* Copyright (C) 1994-2002 Linus Torvalds & authors
*/
-#include <linux/config.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/hdreg.h>
#include <linux/bio.h>
#include <linux/device.h>
#include <linux/pci.h>
+#include <linux/completion.h>
#include <asm/byteorder.h>
#include <asm/system.h>
#include <asm/io.h>
#include <asm/semaphore.h>
-/*
- * This is the multiple IDE interface driver, as evolved from hd.c.
- * It supports up to four IDE interfaces, on one or more IRQs (usually 14 & 15).
- * There can be up to two drives per interface, as per the ATA-2 spec.
- *
- * Primary i/f: ide0: major=3; (hda) minor=0; (hdb) minor=64
- * Secondary i/f: ide1: major=22; (hdc or hd1a) minor=0; (hdd or hd1b) minor=64
- * Tertiary i/f: ide2: major=33; (hde) minor=0; (hdf) minor=64
- * Quaternary i/f: ide3: major=34; (hdg) minor=0; (hdh) minor=64
- */
-
/******************************************************************************
* IDE driver configuration options (play with these as desired):
*
* REALLY_SLOW_IO can be defined in ide.c and ide-cd.c, if necessary
*/
-#define REALLY_FAST_IO /* define if ide ports are perfect */
#define INITIAL_MULT_COUNT 0 /* off=0; on=2,4,8,16,32, etc.. */
#ifndef SUPPORT_SLOW_DATA_PORTS /* 1 to support slow data ports */
#ifndef OK_TO_RESET_CONTROLLER /* 1 needed for good error recovery */
#define OK_TO_RESET_CONTROLLER 1 /* 0 for use with AH2372A/B interface */
#endif
-#ifndef FANCY_STATUS_DUMPS /* 1 for human-readable drive errors */
-#define FANCY_STATUS_DUMPS 1 /* 0 to reduce kernel size */
-#endif
-
-#ifdef CONFIG_BLK_DEV_CMD640
-#if 0 /* change to 1 when debugging cmd640 problems */
-void cmd640_dump_regs (void);
-#define CMD640_DUMP_REGS cmd640_dump_regs() /* for debugging cmd640 chipset */
-#endif
-#endif /* CONFIG_BLK_DEV_CMD640 */
#ifndef DISABLE_IRQ_NOSYNC
#define DISABLE_IRQ_NOSYNC 0
#define IDE_NO_IRQ (-1)
-/*
- * IDE_DRIVE_CMD is used to implement many features of the hdparm utility
- */
-#define IDE_DRIVE_CMD 99 /* (magic) undef to reduce kernel size*/
-
-#define IDE_DRIVE_TASK 98
-
-/*
- * IDE_DRIVE_TASKFILE is used to implement many features needed for raw tasks
- */
-#define IDE_DRIVE_TASKFILE 97
-
/*
* "No user-serviceable parts" beyond this point :)
*****************************************************************************/
#define DMA_PIO_RETRY 1 /* retrying in PIO */
-/*
- * Ensure that various configuration flags have compatible settings
- */
-#ifdef REALLY_SLOW_IO
-#undef REALLY_FAST_IO
-#endif
-
#define HWIF(drive) ((ide_hwif_t *)((drive)->hwif))
#define HWGROUP(drive) ((ide_hwgroup_t *)(HWIF(drive)->hwgroup))
/*
* Some more useful definitions
*/
-#define IDE_MAJOR_NAME "hd" /* the same for all i/f; see also genhd.c */
-#define MAJOR_NAME IDE_MAJOR_NAME
#define PARTN_BITS 6 /* number of minor dev bits for partitions */
-#define PARTN_MASK ((1<<PARTN_BITS)-1) /* a useful bit mask */
#define MAX_DRIVES 2 /* per interface; 2 assumed by lots of code */
#define SECTOR_SIZE 512
#define SECTOR_WORDS (SECTOR_SIZE / 4) /* number of 32bit words per sector */
* Timeouts for various operations:
*/
#define WAIT_DRQ (HZ/10) /* 100msec - spec allows up to 20ms */
-#if defined(CONFIG_APM) || defined(CONFIG_APM_MODULE)
#define WAIT_READY (5*HZ) /* 5sec - some laptops are very slow */
-#else
-#define WAIT_READY (HZ/10) /* 100msec - should be instantaneous */
