#include <asm/pmac_feature.h>
#endif
-/* For detecting supported PC laptops */
-#ifdef CONFIG_X86
-#include <linux/dmi.h>
-#endif
-
#include "ati_ids.h"
-#ifdef CONFIG_X86
-/* This array holds a list of supported PC laptops.
- * Currently only few IBM models are tested.
- * If you want to experiment, use dmidecode to find out
- * vendor and product codes for Your laptop.
+static void radeon_reinitialize_M10(struct radeonfb_info *rinfo);
+
+/*
+ * Workarounds for bugs in PC laptops:
+ * - enable D2 sleep in some IBM Thinkpads
+ * - special case for Samsung P35
+ *
+ * Whitelist by subsystem vendor/device because
+ * its the subsystem vendor's fault!
*/
-static struct dmi_system_id __devinitdata radeonfb_dmi_table[] = {
-#include "radeon_pm_whitelist.h"
+
+#if defined(CONFIG_PM) && defined(CONFIG_X86)
+struct radeon_device_id {
+ const char *ident; /* (arbitrary) Name */
+ const unsigned short subsystem_vendor; /* Subsystem Vendor ID */
+ const unsigned short subsystem_device; /* Subsystem Device ID */
+ const enum radeon_pm_mode pm_mode_modifier; /* modify pm_mode */
+ const reinit_function_ptr new_reinit_func; /* changed reinit_func */
};
-extern int radeon_force_sleep;
-#endif
+#define BUGFIX(model, sv, sd, pm, fn) { \
+ .ident = model, \
+ .subsystem_vendor = sv, \
+ .subsystem_device = sd, \
+ .pm_mode_modifier = pm, \
+ .new_reinit_func = fn \
+}
+
+static struct radeon_device_id radeon_workaround_list[] = {
+ BUGFIX("IBM Thinkpad R32",
+ PCI_VENDOR_ID_IBM, 0x1905,
+ radeon_pm_d2, NULL),
+ BUGFIX("IBM Thinkpad R40",
+ PCI_VENDOR_ID_IBM, 0x0526,
+ radeon_pm_d2, NULL),
+ BUGFIX("IBM Thinkpad R40",
+ PCI_VENDOR_ID_IBM, 0x0527,
+ radeon_pm_d2, NULL),
+ BUGFIX("IBM Thinkpad R50/R51/T40/T41",
+ PCI_VENDOR_ID_IBM, 0x0531,
+ radeon_pm_d2, NULL),
+ BUGFIX("IBM Thinkpad R51/T40/T41/T42",
+ PCI_VENDOR_ID_IBM, 0x0530,
+ radeon_pm_d2, NULL),
+ BUGFIX("IBM Thinkpad T30",
+ PCI_VENDOR_ID_IBM, 0x0517,
+ radeon_pm_d2, NULL),
+ BUGFIX("IBM Thinkpad T40p",
+ PCI_VENDOR_ID_IBM, 0x054d,
+ radeon_pm_d2, NULL),
+ BUGFIX("IBM Thinkpad T42",
+ PCI_VENDOR_ID_IBM, 0x0550,
+ radeon_pm_d2, NULL),
+ BUGFIX("IBM Thinkpad X31/X32",
+ PCI_VENDOR_ID_IBM, 0x052f,
+ radeon_pm_d2, NULL),
+ BUGFIX("Samsung P35",
+ PCI_VENDOR_ID_SAMSUNG, 0xc00c,
+ radeon_pm_off, radeon_reinitialize_M10),
+ BUGFIX("Acer Aspire 2010",
+ PCI_VENDOR_ID_AI, 0x0061,
+ radeon_pm_off, radeon_reinitialize_M10),
+ { .ident = NULL }
+};
+
+static int radeon_apply_workarounds(struct radeonfb_info *rinfo)
+{
+ struct radeon_device_id *id;
+
+ for (id = radeon_workaround_list; id->ident != NULL; id++ )
+ if ((id->subsystem_vendor == rinfo->pdev->subsystem_vendor ) &&
+ (id->subsystem_device == rinfo->pdev->subsystem_device )) {
+
+ /* we found a device that requires workaround */
+ printk(KERN_DEBUG "radeonfb: %s detected"
+ ", enabling workaround\n", id->ident);
+
+ rinfo->pm_mode |= id->pm_mode_modifier;
+
+ if (id->new_reinit_func != NULL)
+ rinfo->reinit_func = id->new_reinit_func;
+
+ return 1;
+ }
+ return 0; /* not found */
+}
+
+#else /* defined(CONFIG_PM) && defined(CONFIG_X86) */
+static inline int radeon_apply_workarounds(struct radeonfb_info *rinfo)
+{
+ return 0;
+}
+#endif /* defined(CONFIG_PM) && defined(CONFIG_X86) */
+
+
static void radeon_pm_disable_dynamic_mode(struct radeonfb_info *rinfo)
{
* now (until we get more info on how to compute the correct
* value for various X86 bridges).
