#include <linux/config.h>
#include <asm/page.h>
+#include <linux/stringify.h>
#ifndef __ASSEMBLY__
#endif
} mm_context_t;
-#ifdef CONFIG_HUGETLB_PAGE
-#define KERNEL_LOW_HPAGES .htlb_segs = 0,
-#else
-#define KERNEL_LOW_HPAGES
-#endif
+#define STE_ESID_V 0x80
+#define STE_ESID_KS 0x20
+#define STE_ESID_KP 0x10
+#define STE_ESID_N 0x08
-#define KERNEL_CONTEXT(ea) ({ \
- mm_context_t ctx = { .id = REGION_ID(ea), KERNEL_LOW_HPAGES}; \
- ctx; })
-
-typedef struct {
- unsigned long esid: 36; /* Effective segment ID */
- unsigned long resv0:20; /* Reserved */
- unsigned long v: 1; /* Entry valid (v=1) or invalid */
- unsigned long resv1: 1; /* Reserved */
- unsigned long ks: 1; /* Supervisor (privileged) state storage key */
- unsigned long kp: 1; /* Problem state storage key */
- unsigned long n: 1; /* No-execute if n=1 */
- unsigned long resv2: 3; /* padding to a 64b boundary */
-} ste_dword0;
-
-typedef struct {
- unsigned long vsid: 52; /* Virtual segment ID */
- unsigned long resv0:12; /* Padding to a 64b boundary */
-} ste_dword1;
-
-typedef struct _STE {
- union {
- unsigned long dword0;
- ste_dword0 dw0;
- } dw0;
+#define STE_VSID_SHIFT 12
- union {
- unsigned long dword1;
- ste_dword1 dw1;
- } dw1;
-} STE;
+struct stab_entry {
+ unsigned long esid_data;
+ unsigned long vsid_data;
+};
/* Hardware Page Table Entry */
extern HTAB htab_data;
-void invalidate_hpte( unsigned long slot );
-long select_hpte_slot( unsigned long vpn );
-void create_valid_hpte( unsigned long slot, unsigned long vpn,
- unsigned long prpn, unsigned hash,
- void * ptep, unsigned hpteflags,
- unsigned bolted );
-
-#define PD_SHIFT (10+12) /* Page directory */
-#define PD_MASK 0x02FF
-#define PT_SHIFT (12) /* Page Table */
-#define PT_MASK 0x02FF
-
-#define LARGE_PAGE_SHIFT 24
-
static inline unsigned long hpt_hash(unsigned long vpn, int large)
{
unsigned long vsid;
#define STAB0_PHYS_ADDR (STAB0_PAGE<<PAGE_SHIFT)
#define STAB0_VIRT_ADDR (KERNELBASE+STAB0_PHYS_ADDR)
-#define SLB_NUM_BOLTED 2
+#define SLB_NUM_BOLTED 3
#define SLB_CACHE_ENTRIES 8
/* Bits in the SLB ESID word */
#define SLB_VSID_KERNEL (SLB_VSID_KP|SLB_VSID_C)
#define SLB_VSID_USER (SLB_VSID_KP|SLB_VSID_KS)
-#define VSID_RANDOMIZER ASM_CONST(42470972311)
-#define VSID_MASK 0xfffffffffUL
-/* Because we never access addresses below KERNELBASE as kernel
- * addresses, this VSID is never used for anything real, and will
- * never have pages hashed into it */
-#define BAD_VSID ASM_CONST(0)
-
-/* Block size masks */
-#define BL_128K 0x000
-#define BL_256K 0x001
-#define BL_512K 0x003
-#define BL_1M 0x007
-#define BL_2M 0x00F
-#define BL_4M 0x01F
-#define BL_8M 0x03F
-#define BL_16M 0x07F
-#define BL_32M 0x0FF
-#define BL_64M 0x1FF
-#define BL_128M 0x3FF
-#define BL_256M 0x7FF
-
-/* Used to set up SDR1 register */
-#define HASH_TABLE_SIZE_64K 0x00010000
-#define HASH_TABLE_SIZE_128K 0x00020000
-#define HASH_TABLE_SIZE_256K 0x00040000
-#define HASH_TABLE_SIZE_512K 0x00080000
-#define HASH_TABLE_SIZE_1M 0x00100000
-#define HASH_TABLE_SIZE_2M 0x00200000
-#define HASH_TABLE_SIZE_4M 0x00400000
-#define HASH_TABLE_MASK_64K 0x000
-#define HASH_TABLE_MASK_128K 0x001
-#define HASH_TABLE_MASK_256K 0x003
-#define HASH_TABLE_MASK_512K 0x007
-#define HASH_TABLE_MASK_1M 0x00F
-#define HASH_TABLE_MASK_2M 0x01F
-#define HASH_TABLE_MASK_4M 0x03F
-
-/* These are the Ks and Kp from the PowerPC books. For proper operation,
- * Ks = 0, Kp = 1.
