*
*/
-#include <linux/config.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/tty.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/fb.h>
switch (depth) {
case 8:
- size = sizeof(bios8) / sizeof(biosMode);
+ size = ARRAY_SIZE(bios8);
mode = bios8;
break;
case 16:
- size = sizeof(bios16) / sizeof(biosMode);
+ size = ARRAY_SIZE(bios16);
mode = bios16;
break;
case 24:
- size = sizeof(bios24) / sizeof(biosMode);
+ size = ARRAY_SIZE(bios24);
mode = bios24;
break;
#ifdef NO_32BIT_SUPPORT_YET
case 32:
- size = sizeof(bios32) / sizeof(biosMode);
+ size = ARRAY_SIZE(bios32);
mode = bios32;
break;
#endif
*/
static inline int neo2200_sync(struct fb_info *info)
{
- struct neofb_par *par = (struct neofb_par *) info->par;
- int waitcycles;
+ struct neofb_par *par = info->par;
- while (readl(&par->neo2200->bltStat) & 1)
- waitcycles++;
+ while (readl(&par->neo2200->bltStat) & 1);
return 0;
}
static inline void neo2200_accel_init(struct fb_info *info,
struct fb_var_screeninfo *var)
{
- struct neofb_par *par = (struct neofb_par *) info->par;
+ struct neofb_par *par = info->par;
Neo2200 __iomem *neo2200 = par->neo2200;
u32 bltMod, pitch;
static int
neofb_open(struct fb_info *info, int user)
{
- struct neofb_par *par = (struct neofb_par *) info->par;
+ struct neofb_par *par = info->par;
int cnt = atomic_read(&par->ref_count);
if (!cnt) {
static int
neofb_release(struct fb_info *info, int user)
{
- struct neofb_par *par = (struct neofb_par *) info->par;
+ struct neofb_par *par = info->par;
int cnt = atomic_read(&par->ref_count);
if (!cnt)
static int
neofb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
{
- struct neofb_par *par = (struct neofb_par *) info->par;
+ struct neofb_par *par = info->par;
unsigned int pixclock = var->pixclock;
struct xtimings timings;
int memlen, vramlen;
static int neofb_set_par(struct fb_info *info)
{
- struct neofb_par *par = (struct neofb_par *) info->par;
+ struct neofb_par *par = info->par;
struct xtimings timings;
unsigned char temp;
int i, clock_hi = 0;
par->SysIfaceCntl2 = 0xc0; /* VESA Bios sets this to 0x80! */
+ /* Initialize: by default, we want display config register to be read */
+ par->PanelDispCntlRegRead = 1;
+
/* Enable any user specified display devices. */
par->PanelDispCntlReg1 = 0x00;
if (par->internal_display)
/* If the user did not specify any display devices, then... */
if (par->PanelDispCntlReg1 == 0x00) {
/* Default to internal (i.e., LCD) only. */
- par->PanelDispCntlReg1 |= 0x02;
+ par->PanelDispCntlReg1 = vga_rgfx(NULL, 0x20) & 0x03;
}
/* If we are using a fixed mode, then tell the chip we are. */
static void neofb_update_start(struct fb_info *info,
struct fb_var_screeninfo *var)
{
- struct neofb_par *par = (struct neofb_par *) info->par;
+ struct neofb_par *par = info->par;
struct vgastate *state = &par->state;
int oldExtCRTDispAddr;
int Base;
* wms...Enable VESA DPMS compatible powerdown mode
* run "setterm -powersave powerdown" to take advantage
*/
- struct neofb_par *par = (struct neofb_par *)info->par;
- int seqflags, lcdflags, dpmsflags, reg;
+ struct neofb_par *par = info->par;
+ int seqflags, lcdflags, dpmsflags, reg, tmpdisp;
+
+ /*
+ * Read back the register bits related to display configuration. They might
+ * have been changed underneath the driver via Fn key stroke.
+ */
+ neoUnlock();
+ tmpdisp = vga_rgfx(NULL, 0x20) & 0x03;
+ neoLock(&par->state);
+
+ /* In case we blank the screen, we want to store the possibly new
+ * configuration in the driver. During un-blank, we re-apply this setting,
+ * since the LCD bit will be cleared in order to switch off the backlight.