*/
-
#ifdef CONFIG_PPC_PMAC
- /* AGP PLL control */
- if (rinfo->family <= CHIP_FAMILY_RV280) {
- OUTREG(BUS_CNTL1, INREG(BUS_CNTL1) | BUS_CNTL1__AGPCLK_VALID);
-
- OUTREG(BUS_CNTL1,
- (INREG(BUS_CNTL1) & ~BUS_CNTL1__MOBILE_PLATFORM_SEL_MASK)
- | (2<<BUS_CNTL1__MOBILE_PLATFORM_SEL__SHIFT)); // 440BX
- } else {
- OUTREG(BUS_CNTL1, INREG(BUS_CNTL1));
- OUTREG(BUS_CNTL1, (INREG(BUS_CNTL1) & ~0x4000) | 0x8000);
+ if (machine_is(powermac)) {
+ /* AGP PLL control */
+ if (rinfo->family <= CHIP_FAMILY_RV280) {
+ OUTREG(BUS_CNTL1, INREG(BUS_CNTL1) | BUS_CNTL1__AGPCLK_VALID);
+ OUTREG(BUS_CNTL1,
+ (INREG(BUS_CNTL1) & ~BUS_CNTL1__MOBILE_PLATFORM_SEL_MASK)
+ | (2<<BUS_CNTL1__MOBILE_PLATFORM_SEL__SHIFT)); // 440BX
+ } else {
+ OUTREG(BUS_CNTL1, INREG(BUS_CNTL1));
+ OUTREG(BUS_CNTL1, (INREG(BUS_CNTL1) & ~0x4000) | 0x8000);
+ }
}
#endif
0x21320032, 0xa1320032, 0x21320032, 0xffffffff,
0x31320032 };
- u32 *mrtable = default_mrtable;
+ const u32 *mrtable = default_mrtable;
int i, mrtable_size = ARRAY_SIZE(default_mrtable);
mdelay(30);
if (rinfo->of_node != NULL) {
int size;
- mrtable = (u32 *)get_property(rinfo->of_node, "ATY,MRT", &size);
+ mrtable = get_property(rinfo->of_node, "ATY,MRT", &size);
if (mrtable)
mrtable_size = size >> 2;
else
}
-int radeonfb_pci_suspend(struct pci_dev *pdev, pm_message_t state)
+int radeonfb_pci_suspend(struct pci_dev *pdev, pm_message_t mesg)
{
struct fb_info *info = pci_get_drvdata(pdev);
struct radeonfb_info *rinfo = info->par;
int i;
- if (state.event == pdev->dev.power.power_state.event)
+ if (mesg.event == pdev->dev.power.power_state.event)
return 0;
- printk(KERN_DEBUG "radeonfb (%s): suspending to state: %d...\n",
- pci_name(pdev), state.event);
+ printk(KERN_DEBUG "radeonfb (%s): suspending for event: %d...\n",
+ pci_name(pdev), mesg.event);
/* For suspend-to-disk, we cheat here. We don't suspend anything and
* let fbcon continue drawing until we are all set. That shouldn't
* really cause any problem at this point, provided that the wakeup
* code knows that any state in memory may not match the HW
*/
- if (state.event == PM_EVENT_FREEZE)
+ switch (mesg.event) {
+ case PM_EVENT_FREEZE: /* about to take snapshot */
+ case PM_EVENT_PRETHAW: /* before restoring snapshot */
goto done;
+ }
acquire_console_sem();
release_console_sem();
done:
- pdev->dev.power.power_state = state;
+ pdev->dev.power.power_state = mesg;
return 0;
}