- */
-#define MI_AP 786
-#define MI_Ks 0x80000000 /* Should not be set */
-#define MI_Kp 0x40000000 /* Should always be set */
-
-/* The effective page number register. When read, contains the information
- * about the last instruction TLB miss. When MI_RPN is written, bits in
- * this register are used to create the TLB entry.
- */
-#define MI_EPN 787
-#define MI_EPNMASK 0xfffff000 /* Effective page number for entry */
-#define MI_EVALID 0x00000200 /* Entry is valid */
-#define MI_ASIDMASK 0x0000000f /* ASID match value */
- /* Reset value is undefined */
-
-/* A "level 1" or "segment" or whatever you want to call it register.
- * For the instruction TLB, it contains bits that get loaded into the
- * TLB entry when the MI_RPN is written.
- */
-#define MI_TWC 789
-#define MI_APG 0x000001e0 /* Access protection group (0) */
-#define MI_GUARDED 0x00000010 /* Guarded storage */
-#define MI_PSMASK 0x0000000c /* Mask of page size bits */
-#define MI_PS8MEG 0x0000000c /* 8M page size */
-#define MI_PS512K 0x00000004 /* 512K page size */
-#define MI_PS4K_16K 0x00000000 /* 4K or 16K page size */
-#define MI_SVALID 0x00000001 /* Segment entry is valid */
- /* Reset value is undefined */
-
-/* Real page number. Defined by the pte. Writing this register
- * causes a TLB entry to be created for the instruction TLB, using
- * additional information from the MI_EPN, and MI_TWC registers.
- */
-#define MI_RPN 790
-
-/* Define an RPN value for mapping kernel memory to large virtual
- * pages for boot initialization. This has real page number of 0,
- * large page size, shared page, cache enabled, and valid.
- * Also mark all subpages valid and write access.
- */
-#define MI_BOOTINIT 0x000001fd
-
-#define MD_CTR 792 /* Data TLB control register */
-#define MD_GPM 0x80000000 /* Set domain manager mode */
-#define MD_PPM 0x40000000 /* Set subpage protection */
-#define MD_CIDEF 0x20000000 /* Set cache inhibit when MMU dis */
-#define MD_WTDEF 0x10000000 /* Set writethrough when MMU dis */
-#define MD_RSV4I 0x08000000 /* Reserve 4 TLB entries */
-#define MD_TWAM 0x04000000 /* Use 4K page hardware assist */
-#define MD_PPCS 0x02000000 /* Use MI_RPN prob/priv state */
-#define MD_IDXMASK 0x00001f00 /* TLB index to be loaded */
-#define MD_RESETVAL 0x04000000 /* Value of register at reset */
-
-#define M_CASID 793 /* Address space ID (context) to match */
-#define MC_ASIDMASK 0x0000000f /* Bits used for ASID value */
-
+#define VSID_MULTIPLIER ASM_CONST(200730139) /* 28-bit prime */
+#define VSID_BITS 36
+#define VSID_MODULUS ((1UL<<VSID_BITS)-1)
-/* These are the Ks and Kp from the PowerPC books. For proper operation,
- * Ks = 0, Kp = 1.
