#define PU_PD_SEL_NA 0 /* No pu_pd reg available */
#define PULL_DWN_CTRL_NA 0 /* No pull-down control needed */
-#define DEBUG_MUX
-
-#ifdef DEBUG_MUX
+#ifdef CONFIG_OMAP_MUX_DEBUG
#define MUX_REG(reg, mode_offset, mode) .mux_reg_name = "FUNC_MUX_CTRL_"#reg, \
.mux_reg = FUNC_MUX_CTRL_##reg, \
.mask_offset = mode_offset, \
#define PU_PD_REG(reg, status) .pu_pd_reg = PU_PD_SEL_##reg, \
.pu_pd_val = status,
-#endif // DEBUG_MUX
+#endif /* CONFIG_OMAP_MUX_DEBUG */
#define MUX_CFG(desc, mux_reg, mode_offset, mode, \
pull_reg, pull_bit, pull_status, \
UART3_RTS,
UART3_CLKREQ,
UART3_BCLK, /* 12MHz clock out */
+ Y15_1610_UART3_RTS,
+
+ /* PWT & PWL */
+ PWT,
+ PWL,
/* USB master generic */
R18_USB_VBUS,
R18_1510_USB_GPIO0,
W4_USB_PUEN,
W4_USB_CLKO,
+ W4_USB_HIGHZ,
+ W4_GPIO58,
/* USB1 master */
USB1_SUSP,
USB1_SEO,
+ W13_1610_USB1_SE0,
USB1_TXEN,
USB1_TXD,
USB1_VP,
USB1_VM,
USB1_RCV,
USB1_SPEED,
+ R13_1610_USB1_SPEED,
+ R13_1710_USB1_SE0,
/* USB2 master */
USB2_SUSP,
R19_1510_GPIO1,
M14_1510_GPIO2,
+ /* OMAP1610 GPIO */
+ P18_1610_GPIO3,
+ Y15_1610_GPIO17,
+
+ /* OMAP-1710 GPIO */
+ R18_1710_GPIO0,
+ V2_1710_GPIO10,
+ N21_1710_GPIO14,
+ W15_1710_GPIO40,
+
/* MPUIO */
MPUIO2,
MPUIO4,
/* OMAP-1610 GPIO */
P20_1610_GPIO4,
V9_1610_GPIO7,
+ W8_1610_GPIO9,
N19_1610_GPIO13,
P10_1610_GPIO22,
V5_1610_GPIO24,
AA20_1610_GPIO_41,
+ W19_1610_GPIO48,
+ M7_1610_GPIO62,
/* OMAP-1610 uWire */
V19_1610_UWIRE_SCLK,
P15_1610_UWIRE_CS0,
N15_1610_UWIRE_CS1,
+ /* OMAP-1610 Flash */
+ L3_1610_FLASH_CS2B_OE,
+ M8_1610_FLASH_CS2B_WE,
+
/* First MMC */
MMC_CMD,
MMC_DAT1,
MMC_CLK,
MMC_DAT3,
+ /* OMAP-1710 MMC CMDDIR and DATDIR0 */
+ M15_1710_MMC_CLKI,
+ P19_1710_MMC_CMDDIR,
+ P20_1710_MMC_DATDIR0,
+
/* OMAP-1610 USB0 alternate pin configuration */
W9_USB0_TXEN,
AA9_USB0_VP,
/* Power management */
T20_1610_LOW_PWR,
+ /* MCLK Settings */
+ V5_1710_MCLK_ON,
+ V5_1710_MCLK_OFF,
+ R10_1610_MCLK_ON,
+ R10_1610_MCLK_OFF,
+
+ /* CompactFlash controller */
+ P11_1610_CF_CD2,
+ R11_1610_CF_IOIS16,
+ V10_1610_CF_IREQ,
+ W10_1610_CF_RESET,
+ W11_1610_CF_CD1,
} reg_cfg_t;
#if defined(__MUX_C__) && defined(CONFIG_OMAP_MUX)
* Table of various FUNC_MUX and PULL_DWN combinations for each device.
* See also reg_cfg_t above for the lookup table.
