* Copyright (C) 2001-2003 Red Hat, Inc.
* Copyright (C) 2004 Thomas Gleixner <tglx@linutronix.de>
*
- * Created by David Woodhouse <dwmw2@redhat.com>
+ * Created by David Woodhouse <dwmw2@infradead.org>
* Modified debugged and enhanced by Thomas Gleixner <tglx@linutronix.de>
*
* For licensing information, see the file 'LICENCE' in this directory.
*
- * $Id: wbuf.c,v 1.70 2004/07/13 08:58:25 dwmw2 Exp $
+ * $Id: wbuf.c,v 1.100 2005/09/30 13:59:13 dedekind Exp $
*
*/
#include <linux/mtd/mtd.h>
#include <linux/crc32.h>
#include <linux/mtd/nand.h>
+#include <linux/jiffies.h>
+
#include "nodelist.h"
/* For testing write failures */
static unsigned char *brokenbuf;
#endif
+#define PAGE_DIV(x) ( ((unsigned long)(x) / (unsigned long)(c->wbuf_pagesize)) * (unsigned long)(c->wbuf_pagesize) )
+#define PAGE_MOD(x) ( (unsigned long)(x) % (unsigned long)(c->wbuf_pagesize) )
+
/* max. erase failures before we mark a block bad */
#define MAX_ERASE_FAILURES 2
-/* two seconds timeout for timed wbuf-flushing */
-#define WBUF_FLUSH_TIMEOUT 2 * HZ
-
struct jffs2_inodirty {
uint32_t ino;
struct jffs2_inodirty *next;
struct jffs2_inodirty *new;
/* Mark the superblock dirty so that kupdated will flush... */
- OFNI_BS_2SFFJ(c)->s_dirt = 1;
+ jffs2_erase_pending_trigger(c);
if (jffs2_wbuf_pending_for_ino(c, ino))
return;
}
}
-/* Recover from failure to write wbuf. Recover the nodes up to the
- * wbuf, not the one which we were starting to try to write. */
+#define REFILE_NOTEMPTY 0
+#define REFILE_ANYWAY 1
-static void jffs2_wbuf_recover(struct jffs2_sb_info *c)
+static void jffs2_block_refile(struct jffs2_sb_info *c, struct jffs2_eraseblock *jeb, int allow_empty)
{
- struct jffs2_eraseblock *jeb, *new_jeb;
- struct jffs2_raw_node_ref **first_raw, **raw;
- size_t retlen;
- int ret;
- unsigned char *buf;
- uint32_t start, end, ofs, len;
-
- spin_lock(&c->erase_completion_lock);
-
- jeb = &c->blocks[c->wbuf_ofs / c->sector_size];
-
D1(printk("About to refile bad block at %08x\n", jeb->offset));
- D2(jffs2_dump_block_lists(c));
/* File the existing block on the bad_used_list.... */
if (c->nextblock == jeb)
c->nextblock = NULL;
D1(printk("Refiling block at %08x to bad_used_list\n", jeb->offset));
list_add(&jeb->list, &c->bad_used_list);
} else {
- BUG();
+ BUG_ON(allow_empty == REFILE_NOTEMPTY);
/* It has to have had some nodes or we couldn't be here */
D1(printk("Refiling block at %08x to erase_pending_list\n", jeb->offset));
list_add(&jeb->list, &c->erase_pending_list);
c->nr_erasing_blocks++;
jffs2_erase_pending_trigger(c);
}
- D2(jffs2_dump_block_lists(c));
/* Adjust its size counts accordingly */
c->wasted_size += jeb->free_size;
jeb->wasted_size += jeb->free_size;
jeb->free_size = 0;
- ACCT_SANITY_CHECK(c,jeb);
- D1(ACCT_PARANOIA_CHECK(jeb));
+ jffs2_dbg_dump_block_lists_nolock(c);
+ jffs2_dbg_acct_sanity_check_nolock(c,jeb);
+ jffs2_dbg_acct_paranoia_check_nolock(c, jeb);
+}
+
+/* Recover from failure to write wbuf. Recover the nodes up to the
+ * wbuf, not the one which we were starting to try to write. */
+
+static void jffs2_wbuf_recover(struct jffs2_sb_info *c)
+{
+ struct jffs2_eraseblock *jeb, *new_jeb;
