-/* linux/include/asm-arm/arch-omap/omap16xx.h
+/* linux/include/asm-arm/arch-omap/omap1610.h
*
- * Hardware definitions for TI OMAP1610/5912/1710 processors.
+ * Hardware definitions for TI OMAP1610 processor.
*
* Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
*
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#ifndef __ASM_ARCH_OMAP16XX_H
-#define __ASM_ARCH_OMAP16XX_H
+#ifndef __ASM_ARCH_OMAP1610_H
+#define __ASM_ARCH_OMAP1610_H
/*
* ----------------------------------------------------------------------------
/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
-#define OMAP16XX_SRAM_BASE 0xD0000000
+#define OMAP1610_SRAM_BASE 0xD0000000
#define OMAP1610_SRAM_SIZE (SZ_16K)
-#define OMAP5912_SRAM_SIZE 0x3E800
-#define OMAP16XX_SRAM_START 0x20000000
+#define OMAP1610_SRAM_START 0x20000000
-#define OMAP16XX_DSP_BASE 0xE0000000
-#define OMAP16XX_DSP_SIZE 0x28000
-#define OMAP16XX_DSP_START 0xE0000000
+#define OMAP1610_DSP_BASE 0xE0000000
+#define OMAP1610_DSP_SIZE 0x28000
+#define OMAP1610_DSP_START 0xE0000000
-#define OMAP16XX_DSPREG_BASE 0xE1000000
-#define OMAP16XX_DSPREG_SIZE SZ_128K
-#define OMAP16XX_DSPREG_START 0xE1000000
+#define OMAP1610_DSPREG_BASE 0xE1000000
+#define OMAP1610_DSPREG_SIZE SZ_128K
+#define OMAP1610_DSPREG_START 0xE1000000
/*
* ----------------------------------------------------------------------------
* ----------------------------------------------------------------------------
*/
-#define OMAP1610_SRAM_IDLE_SUSPEND (OMAP16XX_SRAM_BASE + OMAP1610_SRAM_SIZE - 0x200)
-#define OMAP5912_SRAM_IDLE_SUSPEND (OMAP16XX_SRAM_BASE + OMAP5912_SRAM_SIZE - 0x200)
+#define OMAP1610_SRAM_IDLE_SUSPEND (OMAP1610_SRAM_BASE + OMAP1610_SRAM_SIZE - 0x200)
#define OMAP1610_SRAM_API_SUSPEND (OMAP1610_SRAM_IDLE_SUSPEND + 0x100)
/*
* Clocks
* ----------------------------------------------------------------------------
*/
-#define OMAP16XX_ARM_IDLECT3 (CLKGEN_REG_BASE + 0x24)
+#define OMAP1610_ARM_IDLECT3 (CLKGEN_REG_BASE + 0x24)
/*
* ----------------------------------------------------------------------------
* Pin configuration registers
* ----------------------------------------------------------------------------
*/
-#define OMAP16XX_CONF_VOLTAGE_VDDSHV6 (1 << 8)
-#define OMAP16XX_CONF_VOLTAGE_VDDSHV7 (1 << 9)
-#define OMAP16XX_CONF_VOLTAGE_VDDSHV8 (1 << 10)
-#define OMAP16XX_CONF_VOLTAGE_VDDSHV9 (1 << 11)
-#define OMAP16XX_SUBLVDS_CONF_VALID (1 << 13)
+#define OMAP1610_CONF_VOLTAGE_VDDSHV6 (1 << 8)
+#define OMAP1610_CONF_VOLTAGE_VDDSHV7 (1 << 9)
+#define OMAP1610_CONF_VOLTAGE_VDDSHV8 (1 << 10)
