#ifndef _ASM_IO_H
#define _ASM_IO_H
-#include <linux/config.h>
+#include <linux/string.h>
+#include <linux/compiler.h>
/*
* This file contains the definitions for the x86 IO instructions
#ifdef __KERNEL__
+#include <asm-generic/iomap.h>
+
#include <linux/vmalloc.h>
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p) __va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p) p
+
/**
* virt_to_phys - map virtual addresses to physical
* @address: address to remap
*/
#define page_to_phys(page) ((dma_addr_t)page_to_pfn(page) << PAGE_SHIFT)
-extern void * __ioremap(unsigned long offset, unsigned long size, unsigned long flags);
+extern void __iomem * __ioremap(unsigned long offset, unsigned long size, unsigned long flags);
/**
* ioremap - map bus memory into CPU space
* address.
*/
-static inline void * ioremap (unsigned long offset, unsigned long size)
+static inline void __iomem * ioremap(unsigned long offset, unsigned long size)
{
return __ioremap(offset, size, 0);
}
-extern void * ioremap_nocache (unsigned long offset, unsigned long size);
-extern void iounmap(void *addr);
+extern void __iomem * ioremap_nocache(unsigned long offset, unsigned long size);
+extern void iounmap(volatile void __iomem *addr);
/*
* bt_ioremap() and bt_iounmap() are for temporary early boot-time
extern void *bt_ioremap(unsigned long offset, unsigned long size);
extern void bt_iounmap(void *addr, unsigned long size);
+/* Use early IO mappings for DMI because it's initialized early */
+#define dmi_ioremap bt_ioremap
+#define dmi_iounmap bt_iounmap
+#define dmi_alloc alloc_bootmem
+
/*
* ISA I/O bus memory addresses are 1:1 with the physical address.
*/
* memory location directly.
*/
-#define readb(addr) (*(volatile unsigned char *) (addr))
-#define readw(addr) (*(volatile unsigned short *) (addr))
-#define readl(addr) (*(volatile unsigned int *) (addr))
+static inline unsigned char readb(const volatile void __iomem *addr)
+{
+ return *(volatile unsigned char __force *) addr;
+}
+static inline unsigned short readw(const volatile void __iomem *addr)
+{
+ return *(volatile unsigned short __force *) addr;
+}
+static inline unsigned int readl(const volatile void __iomem *addr)
+{
+ return *(volatile unsigned int __force *) addr;
+}
#define readb_relaxed(addr) readb(addr)
#define readw_relaxed(addr) readw(addr)
#define readl_relaxed(addr) readl(addr)
#define __raw_readw readw
#define __raw_readl readl
-#define writeb(b,addr) (*(volatile unsigned char *) (addr) = (b))
-#define writew(b,addr) (*(volatile unsigned short *) (addr) = (b))
-#define writel(b,addr) (*(volatile unsigned int *) (addr) = (b))
+static inline void writeb(unsigned char b, volatile void __iomem *addr)
+{
+ *(volatile unsigned char __force *) addr = b;
+}
+static inline void writew(unsigned short b, volatile void __iomem *addr)
+{
+ *(volatile unsigned short __force *) addr = b;
+}
+static inline void writel(unsigned int b, volatile void __iomem *addr)
+{
+ *(volatile unsigned int __force *) addr = b;
+}
#define __raw_writeb writeb
#define __raw_writew writew
#define __raw_writel writel
-#define memset_io(a,b,c) memset((void *)(a),(b),(c))
-#define memcpy_fromio(a,b,c) __memcpy((a),(void *)(b),(c))
-#define memcpy_toio(a,b,c) __memcpy((void *)(a),(b),(c))
+#define mmiowb()
+