+ struct jffs2_raw_node_ref **first_raw, **raw;
+ size_t retlen;
+ int ret;
+ unsigned char *buf;
+ uint32_t start, end, ofs, len;
+
+ spin_lock(&c->erase_completion_lock);
+
+ jeb = &c->blocks[c->wbuf_ofs / c->sector_size];
+
+ jffs2_block_refile(c, jeb, REFILE_NOTEMPTY);
/* Find the first node to be recovered, by skipping over every
node which ends before the wbuf starts, or which is obsolete. */
first_raw = &jeb->first_node;
- while (*first_raw &&
+ while (*first_raw &&
(ref_obsolete(*first_raw) ||
(ref_offset(*first_raw)+ref_totlen(c, jeb, *first_raw)) < c->wbuf_ofs)) {
D1(printk(KERN_DEBUG "Skipping node at 0x%08x(%d)-0x%08x which is either before 0x%08x or obsolete\n",
}
/* Do the read... */
- ret = c->mtd->read_ecc(c->mtd, start, c->wbuf_ofs - start, &retlen, buf, NULL, c->oobinfo);
- if (ret == -EIO && retlen == c->wbuf_ofs - start) {
+ if (jffs2_cleanmarker_oob(c))
+ ret = c->mtd->read_ecc(c->mtd, start, c->wbuf_ofs - start, &retlen, buf, NULL, c->oobinfo);
+ else
+ ret = c->mtd->read(c->mtd, start, c->wbuf_ofs - start, &retlen, buf);
+
+ if (ret == -EBADMSG && retlen == c->wbuf_ofs - start) {
/* ECC recovered */
ret = 0;
}
/* ... and get an allocation of space from a shiny new block instead */
- ret = jffs2_reserve_space_gc(c, end-start, &ofs, &len);
+ ret = jffs2_reserve_space_gc(c, end-start, &ofs, &len, JFFS2_SUMMARY_NOSUM_SIZE);
if (ret) {
printk(KERN_WARNING "Failed to allocate space for wbuf recovery. Data loss ensues.\n");
- if (buf)
- kfree(buf);
+ kfree(buf);
return;
}
if (end-start >= c->wbuf_pagesize) {
- /* Need to do another write immediately. This, btw,
- means that we'll be writing from 'buf' and not from
- the wbuf. Since if we're writing from the wbuf there
- won't be more than a wbuf full of data, now will
- there? :) */
-
+ /* Need to do another write immediately, but it's possible
+ that this is just because the wbuf itself is completely
+ full, and there's nothing earlier read back from the
+ flash. Hence 'buf' isn't necessarily what we're writing
+ from. */
+ unsigned char *rewrite_buf = buf?:c->wbuf;
uint32_t towrite = (end-start) - ((end-start)%c->wbuf_pagesize);
D1(printk(KERN_DEBUG "Write 0x%x bytes at 0x%08x in wbuf recover\n",
towrite, ofs));
-
+
#ifdef BREAKMEHEADER
static int breakme;
if (breakme++ == 20) {
ret = -EIO;
} else
#endif
+ if (jffs2_cleanmarker_oob(c))
ret = c->mtd->write_ecc(c->mtd, ofs, towrite, &retlen,
- buf, NULL, c->oobinfo);
+ rewrite_buf, NULL, c->oobinfo);
+ else
+ ret = c->mtd->write(c->mtd, ofs, towrite, &retlen, rewrite_buf);
if (ret || retlen != towrite) {
/* Argh. We tried. Really we did. */
c->wbuf_len = (end - start) - towrite;
c->wbuf_ofs = ofs + towrite;
- memcpy(c->wbuf, buf + towrite, c->wbuf_len);
+ memmove(c->wbuf, rewrite_buf + towrite, c->wbuf_len);
/* Don't muck about with c->wbuf_inodes. False positives are harmless. */
-
kfree(buf);
} else {
/* OK, now we're left with the dregs in whichever buffer we're using */
else
jeb->last_node = container_of(first_raw, struct jffs2_raw_node_ref, next_phys);
- ACCT_SANITY_CHECK(c,jeb);
- D1(ACCT_PARANOIA_CHECK(jeb));
+ jffs2_dbg_acct_sanity_check_nolock(c, jeb);