*/
-static reg_cfg_set reg_cfg_table[] = {
+static reg_cfg_set __initdata_or_module
+reg_cfg_table[] = {
/*
* description mux mode mux pull pull pull pu_pd pu dbg
* reg offset mode reg bit ena reg
MUX_CFG("UART3_RTS", 5, 15, 2, 0, 25, 0, NA, 0, 0)
MUX_CFG("UART3_CLKREQ", 9, 27, 0, 2, 5, 0, NA, 0, 0)
MUX_CFG("UART3_BCLK", A, 0, 0, 2, 6, 0, NA, 0, 0)
+MUX_CFG("Y15_1610_UART3_RTS", A, 0, 1, 2, 6, 0, NA, 0, 0)
+
+/* PWT & PWL, conflicts with UART3 */
+MUX_CFG("PWT", 6, 0, 2, 0, 30, 0, NA, 0, 0)
+MUX_CFG("PWL", 6, 3, 1, 0, 31, 1, NA, 0, 0)
/* USB internal master generic */
MUX_CFG("R18_USB_VBUS", 7, 9, 2, 1, 11, 0, NA, 0, 1)
MUX_CFG("R18_1510_USB_GPIO0", 7, 9, 0, 1, 11, 1, NA, 0, 1)
-MUX_CFG("W4_USB_PUEN", D, 3, 0, 3, 5, 1, NA, 0, 1)
+/* works around erratum: W4_USB_PUEN and W4_USB_PUDIS are switched! */
+MUX_CFG("W4_USB_PUEN", D, 3, 3, 3, 5, 1, NA, 0, 1)
MUX_CFG("W4_USB_CLKO", D, 3, 1, 3, 5, 0, NA, 0, 1)
+MUX_CFG("W4_USB_HIGHZ", D, 3, 4, 3, 5, 0, 3, 0, 1)
+MUX_CFG("W4_GPIO58", D, 3, 7, 3, 5, 0, 3, 0, 1)
/* USB1 master */
MUX_CFG("USB1_SUSP", 8, 27, 2, 1, 27, 0, NA, 0, 1)
MUX_CFG("USB1_SE0", 9, 0, 2, 1, 28, 0, NA, 0, 1)
+MUX_CFG("W13_1610_USB1_SE0", 9, 0, 4, 1, 28, 0, NA, 0, 1)
MUX_CFG("USB1_TXEN", 9, 3, 2, 1, 29, 0, NA, 0, 1)
MUX_CFG("USB1_TXD", 9, 24, 1, 2, 4, 0, NA, 0, 1)
MUX_CFG("USB1_VP", A, 3, 1, 2, 7, 0, NA, 0, 1)
MUX_CFG("USB1_VM", A, 6, 1, 2, 8, 0, NA, 0, 1)
MUX_CFG("USB1_RCV", A, 9, 1, 2, 9, 0, NA, 0, 1)
MUX_CFG("USB1_SPEED", A, 12, 2, 2, 10, 0, NA, 0, 1)
+MUX_CFG("R13_1610_USB1_SPEED", A, 12, 5, 2, 10, 0, NA, 0, 1)
+MUX_CFG("R13_1710_USB1_SEO", A, 12, 5, 2, 10, 0, NA, 0, 1)
/* USB2 master */
MUX_CFG("USB2_SUSP", B, 3, 1, 2, 17, 0, NA, 0, 1)
MUX_CFG("USB2_TXD", C, 27, 2, 3, 3, 0, NA, 0, 1)
/* OMAP-1510 GPIO */
-MUX_CFG("R18_1510_GPIO0", 7, 9, 0, 1, 11, 1, 0, 0, 1)
-MUX_CFG("R19_1510_GPIO1", 7, 6, 0, 1, 10, 1, 0, 0, 1)
-MUX_CFG("M14_1510_GPIO2", 7, 3, 0, 1, 9, 1, 0, 0, 1)
+MUX_CFG("R18_1510_GPIO0", 7, 9, 0, 1, 11, 1, 0, 0, 1)
+MUX_CFG("R19_1510_GPIO1", 7, 6, 0, 1, 10, 1, 0, 0, 1)
+MUX_CFG("M14_1510_GPIO2", 7, 3, 0, 1, 9, 1, 0, 0, 1)
+
+/* OMAP1610 GPIO */
+MUX_CFG("P18_1610_GPIO3", 7, 0, 0, 1, 8, 0, NA, 0, 1)
+MUX_CFG("Y15_1610_GPIO17", A, 0, 7, 2, 6, 0, NA, 0, 1)
+
+/* OMAP-1710 GPIO */
+MUX_CFG("R18_1710_GPIO0", 7, 9, 0, 1, 11, 1, 1, 1, 1)
+MUX_CFG("V2_1710_GPIO10", F, 27, 1, 4, 3, 1, 4, 1, 1)
+MUX_CFG("N21_1710_GPIO14", 6, 9, 0, 1, 1, 1, 1, 1, 1)
+MUX_CFG("W15_1710_GPIO40", 9, 27, 7, 2, 5, 1, 2, 1, 1)
/* MPUIO */
MUX_CFG("MPUIO2", 7, 18, 0, 1, 1, 1, NA, 0, 1)
/* OMAP-1610 GPIO */
MUX_CFG("P20_1610_GPIO4", 6, 27, 0, 1, 7, 0, 1, 1, 1)
MUX_CFG("V9_1610_GPIO7", B, 12, 1, 2, 20, 0, 2, 1, 1)
+MUX_CFG("W8_1610_GPIO9", B, 21, 0, 2, 23, 0, 2, 1, 1)
