Fedora kernel-2.6.17-1.2142_FC4 patched with stable patch-2.6.17.4-vs2.0.2-rc26.diff

[linux-2.6.git] / include / asm-arm / arch-s3c2410 / uncompress.h

diff --git a/include/asm-arm/arch-s3c2410/uncompress.h b/include/asm-arm/arch-s3c2410/uncompress.h
index fa240af..a6f6a0e 100644 (file)
--- a/include/asm-arm/arch-s3c2410/uncompress.h
+++ b/include/asm-arm/arch-s3c2410/uncompress.h
@@ -15,6 +15,8 @@
  *  12-Mar-2004 BJD  Updated header protection
  *  12-Oct-2004 BJD  Take account of debug uart configuration
  *  15-Nov-2004 BJD  Fixed uart configuration
+ *  22-Feb-2005 BJD  Added watchdog to uncompress
+ *  04-Apr-2005 LCVR Added support to S3C2400 (no cpuid at GSTATUS1)
 */
 
 #ifndef __ASM_ARCH_UNCOMPRESS_H
@@ -25,17 +27,21 @@
 /* defines for UART registers */
 #include "asm/arch/regs-serial.h"
 #include "asm/arch/regs-gpio.h"
+#include "asm/arch/regs-watchdog.h"
 
 #include <asm/arch/map.h>
 
 /* working in physical space... */
 #undef S3C2410_GPIOREG
-#define S3C2410_GPIOREG(x) ((S3C2410_PA_GPIO + (x)))
+#undef S3C2410_WDOGREG
+
+#define S3C2410_GPIOREG(x) ((S3C24XX_PA_GPIO + (x)))
+#define S3C2410_WDOGREG(x) ((S3C24XX_PA_WATCHDOG + (x)))
 
 /* how many bytes we allow into the FIFO at a time in FIFO mode */
 #define FIFO_MAX        (14)
 
-#define uart_base S3C2410_PA_UART + (0x4000*CONFIG_S3C2410_LOWLEVEL_UART_PORT)
+#define uart_base S3C24XX_PA_UART + (0x4000*CONFIG_S3C2410_LOWLEVEL_UART_PORT)
 
 static __inline__ void
 uart_wr(unsigned int reg, unsigned int val)
@@ -56,35 +62,19 @@ uart_rd(unsigned int reg)
 }
 
 
-/* currently we do not need the watchdog... */
-#define arch_decomp_wdog()
-
-
-static void error(char *err);
-
-static void
-arch_decomp_setup(void)
-{
-       /* we may need to setup the uart(s) here if we are not running
-        * on an BAST... the BAST will have left the uarts configured
-        * after calling linux.
-        */
-}
-
 /* we can deal with the case the UARTs are being run
  * in FIFO mode, so that we don't hold up our execution
  * waiting for tx to happen...
 */
 
-static void
-putc(char ch)
+static void putc(int ch)
 {
-       int cpuid = *((volatile unsigned int *)S3C2410_GSTATUS1);
+       int cpuid = S3C2410_GSTATUS1_2410;
 
+#ifndef CONFIG_CPU_S3C2400
+       cpuid = *((volatile unsigned int *)S3C2410_GSTATUS1);
        cpuid &= S3C2410_GSTATUS1_IDMASK;
-
-       if (ch == '\n')
-               putc('\r');    /* expand newline to \r\n */
+#endif
 
        if (uart_rd(S3C2410_UFCON) & S3C2410_UFCON_FIFOMODE) {
                int level;
@@ -107,19 +97,77 @@ putc(char ch)
        } else {
                /* not using fifos */
 
-               while ((uart_rd(S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE) != S3C2410_UTRSTAT_TXE);
+               while ((uart_rd(S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE) != S3C2410_UTRSTAT_TXE)
+                       barrier();
        }
 
        /* write byte to transmission register */
        uart_wr(S3C2410_UTXH, ch);
 }
 
+static inline void flush(void)
+{
+}
+
+#define __raw_writel(d,ad) do { *((volatile unsigned int *)(ad)) = (d); } while(0)
+
+/* CONFIG_S3C2410_BOOT_WATCHDOG
+ *
+ * Simple boot-time watchdog setup, to reboot the system if there is
+ * any problem with the boot process
+*/
+
+#ifdef CONFIG_S3C2410_BOOT_WATCHDOG
+
+#define WDOG_COUNT (0xff00)
+
+static inline void arch_decomp_wdog(void)
+{
+       __raw_writel(WDOG_COUNT, S3C2410_WTCNT);
+}
+
+static void arch_decomp_wdog_start(void)
+{
+       __raw_writel(WDOG_COUNT, S3C2410_WTDAT);
+       __raw_writel(WDOG_COUNT, S3C2410_WTCNT);
+       __raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x40), S3C2410_WTCON);
+}
+
+#else
+#define arch_decomp_wdog_start()
+#define arch_decomp_wdog()
+#endif
+
+#ifdef CONFIG_S3C2410_BOOT_ERROR_RESET
+
+static void arch_decomp_error(const char *x)
+{
+       putstr("\n\n");
+       putstr(x);
+       putstr("\n\n -- System resetting\n");
+
+       __raw_writel(0x4000, S3C2410_WTDAT);
+       __raw_writel(0x4000, S3C2410_WTCNT);
+       __raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x40), S3C2410_WTCON);
+
+       while(1);
+}
+
+#define arch_error arch_decomp_error
+#endif
+
+static void error(char *err);
+
 static void
-putstr(const char *ptr)
+arch_decomp_setup(void)
 {
-       for (; *ptr != '\0'; ptr++) {
-               putc(*ptr);
-       }
+       /* we may need to setup the uart(s) here if we are not running
+        * on an BAST... the BAST will have left the uarts configured
+        * after calling linux.
+        */
+
+       arch_decomp_wdog_start();
 }
 
+
 #endif /* __ASM_ARCH_UNCOMPRESS_H */