+ jffs2_dbg_acct_paranoia_check_nolock(c, jeb);
- ACCT_SANITY_CHECK(c,new_jeb);
- D1(ACCT_PARANOIA_CHECK(new_jeb));
+ jffs2_dbg_acct_sanity_check_nolock(c, new_jeb);
+ jffs2_dbg_acct_paranoia_check_nolock(c, new_jeb);
spin_unlock(&c->erase_completion_lock);
1: Pad, do not adjust nextblock free_size
2: Pad, adjust nextblock free_size
*/
+#define NOPAD 0
+#define PAD_NOACCOUNT 1
+#define PAD_ACCOUNTING 2
+
static int __jffs2_flush_wbuf(struct jffs2_sb_info *c, int pad)
{
int ret;
size_t retlen;
- /* Nothing to do if not NAND flash. In particular, we shouldn't
+ /* Nothing to do if not write-buffering the flash. In particular, we shouldn't
del_timer() the timer we never initialised. */
- if (jffs2_can_mark_obsolete(c))
+ if (!jffs2_is_writebuffered(c))
return 0;
if (!down_trylock(&c->alloc_sem)) {
BUG();
}
- if(!c->wbuf || !c->wbuf_len)
+ if (!c->wbuf_len) /* already checked c->wbuf above */
return 0;
/* claim remaining space on the page
this happens, if we have a change to a new block,
or if fsync forces us to flush the writebuffer.
if we have a switch to next page, we will not have
- enough remaining space for this.
+ enough remaining space for this.
*/
- if (pad) {
+ if (pad ) {
c->wbuf_len = PAD(c->wbuf_len);
-
+
+ /* Pad with JFFS2_DIRTY_BITMASK initially. this helps out ECC'd NOR
+ with 8 byte page size */
+ memset(c->wbuf + c->wbuf_len, 0, c->wbuf_pagesize - c->wbuf_len);
+
if ( c->wbuf_len + sizeof(struct jffs2_unknown_node) < c->wbuf_pagesize) {
struct jffs2_unknown_node *padnode = (void *)(c->wbuf + c->wbuf_len);
padnode->magic = cpu_to_je16(JFFS2_MAGIC_BITMASK);
padnode->nodetype = cpu_to_je16(JFFS2_NODETYPE_PADDING);
padnode->totlen = cpu_to_je32(c->wbuf_pagesize - c->wbuf_len);
padnode->hdr_crc = cpu_to_je32(crc32(0, padnode, sizeof(*padnode)-4));
- } else {
- /* Pad with JFFS2_DIRTY_BITMASK */
- memset(c->wbuf + c->wbuf_len, 0, c->wbuf_pagesize - c->wbuf_len);
}
}
/* else jffs2_flash_writev has actually filled in the rest of the
buffer for us, and will deal with the node refs etc. later. */
-
+
#ifdef BREAKME
static int breakme;
if (breakme++ == 20) {
c->mtd->write_ecc(c->mtd, c->wbuf_ofs, c->wbuf_pagesize,
&retlen, brokenbuf, NULL, c->oobinfo);
ret = -EIO;
- } else
+ } else
#endif
- ret = c->mtd->write_ecc(c->mtd, c->wbuf_ofs, c->wbuf_pagesize, &retlen, c->wbuf, NULL, c->oobinfo);
+ if (jffs2_cleanmarker_oob(c))
+ ret = c->mtd->write_ecc(c->mtd, c->wbuf_ofs, c->wbuf_pagesize, &retlen, c->wbuf, NULL, c->oobinfo);
+ else
+ ret = c->mtd->write(c->mtd, c->wbuf_ofs, c->wbuf_pagesize, &retlen, c->wbuf);
if (ret || retlen != c->wbuf_pagesize) {
if (ret)
jffs2_wbuf_recover(c);
- return ret;
+ return ret;
}
spin_lock(&c->erase_completion_lock);
D1(printk(KERN_DEBUG "jffs2_flush_wbuf() adjusting free_size of %sblock at %08x\n",
(jeb==c->nextblock)?"next":"", jeb->offset));
- /* wbuf_pagesize - wbuf_len is the amount of space that's to be
+ /* wbuf_pagesize - wbuf_len is the amount of space that's to be
padded. If there is less free space in the block than that,
something screwed up */
if (jeb->free_size < (c->wbuf_pagesize - c->wbuf_len)) {
return 0;
}
-/* Trigger garbage collection to flush the write-buffer.
