--- /dev/null
+#ifndef _ASM_POWERPC_MPIC_H
+#define _ASM_POWERPC_MPIC_H
+#ifdef __KERNEL__
+
+#include <linux/irq.h>
+
+/*
+ * Global registers
+ */
+
+#define MPIC_GREG_BASE 0x01000
+
+#define MPIC_GREG_FEATURE_0 0x00000
+#define MPIC_GREG_FEATURE_LAST_SRC_MASK 0x07ff0000
+#define MPIC_GREG_FEATURE_LAST_SRC_SHIFT 16
+#define MPIC_GREG_FEATURE_LAST_CPU_MASK 0x00001f00
+#define MPIC_GREG_FEATURE_LAST_CPU_SHIFT 8
+#define MPIC_GREG_FEATURE_VERSION_MASK 0xff
+#define MPIC_GREG_FEATURE_1 0x00010
+#define MPIC_GREG_GLOBAL_CONF_0 0x00020
+#define MPIC_GREG_GCONF_RESET 0x80000000
+#define MPIC_GREG_GCONF_8259_PTHROU_DIS 0x20000000
+#define MPIC_GREG_GCONF_BASE_MASK 0x000fffff
+#define MPIC_GREG_GLOBAL_CONF_1 0x00030
+#define MPIC_GREG_VENDOR_0 0x00040
+#define MPIC_GREG_VENDOR_1 0x00050
+#define MPIC_GREG_VENDOR_2 0x00060
+#define MPIC_GREG_VENDOR_3 0x00070
+#define MPIC_GREG_VENDOR_ID 0x00080
+#define MPIC_GREG_VENDOR_ID_STEPPING_MASK 0x00ff0000
+#define MPIC_GREG_VENDOR_ID_STEPPING_SHIFT 16
+#define MPIC_GREG_VENDOR_ID_DEVICE_ID_MASK 0x0000ff00
+#define MPIC_GREG_VENDOR_ID_DEVICE_ID_SHIFT 8
+#define MPIC_GREG_VENDOR_ID_VENDOR_ID_MASK 0x000000ff
+#define MPIC_GREG_PROCESSOR_INIT 0x00090
+#define MPIC_GREG_IPI_VECTOR_PRI_0 0x000a0
+#define MPIC_GREG_IPI_VECTOR_PRI_1 0x000b0
+#define MPIC_GREG_IPI_VECTOR_PRI_2 0x000c0
+#define MPIC_GREG_IPI_VECTOR_PRI_3 0x000d0
+#define MPIC_GREG_SPURIOUS 0x000e0
+#define MPIC_GREG_TIMER_FREQ 0x000f0
+
+/*
+ *
+ * Timer registers
+ */
+#define MPIC_TIMER_BASE 0x01100
+#define MPIC_TIMER_STRIDE 0x40
+
+#define MPIC_TIMER_CURRENT_CNT 0x00000
+#define MPIC_TIMER_BASE_CNT 0x00010
+#define MPIC_TIMER_VECTOR_PRI 0x00020
+#define MPIC_TIMER_DESTINATION 0x00030
+
+/*
+ * Per-Processor registers
+ */
+
+#define MPIC_CPU_THISBASE 0x00000
+#define MPIC_CPU_BASE 0x20000
+#define MPIC_CPU_STRIDE 0x01000
+
+#define MPIC_CPU_IPI_DISPATCH_0 0x00040
+#define MPIC_CPU_IPI_DISPATCH_1 0x00050
+#define MPIC_CPU_IPI_DISPATCH_2 0x00060
+#define MPIC_CPU_IPI_DISPATCH_3 0x00070
+#define MPIC_CPU_CURRENT_TASK_PRI 0x00080
+#define MPIC_CPU_TASKPRI_MASK 0x0000000f
+#define MPIC_CPU_WHOAMI 0x00090
+#define MPIC_CPU_WHOAMI_MASK 0x0000001f
+#define MPIC_CPU_INTACK 0x000a0
+#define MPIC_CPU_EOI 0x000b0
+
+/*
+ * Per-source registers
+ */
+
+#define MPIC_IRQ_BASE 0x10000
+#define MPIC_IRQ_STRIDE 0x00020
+#define MPIC_IRQ_VECTOR_PRI 0x00000
+#define MPIC_VECPRI_MASK 0x80000000
+#define MPIC_VECPRI_ACTIVITY 0x40000000 /* Read Only */
+#define MPIC_VECPRI_PRIORITY_MASK 0x000f0000
+#define MPIC_VECPRI_PRIORITY_SHIFT 16
+#define MPIC_VECPRI_VECTOR_MASK 0x000007ff
+#define MPIC_VECPRI_POLARITY_POSITIVE 0x00800000
+#define MPIC_VECPRI_POLARITY_NEGATIVE 0x00000000