+static inline void memset_io(volatile void __iomem *addr, unsigned char val, int count)
+{
+ memset((void __force *) addr, val, count);
+}
+static inline void memcpy_fromio(void *dst, const volatile void __iomem *src, int count)
+{
+ __memcpy(dst, (void __force *) src, count);
+}
+static inline void memcpy_toio(volatile void __iomem *dst, const void *src, int count)
+{
+ __memcpy((void __force *) dst, src, count);
+}
/*
* ISA space is 'always mapped' on a typical x86 system, no need to
* used as the IO-area pointer (it can be iounmapped as well, so the
* analogy with PCI is quite large):
*/
-#define __ISA_IO_base ((char *)(PAGE_OFFSET))
-
-#define isa_readb(a) readb(__ISA_IO_base + (a))
-#define isa_readw(a) readw(__ISA_IO_base + (a))
-#define isa_readl(a) readl(__ISA_IO_base + (a))
-#define isa_writeb(b,a) writeb(b,__ISA_IO_base + (a))
-#define isa_writew(w,a) writew(w,__ISA_IO_base + (a))
-#define isa_writel(l,a) writel(l,__ISA_IO_base + (a))
-#define isa_memset_io(a,b,c) memset_io(__ISA_IO_base + (a),(b),(c))
-#define isa_memcpy_fromio(a,b,c) memcpy_fromio((a),__ISA_IO_base + (b),(c))
-#define isa_memcpy_toio(a,b,c) memcpy_toio(__ISA_IO_base + (a),(b),(c))
-
+#define __ISA_IO_base ((char __iomem *)(PAGE_OFFSET))
/*
* Again, i386 does not require mem IO specific function.
*/
-#define eth_io_copy_and_sum(a,b,c,d) eth_copy_and_sum((a),(void *)(b),(c),(d))
-#define isa_eth_io_copy_and_sum(a,b,c,d) eth_copy_and_sum((a),(void *)(__ISA_IO_base + (b)),(c),(d))
-
-/**
- * check_signature - find BIOS signatures
- * @io_addr: mmio address to check
- * @signature: signature block
- * @length: length of signature
- *
- * Perform a signature comparison with the mmio address io_addr. This
- * address should have been obtained by ioremap.
- * Returns 1 on a match.
- */
-
-static inline int check_signature(unsigned long io_addr,
- const unsigned char *signature, int length)
-{
- int retval = 0;
- do {
- if (readb(io_addr) != *signature)
- goto out;
- io_addr++;
- signature++;
- length--;
- } while (length);
- retval = 1;
-out:
- return retval;
-}
-
-/**
- * isa_check_signature - find BIOS signatures
- * @io_addr: mmio address to check
- * @signature: signature block
- * @length: length of signature
- *
- * Perform a signature comparison with the ISA mmio address io_addr.
- * Returns 1 on a match.
- *
- * This function is deprecated. New drivers should use ioremap and
- * check_signature.
- */
-
-
-static inline int isa_check_signature(unsigned long io_addr,
- const unsigned char *signature, int length)
-{
- int retval = 0;
- do {
- if (isa_readb(io_addr) != *signature)
- goto out;
- io_addr++;
- signature++;
- length--;
- } while (length);
- retval = 1;
-out:
- return retval;
-}
+#define eth_io_copy_and_sum(a,b,c,d) eth_copy_and_sum((a),(void __force *)(b),(c),(d))
/*
* Cache management
#endif /* __KERNEL__ */
-#ifdef SLOW_IO_BY_JUMPING
-#define __SLOW_DOWN_IO "jmp 1f; 1: jmp 1f; 1:"
+#if defined(CONFIG_PARAVIRT)
+#include <asm/paravirt.h>
#else
+
#define __SLOW_DOWN_IO "outb %%al,$0x80;"
-#endif
static inline void slow_down_io(void) {
__asm__ __volatile__(
: : );
}
+#endif
+
#ifdef CONFIG_X86_NUMAQ
extern void *xquad_portio; /* Where the IO area was mapped */
#define XQUAD_PORT_ADDR(port, quad) (xquad_portio + (XQUAD_PORTIO_QUAD*quad) + port)
git://git.onelab.eu / linux-2.6.git / blobdiff