+/* Trigger garbage collection to flush the write-buffer.
If ino arg is zero, do it if _any_ real (i.e. not GC) writes are
- outstanding. If ino arg non-zero, do it only if a write for the
+ outstanding. If ino arg non-zero, do it only if a write for the
given inode is outstanding. */
int jffs2_flush_wbuf_gc(struct jffs2_sb_info *c, uint32_t ino)
{
D1(printk(KERN_DEBUG "jffs2_flush_wbuf_gc() called for ino #%u...\n", ino));
+ if (!c->wbuf)
+ return 0;
+
down(&c->alloc_sem);
if (!jffs2_wbuf_pending_for_ino(c, ino)) {
D1(printk(KERN_DEBUG "Ino #%d not pending in wbuf. Returning\n", ino));
if (c->unchecked_size) {
/* GC won't make any progress for a while */
D1(printk(KERN_DEBUG "jffs2_flush_wbuf_gc() padding. Not finished checking\n"));
- ret = __jffs2_flush_wbuf(c, 2);
+ down_write(&c->wbuf_sem);
+ ret = __jffs2_flush_wbuf(c, PAD_ACCOUNTING);
+ /* retry flushing wbuf in case jffs2_wbuf_recover
+ left some data in the wbuf */
+ if (ret)
+ ret = __jffs2_flush_wbuf(c, PAD_ACCOUNTING);
+ up_write(&c->wbuf_sem);
} else while (old_wbuf_len &&
old_wbuf_ofs == c->wbuf_ofs) {
if (ret) {
/* GC failed. Flush it with padding instead */
down(&c->alloc_sem);
- ret = __jffs2_flush_wbuf(c, 2);
+ down_write(&c->wbuf_sem);
+ ret = __jffs2_flush_wbuf(c, PAD_ACCOUNTING);
+ /* retry flushing wbuf in case jffs2_wbuf_recover
+ left some data in the wbuf */
+ if (ret)
+ ret = __jffs2_flush_wbuf(c, PAD_ACCOUNTING);
+ up_write(&c->wbuf_sem);
break;
}
down(&c->alloc_sem);
/* Pad write-buffer to end and write it, wasting space. */
int jffs2_flush_wbuf_pad(struct jffs2_sb_info *c)
{
- return __jffs2_flush_wbuf(c, 1);
-}
+ int ret;
+
+ if (!c->wbuf)
+ return 0;
+ down_write(&c->wbuf_sem);
+ ret = __jffs2_flush_wbuf(c, PAD_NOACCOUNT);
+ /* retry - maybe wbuf recover left some data in wbuf. */
+ if (ret)
+ ret = __jffs2_flush_wbuf(c, PAD_NOACCOUNT);
+ up_write(&c->wbuf_sem);
-#define PAGE_DIV(x) ( (x) & (~(c->wbuf_pagesize - 1)) )
-#define PAGE_MOD(x) ( (x) & (c->wbuf_pagesize - 1) )
+ return ret;
+}
int jffs2_flash_writev(struct jffs2_sb_info *c, const struct kvec *invecs, unsigned long count, loff_t to, size_t *retlen, uint32_t ino)
{
struct kvec outvecs[3];
uint32_t outvec_to = to;
/* If not NAND flash, don't bother */
- if (!c->wbuf)
+ if (!jffs2_is_writebuffered(c))
return jffs2_flash_direct_writev(c, invecs, count, to, retlen);
-
+
+ down_write(&c->wbuf_sem);
+
/* If wbuf_ofs is not initialized, set it to target address */
if (c->wbuf_ofs == 0xFFFFFFFF) {
c->wbuf_ofs = PAGE_DIV(to);
- c->wbuf_len = PAGE_MOD(to);
+ c->wbuf_len = PAGE_MOD(to);
memset(c->wbuf,0xff,c->wbuf_pagesize);
}
- /* Sanity checks on target address.
- It's permitted to write at PAD(c->wbuf_len+c->wbuf_ofs),
- and it's permitted to write at the beginning of a new
+ /* Fixup the wbuf if we are moving to a new eraseblock. The checks below
+ fail for ECC'd NOR because cleanmarker == 16, so a block starts at
+ xxx0010. */
+ if (jffs2_nor_ecc(c)) {
+ if (((c->wbuf_ofs % c->sector_size) == 0) && !c->wbuf_len) {
+ c->wbuf_ofs = PAGE_DIV(to);
+ c->wbuf_len = PAGE_MOD(to);
+ memset(c->wbuf,0xff,c->wbuf_pagesize);
+ }
+ }
+
+ /* Sanity checks on target address.
