct.pll_vclk_cntl);
-
- printk("atyfb(%s): setting clock %lu for FeedBackDivider %i, ReferenceDivider %i, PostDivider %i(%i)\n",
- __FUNCTION__,
- par->clk_wr_offset, pll->ct.vclk_fb_div,
- pll->ct.pll_ref_div, pll->ct.vclk_post_div, pll->ct.vclk_post_div_real);
-#endif
-#ifdef CONFIG_FB_ATY_GENERIC_LCD
- if (par->lcd_table != 0) {
- /* turn off LCD */
- lcd_gen_cntrl = aty_ld_lcd(LCD_GEN_CNTL, par);
- aty_st_lcd(LCD_GEN_CNTL, lcd_gen_cntrl & ~LCD_ON, par);
- }
-#endif
- aty_st_8(CLOCK_CNTL, par->clk_wr_offset | CLOCK_STROBE, par);
-
- /* Temporarily switch to accelerator mode */
- crtc_gen_cntl = aty_ld_le32(CRTC_GEN_CNTL, par);
- if (!(crtc_gen_cntl & CRTC_EXT_DISP_EN))
- aty_st_le32(CRTC_GEN_CNTL, crtc_gen_cntl | CRTC_EXT_DISP_EN, par);
-
- /* Reset VCLK generator */
- aty_st_pll_ct(PLL_VCLK_CNTL, pll->ct.pll_vclk_cntl, par);
-
- /* Set post-divider */
- tmp2 = par->clk_wr_offset << 1;
- tmp = aty_ld_pll_ct(VCLK_POST_DIV, par);
- tmp &= ~(0x03U << tmp2);
- tmp |= ((pll->ct.vclk_post_div & 0x03U) << tmp2);
- aty_st_pll_ct(VCLK_POST_DIV, tmp, par);
-
- /* Set extended post-divider */
- tmp = aty_ld_pll_ct(PLL_EXT_CNTL, par);
- tmp &= ~(0x10U << par->clk_wr_offset);
- tmp &= 0xF0U;
- tmp |= pll->ct.pll_ext_cntl;
- aty_st_pll_ct(PLL_EXT_CNTL, tmp, par);
- /* Set feedback divider */
- tmp = VCLK0_FB_DIV + par->clk_wr_offset;
- aty_st_pll_ct(tmp, (pll->ct.vclk_fb_div & 0xFFU), par);
-
- aty_st_pll_ct(PLL_GEN_CNTL, (pll->ct.pll_gen_cntl & (~(PLL_OVERRIDE | PLL_MCLK_RST))) | OSC_EN, par);
-
- /* End VCLK generator reset */
- aty_st_pll_ct(PLL_VCLK_CNTL, pll->ct.pll_vclk_cntl & ~(PLL_VCLK_RST), par);
- mdelay(5);
-
- aty_st_pll_ct(PLL_GEN_CNTL, pll->ct.pll_gen_cntl, par);
- aty_st_pll_ct(PLL_VCLK_CNTL, pll->ct.pll_vclk_cntl, par);
- mdelay(1);
-
- /* Restore mode register */
- if (!(crtc_gen_cntl & CRTC_EXT_DISP_EN))
- aty_st_le32(CRTC_GEN_CNTL, crtc_gen_cntl, par);
+ aty_st_pll(PLL_REF_DIV, pll->ct.pll_ref_div, par);
+ aty_st_pll(PLL_GEN_CNTL, pll->ct.pll_gen_cntl, par);
+ aty_st_pll(MCLK_FB_DIV, pll->ct.mclk_fb_div, par);
+ aty_st_pll(PLL_VCLK_CNTL, pll->ct.pll_vclk_cntl, par);
+ aty_st_pll(VCLK_POST_DIV, pll->ct.vclk_post_div, par);
+ aty_st_pll(VCLK0_FB_DIV, pll->ct.vclk_fb_div, par);
+ aty_st_pll(PLL_EXT_CNTL, pll->ct.pll_ext_cntl, par);
if (M64_HAS(GTB_DSP)) {
- u8 dll_cntl;
-
if (M64_HAS(XL_DLL))
- dll_cntl = 0x80;
+ aty_st_pll(DLL_CNTL, 0x80, par);
else if (par->ram_type >= SDRAM)
- dll_cntl = 0xa6;
+ aty_st_pll(DLL_CNTL, 0xa6, par);
else
- dll_cntl = 0xa0;
- aty_st_pll_ct(DLL_CNTL, dll_cntl, par);
- aty_st_pll_ct(VFC_CNTL, 0x1b, par);
+ aty_st_pll(DLL_CNTL, 0xa0, par);
+ aty_st_pll(VFC_CNTL, 0x1b, par);
aty_st_le32(DSP_CONFIG, pll->ct.dsp_config, par);