+#define MPIC_VECPRI_POLARITY_MASK 0x00800000
+#define MPIC_VECPRI_SENSE_LEVEL 0x00400000
+#define MPIC_VECPRI_SENSE_EDGE 0x00000000
+#define MPIC_VECPRI_SENSE_MASK 0x00400000
+#define MPIC_IRQ_DESTINATION 0x00010
+
+#define MPIC_MAX_IRQ_SOURCES 2048
+#define MPIC_MAX_CPUS 32
+#define MPIC_MAX_ISU 32
+
+/*
+ * Special vector numbers (internal use only)
+ */
+#define MPIC_VEC_SPURRIOUS 255
+#define MPIC_VEC_IPI_3 254
+#define MPIC_VEC_IPI_2 253
+#define MPIC_VEC_IPI_1 252
+#define MPIC_VEC_IPI_0 251
+
+/* unused */
+#define MPIC_VEC_TIMER_3 250
+#define MPIC_VEC_TIMER_2 249
+#define MPIC_VEC_TIMER_1 248
+#define MPIC_VEC_TIMER_0 247
+
+/* Type definition of the cascade handler */
+typedef int (*mpic_cascade_t)(struct pt_regs *regs, void *data);
+
+#ifdef CONFIG_MPIC_BROKEN_U3
+/* Fixup table entry */
+struct mpic_irq_fixup
+{
+ u8 __iomem *base;
+ u8 __iomem *applebase;
+ u32 data;
+ unsigned int index;
+};
+#endif /* CONFIG_MPIC_BROKEN_U3 */
+
+
+/* The instance data of a given MPIC */
+struct mpic
+{
+ /* The "linux" controller struct */
+ hw_irq_controller hc_irq;
+#ifdef CONFIG_SMP
+ hw_irq_controller hc_ipi;
+#endif
+ const char *name;
+ /* Flags */
+ unsigned int flags;
+ /* How many irq sources in a given ISU */
+ unsigned int isu_size;
+ unsigned int isu_shift;
+ unsigned int isu_mask;
+ /* Offset of irq vector numbers */
+ unsigned int irq_offset;
+ unsigned int irq_count;
+ /* Offset of ipi vector numbers */
+ unsigned int ipi_offset;
+ /* Number of sources */
+ unsigned int num_sources;
+ /* Number of CPUs */
+ unsigned int num_cpus;
+ /* cascade handler */
+ mpic_cascade_t cascade;
+ void *cascade_data;
+ unsigned int cascade_vec;
+ /* senses array */
+ unsigned char *senses;
+ unsigned int senses_count;
+
+#ifdef CONFIG_MPIC_BROKEN_U3
+ /* The fixup table */
+ struct mpic_irq_fixup *fixups;
+ spinlock_t fixup_lock;
+#endif
+
+ /* The various ioremap'ed bases */
+ volatile u32 __iomem *gregs;
+ volatile u32 __iomem *tmregs;
+ volatile u32 __iomem *cpuregs[MPIC_MAX_CPUS];
+ volatile u32 __iomem *isus[MPIC_MAX_ISU];
+
+ /* link */
+ struct mpic *next;
+};
+
+/* This is the primary controller, only that one has IPIs and
+ * has afinity control. A non-primary MPIC always uses CPU0
+ * registers only
+ */
+#define MPIC_PRIMARY 0x00000001
+/* Set this for a big-endian MPIC */
+#define MPIC_BIG_ENDIAN 0x00000002
+/* Broken U3 MPIC */
+#define MPIC_BROKEN_U3 0x00000004
+/* Broken IPI registers (autodetected) */
+#define MPIC_BROKEN_IPI 0x00000008
+/* MPIC wants a reset */
+#define MPIC_WANTS_RESET 0x00000010
+
+/* Allocate the controller structure and setup the linux irq descs
+ * for the range if interrupts passed in. No HW initialization is
+ * actually performed.