+ It's permitted to write at PAD(c->wbuf_len+c->wbuf_ofs),
+ and it's permitted to write at the beginning of a new
erase block. Anything else, and you die.
New block starts at xxx000c (0-b = block header)
*/
- if ( (to & ~(c->sector_size-1)) != (c->wbuf_ofs & ~(c->sector_size-1)) ) {
+ if (SECTOR_ADDR(to) != SECTOR_ADDR(c->wbuf_ofs)) {
/* It's a write to a new block */
if (c->wbuf_len) {
D1(printk(KERN_DEBUG "jffs2_flash_writev() to 0x%lx causes flush of wbuf at 0x%08x\n", (unsigned long)to, c->wbuf_ofs));
- ret = jffs2_flush_wbuf_pad(c);
+ ret = __jffs2_flush_wbuf(c, PAD_NOACCOUNT);
if (ret) {
/* the underlying layer has to check wbuf_len to do the cleanup */
D1(printk(KERN_WARNING "jffs2_flush_wbuf() called from jffs2_flash_writev() failed %d\n", ret));
*retlen = 0;
- return ret;
+ goto exit;
}
}
/* set pointer to new block */
c->wbuf_ofs = PAGE_DIV(to);
- c->wbuf_len = PAGE_MOD(to);
- }
+ c->wbuf_len = PAGE_MOD(to);
+ }
if (to != PAD(c->wbuf_ofs + c->wbuf_len)) {
/* We're not writing immediately after the writebuffer. Bad. */
invec = 0;
outvec = 0;
-
- /* Fill writebuffer first, if already in use */
+ /* Fill writebuffer first, if already in use */
if (c->wbuf_len) {
uint32_t invec_ofs = 0;
- /* adjust alignment offset */
+ /* adjust alignment offset */
if (c->wbuf_len != PAGE_MOD(to)) {
c->wbuf_len = PAGE_MOD(to);
/* take care of alignment to next page */
if (!c->wbuf_len)
c->wbuf_len = c->wbuf_pagesize;
}
-
+
while(c->wbuf_len < c->wbuf_pagesize) {
uint32_t thislen;
-
+
if (invec == count)
goto alldone;
if (thislen >= invecs[invec].iov_len)
thislen = invecs[invec].iov_len;
-
+
invec_ofs = thislen;
memcpy(c->wbuf + c->wbuf_len, invecs[invec].iov_base, thislen);
c->wbuf_len += thislen;
donelen += thislen;
/* Get next invec, if actual did not fill the buffer */
- if (c->wbuf_len < c->wbuf_pagesize)
+ if (c->wbuf_len < c->wbuf_pagesize)
invec++;
- }
-
+ }
+
/* write buffer is full, flush buffer */
- ret = __jffs2_flush_wbuf(c, 0);
+ ret = __jffs2_flush_wbuf(c, NOPAD);
if (ret) {
/* the underlying layer has to check wbuf_len to do the cleanup */
D1(printk(KERN_WARNING "jffs2_flush_wbuf() called from jffs2_flash_writev() failed %d\n", ret));
/* Retlen zero to make sure our caller doesn't mark the space dirty.
We've already done everything that's necessary */
*retlen = 0;
- return ret;
+ goto exit;
}
outvec_to += donelen;
c->wbuf_ofs = outvec_to;
if (splitvec != -1) {
uint32_t remainder;
- int ret;
remainder = outvecs[splitvec].iov_len - split_ofs;
outvecs[splitvec].iov_len = split_ofs;
/* We did cross a page boundary, so we write some now */
- ret = c->mtd->writev_ecc(c->mtd, outvecs, splitvec+1, outvec_to, &wbuf_retlen, NULL, c->oobinfo);
+ if (jffs2_cleanmarker_oob(c))
+ ret = c->mtd->writev_ecc(c->mtd, outvecs, splitvec+1, outvec_to, &wbuf_retlen, NULL, c->oobinfo);
+ else
+ ret = jffs2_flash_direct_writev(c, outvecs, splitvec+1, outvec_to, &wbuf_retlen);
+
if (ret < 0 || wbuf_retlen != PAGE_DIV(totlen)) {
/* At this point we have no problem,
- c->wbuf is empty.
