* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 2003, 2004 Ralf Baechle
+ * Copyright (C) 2003, 2004 Ralf Baechle <ralf@linux-mips.org>
+ * Copyright (C) MIPS Technologies, Inc.
+ * written by Ralf Baechle <ralf@linux-mips.org>
*/
#ifndef _ASM_HAZARDS_H
#define _ASM_HAZARDS_H
#else /* __ASSEMBLY__ */
__asm__(
- " .macro _ssnop \n\t"
- " sll $0, $2, 1 \n\t"
- " .endm \n\t"
- " \n\t"
- " .macro _ehb \n\t"
- " sll $0, $0, 3 \n\t"
- " .endm \n\t");
+ " .macro _ssnop \n"
+ " sll $0, $0, 1 \n"
+ " .endm \n"
+ " \n"
+ " .macro _ehb \n"
+ " sll $0, $0, 3 \n"
+ " .endm \n");
#ifdef CONFIG_CPU_RM9000
+
/*
* RM9000 hazards. When the JTLB is updated by tlbwi or tlbwr, a subsequent
* use of the JTLB for instructions should not occur for 4 cpu cycles and use
#define mtc0_tlbw_hazard() \
__asm__ __volatile__( \
- ".set\tmips32\n\t" \
- "_ssnop; _ssnop; _ssnop; _ssnop\n\t" \
- ".set\tmips0")
+ " .set mips32 \n" \
+ " _ssnop \n" \
+ " _ssnop \n" \
+ " _ssnop \n" \
+ " _ssnop \n" \
+ " .set mips0 \n")
#define tlbw_use_hazard() \
__asm__ __volatile__( \
- ".set\tmips32\n\t" \
- "_ssnop; _ssnop; _ssnop; _ssnop\n\t" \
- ".set\tmips0")
+ " .set mips32 \n" \
+ " _ssnop \n" \
+ " _ssnop \n" \
+ " _ssnop \n" \
+ " _ssnop \n" \
+ " .set mips0 \n")
+
#else
/*
*/
#define mtc0_tlbw_hazard() \
__asm__ __volatile__( \
- ".set noreorder\n\t" \
- "nop; nop; nop; nop; nop; nop;\n\t" \
- ".set reorder\n\t")
+ " .set noreorder \n" \
+ " nop \n" \
+ " nop \n" \
+ " nop \n" \
+ " nop \n" \
+ " nop \n" \
+ " nop \n" \
+ " .set reorder \n")
#define tlbw_use_hazard() \
__asm__ __volatile__( \
- ".set noreorder\n\t" \
- "nop; nop; nop; nop; nop; nop;\n\t" \
- ".set reorder\n\t")
+ " .set noreorder \n" \
+ " nop \n" \
+ " nop \n" \
+ " nop \n" \
+ " nop \n" \
+ " nop \n" \
+ " nop \n" \
+ " .set reorder \n")
#endif
/*
- * mtc0->mfc0 hazard
- * The 24K has a 2 cycle mtc0/mfc0 execution hazard.
- * It is a MIPS32R2 processor so ehb will clear the hazard.
+ * Interrupt enable/disable hazards
+ * Some processors have hazards when modifying
+ * the status register to change the interrupt state
*/
#ifdef CONFIG_CPU_MIPSR2
-/*
- * Use a macro for ehb unless explicit support for MIPSR2 is enabled
- */
-__asm__(
- " .macro\tirq_enable_hazard \n\t"
- " _ehb \n\t"
- " .endm \n\t"
- " \n\t"
- " .macro\tirq_disable_hazard \n\t"
- " _ehb \n\t"
- " .endm");
-#define irq_enable_hazard() \
- __asm__ __volatile__( \
- "_ehb\t\t\t\t# irq_enable_hazard")
-
-#define irq_disable_hazard() \
- __asm__ __volatile__( \
- "_ehb\t\t\t\t# irq_disable_hazard")
+__asm__(" .macro irq_enable_hazard \n"
+ " _ehb \n"
+ " .endm \n"
+ " \n"
+ " .macro irq_disable_hazard \n"
+ " _ehb \n"
+ " .endm \n");
#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_RM9000)
*/
__asm__(
- " .macro\tirq_enable_hazard \n\t"
- " .endm \n\t"
- " \n\t"
- " .macro\tirq_disable_hazard \n\t"
- " .endm");
-
-#define irq_enable_hazard() do { } while (0)
-#define irq_disable_hazard() do { } while (0)
+ " .macro irq_enable_hazard \n"
+ " .endm \n"
+ " \n"
+ " .macro irq_disable_hazard \n"
+ " .endm \n");
#else
*/
__asm__(
- " # \n\t"
- " # There is a hazard but we do not care \n\t"
- " # \n\t"
- " .macro\tirq_enable_hazard \n\t"
- " .endm \n\t"
- " \n\t"
- " .macro\tirq_disable_hazard \n\t"
- " _ssnop; _ssnop; _ssnop \n\t"
- " .endm");
+ " # \n"
+ " # There is a hazard but we do not care \n"
+ " # \n"
+ " .macro\tirq_enable_hazard \n"
+ " .endm \n"
+ " \n"
+ " .macro\tirq_disable_hazard \n"
+ " _ssnop \n"
+ " _ssnop \n"
+ " _ssnop \n"
+ " .endm \n");
-#define irq_enable_hazard() do { } while (0)
+#endif
+
+#define irq_enable_hazard() \
+ __asm__ __volatile__("irq_enable_hazard")
#define irq_disable_hazard() \
+ __asm__ __volatile__("irq_disable_hazard")
+
+
+/*
+ * Back-to-back hazards -
+ *
+ * What is needed to separate a move to cp0 from a subsequent read from the
+ * same cp0 register?
+ */
+#ifdef CONFIG_CPU_MIPSR2
+
+__asm__(" .macro back_to_back_c0_hazard \n"
+ " _ehb \n"
+ " .endm \n");
+
+#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_RM9000) || \
+ defined(CONFIG_CPU_SB1)
+
+__asm__(" .macro back_to_back_c0_hazard \n"
+ " .endm \n");
+
+#else
+
+__asm__(" .macro back_to_back_c0_hazard \n"
+ " .set noreorder \n"
+ " _ssnop \n"
+ " _ssnop \n"
+ " _ssnop \n"
+ " .set reorder \n"
+ " .endm");
+
+#endif
+
+#define back_to_back_c0_hazard() \
+ __asm__ __volatile__("back_to_back_c0_hazard")
+
+
+/*
+ * Instruction execution hazard
+ */
+#ifdef CONFIG_CPU_MIPSR2
+/*
+ * gcc has a tradition of misscompiling the previous construct using the
+ * address of a label as argument to inline assembler. Gas otoh has the
+ * annoying difference between la and dla which are only usable for 32-bit
+ * rsp. 64-bit code, so can't be used without conditional compilation.
+ * The alterantive is switching the assembler to 64-bit code which happens
+ * to work right even for 32-bit code ...
+ */
+#define instruction_hazard() \
+do { \
+ unsigned long tmp; \
+ \
__asm__ __volatile__( \
- "_ssnop; _ssnop; _ssnop;\t\t# irq_disable_hazard")
+ " .set mips64r2 \n" \
+ " dla %0, 1f \n" \
+ " jr.hb %0 \n" \
+ " .set mips0 \n" \
+ "1: \n" \
+ : "=r" (tmp)); \
+} while (0)
+#else
+#define instruction_hazard() do { } while (0)
#endif
+extern void mips_ihb(void);
+
#endif /* __ASSEMBLY__ */
#endif /* _ASM_HAZARDS_H */