*
* For licensing information, see the file 'LICENCE' in this directory.
*
- * $Id: fs.c,v 1.46 2004/07/13 08:56:54 dwmw2 Exp $
+ * $Id: fs.c,v 1.32 2003/10/11 11:47:23 dwmw2 Exp $
*
*/
mdata = kmalloc(f->metadata->size, GFP_USER);
if (!mdata)
return -ENOMEM;
- ret = jffs2_read_dnode(c, f, f->metadata, mdata, 0, mdatalen);
+ ret = jffs2_read_dnode(c, f->metadata, mdata, 0, mdatalen);
if (ret) {
kfree(mdata);
return ret;
old_metadata = f->metadata;
- if (ivalid & ATTR_SIZE && inode->i_size > iattr->ia_size)
+ if (ivalid & ATTR_SIZE && inode->i_size > iattr->ia_size) {
+ vmtruncate(inode, iattr->ia_size);
jffs2_truncate_fraglist (c, &f->fragtree, iattr->ia_size);
+ }
if (ivalid & ATTR_SIZE && inode->i_size < iattr->ia_size) {
jffs2_add_full_dnode_to_inode(c, f, new_metadata);
up(&f->sem);
jffs2_complete_reservation(c);
- /* We have to do the vmtruncate() without f->sem held, since
- some pages may be locked and waiting for it in readpage().
- We are protected from a simultaneous write() extending i_size
- back past iattr->ia_size, because do_truncate() holds the
- generic inode semaphore. */
- if (ivalid & ATTR_SIZE && inode->i_size > iattr->ia_size)
- vmtruncate(inode, iattr->ia_size);
-
return 0;
}
case S_IFCHR:
/* Read the device numbers from the media */
D1(printk(KERN_DEBUG "Reading device numbers from flash\n"));
- if (jffs2_read_dnode(c, f, f->metadata, (char *)&rdev, 0, sizeof(rdev)) < 0) {
+ if (jffs2_read_dnode(c, f->metadata, (char *)&rdev, 0, sizeof(rdev)) < 0) {
/* Eep */
printk(KERN_NOTICE "Read device numbers for inode %lu failed\n", (unsigned long)inode->i_ino);
up(&f->sem);
struct iattr iattr;
if (!(inode->i_state & I_DIRTY_DATASYNC)) {
- D2(printk(KERN_DEBUG "jffs2_dirty_inode() not calling setattr() for ino #%lu\n", inode->i_ino));
+ D1(printk(KERN_DEBUG "jffs2_dirty_inode() not calling setattr() for ino #%lu\n", inode->i_ino));
return;
}
/* We stop if it was running, then restart if it needs to.
This also catches the case where it was stopped and this
- is just a remount to restart it.
- Flush the writebuffer, if neccecary, else we loose it */
- if (!(sb->s_flags & MS_RDONLY)) {
+ is just a remount to restart it */
+ if (!(sb->s_flags & MS_RDONLY))
jffs2_stop_garbage_collect_thread(c);
- down(&c->alloc_sem);
- jffs2_flush_wbuf_pad(c);
- up(&c->alloc_sem);
- }
if (!(*flags & MS_RDONLY))
jffs2_start_garbage_collect_thread(c);
D1(printk(KERN_DEBUG "jffs2_write_super()\n"));
jffs2_garbage_collect_trigger(c);
- jffs2_erase_pending_blocks(c, 0);
+ jffs2_erase_pending_blocks(c);
jffs2_flush_wbuf_gc(c, 0);
}
c = JFFS2_SB_INFO(sb);
-#ifndef CONFIG_JFFS2_FS_NAND
- if (c->mtd->type == MTD_NANDFLASH) {
- printk(KERN_ERR "jffs2: Cannot operate on NAND flash unless jffs2 NAND support is compiled in.\n");
- return -EINVAL;
- }
-#endif
-
c->flash_size = c->mtd->size;
/*
* Check, if we have to concatenate physical blocks to larger virtual blocks
* to reduce the memorysize for c->blocks. (kmalloc allows max. 128K allocation)
*/
- c->sector_size = c->mtd->erasesize;
- blocks = c->flash_size / c->sector_size;
- while ((blocks * sizeof (struct jffs2_eraseblock)) > (128 * 1024)) {
+ blocks = c->flash_size / c->mtd->erasesize;
+ while ((blocks * sizeof (struct jffs2_eraseblock)) > (128 * 1024))
blocks >>= 1;
- c->sector_size <<= 1;
- }
- /*
- * Size alignment check
- */
- if ((c->sector_size * blocks) != c->flash_size) {
- c->flash_size = c->sector_size * blocks;
- printk(KERN_INFO "jffs2: Flash size not aligned to erasesize, reducing to %dKiB\n",
- c->flash_size / 1024);
- }
-
+ c->sector_size = c->flash_size / blocks;
if (c->sector_size != c->mtd->erasesize)
printk(KERN_INFO "jffs2: Erase block size too small (%dKiB). Using virtual blocks size (%dKiB) instead\n",
c->mtd->erasesize / 1024, c->sector_size / 1024);
c->cleanmarker_size = sizeof(struct jffs2_unknown_node);
/* Joern -- stick alignment for weird 8-byte-page flash here */
- /* NAND (or other bizarre) flash... do setup accordingly */
- ret = jffs2_flash_setup(c);
- if (ret)
- return ret;
+ if (jffs2_cleanmarker_oob(c)) {
+ /* NAND (or other bizarre) flash... do setup accordingly */
+ ret = jffs2_nand_flash_setup(c);
+ if (ret)
+ return ret;
+ }
c->inocache_list = kmalloc(INOCACHE_HASHSIZE * sizeof(struct jffs2_inode_cache *), GFP_KERNEL);
if (!c->inocache_list) {
out_inohash:
kfree(c->inocache_list);
out_wbuf:
- jffs2_flash_cleanup(c);
-
- return ret;
-}
-
-void jffs2_gc_release_inode(struct jffs2_sb_info *c,
- struct jffs2_inode_info *f)
-{
- iput(OFNI_EDONI_2SFFJ(f));
-}
-
-struct jffs2_inode_info *jffs2_gc_fetch_inode(struct jffs2_sb_info *c,
- int inum, int nlink)
-{
- struct inode *inode;
- struct jffs2_inode_cache *ic;
- if (!nlink) {
- /* The inode has zero nlink but its nodes weren't yet marked
- obsolete. This has to be because we're still waiting for
- the final (close() and) iput() to happen.