+ c->wbuf is empty. However refile nextblock to avoid
+ writing again to same address.
*/
- *retlen = donelen;
- return ret;
+ struct jffs2_eraseblock *jeb;
+
+ spin_lock(&c->erase_completion_lock);
+
+ jeb = &c->blocks[outvec_to / c->sector_size];
+ jffs2_block_refile(c, jeb, REFILE_ANYWAY);
+
+ *retlen = 0;
+ spin_unlock(&c->erase_completion_lock);
+ goto exit;
}
-
+
donelen += wbuf_retlen;
c->wbuf_ofs = PAGE_DIV(outvec_to) + PAGE_DIV(totlen);
alldone:
*retlen = donelen;
+ if (jffs2_sum_active()) {
+ int res = jffs2_sum_add_kvec(c, invecs, count, (uint32_t) to);
+ if (res)
+ return res;
+ }
+
if (c->wbuf_len && ino)
jffs2_wbuf_dirties_inode(c, ino);
- return 0;
+ ret = 0;
+
+exit:
+ up_write(&c->wbuf_sem);
+ return ret;
}
/*
{
struct kvec vecs[1];
- if (jffs2_can_mark_obsolete(c))
- return c->mtd->write(c->mtd, ofs, len, retlen, buf);
+ if (!jffs2_is_writebuffered(c))
+ return jffs2_flash_direct_write(c, ofs, len, retlen, buf);
vecs[0].iov_base = (unsigned char *) buf;
vecs[0].iov_len = len;
loff_t orbf = 0, owbf = 0, lwbf = 0;
int ret;
+ if (!jffs2_is_writebuffered(c))
+ return c->mtd->read(c->mtd, ofs, len, retlen, buf);
+
/* Read flash */
- if (!jffs2_can_mark_obsolete(c)) {
+ down_read(&c->wbuf_sem);
+ if (jffs2_cleanmarker_oob(c))
ret = c->mtd->read_ecc(c->mtd, ofs, len, retlen, buf, NULL, c->oobinfo);
+ else
+ ret = c->mtd->read(c->mtd, ofs, len, retlen, buf);
- if ( (ret == -EIO) && (*retlen == len) ) {
- printk(KERN_WARNING "mtd->read(0x%zx bytes from 0x%llx) returned ECC error\n",
- len, ofs);
- /*
- * We have the raw data without ECC correction in the buffer, maybe
- * we are lucky and all data or parts are correct. We check the node.
- * If data are corrupted node check will sort it out.
- * We keep this block, it will fail on write or erase and the we
- * mark it bad. Or should we do that now? But we should give him a chance.
- * Maybe we had a system crash or power loss before the ecc write or
- * a erase was completed.
- * So we return success. :)
- */
- ret = 0;
- }
- } else
- return c->mtd->read(c->mtd, ofs, len, retlen, buf);
+ if ( (ret == -EBADMSG) && (*retlen == len) ) {
+ printk(KERN_WARNING "mtd->read(0x%zx bytes from 0x%llx) returned ECC error\n",
+ len, ofs);
+ /*
+ * We have the raw data without ECC correction in the buffer, maybe
+ * we are lucky and all data or parts are correct. We check the node.
+ * If data are corrupted node check will sort it out.
+ * We keep this block, it will fail on write or erase and the we
+ * mark it bad. Or should we do that now? But we should give him a chance.
+ * Maybe we had a system crash or power loss before the ecc write or
+ * a erase was completed.