- */
-#define MD_AP 794
-#define MD_Ks 0x80000000 /* Should not be set */
-#define MD_Kp 0x40000000 /* Should always be set */
+#define CONTEXT_BITS 20
+#define USER_ESID_BITS 15
-/* The effective page number register. When read, contains the information
- * about the last instruction TLB miss. When MD_RPN is written, bits in
- * this register are used to create the TLB entry.
- */
-#define MD_EPN 795
-#define MD_EPNMASK 0xfffff000 /* Effective page number for entry */
-#define MD_EVALID 0x00000200 /* Entry is valid */
-#define MD_ASIDMASK 0x0000000f /* ASID match value */
- /* Reset value is undefined */
-
-/* The pointer to the base address of the first level page table.
- * During a software tablewalk, reading this register provides the address
- * of the entry associated with MD_EPN.
- */
-#define M_TWB 796
-#define M_L1TB 0xfffff000 /* Level 1 table base address */
-#define M_L1INDX 0x00000ffc /* Level 1 index, when read */
- /* Reset value is undefined */
-
-/* A "level 1" or "segment" or whatever you want to call it register.
- * For the data TLB, it contains bits that get loaded into the TLB entry
- * when the MD_RPN is written. It is also provides the hardware assist
- * for finding the PTE address during software tablewalk.
- */
-#define MD_TWC 797
-#define MD_L2TB 0xfffff000 /* Level 2 table base address */
-#define MD_L2INDX 0xfffffe00 /* Level 2 index (*pte), when read */
-#define MD_APG 0x000001e0 /* Access protection group (0) */
-#define MD_GUARDED 0x00000010 /* Guarded storage */
-#define MD_PSMASK 0x0000000c /* Mask of page size bits */
-#define MD_PS8MEG 0x0000000c /* 8M page size */
-#define MD_PS512K 0x00000004 /* 512K page size */
-#define MD_PS4K_16K 0x00000000 /* 4K or 16K page size */
-#define MD_WT 0x00000002 /* Use writethrough page attribute */
-#define MD_SVALID 0x00000001 /* Segment entry is valid */
- /* Reset value is undefined */
-
-
-/* Real page number. Defined by the pte. Writing this register
- * causes a TLB entry to be created for the data TLB, using
- * additional information from the MD_EPN, and MD_TWC registers.
- */
-#define MD_RPN 798
-
-/* This is a temporary storage register that could be used to save
- * a processor working register during a tablewalk.
+/*
+ * This macro generates asm code to compute the VSID scramble
+ * function. Used in slb_allocate() and do_stab_bolted. The function
+ * computed is: (protovsid*VSID_MULTIPLIER) % VSID_MODULUS
+ *
+ * rt = register continaing the proto-VSID and into which the
+ * VSID will be stored
+ * rx = scratch register (clobbered)
+ *
+ * - rt and rx must be different registers
+ * - The answer will end up in the low 36 bits of rt. The higher
+ * bits may contain other garbage, so you may need to mask the
+ * result.
*/
-#define M_TW 799
+#define ASM_VSID_SCRAMBLE(rt, rx) \
+ lis rx,VSID_MULTIPLIER@h; \
+ ori rx,rx,VSID_MULTIPLIER@l; \
+ mulld rt,rt,rx; /* rt = rt * MULTIPLIER */ \
+ \
+ srdi rx,rt,VSID_BITS; \
+ clrldi rt,rt,(64-VSID_BITS); \
+ add rt,rt,rx; /* add high and low bits */ \
+ /* Now, r3 == VSID (mod 2^36-1), and lies between 0 and \
+ * 2^36-1+2^28-1. That in particular means that if r3 >= \
+ * 2^36-1, then r3+1 has the 2^36 bit set. So, if r3+1 has \
+ * the bit clear, r3 already has the answer we want, if it \
+ * doesn't, the answer is the low 36 bits of r3+1. So in all \
+ * cases the answer is the low 36 bits of (r3 + ((r3+1) >> 36))*/\
+ addi rx,rt,1; \
+ srdi rx,rx,VSID_BITS; /* extract 2^36 bit */ \
+ add rt,rt,rx
#endif /* _PPC64_MMU_H_ */