* are different.
*/
-#ifndef __ASM_ARCH_OMAP1510_IRQS_H
-#define __ASM_ARCH_OMAP1510_IRQS_H
+#ifndef __ASM_ARCH_OMAP15XX_IRQS_H
+#define __ASM_ARCH_OMAP15XX_IRQS_H
/*
* IRQ numbers for interrupt handler 1
* NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
*
*/
-#define INT_IH2_IRQ 0
#define INT_CAMERA 1
#define INT_FIQ 3
#define INT_RTDX 6
/*
* OMAP-1510 specific IRQ numbers for interrupt handler 1
*/
+#define INT_1510_IH2_IRQ 0
#define INT_1510_RES2 2
#define INT_1510_SPI_TX 4
#define INT_1510_SPI_RX 5
/*
* OMAP-1610 specific IRQ numbers for interrupt handler 1
*/
+#define INT_1610_IH2_IRQ 0
#define INT_1610_IH2_FIQ 2
#define INT_1610_McBSP2_TX 4
#define INT_1610_McBSP2_RX 5
/*
* OMAP-1510 specific IRQ numbers for interrupt handler 2
*/
-#define INT_1510_OS_32kHz_TIMER (22 + IH2_BASE)
#define INT_1510_COM_SPI_RO (31 + IH2_BASE)
/*
#define INT_1610_SoSSI (9 + IH2_BASE)
#define INT_1610_SoSSI_MATCH (19 + IH2_BASE)
#define INT_1610_McBSP2RX_OF (31 + IH2_BASE)
+#define INT_1610_STI (32 + IH2_BASE)
+#define INT_1610_STI_WAKEUP (33 + IH2_BASE)
+#define INT_1610_GPTIMER3 (34 + IH2_BASE)
+#define INT_1610_GPTIMER4 (35 + IH2_BASE)
+#define INT_1610_GPTIMER5 (36 + IH2_BASE)
+#define INT_1610_GPTIMER6 (37 + IH2_BASE)
+#define INT_1610_GPTIMER7 (38 + IH2_BASE)
+#define INT_1610_GPTIMER8 (39 + IH2_BASE)
#define INT_1610_GPIO_BANK2 (40 + IH2_BASE)
#define INT_1610_GPIO_BANK3 (41 + IH2_BASE)
#define INT_1610_MMC2 (42 + IH2_BASE)
+#define INT_1610_CF (43 + IH2_BASE)
+#define INT_1610_WAKE_UP_REQ (46 + IH2_BASE)
#define INT_1610_GPIO_BANK4 (48 + IH2_BASE)
#define INT_1610_SPI (49 + IH2_BASE)
#define INT_1610_DMA_CH6 (53 + IH2_BASE)
#define INT_730_DMA_CH15 (62 + IH2_BASE)
#define INT_730_NAND (63 + IH2_BASE)
+#define INT_24XX_SYS_NIRQ 7
+#define INT_24XX_SDMA_IRQ0 12
+#define INT_24XX_SDMA_IRQ1 13
+#define INT_24XX_SDMA_IRQ2 14
+#define INT_24XX_SDMA_IRQ3 15
+#define INT_24XX_DSS_IRQ 25
+#define INT_24XX_GPIO_BANK1 29
+#define INT_24XX_GPIO_BANK2 30
+#define INT_24XX_GPIO_BANK3 31
+#define INT_24XX_GPIO_BANK4 32
+
/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730) and
* 16 MPUIO lines */
#define OMAP_MAX_GPIO_LINES 192
#define IH_MPUIO_BASE (OMAP_MAX_GPIO_LINES + IH_GPIO_BASE)
#define IH_BOARD_BASE (16 + IH_MPUIO_BASE)
+#define OMAP_IRQ_BIT(irq) (1 << ((irq) % 32))
+
#ifndef __ASSEMBLY__
extern void omap_init_irq(void);
#endif
* The definition of NR_IRQS is in board-specific header file, which is
* included via hardware.h
*/
-#include <asm/arch/hardware.h>
+#include <asm/hardware.h>
#ifndef NR_IRQS
#define NR_IRQS IH_BOARD_BASE