+ * So we return success. :)
+ */
+ ret = 0;
+ }
/* if no writebuffer available or write buffer empty, return */
if (!c->wbuf_pagesize || !c->wbuf_len)
- return ret;
+ goto exit;
/* if we read in a different block, return */
- if ( (ofs & ~(c->sector_size-1)) != (c->wbuf_ofs & ~(c->sector_size-1)) )
- return ret;
+ if (SECTOR_ADDR(ofs) != SECTOR_ADDR(c->wbuf_ofs))
+ goto exit;
if (ofs >= c->wbuf_ofs) {
owbf = (ofs - c->wbuf_ofs); /* offset in write buffer */
if (owbf > c->wbuf_len) /* is read beyond write buffer ? */
- return ret;
+ goto exit;
lwbf = c->wbuf_len - owbf; /* number of bytes to copy */
- if (lwbf > len)
+ if (lwbf > len)
lwbf = len;
- } else {
+ } else {
orbf = (c->wbuf_ofs - ofs); /* offset in read buffer */
if (orbf > len) /* is write beyond write buffer ? */
- return ret;
+ goto exit;
lwbf = len - orbf; /* number of bytes to copy */
- if (lwbf > c->wbuf_len)
+ if (lwbf > c->wbuf_len)
lwbf = c->wbuf_len;
- }
+ }
if (lwbf > 0)
memcpy(buf+orbf,c->wbuf+owbf,lwbf);
+exit:
+ up_read(&c->wbuf_sem);
return ret;
}
printk(KERN_NOTICE "jffs2_check_oob_empty(): allocation of temporary data buffer for oob check failed\n");
return -ENOMEM;
}
- /*
+ /*
* if mode = 0, we scan for a total empty oob area, else we have
* to take care of the cleanmarker in the first page of the block
*/
D1(printk(KERN_WARNING "jffs2_check_oob_empty(): Read OOB failed %d for block at %08x\n", ret, jeb->offset));
goto out;
}
-
+
if (retlen < len) {
D1(printk(KERN_WARNING "jffs2_check_oob_empty(): Read OOB return short read "
"(%zd bytes not %d) for block at %08x\n", retlen, len, jeb->offset));
ret = -EIO;
goto out;
}
-
+
/* Special check for first page */
for(i = 0; i < oob_size ; i++) {
/* Yeah, we know about the cleanmarker. */
- if (mode && i >= c->fsdata_pos &&
+ if (mode && i >= c->fsdata_pos &&
i < c->fsdata_pos + c->fsdata_len)
continue;
if (buf[i] != 0xFF) {
D2(printk(KERN_DEBUG "Found %02x at %x in OOB for %08x\n",
- buf[page+i], page+i, jeb->offset));
- ret = 1;
+ buf[i], i, jeb->offset));
+ ret = 1;
goto out;
}
}
- /* we know, we are aligned :) */
+ /* we know, we are aligned :) */
for (page = oob_size; page < len; page += sizeof(long)) {
unsigned long dat = *(unsigned long *)(&buf[page]);
if(dat != -1) {
- ret = 1;
+ ret = 1;
goto out;
}
}
out:
- kfree(buf);
-
+ kfree(buf);
+
return ret;
}
n.totlen = cpu_to_je32(8);
ret = jffs2_flash_write_oob(c, jeb->offset + c->fsdata_pos, c->fsdata_len, &retlen, (unsigned char *)&n);
-
+
if (ret) {
D1(printk(KERN_WARNING "jffs2_write_nand_cleanmarker(): Write failed for block at %08x: error %d\n", jeb->offset, ret));
return ret;
return 0;
}
-/*
+/*
* On NAND we try to mark this block bad. If the block was erased more
* than MAX_ERASE_FAILURES we mark it finaly bad.