+ *
+ * @phys_addr: physial base address of the MPIC
+ * @flags: flags, see constants above
+ * @isu_size: number of interrupts in an ISU. Use 0 to use a
+ * standard ISU-less setup (aka powermac)
+ * @irq_offset: first irq number to assign to this mpic
+ * @irq_count: number of irqs to use with this mpic IRQ sources. Pass 0
+ * to match the number of sources
+ * @ipi_offset: first irq number to assign to this mpic IPI sources,
+ * used only on primary mpic
+ * @senses: array of sense values
+ * @senses_num: number of entries in the array
+ *
+ * Note about the sense array. If none is passed, all interrupts are
+ * setup to be level negative unless MPIC_BROKEN_U3 is set in which
+ * case they are edge positive (and the array is ignored anyway).
+ * The values in the array start at the first source of the MPIC,
+ * that is senses[0] correspond to linux irq "irq_offset".
+ */
+extern struct mpic *mpic_alloc(unsigned long phys_addr,
+ unsigned int flags,
+ unsigned int isu_size,
+ unsigned int irq_offset,
+ unsigned int irq_count,
+ unsigned int ipi_offset,
+ unsigned char *senses,
+ unsigned int senses_num,
+ const char *name);
+
+/* Assign ISUs, to call before mpic_init()
+ *
+ * @mpic: controller structure as returned by mpic_alloc()
+ * @isu_num: ISU number
+ * @phys_addr: physical address of the ISU
+ */
+extern void mpic_assign_isu(struct mpic *mpic, unsigned int isu_num,
+ unsigned long phys_addr);
+
+/* Initialize the controller. After this has been called, none of the above
+ * should be called again for this mpic
+ */
+extern void mpic_init(struct mpic *mpic);
+
+/* Setup a cascade. Currently, only one cascade is supported this
+ * way, though you can always do a normal request_irq() and add
+ * other cascades this way. You should call this _after_ having
+ * added all the ISUs
+ *
+ * @irq_no: "linux" irq number of the cascade (that is offset'ed vector)
+ * @handler: cascade handler function
+ */
+extern void mpic_setup_cascade(unsigned int irq_no, mpic_cascade_t hanlder,
+ void *data);
+
+/*
+ * All of the following functions must only be used after the
+ * ISUs have been assigned and the controller fully initialized
+ * with mpic_init()
+ */
+
+
+/* Change/Read the priority of an interrupt. Default is 8 for irqs and
+ * 10 for IPIs. You can call this on both IPIs and IRQ numbers, but the
+ * IPI number is then the offset'ed (linux irq number mapped to the IPI)
+ */
+extern void mpic_irq_set_priority(unsigned int irq, unsigned int pri);
+extern unsigned int mpic_irq_get_priority(unsigned int irq);
+
+/* Setup a non-boot CPU */
+extern void mpic_setup_this_cpu(void);
+
+/* Clean up for kexec (or cpu offline or ...) */
+extern void mpic_teardown_this_cpu(int secondary);
+
+/* Get the current cpu priority for this cpu (0..15) */
+extern int mpic_cpu_get_priority(void);
+
+/* Set the current cpu priority for this cpu */
+extern void mpic_cpu_set_priority(int prio);
+
+/* Request IPIs on primary mpic */
+extern void mpic_request_ipis(void);
+
+/* Send an IPI (non offseted number 0..3) */
+extern void mpic_send_ipi(unsigned int ipi_no, unsigned int cpu_mask);
+
+/* Send a message (IPI) to a given target (cpu number or MSG_*) */
+void smp_mpic_message_pass(int target, int msg);
+
+/* Fetch interrupt from a given mpic */
+extern int mpic_get_one_irq(struct mpic *mpic, struct pt_regs *regs);
+/* This one gets to the primary mpic */
+extern int mpic_get_irq(struct pt_regs *regs);
+
+/* global mpic for pSeries */
+extern struct mpic *pSeries_mpic;
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_MPIC_H */
git://git.onelab.eu / linux-2.6.git / blobdiff