+#define OMAP1610_CONF_VOLTAGE_VDDSHV9 (1 << 11)
+#define OMAP1610_SUBLVDS_CONF_VALID (1 << 13)
/*
* ---------------------------------------------------------------------------
* ---------------------------------------------------------------------------
*/
#define TIPB_SWITCH_BASE (0xfffbc800)
-#define OMAP16XX_MMCSD2_SSW_MPU_CONF (TIPB_SWITCH_BASE + 0x160)
-
-/* UART3 Registers Maping through MPU bus */
-#define UART3_RHR (OMAP_UART3_BASE + 0)
-#define UART3_THR (OMAP_UART3_BASE + 0)
-#define UART3_DLL (OMAP_UART3_BASE + 0)
-#define UART3_IER (OMAP_UART3_BASE + 4)
-#define UART3_DLH (OMAP_UART3_BASE + 4)
-#define UART3_IIR (OMAP_UART3_BASE + 8)
-#define UART3_FCR (OMAP_UART3_BASE + 8)
-#define UART3_EFR (OMAP_UART3_BASE + 8)
-#define UART3_LCR (OMAP_UART3_BASE + 0x0C)
-#define UART3_MCR (OMAP_UART3_BASE + 0x10)
-#define UART3_XON1_ADDR1 (OMAP_UART3_BASE + 0x10)
-#define UART3_XON2_ADDR2 (OMAP_UART3_BASE + 0x14)
-#define UART3_LSR (OMAP_UART3_BASE + 0x14)
-#define UART3_TCR (OMAP_UART3_BASE + 0x18)
-#define UART3_MSR (OMAP_UART3_BASE + 0x18)
-#define UART3_XOFF1 (OMAP_UART3_BASE + 0x18)
-#define UART3_XOFF2 (OMAP_UART3_BASE + 0x1C)
-#define UART3_SPR (OMAP_UART3_BASE + 0x1C)
-#define UART3_TLR (OMAP_UART3_BASE + 0x1C)
-#define UART3_MDR1 (OMAP_UART3_BASE + 0x20)
-#define UART3_MDR2 (OMAP_UART3_BASE + 0x24)
-#define UART3_SFLSR (OMAP_UART3_BASE + 0x28)
-#define UART3_TXFLL (OMAP_UART3_BASE + 0x28)
-#define UART3_RESUME (OMAP_UART3_BASE + 0x2C)
-#define UART3_TXFLH (OMAP_UART3_BASE + 0x2C)
-#define UART3_SFREGL (OMAP_UART3_BASE + 0x30)
-#define UART3_RXFLL (OMAP_UART3_BASE + 0x30)
-#define UART3_SFREGH (OMAP_UART3_BASE + 0x34)
-#define UART3_RXFLH (OMAP_UART3_BASE + 0x34)
-#define UART3_BLR (OMAP_UART3_BASE + 0x38)
-#define UART3_ACREG (OMAP_UART3_BASE + 0x3C)
-#define UART3_DIV16 (OMAP_UART3_BASE + 0x3C)
-#define UART3_SCR (OMAP_UART3_BASE + 0x40)
-#define UART3_SSR (OMAP_UART3_BASE + 0x44)
-#define UART3_EBLR (OMAP_UART3_BASE + 0x48)
-#define UART3_OSC_12M_SEL (OMAP_UART3_BASE + 0x4C)
-#define UART3_MVR (OMAP_UART3_BASE + 0x50)
+#define OMAP1610_MMCSD2_SSW_MPU_CONF (TIPB_SWITCH_BASE + 0x160)
-/*
- * ----------------------------------------------------------------------------
- * Pulse-Width Light
- * ----------------------------------------------------------------------------
- */
-#define OMAP16XX_PWL_BASE (0xfffb5800)
-#define OMAP16XX_PWL_ENABLE (OMAP16XX_PWL_BASE + 0x00)
-#define OMAP16XX_PWL_CLK_ENABLE (OMAP16XX_PWL_BASE + 0x04)
-
-#endif /* __ASM_ARCH_OMAP16XX_H */
+#endif /* __ASM_ARCH_OMAP1610_H */