aty_st_le32(DSP_ON_OFF, pll->ct.dsp_on_off, par);
-
- mdelay(10);
- aty_st_pll_ct(DLL_CNTL, dll_cntl, par);
- mdelay(10);
- aty_st_pll_ct(DLL_CNTL, dll_cntl | 0x40, par);
- mdelay(10);
- aty_st_pll_ct(DLL_CNTL, dll_cntl & ~0x40, par);
- }
-#ifdef CONFIG_FB_ATY_GENERIC_LCD
- if (par->lcd_table != 0) {
- /* restore LCD */
- aty_st_lcd(LCD_GEN_CNTL, lcd_gen_cntrl, par);
- }
-#endif
-}
-
-void __init aty_get_pll_ct(const struct fb_info *info, union aty_pll *pll)
-{
- struct atyfb_par *par = (struct atyfb_par *) info->par;
- u8 tmp, clock;
-
- clock = aty_ld_8(CLOCK_CNTL, par) & 0x03U;
- tmp = clock << 1;
- pll->ct.vclk_post_div = (aty_ld_pll_ct(VCLK_POST_DIV, par) >> tmp) & 0x03U;
-
- pll->ct.pll_ext_cntl = aty_ld_pll_ct(PLL_EXT_CNTL, par) & 0x0FU;
- pll->ct.vclk_fb_div = aty_ld_pll_ct(VCLK0_FB_DIV + clock, par) & 0xFFU;
- pll->ct.pll_ref_div = aty_ld_pll_ct(PLL_REF_DIV, par);
- pll->ct.mclk_fb_div = aty_ld_pll_ct(MCLK_FB_DIV, par);
-
- pll->ct.pll_gen_cntl = aty_ld_pll_ct(PLL_GEN_CNTL, par);
- pll->ct.pll_vclk_cntl = aty_ld_pll_ct(PLL_VCLK_CNTL, par);
-
- if (M64_HAS(GTB_DSP)) {
- pll->ct.dsp_config = aty_ld_le32(DSP_CONFIG, par);
- pll->ct.dsp_on_off = aty_ld_le32(DSP_ON_OFF, par);
- }
-}
-
-int __init aty_init_pll_ct(const struct fb_info *info, union aty_pll *pll) {
- struct atyfb_par *par = (struct atyfb_par *) info->par;
- u8 mpost_div, xpost_div, sclk_post_div_real, sclk_fb_div, spll_cntl2;
- u32 q, i, memcntl, trp;
- u32 dsp_config, dsp_on_off, vga_dsp_config, vga_dsp_on_off;
-#ifdef DEBUG
- int pllmclk, pllsclk;
-#endif
- pll->ct.pll_ext_cntl = aty_ld_pll_ct(PLL_EXT_CNTL, par);
- pll->ct.xclk_post_div = pll->ct.pll_ext_cntl & 0x07;
- pll->ct.xclk_ref_div = 1;
- switch (pll->ct.xclk_post_div) {
- case 0: case 1: case 2: case 3:
- break;
-
- case 4:
- pll->ct.xclk_ref_div = 3;
- pll->ct.xclk_post_div = 0;
- break;
-
- default:
- printk(KERN_CRIT "atyfb: Unsupported xclk source: %d.\n", pll->ct.xclk_post_div);
- return -EINVAL;
- }
- pll->ct.mclk_fb_mult = 2;
- if(pll->ct.pll_ext_cntl & PLL_MFB_TIMES_4_2B) {
- pll->ct.mclk_fb_mult = 4;
- pll->ct.xclk_post_div -= 1;
- }
-
-#ifdef DEBUG
- printk("atyfb(%s): mclk_fb_mult=%d, xclk_post_div=%d\n",
- __FUNCTION__, pll->ct.mclk_fb_mult, pll->ct.xclk_post_div);
-#endif
-
- memcntl = aty_ld_le32(MEM_CNTL, par);
- trp = (memcntl & 0x300) >> 8;
-
- pll->ct.xclkpagefaultdelay = ((memcntl & 0xc00) >> 10) + ((memcntl & 0x1000) >> 12) + trp + 2;
- pll->ct.xclkmaxrasdelay = ((memcntl & 0x70000) >> 16) + trp + 2;
-
- if (M64_HAS(FIFO_32)) {
- pll->ct.fifo_size = 32;
- } else {
- pll->ct.fifo_size = 24;
- pll->ct.xclkpagefaultdelay += 2;
- pll->ct.xclkmaxrasdelay += 3;
- }
-
- switch (par->ram_type) {
- case DRAM:
