*/
#define access_ok(type,addr,size) (likely(__range_ok(addr,size) == 0))
-/**
- * verify_area: - Obsolete, use access_ok()
- * @type: Type of access: %VERIFY_READ or %VERIFY_WRITE
- * @addr: User space pointer to start of block to check
- * @size: Size of block to check
- *
- * Context: User context only. This function may sleep.
- *
- * This function has been replaced by access_ok().
- *
- * Checks if a pointer to a block of memory in user space is valid.
- *
- * Returns zero if the memory block may be valid, -EFAULT
- * if it is definitely invalid.
- *
- * See access_ok() for more details.
- */
-static inline int verify_area(int type, const void __user * addr, unsigned long size)
-{
- return access_ok(type,addr,size) ? 0 : -EFAULT;
-}
-
-
/*
* The exception table consists of pairs of addresses: the first is the
* address of an instruction that is allowed to fault, and the second is
* On error, the variable @x is set to zero.
*/
#define get_user(x,ptr) \
-({ int __ret_gu,__val_gu; \
+({ int __ret_gu; \
+ unsigned long __val_gu; \
__chk_user_ptr(ptr); \
switch(sizeof (*(ptr))) { \
case 1: __get_user_x(1,__ret_gu,__val_gu,ptr); break; \
extern void __put_user_bad(void);
+/*
+ * Strange magic calling convention: pointer in %ecx,
+ * value in %eax(:%edx), return value in %eax, no clobbers.
+ */
+extern void __put_user_1(void);
+extern void __put_user_2(void);
+extern void __put_user_4(void);
+extern void __put_user_8(void);
+
+#define __put_user_1(x, ptr) __asm__ __volatile__("call __put_user_1":"=a" (__ret_pu):"0" ((typeof(*(ptr)))(x)), "c" (ptr))
+#define __put_user_2(x, ptr) __asm__ __volatile__("call __put_user_2":"=a" (__ret_pu):"0" ((typeof(*(ptr)))(x)), "c" (ptr))
+#define __put_user_4(x, ptr) __asm__ __volatile__("call __put_user_4":"=a" (__ret_pu):"0" ((typeof(*(ptr)))(x)), "c" (ptr))
+#define __put_user_8(x, ptr) __asm__ __volatile__("call __put_user_8":"=a" (__ret_pu):"A" ((typeof(*(ptr)))(x)), "c" (ptr))
+#define __put_user_X(x, ptr) __asm__ __volatile__("call __put_user_X":"=a" (__ret_pu):"c" (ptr))
+
/**
* put_user: - Write a simple value into user space.
* @x: Value to copy to user space.
*
* Returns zero on success, or -EFAULT on error.
*/
-#define put_user(x,ptr) \
- __put_user_check((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr)))
+#ifdef CONFIG_X86_WP_WORKS_OK
+
+#define put_user(x,ptr) \
+({ int __ret_pu; \
+ __typeof__(*(ptr)) __pu_val; \
+ __chk_user_ptr(ptr); \
+ __pu_val = x; \
+ switch(sizeof(*(ptr))) { \
+ case 1: __put_user_1(__pu_val, ptr); break; \
+ case 2: __put_user_2(__pu_val, ptr); break; \
+ case 4: __put_user_4(__pu_val, ptr); break; \
+ case 8: __put_user_8(__pu_val, ptr); break; \
+ default:__put_user_X(__pu_val, ptr); break; \
+ } \
+ __ret_pu; \
+})
+
+#else
+#define put_user(x,ptr) \
+({ \
+ int __ret_pu; \
+ __typeof__(*(ptr)) __pus_tmp = x; \
+ __ret_pu=0; \
+ if(unlikely(__copy_to_user_ll(ptr, &__pus_tmp, \
+ sizeof(*(ptr))) != 0)) \
+ __ret_pu=-EFAULT; \
+ __ret_pu; \
+ })
+#endif
+
/**
* __get_user: - Get a simple variable from user space, with less checking.
* @x: Variable to store result.
