Fedora kernel-2.6.17-1.2142_FC4 patched with stable patch-2.6.17.4-vs2.0.2-rc26.diff

[linux-2.6.git] / include / asm-m68knommu / m527xsim.h

diff --git a/include/asm-m68knommu/m527xsim.h b/include/asm-m68knommu/m527xsim.h
index 82a39bc..e7878d0 100644 (file)
--- a/include/asm-m68knommu/m527xsim.h
+++ b/include/asm-m68knommu/m527xsim.h
@@ -34,5 +34,42 @@
 #define        MCFINT_UART2            15              /* Interrupt number for UART2 */
 #define        MCFINT_PIT1             36              /* Interrupt number for PIT1 */
 
+/*
+ *     SDRAM configuration registers.
+ */
+#ifdef CONFIG_M5271
+#define        MCFSIM_DCR              0x40            /* SDRAM control */
+#define        MCFSIM_DACR0            0x48            /* SDRAM base address 0 */
+#define        MCFSIM_DMR0             0x4c            /* SDRAM address mask 0 */
+#define        MCFSIM_DACR1            0x50            /* SDRAM base address 1 */
+#define        MCFSIM_DMR1             0x54            /* SDRAM address mask 1 */
+#endif
+#ifdef CONFIG_M5275
+#define        MCFSIM_DMR              0x40            /* SDRAM mode */
+#define        MCFSIM_DCR              0x44            /* SDRAM control */
+#define        MCFSIM_DCFG1            0x48            /* SDRAM configuration 1 */
+#define        MCFSIM_DCFG2            0x4c            /* SDRAM configuration 2 */
+#define        MCFSIM_DBAR0            0x50            /* SDRAM base address 0 */
+#define        MCFSIM_DMR0             0x54            /* SDRAM address mask 0 */
+#define        MCFSIM_DBAR1            0x58            /* SDRAM base address 1 */
+#define        MCFSIM_DMR1             0x5c            /* SDRAM address mask 1 */
+#endif
+
+/*
+ *     GPIO pins setups to enable the UARTs.
+ */
+#ifdef CONFIG_M5271
+#define MCF_GPIO_PAR_UART      0x100048        /* PAR UART address */
+#define UART0_ENABLE_MASK      0x000f
+#define UART1_ENABLE_MASK      0x0ff0
+#define UART2_ENABLE_MASK      0x3000
+#endif
+#ifdef CONFIG_M5275
+#define MCF_GPIO_PAR_UART      0x10007c        /* PAR UART address */
+#define UART0_ENABLE_MASK      0x000f
+#define UART1_ENABLE_MASK      0x00f0
+#define UART2_ENABLE_MASK      0x3f00 
+#endif
+
 /****************************************************************************/
 #endif /* m527xsim_h */