* Don't care about failures. This block remains on the erase-pending
D1(printk(KERN_WARNING "jffs2_write_nand_badblock(): Marking bad block at %08x\n", bad_offset));
ret = c->mtd->block_markbad(c->mtd, bad_offset);
-
+
if (ret) {
D1(printk(KERN_WARNING "jffs2_write_nand_badblock(): Write failed for block at %08x: error %d\n", jeb->offset, ret));
return ret;
};
-int jffs2_nand_set_oobinfo(struct jffs2_sb_info *c)
+static int jffs2_nand_set_oobinfo(struct jffs2_sb_info *c)
{
struct nand_oobinfo *oinfo = &c->mtd->oobinfo;
/* Do this only, if we have an oob buffer */
if (!c->mtd->oobsize)
return 0;
-
+
/* Cleanmarker is out-of-band, so inline size zero */
c->cleanmarker_size = 0;
if (oinfo && oinfo->useecc == MTD_NANDECC_AUTOPLACE) {
D1(printk(KERN_DEBUG "JFFS2 using autoplace on NAND\n"));
/* Get the position of the free bytes */
- if (!oinfo->oobfree[0][0]) {
+ if (!oinfo->oobfree[0][1]) {
printk (KERN_WARNING "jffs2_nand_set_oobinfo(): Eeep. Autoplacement selected and no empty space in oob\n");
return -ENOSPC;
}
c->fsdata_len = NAND_JFFS2_OOB16_FSDALEN;
c->badblock_pos = 15;
break;
-
+
default:
D1(printk(KERN_DEBUG "JFFS2 on NAND. No autoplacment info found\n"));
return -EINVAL;
int res;
/* Initialise write buffer */
+ init_rwsem(&c->wbuf_sem);
c->wbuf_pagesize = c->mtd->oobblock;
c->wbuf_ofs = 0xFFFFFFFF;
-
c->wbuf = kmalloc(c->wbuf_pagesize, GFP_KERNEL);
if (!c->wbuf)
return -ENOMEM;
{
kfree(c->wbuf);
}
+
+int jffs2_dataflash_setup(struct jffs2_sb_info *c) {
+ c->cleanmarker_size = 0; /* No cleanmarkers needed */
+
+ /* Initialize write buffer */
+ init_rwsem(&c->wbuf_sem);
+
+
+ c->wbuf_pagesize = c->mtd->erasesize;
+
+ /* Find a suitable c->sector_size
+ * - Not too much sectors
+ * - Sectors have to be at least 4 K + some bytes
+ * - All known dataflashes have erase sizes of 528 or 1056
+ * - we take at least 8 eraseblocks and want to have at least 8K size
+ * - The concatenation should be a power of 2
+ */
+
+ c->sector_size = 8 * c->mtd->erasesize;
+
+ while (c->sector_size < 8192) {
+ c->sector_size *= 2;
+ }
+
+ /* It may be necessary to adjust the flash size */
+ c->flash_size = c->mtd->size;
+
+ if ((c->flash_size % c->sector_size) != 0) {
+ c->flash_size = (c->flash_size / c->sector_size) * c->sector_size;
+ printk(KERN_WARNING "JFFS2 flash size adjusted to %dKiB\n", c->flash_size);
+ };
+
+ c->wbuf_ofs = 0xFFFFFFFF;
+ c->wbuf = kmalloc(c->wbuf_pagesize, GFP_KERNEL);
+ if (!c->wbuf)
+ return -ENOMEM;
+
+ printk(KERN_INFO "JFFS2 write-buffering enabled buffer (%d) erasesize (%d)\n", c->wbuf_pagesize, c->sector_size);
+
+ return 0;
+}
+
+void jffs2_dataflash_cleanup(struct jffs2_sb_info *c) {
+ kfree(c->wbuf);
+}
+
+int jffs2_nor_ecc_flash_setup(struct jffs2_sb_info *c) {
+ /* Cleanmarker is actually larger on the flashes */
+ c->cleanmarker_size = 16;
+
+ /* Initialize write buffer */
+ init_rwsem(&c->wbuf_sem);
+ c->wbuf_pagesize = c->mtd->eccsize;
+ c->wbuf_ofs = 0xFFFFFFFF;
+
+ c->wbuf = kmalloc(c->wbuf_pagesize, GFP_KERNEL);
+ if (!c->wbuf)
+ return -ENOMEM;
+
+ return 0;
+}
+
+void jffs2_nor_ecc_flash_cleanup(struct jffs2_sb_info *c) {
+ kfree(c->wbuf);
+}
+
+int jffs2_nor_wbuf_flash_setup(struct jffs2_sb_info *c) {
+ /* Cleanmarker currently occupies a whole programming region */
+ c->cleanmarker_size = MTD_PROGREGION_SIZE(c->mtd);
+
+ /* Initialize write buffer */
+ init_rwsem(&c->wbuf_sem);
+ c->wbuf_pagesize = MTD_PROGREGION_SIZE(c->mtd);
+ c->wbuf_ofs = 0xFFFFFFFF;
+
+ c->wbuf = kmalloc(c->wbuf_pagesize, GFP_KERNEL);
+ if (!c->wbuf)
+ return -ENOMEM;
+
+ return 0;
+}
+
+void jffs2_nor_wbuf_flash_cleanup(struct jffs2_sb_info *c) {
+ kfree(c->wbuf);
+}
git://git.onelab.eu / linux-2.6.git / blobdiff