-#endif /* CONFIG_APM || CONFIG_APM_MODULE */
#define WAIT_PIDENTIFY (10*HZ) /* 10sec - should be less than 3ms (?), if all ATAPI CD is closed at boot */
#define WAIT_WORSTCASE (30*HZ) /* 30sec - worst case when spinning up */
#define WAIT_CMD (10*HZ) /* 10sec - maximum wait for an IRQ to happen */
#define WAIT_MIN_SLEEP (2*HZ/100) /* 20msec - minimum sleep time */
-#define HOST(hwif,chipset) \
-{ \
- return ((hwif)->chipset == chipset) ? 1 : 0; \
-}
-
/*
* Check for an interrupt and acknowledge the interrupt status
*/
typedef enum { ide_unknown, ide_generic, ide_pci,
ide_cmd640, ide_dtc2278, ide_ali14xx,
ide_qd65xx, ide_umc8672, ide_ht6560b,
- ide_pdc4030, ide_rz1000, ide_trm290,
+ ide_rz1000, ide_trm290,
ide_cmd646, ide_cy82c693, ide_4drives,
ide_pmac, ide_etrax100, ide_acorn,
- ide_pc9800, ide_forced
+ ide_au1xxx, ide_forced
} hwif_chipset_t;
/*
int irq; /* our irq number */
int dma; /* our dma entry */
ide_ack_intr_t *ack_intr; /* acknowledge interrupt */
- void *priv; /* interface specific data */
hwif_chipset_t chipset;
- unsigned long sata_scr[SATA_NR_PORTS];
- unsigned long sata_misc[SATA_NR_PORTS];
+ struct device *dev;
} hw_regs_t;
/*
* Register new hardware with ide
*/
int ide_register_hw(hw_regs_t *hw, struct hwif_s **hwifp);
+int ide_register_hw_with_fixup(hw_regs_t *, struct hwif_s **, void (*)(struct hwif_s *));
/*
* Set up hw_regs_t structure before calling ide_register_hw (optional)
#include <asm/ide.h>
+#if !defined(MAX_HWIFS) || defined(CONFIG_EMBEDDED)
+#undef MAX_HWIFS
+#define MAX_HWIFS CONFIG_IDE_MAX_HWIFS
+#endif
+
+/* needed on alpha, x86/x86_64, ia64, mips, ppc32 and sh */
+#ifndef IDE_ARCH_OBSOLETE_DEFAULTS
+# define ide_default_io_base(index) (0)
+# define ide_default_irq(base) (0)
+# define ide_init_default_irq(base) (0)
+#endif
+
/*
* ide_init_hwif_ports() is OBSOLETE and will be removed in 2.7 series.
* New ports shouldn't define IDE_ARCH_OBSOLETE_INIT in <asm/ide.h>.
- *
- * m68k, m68knommu (broken) and i386-pc9800 (broken)
- * still have their own versions.
*/
-#ifndef CONFIG_M68K
#ifdef IDE_ARCH_OBSOLETE_INIT
static inline void ide_init_hwif_ports(hw_regs_t *hw,
unsigned long io_addr,
#endif
}
#else
-# define ide_init_hwif_ports(hw, io, ctl, irq) do {} while (0)
+static inline void ide_init_hwif_ports(hw_regs_t *hw,
+ unsigned long io_addr,
+ unsigned long ctl_addr,
+ int *irq)
+{
+ if (io_addr || ctl_addr)
+ printk(KERN_WARNING "%s: must not be called\n", __FUNCTION__);
+}
#endif /* IDE_ARCH_OBSOLETE_INIT */
-#endif /* !M68K */
/* Currently only m68k, apus and m8xx need it */
#ifndef IDE_ARCH_ACK_INTR
} b;
} ata_nsector_t, ata_data_t, atapi_bcount_t, ata_index_t;
-/*
- * ATA-IDE Error Register
- *
- * mark : Bad address mark
- * tzero : Couldn't find track 0
- * abrt : Aborted Command
- * mcr : Media Change Request
- * id : ID field not found
- * mce : Media Change Event
- * ecc : Uncorrectable ECC error
- * bdd : dual meaing
- */
-typedef union {
- unsigned all :8;
- struct {
-#if defined(__LITTLE_ENDIAN_BITFIELD)
- unsigned mark :1;
- unsigned tzero :1;
- unsigned abrt :1;
- unsigned mcr :1;
- unsigned id :1;
- unsigned mce :1;
- unsigned ecc :1;
- unsigned bdd :1;
-#elif defined(__BIG_ENDIAN_BITFIELD)
- unsigned bdd :1;
- unsigned ecc :1;
- unsigned mce :1;
- unsigned id :1;
- unsigned mcr :1;
- unsigned abrt :1;