-
- There's a possibility that the final iput() could have
- happened while we were contemplating. In order to ensure
- that we don't cause a new read_inode() (which would fail)
- for the inode in question, we use ilookup() in this case
- instead of iget().
-
- The nlink can't _become_ zero at this point because we're
- holding the alloc_sem, and jffs2_do_unlink() would also
- need that while decrementing nlink on any inode.
- */
- inode = ilookup(OFNI_BS_2SFFJ(c), inum);
- if (!inode) {
- D1(printk(KERN_DEBUG "ilookup() failed for ino #%u; inode is probably deleted.\n",
- inum));
-
- spin_lock(&c->inocache_lock);
- ic = jffs2_get_ino_cache(c, inum);
- if (!ic) {
- D1(printk(KERN_DEBUG "Inode cache for ino #%u is gone.\n", inum));
- spin_unlock(&c->inocache_lock);
- return NULL;
- }
- if (ic->state != INO_STATE_CHECKEDABSENT) {
- /* Wait for progress. Don't just loop */
- D1(printk(KERN_DEBUG "Waiting for ino #%u in state %d\n",
- ic->ino, ic->state));
- sleep_on_spinunlock(&c->inocache_wq, &c->inocache_lock);
- } else {
- spin_unlock(&c->inocache_lock);
- }
-
- return NULL;
- }
- } else {
- /* Inode has links to it still; they're not going away because
- jffs2_do_unlink() would need the alloc_sem and we have it.
- Just iget() it, and if read_inode() is necessary that's OK.
- */
- inode = iget(OFNI_BS_2SFFJ(c), inum);
- if (!inode)
- return ERR_PTR(-ENOMEM);
- }
- if (is_bad_inode(inode)) {
- printk(KERN_NOTICE "Eep. read_inode() failed for ino #%u. nlink %d\n",
- inum, nlink);
- /* NB. This will happen again. We need to do something appropriate here. */
- iput(inode);
- return ERR_PTR(-EIO);
- }
-
- return JFFS2_INODE_INFO(inode);
-}
-
-unsigned char *jffs2_gc_fetch_page(struct jffs2_sb_info *c,
- struct jffs2_inode_info *f,
- unsigned long offset,
- unsigned long *priv)
-{
- struct inode *inode = OFNI_EDONI_2SFFJ(f);
- struct page *pg;
-
- pg = read_cache_page(inode->i_mapping, offset >> PAGE_CACHE_SHIFT,
- (void *)jffs2_do_readpage_unlock, inode);
- if (IS_ERR(pg))
- return (void *)pg;
-
- *priv = (unsigned long)pg;
- return kmap(pg);
-}
-
-void jffs2_gc_release_page(struct jffs2_sb_info *c,
- unsigned char *ptr,
- unsigned long *priv)
-{
- struct page *pg = (void *)*priv;
-
- kunmap(pg);
- page_cache_release(pg);
-}
-
-int jffs2_flash_setup(struct jffs2_sb_info *c) {
- int ret = 0;
-
- if (jffs2_cleanmarker_oob(c)) {
- /* NAND flash... do setup accordingly */
- ret = jffs2_nand_flash_setup(c);
- if (ret)
- return ret;
- }
+ jffs2_nand_flash_cleanup(c);
- /* add setups for other bizarre flashes here... */
return ret;
}
-
-void jffs2_flash_cleanup(struct jffs2_sb_info *c) {
-
- if (jffs2_cleanmarker_oob(c)) {
- jffs2_nand_flash_cleanup(c);
- }
-
- /* add cleanups for other bizarre flashes here... */
-}
git://git.onelab.eu / linux-2.6.git / blobdiff