/* linux/include/asm-arm/arch-s3c2410/system.h
*
- * (c) 2003 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
+ * Copyright (c) 2003 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
*
* S3C2410 - System function defines and includes
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
- *
- * Changelog:
- * 12-May-2003 BJD Created file
- * 14-May-2003 BJD Removed idle to aid debugging
- * 12-Jun-2003 BJD Added reset via watchdog
- * 04-Sep-2003 BJD Moved to v2.6
- */
+*/
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/arch/map.h>
+#include <asm/arch/idle.h>
#include <asm/arch/regs-watchdog.h>
#include <asm/arch/regs-clock.h>
-extern void printascii(const char *);
+void (*s3c24xx_idle)(void);
-void
-arch_idle(void)
+void s3c24xx_default_idle(void)
{
- //unsigned long reg = S3C2410_CLKCON;
-
- //printascii("arch_idle:\n");
+ void __iomem *reg = S3C2410_CLKCON;
+ unsigned long tmp;
+ int i;
/* idle the system by using the idle mode which will wait for an
* interrupt to happen before restarting the system.
*/
- /* going into idle state upsets the jtag, so don't do it
- * at the moment */
+ /* Warning: going into idle state upsets jtag scanning */
-#if 0
__raw_writel(__raw_readl(reg) | (1<<2), reg);
/* the samsung port seems to do a loop and then unset idle.. */
for (i = 0; i < 50; i++) {
- tmp = __raw_readl(reg); /* ensure loop not optimised out */
+ tmp += __raw_readl(reg); /* ensure loop not optimised out */
}
- //printascii("arch_idle: done\n");
+ /* this bit is not cleared on re-start... */
__raw_writel(__raw_readl(reg) & ~(1<<2), reg);
-#endif
+}
+
+static void arch_idle(void)
+{
+ if (s3c24xx_idle != NULL)
+ (s3c24xx_idle)();
+ else
+ s3c24xx_default_idle();
}
/* set the watchdog to go and reset... */
__raw_writel(S3C2410_WTCON_ENABLE|S3C2410_WTCON_DIV16|S3C2410_WTCON_RSTEN |
- S3C2410_WTCON_PRESCALE(0x80), S3C2410_WTCON);
+ S3C2410_WTCON_PRESCALE(0x20), S3C2410_WTCON);
/* wait for reset to assert... */
mdelay(5000);
- panic("Watchdog reset failed to assert reset\n");
+ printk(KERN_ERR "Watchdog reset failed to assert reset\n");
/* we'll take a jump through zero as a poor second */
cpu_reset(0);