- if (info->fix.smem_len<=ONE_MB) {
- pll->ct.dsp_loop_latency = 10;
- } else {
- pll->ct.dsp_loop_latency = 8;
- pll->ct.xclkpagefaultdelay += 2;
- }
- break;
- case EDO:
- case PSEUDO_EDO:
- if (info->fix.smem_len<=ONE_MB) {
- pll->ct.dsp_loop_latency = 9;
- } else {
- pll->ct.dsp_loop_latency = 8;
- pll->ct.xclkpagefaultdelay += 1;
- }
- break;
- case SDRAM:
- if (info->fix.smem_len<=ONE_MB) {
- pll->ct.dsp_loop_latency = 11;
- } else {
- pll->ct.dsp_loop_latency = 10;
- pll->ct.xclkpagefaultdelay += 1;
- }
- break;
- case SGRAM:
- pll->ct.dsp_loop_latency = 8;
- pll->ct.xclkpagefaultdelay += 3;
- break;
- default:
- pll->ct.dsp_loop_latency = 11;
- pll->ct.xclkpagefaultdelay += 3;
- break;
- }
-
- if (pll->ct.xclkmaxrasdelay <= pll->ct.xclkpagefaultdelay)
- pll->ct.xclkmaxrasdelay = pll->ct.xclkpagefaultdelay + 1;
-
- /* Allow BIOS to override */
- dsp_config = aty_ld_le32(DSP_CONFIG, par);
- dsp_on_off = aty_ld_le32(DSP_ON_OFF, par);
- vga_dsp_config = aty_ld_le32(VGA_DSP_CONFIG, par);
- vga_dsp_on_off = aty_ld_le32(VGA_DSP_ON_OFF, par);
-
- if (dsp_config)
- pll->ct.dsp_loop_latency = (dsp_config & DSP_LOOP_LATENCY) >> 16;
-#if 0
- FIXME: is it relevant for us?
- if ((!dsp_on_off && !M64_HAS(RESET_3D)) ||
- ((dsp_on_off == vga_dsp_on_off) &&
- (!dsp_config || !((dsp_config ^ vga_dsp_config) & DSP_XCLKS_PER_QW)))) {
- vga_dsp_on_off &= VGA_DSP_OFF;
- vga_dsp_config &= VGA_DSP_XCLKS_PER_QW;
- if (ATIDivide(vga_dsp_on_off, vga_dsp_config, 5, 1) > 24)
- pll->ct.fifo_size = 32;
- else
- pll->ct.fifo_size = 24;
- }
-#endif
- /* Exit if the user does not want us to tamper with the clock
- rates of her chip. */
- if (par->mclk_per == 0) {
- u8 mclk_fb_div, pll_ext_cntl;
- pll->ct.pll_ref_div = aty_ld_pll_ct(PLL_REF_DIV, par);
- pll_ext_cntl = aty_ld_pll_ct(PLL_EXT_CNTL, par);
- pll->ct.xclk_post_div_real = postdividers[pll_ext_cntl & 0x07];
- mclk_fb_div = aty_ld_pll_ct(MCLK_FB_DIV, par);
- if (pll_ext_cntl & PLL_MFB_TIMES_4_2B)
- mclk_fb_div <<= 1;
- pll->ct.mclk_fb_div = mclk_fb_div;
- return 0;
- }
-
- pll->ct.pll_ref_div = par->pll_per * 2 * 255 / par->ref_clk_per;
-
- /* FIXME: use the VTB/GTB /3 post divider if it's better suited */
- q = par->ref_clk_per * pll->ct.pll_ref_div * 8 /
- (pll->ct.mclk_fb_mult * par->xclk_per);
-
- if (q < 16*8 || q > 255*8) {
- printk(KERN_CRIT "atxfb: xclk out of range\n");
- return -EINVAL;
- } else {
- xpost_div = (q < 128*8);
- xpost_div += (q < 64*8);
- xpost_div += (q < 32*8);
- }
- pll->ct.xclk_post_div_real = postdividers[xpost_div];
- pll->ct.mclk_fb_div = q * pll->ct.xclk_post_div_real / 8;
-
-#ifdef DEBUG
- pllmclk = (1000000 * pll->ct.mclk_fb_mult * pll->ct.mclk_fb_div) /
- (par->ref_clk_per * pll->ct.pll_ref_div);