})
-#define __put_user_check(x,ptr,size) \
-({ \
- long __pu_err = -EFAULT; \
- __typeof__(*(ptr)) *__pu_addr = (ptr); \
- might_sleep(); \
- if (access_ok(VERIFY_WRITE,__pu_addr,size)) \
- __put_user_size((x),__pu_addr,(size),__pu_err,-EFAULT); \
- __pu_err; \
-})
-
#define __put_user_u64(x, addr, err) \
__asm__ __volatile__( \
"1: movl %%eax,0(%2)\n" \
#endif
struct __large_struct { unsigned long buf[100]; };
-#define __m(x) (*(struct __large_struct *)(x))
+#define __m(x) (*(struct __large_struct __user *)(x))
/*
* Tell gcc we read from memory instead of writing: this is because
#define __get_user_nocheck(x,ptr,size) \
({ \
- long __gu_err, __gu_val; \
+ long __gu_err; \
+ unsigned long __gu_val; \
__get_user_size(__gu_val,(ptr),(size),__gu_err,-EFAULT);\
(x) = (__typeof__(*(ptr)))__gu_val; \
__gu_err; \
: "m"(__m(addr)), "i"(errret), "0"(err))
-unsigned long __copy_to_user_ll(void __user *to, const void *from, unsigned long n);
-unsigned long __copy_from_user_ll(void *to, const void __user *from, unsigned long n);
+unsigned long __must_check __copy_to_user_ll(void __user *to,
+ const void *from, unsigned long n);
+unsigned long __must_check __copy_from_user_ll(void *to,
+ const void __user *from, unsigned long n);
/*
* Here we special-case 1, 2 and 4-byte copy_*_user invocations. On a fault
* Returns number of bytes that could not be copied.
* On success, this will be zero.
*/
-static inline unsigned long
-__copy_to_user(void __user *to, const void *from, unsigned long n)
+static __always_inline unsigned long __must_check
+__copy_to_user_inatomic(void __user *to, const void *from, unsigned long n)
{
if (__builtin_constant_p(n)) {
unsigned long ret;
return __copy_to_user_ll(to, from, n);
}
+static __always_inline unsigned long __must_check
+__copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+ might_sleep();
+ return __copy_to_user_inatomic(to, from, n);
+}
+
/**
* __copy_from_user: - Copy a block of data from user space, with less checking.
* @to: Destination address, in kernel space.
* If some data could not be copied, this function will pad the copied
* data to the requested size using zero bytes.
*/
-static inline unsigned long
-__copy_from_user(void *to, const void __user *from, unsigned long n)
+static __always_inline unsigned long
+__copy_from_user_inatomic(void *to, const void __user *from, unsigned long n)
{
if (__builtin_constant_p(n)) {
unsigned long ret;
return __copy_from_user_ll(to, from, n);
}
-unsigned long copy_to_user(void __user *to, const void *from, unsigned long n);
-unsigned long copy_from_user(void *to,
- const void __user *from, unsigned long n);
-long strncpy_from_user(char *dst, const char __user *src, long count);
-long __strncpy_from_user(char *dst, const char __user *src, long count);
+static __always_inline unsigned long
+__copy_from_user(void *to, const void __user *from, unsigned long n)
+{
+ might_sleep();
+ return __copy_from_user_inatomic(to, from, n);
+}
+unsigned long __must_check copy_to_user(void __user *to,
+ const void *from, unsigned long n);
+unsigned long __must_check copy_from_user(void *to,
+ const void __user *from, unsigned long n);
+long __must_check strncpy_from_user(char *dst, const char __user *src,
+ long count);
+long __must_check __strncpy_from_user(char *dst,
+ const char __user *src, long count);
/**
* strlen_user: - Get the size of a string in user space.
#define strlen_user(str) strnlen_user(str, ~0UL >> 1)
long strnlen_user(const char __user *str, long n);
-unsigned long clear_user(void __user *mem, unsigned long len);
-unsigned long __clear_user(void __user *mem, unsigned long len);
+unsigned long __must_check clear_user(void __user *mem, unsigned long len);
+unsigned long __must_check __clear_user(void __user *mem, unsigned long len);
#endif /* __i386_UACCESS_H */
git://git.onelab.eu / linux-2.6.git / blobdiff