+ */
+ if (par->PanelDispCntlRegRead) {
+ par->PanelDispCntlReg1 = tmpdisp;
+ }
+ par->PanelDispCntlRegRead = !blank_mode;
switch (blank_mode) {
case FB_BLANK_POWERDOWN: /* powerdown - both sync lines down */
break;
case FB_BLANK_NORMAL: /* just blank screen (backlight stays on) */
seqflags = VGA_SR01_SCREEN_OFF; /* Disable sequencer */
- lcdflags = par->PanelDispCntlReg1 & 0x02; /* LCD normal */
- dpmsflags = 0; /* no hsync/vsync suppression */
+ /*
+ * During a blank operation with the LID shut, we might store "LCD off"
+ * by mistake. Due to timing issues, the BIOS may switch the lights
+ * back on, and we turn it back off once we "unblank".
+ *
+ * So here is an attempt to implement ">=" - if we are in the process
+ * of unblanking, and the LCD bit is unset in the driver but set in the
+ * register, we must keep it.
+ */
+ lcdflags = ((par->PanelDispCntlReg1 | tmpdisp) & 0x02); /* LCD normal */
+ dpmsflags = 0x00; /* no hsync/vsync suppression */
break;
case FB_BLANK_UNBLANK: /* unblank */
seqflags = 0; /* Enable sequencer */
- lcdflags = par->PanelDispCntlReg1 & 0x02; /* LCD normal */
+ lcdflags = ((par->PanelDispCntlReg1 | tmpdisp) & 0x02); /* LCD normal */
dpmsflags = 0x00; /* no hsync/vsync suppression */
#ifdef CONFIG_TOSHIBA
/* Do we still need this ? */
static void
neo2200_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
{
- struct neofb_par *par = (struct neofb_par *) info->par;
+ struct neofb_par *par = info->par;
u_long dst, rop;
dst = rect->dx + rect->dy * info->var.xres_virtual;
neo2200_copyarea(struct fb_info *info, const struct fb_copyarea *area)
{
u32 sx = area->sx, sy = area->sy, dx = area->dx, dy = area->dy;
- struct neofb_par *par = (struct neofb_par *) info->par;
+ struct neofb_par *par = info->par;
u_long src, dst, bltCntl;
bltCntl = NEO_BC3_FIFO_EN | NEO_BC3_SKIP_MAPPING | 0x0C0000;
static void
neo2200_imageblit(struct fb_info *info, const struct fb_image *image)
{
- struct neofb_par *par = (struct neofb_par *) info->par;
+ struct neofb_par *par = info->par;
int s_pitch = (image->width * image->depth + 7) >> 3;
int scan_align = info->pixmap.scan_align - 1;
int buf_align = info->pixmap.buf_align - 1;
.fb_fillrect = neofb_fillrect,
.fb_copyarea = neofb_copyarea,
.fb_imageblit = neofb_imageblit,
- .fb_cursor = soft_cursor,
};
/* --------------------------------------------------------------------- */
static int __devinit neo_map_mmio(struct fb_info *info,
struct pci_dev *dev)
{
- struct neofb_par *par = (struct neofb_par *) info->par;
+ struct neofb_par *par = info->par;
DBG("neo_map_mmio");
static void neo_unmap_mmio(struct fb_info *info)
{
- struct neofb_par *par = (struct neofb_par *) info->par;
+ struct neofb_par *par = info->par;
DBG("neo_unmap_mmio");
#ifdef CONFIG_MTRR
{
- struct neofb_par *par = (struct neofb_par *) info->par;
+ struct neofb_par *par = info->par;
mtrr_del(par->mtrr, info->fix.smem_start,
info->fix.smem_len);
static int __devinit neo_scan_monitor(struct fb_info *info)
{
- struct neofb_par *par = (struct neofb_par *) info->par;
+ struct neofb_par *par = info->par;
unsigned char type, display;
int w;
static int __devinit neo_init_hw(struct fb_info *info)
{
- struct neofb_par *par = (struct neofb_par *) info->par;
+ struct neofb_par *par = info->par;
int videoRam = 896;
int maxClock = 65000;
int CursorMem = 1024;
struct fb_info *info;
struct neofb_par *par;
- info = framebuffer_alloc(sizeof(struct neofb_par) + sizeof(u32) * 256, &dev->dev);
+ info = framebuffer_alloc(sizeof(struct neofb_par), &dev->dev);
if (!info)
return NULL;
info->fix.accel = id->driver_data;
info->fbops = &neofb_ops;
- info->pseudo_palette = (void *) (par + 1);
+ info->pseudo_palette = par->palette;
return info;
}
git://git.onelab.eu / linux-2.6.git / blobdiff