- printk("atyfb(%s): pllmclk=%d MHz, xclk=%d MHz\n",
- __FUNCTION__, pllmclk, pllmclk / pll->ct.xclk_post_div_real);
-#endif
-
- if (M64_HAS(SDRAM_MAGIC_PLL) && (par->ram_type >= SDRAM))
- pll->ct.pll_gen_cntl = OSC_EN;
- else
- pll->ct.pll_gen_cntl = OSC_EN | DLL_PWDN /* | FORCE_DCLK_TRI_STATE */;
-
- if (M64_HAS(MAGIC_POSTDIV))
- pll->ct.pll_ext_cntl = 0;
- else
- pll->ct.pll_ext_cntl = xpost_div;
-
- if (pll->ct.mclk_fb_mult == 4)
- pll->ct.pll_ext_cntl |= PLL_MFB_TIMES_4_2B;
-
- if (par->mclk_per == par->xclk_per) {
- pll->ct.pll_gen_cntl |= (xpost_div << 4); /* mclk == xclk */
- } else {
- /*
- * The chip clock is not equal to the memory clock.
- * Therefore we will use sclk to clock the chip.
- */
- pll->ct.pll_gen_cntl |= (6 << 4); /* mclk == sclk */
-
- q = par->ref_clk_per * pll->ct.pll_ref_div * 4 / par->mclk_per;
- if (q < 16*8 || q > 255*8) {
- printk(KERN_CRIT "atyfb: mclk out of range\n");
- return -EINVAL;
- } else {
- mpost_div = (q < 128*8);
- mpost_div += (q < 64*8);
- mpost_div += (q < 32*8);
- }
- sclk_post_div_real = postdividers[mpost_div];
- sclk_fb_div = q * sclk_post_div_real / 8;
- spll_cntl2 = mpost_div << 4;
-#ifdef DEBUG
- pllsclk = (1000000 * 2 * sclk_fb_div) /
- (par->ref_clk_per * pll->ct.pll_ref_div);
- printk("atyfb(%s): use sclk, pllsclk=%d MHz, sclk=mclk=%d MHz\n",
- __FUNCTION__, pllsclk, pllsclk / sclk_post_div_real);
-#endif
- /*
- * This disables the sclk, crashes the computer as reported:
- * aty_st_pll_ct(SPLL_CNTL2, 3, info);
- *
- * So it seems the sclk must be enabled before it is used;
- * so PLL_GEN_CNTL must be programmed *after* the sclk.
- */
- aty_st_pll_ct(SCLK_FB_DIV, sclk_fb_div, par);
- aty_st_pll_ct(SPLL_CNTL2, spll_cntl2, par);
- /*
- * The sclk has been started. However, I believe the first clock
- * ticks it generates are not very stable. Hope this primitive loop
- * helps for Rage Mobilities that sometimes crash when
- * we switch to sclk. (Daniel Mantione, 13-05-2003)
- */
- for (i=0;i<=0x1ffff;i++);
}
-
- aty_st_pll_ct(PLL_REF_DIV, pll->ct.pll_ref_div, par);
- aty_st_pll_ct(PLL_GEN_CNTL, pll->ct.pll_gen_cntl, par);
- aty_st_pll_ct(MCLK_FB_DIV, pll->ct.mclk_fb_div, par);
- aty_st_pll_ct(PLL_EXT_CNTL, pll->ct.pll_ext_cntl, par);
- /* Disable the extra precision pixel clock controls since we do not use them. */
- aty_st_pll_ct(EXT_VPLL_CNTL, aty_ld_pll_ct(EXT_VPLL_CNTL, par) &
- ~(EXT_VPLL_EN | EXT_VPLL_VGA_EN | EXT_VPLL_INSYNC), par);
-
- return 0;
}
static int dummy(void)
const struct aty_pll_ops aty_pll_ct = {
.var_to_pll = aty_var_to_pll_ct,
- .pll_to_var = aty_pll_to_var_ct,
+ .pll_to_var = aty_pll_ct_to_var,
.set_pll = aty_set_pll_ct,
- .get_pll = aty_get_pll_ct,
- .init_pll = aty_init_pll_ct
};