This commit was manufactured by cvs2svn to create branch 'vserver'.

[linux-2.6.git] / drivers / video / geode / display_gx.c

diff --git a/drivers/video/geode/display_gx.c b/drivers/video/geode/display_gx.c
new file mode 100644 (file)
index 0000000..825c340
--- /dev/null
+++ b/drivers/video/geode/display_gx.c
@@ -0,0 +1,156 @@
+/*
+ * Geode GX display controller.
+ *
+ *   Copyright (C) 2005 Arcom Control Systems Ltd.
+ *
+ *   Portions from AMD's original 2.4 driver:
+ *     Copyright (C) 2004 Advanced Micro Devices, Inc.
+ *
+ *   This program is free software; you can redistribute it and/or modify it
+ *   under the terms of the GNU General Public License as published by * the
+ *   Free Software Foundation; either version 2 of the License, or * (at your
+ *   option) any later version.
+ */
+#include <linux/spinlock.h>
+#include <linux/fb.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+#include <asm/div64.h>
+#include <asm/delay.h>
+
+#include "geodefb.h"
+#include "display_gx.h"
+
+int gx_frame_buffer_size(void)
+{
+       /* Assuming 16 MiB. */
+       return 16*1024*1024;
+}
+
+int gx_line_delta(int xres, int bpp)
+{
+       /* Must be a multiple of 8 bytes. */
+       return (xres * (bpp >> 3) + 7) & ~0x7;
+}
+
+static void gx_set_mode(struct fb_info *info)
+{
+       struct geodefb_par *par = info->par;
+       u32 gcfg, dcfg;
+       int hactive, hblankstart, hsyncstart, hsyncend, hblankend, htotal;
+       int vactive, vblankstart, vsyncstart, vsyncend, vblankend, vtotal;
+
+       /* Unlock the display controller registers. */
+       readl(par->dc_regs + DC_UNLOCK);
+       writel(DC_UNLOCK_CODE, par->dc_regs + DC_UNLOCK);
+
+       gcfg = readl(par->dc_regs + DC_GENERAL_CFG);
+       dcfg = readl(par->dc_regs + DC_DISPLAY_CFG);
+
+       /* Disable the timing generator. */
+       dcfg &= ~(DC_DCFG_TGEN);
+       writel(dcfg, par->dc_regs + DC_DISPLAY_CFG);
+
+       /* Wait for pending memory requests before disabling the FIFO load. */
+       udelay(100);
+
+       /* Disable FIFO load and compression. */
+       gcfg &= ~(DC_GCFG_DFLE | DC_GCFG_CMPE | DC_GCFG_DECE);
+       writel(gcfg, par->dc_regs + DC_GENERAL_CFG);
+
+       /* Setup DCLK and its divisor. */
+       par->vid_ops->set_dclk(info);
+
+       /*
+        * Setup new mode.
+        */
+
+       /* Clear all unused feature bits. */
+       gcfg &= DC_GCFG_YUVM | DC_GCFG_VDSE;
+       dcfg = 0;
+
+       /* Set FIFO priority (default 6/5) and enable. */
+       /* FIXME: increase fifo priority for 1280x1024 and higher modes? */
+       gcfg |= (6 << DC_GCFG_DFHPEL_POS) | (5 << DC_GCFG_DFHPSL_POS) | DC_GCFG_DFLE;
+
+       /* Framebuffer start offset. */
+       writel(0, par->dc_regs + DC_FB_ST_OFFSET);
+
+       /* Line delta and line buffer length. */
+       writel(info->fix.line_length >> 3, par->dc_regs + DC_GFX_PITCH);
+       writel(((info->var.xres * info->var.bits_per_pixel/8) >> 3) + 2,
+              par->dc_regs + DC_LINE_SIZE);
+
+       /* Enable graphics and video data and unmask address lines. */
+       dcfg |= DC_DCFG_GDEN | DC_DCFG_VDEN | DC_DCFG_A20M | DC_DCFG_A18M;
+
+       /* Set pixel format. */
+       switch (info->var.bits_per_pixel) {
+       case 8:
+               dcfg |= DC_DCFG_DISP_MODE_8BPP;
+               break;
+       case 16:
+               dcfg |= DC_DCFG_DISP_MODE_16BPP;
+               dcfg |= DC_DCFG_16BPP_MODE_565;
+               break;
+       case 32:
+               dcfg |= DC_DCFG_DISP_MODE_24BPP;
+               dcfg |= DC_DCFG_PALB;
+               break;
+       }
+
+       /* Enable timing generator. */
+       dcfg |= DC_DCFG_TGEN;
+
+       /* Horizontal and vertical timings. */
+       hactive = info->var.xres;
+       hblankstart = hactive;
+       hsyncstart = hblankstart + info->var.right_margin;
+       hsyncend =  hsyncstart + info->var.hsync_len;
+       hblankend = hsyncend + info->var.left_margin;
+       htotal = hblankend;
+
+       vactive = info->var.yres;
+       vblankstart = vactive;
+       vsyncstart = vblankstart + info->var.lower_margin;
+       vsyncend =  vsyncstart + info->var.vsync_len;
+       vblankend = vsyncend + info->var.upper_margin;
+       vtotal = vblankend;
+
+       writel((hactive - 1)     | ((htotal - 1) << 16),    par->dc_regs + DC_H_ACTIVE_TIMING);
+       writel((hblankstart - 1) | ((hblankend - 1) << 16), par->dc_regs + DC_H_BLANK_TIMING);
+       writel((hsyncstart - 1)  | ((hsyncend - 1) << 16),  par->dc_regs + DC_H_SYNC_TIMING);
+
+       writel((vactive - 1)     | ((vtotal - 1) << 16),    par->dc_regs + DC_V_ACTIVE_TIMING);
+       writel((vblankstart - 1) | ((vblankend - 1) << 16), par->dc_regs + DC_V_BLANK_TIMING);
+       writel((vsyncstart - 1)  | ((vsyncend - 1) << 16),  par->dc_regs + DC_V_SYNC_TIMING);
+
+       /* Write final register values. */
+       writel(dcfg, par->dc_regs + DC_DISPLAY_CFG);
+       writel(gcfg, par->dc_regs + DC_GENERAL_CFG);
+
+       par->vid_ops->configure_display(info);
+
+       /* Relock display controller registers */
+       writel(0, par->dc_regs + DC_UNLOCK);
+}
+
+static void gx_set_hw_palette_reg(struct fb_info *info, unsigned regno,
+                                  unsigned red, unsigned green, unsigned blue)
+{
+       struct geodefb_par *par = info->par;
+       int val;
+
+       /* Hardware palette is in RGB 8-8-8 format. */
+       val  = (red   << 8) & 0xff0000;
+       val |= (green)      & 0x00ff00;
+       val |= (blue  >> 8) & 0x0000ff;
+
+       writel(regno, par->dc_regs + DC_PAL_ADDRESS);
+       writel(val, par->dc_regs + DC_PAL_DATA);
+}
+
+struct geode_dc_ops gx_dc_ops = {
+       .set_mode        = gx_set_mode,
+       .set_palette_reg = gx_set_hw_palette_reg,
+};