MUX_CFG("N19_1610_GPIO13", 6, 12, 0, 1, 2, 0, 1, 1, 1)
MUX_CFG("P10_1610_GPIO22", C, 0, 7, 2, 26, 0, 2, 1, 1)
MUX_CFG("V5_1610_GPIO24", B, 15, 7, 2, 21, 0, 2, 1, 1)
MUX_CFG("AA20_1610_GPIO_41", 9, 9, 7, 1, 31, 0, 1, 1, 1)
+MUX_CFG("W19_1610_GPIO48", 8, 15, 7, 1, 23, 1, 1, 0, 1)
+MUX_CFG("M7_1610_GPIO62", 10, 0, 0, 4, 24, 0, 4, 0, 1)
/* OMAP-1610 uWire */
MUX_CFG("V19_1610_UWIRE_SCLK", 8, 6, 0, 1, 20, 0, 1, 1, 1)
MUX_CFG("W21_1610_UWIRE_SDO", 8, 3, 0, 1, 19, 0, 1, 1, 1)
MUX_CFG("N14_1610_UWIRE_CS0", 8, 9, 1, 1, 21, 0, 1, 1, 1)
MUX_CFG("P15_1610_UWIRE_CS3", 8, 12, 1, 1, 22, 0, 1, 1, 1)
-MUX_CFG("N15_1610_UWIRE_CS1", 7, 18, 2, NA, 0, 0, NA, 0, 0)
+MUX_CFG("N15_1610_UWIRE_CS1", 7, 18, 2, 1, 14, 0, NA, 0, 1)
-/* First MMC interface, same on 1510 and 1610 */
+/* OMAP-1610 Flash */
+MUX_CFG("L3_1610_FLASH_CS2B_OE",10, 6, 1, NA, 0, 0, NA, 0, 1)
+MUX_CFG("M8_1610_FLASH_CS2B_WE",10, 3, 1, NA, 0, 0, NA, 0, 1)
+
+/* First MMC interface, same on 1510, 1610 and 1710 */
MUX_CFG("MMC_CMD", A, 27, 0, 2, 15, 1, 2, 1, 1)
MUX_CFG("MMC_DAT1", A, 24, 0, 2, 14, 1, 2, 1, 1)
MUX_CFG("MMC_DAT2", A, 18, 0, 2, 12, 1, 2, 1, 1)
MUX_CFG("MMC_DAT0", B, 0, 0, 2, 16, 1, 2, 1, 1)
MUX_CFG("MMC_CLK", A, 21, 0, NA, 0, 0, NA, 0, 1)
MUX_CFG("MMC_DAT3", 10, 15, 0, 3, 8, 1, 3, 1, 1)
+MUX_CFG("M15_1710_MMC_CLKI", 6, 21, 2, 0, 0, 0, NA, 0, 1)
+MUX_CFG("P19_1710_MMC_CMDDIR", 6, 24, 6, 0, 0, 0, NA, 0, 1)
+MUX_CFG("P20_1710_MMC_DATDIR0", 6, 27, 5, 0, 0, 0, NA, 0, 1)
/* OMAP-1610 USB0 alternate configuration */
MUX_CFG("W9_USB0_TXEN", B, 9, 5, 2, 19, 0, 2, 0, 1)
MUX_CFG("N19_1610_KBR5", 6, 12, 1, 1, 2, 1, 1, 1, 0)
/* Power management */
-MUX_CFG("T20_1610_LOW_PWR", 7, 12, 1, 0, 0, 0, NA, 0, 0)
+MUX_CFG("T20_1610_LOW_PWR", 7, 12, 1, NA, 0, 0, NA, 0, 0)
+
+/* MCLK Settings */
+MUX_CFG("V5_1710_MCLK_ON", B, 15, 0, NA, 0, 0, NA, 0, 0)
+MUX_CFG("V5_1710_MCLK_OFF", B, 15, 6, NA, 0, 0, NA, 0, 0)
+MUX_CFG("R10_1610_MCLK_ON", B, 18, 0, NA, 22, 0, NA, 1, 0)
+MUX_CFG("R10_1610_MCLK_OFF", B, 18, 6, 2, 22, 1, 2, 1, 1)
+
+/* CompactFlash controller, conflicts with MMC1 */
+MUX_CFG("P11_1610_CF_CD2", A, 27, 3, 2, 15, 1, 2, 1, 1)
+MUX_CFG("R11_1610_CF_IOIS16", B, 0, 3, 2, 16, 1, 2, 1, 1)
+MUX_CFG("V10_1610_CF_IREQ", A, 24, 3, 2, 14, 0, 2, 0, 1)
+MUX_CFG("W10_1610_CF_RESET", A, 18, 3, 2, 12, 1, 2, 1, 1)
+MUX_CFG("W11_1610_CF_CD1", 10, 15, 3, 3, 8, 1, 3, 1, 1)
};
#endif /* __MUX_C__ */
+#ifdef CONFIG_OMAP_MUX
+/* setup pin muxing in Linux */
extern int omap_cfg_reg(reg_cfg_t reg_cfg);
+#else
+/* boot loader does it all (no warnings from CONFIG_OMAP_MUX_WARNINGS) */
+static inline int omap_cfg_reg(reg_cfg_t reg_cfg) { return 0; }
+#endif
#endif
git://git.onelab.eu / linux-2.6.git / blobdiff