#endif /* CONFIG_PM */
-void radeonfb_pm_init(struct radeonfb_info *rinfo, int dynclk)
+void radeonfb_pm_init(struct radeonfb_info *rinfo, int dynclk, int ignore_devlist, int force_sleep)
{
/* Find PM registers in config space if any*/
rinfo->pm_reg = pci_find_capability(rinfo->pdev, PCI_CAP_ID_PM);
}
#if defined(CONFIG_PM)
+#if defined(CONFIG_PPC_PMAC)
/* Check if we can power manage on suspend/resume. We can do
* D2 on M6, M7 and M9, and we can resume from D3 cold a few other
* "Mac" cards, but that's all. We need more infos about what the
* BIOS does tho. Right now, all this PM stuff is pmac-only for that
* reason. --BenH
*/
- /* Special case for Samsung P35 laptops
- */
- if ((rinfo->pdev->vendor == PCI_VENDOR_ID_ATI) &&
- (rinfo->pdev->device == PCI_CHIP_RV350_NP) &&
- (rinfo->pdev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG) &&
- (rinfo->pdev->subsystem_device == 0xc00c)) {
- rinfo->reinit_func = radeon_reinitialize_M10;
- rinfo->pm_mode |= radeon_pm_off;
- }
-#if defined(CONFIG_PPC_PMAC)
if (machine_is(powermac) && rinfo->of_node) {
if (rinfo->is_mobility && rinfo->pm_reg &&
rinfo->family <= CHIP_FAMILY_RV250)
#endif /* defined(CONFIG_PPC_PMAC) */
#endif /* defined(CONFIG_PM) */
-/* The PM code also works on some PC laptops.
- * Only a few models are actually tested so Your mileage may vary.
- * We can do D2 on at least M7 and M9 on some IBM ThinkPad T41 models.
- */
-#if defined(CONFIG_PM) && defined(CONFIG_X86)
- if (radeon_force_sleep || dmi_check_system(radeonfb_dmi_table)) {
- if (radeon_force_sleep)
- printk("radeonfb: forcefully enabling sleep mode\n");
- else
- printk("radeonfb: enabling sleep mode\n");
-
- if (rinfo->is_mobility && rinfo->pm_reg &&
- rinfo->family <= CHIP_FAMILY_RV250)
- rinfo->pm_mode |= radeon_pm_d2;
+ if (ignore_devlist)
+ printk(KERN_DEBUG
+ "radeonfb: skipping test for device workarounds\n");
+ else
+ radeon_apply_workarounds(rinfo);
- /* Power down TV DAC, that saves a significant amount of power,
- * we'll have something better once we actually have some TVOut
- * support
- */
- OUTREG(TV_DAC_CNTL, INREG(TV_DAC_CNTL) | 0x07000000);
+ if (force_sleep) {
+ printk(KERN_DEBUG
+ "radeonfb: forcefully enabling D2 sleep mode\n");
+ rinfo->pm_mode |= radeon_pm_d2;
}
-#endif /* defined(CONFIG_PM) && defined(CONFIG_X86) */
}
void radeonfb_pm_exit(struct radeonfb_info *rinfo)
git://git.onelab.eu / linux-2.6.git / blobdiff