- unsigned tzero :1;
- unsigned mark :1;
-#else
-#error "Please fix <asm/byteorder.h>"
-#endif
- } b;
-} ata_error_t;
-
/*
* ATA-IDE Select Register, aka Device-Head
*
} b;
} ata_status_t, atapi_status_t;
-/*
- * ATA-IDE Control Register
- *
- * bit0 : Should be set to zero
- * nIEN : device INTRQ to host
- * SRST : host soft reset bit
- * bit3 : ATA-2 thingy, Should be set to 1
- * reserved456 : Reserved
- * HOB : 48-bit address ordering, High Ordered Bit
- */
-typedef union {
- unsigned all : 8;
- struct {
-#if defined(__LITTLE_ENDIAN_BITFIELD)
- unsigned bit0 : 1;
- unsigned nIEN : 1;
- unsigned SRST : 1;
- unsigned bit3 : 1;
- unsigned reserved456 : 3;
- unsigned HOB : 1;
-#elif defined(__BIG_ENDIAN_BITFIELD)
- unsigned HOB : 1;
- unsigned reserved456 : 3;
- unsigned bit3 : 1;
- unsigned SRST : 1;
- unsigned nIEN : 1;
- unsigned bit0 : 1;
-#else
-#error "Please fix <asm/byteorder.h>"
-#endif
- } b;
-} ata_control_t;
-
/*
* ATAPI Feature Register
*
} b;
} atapi_error_t;
-/*
- * ATAPI floppy Drive Select Register
- *
- * sam_lun : Logical unit number
- * reserved3 : Reserved
- * drv : The responding drive will be drive 0 (0) or drive 1 (1)
- * one5 : Should be set to 1
- * reserved6 : Reserved
- * one7 : Should be set to 1
- */
-typedef union {
- unsigned all :8;
- struct {
-#if defined(__LITTLE_ENDIAN_BITFIELD)
- unsigned sam_lun :3;
- unsigned reserved3 :1;
- unsigned drv :1;
- unsigned one5 :1;
- unsigned reserved6 :1;
- unsigned one7 :1;
-#elif defined(__BIG_ENDIAN_BITFIELD)
- unsigned one7 :1;
- unsigned reserved6 :1;
- unsigned one5 :1;
- unsigned drv :1;
- unsigned reserved3 :1;
- unsigned sam_lun :3;
-#else
-#error "Please fix <asm/byteorder.h>"
-#endif
- } b;
-} atapi_select_t;
-
/*
* Status returned from various ide_ functions
*/
typedef enum {
ide_stopped, /* no drive operation was started */
ide_started, /* a drive operation was started, handler was set */
- ide_released, /* as ide_started, but bus also released */
} ide_startstop_t;
struct ide_driver_s;
struct request *rq; /* current request */
struct ide_drive_s *next; /* circular list of hwgroup drives */
- struct ide_driver_s *driver;/* (ide_driver_t *) */
void *driver_data; /* extra driver data */
struct hd_driveid *id; /* drive model identification info */
struct proc_dir_entry *proc; /* /proc/ide/ directory entry */
struct ide_settings_s *settings;/* /proc/ide/ drive settings */
- char devfs_name[64]; /* devfs crap */
struct hwif_s *hwif; /* actually (ide_hwif_t *) */
u8 keep_settings; /* restore settings after drive reset */
u8 autodma; /* device can safely use dma on host */
u8 using_dma; /* disk is using dma for read/write */
- u8 using_tcq; /* disk is using queueing */
u8 retry_pio; /* retrying dma capable host in pio */
u8 state; /* retry state */
u8 waiting_for_dma; /* dma currently in progress */
u8 unmask; /* okay to unmask other irqs */
u8 bswap; /* byte swap data */
+ u8 noflush; /* don't attempt flushes */
u8 dsc_overlap; /* DSC overlap */
u8 nice1; /* give potential excess bandwidth */
unsigned noprobe : 1; /* from: hdx=noprobe */
unsigned removable : 1; /* 1 if need to do check_media_change */
unsigned attach : 1; /* needed for removable devices */
- unsigned is_flash : 1; /* 1 if probed as flash */
unsigned forced_geom : 1; /* 1 if hdx=c,h,s was given at boot */
unsigned no_unmask : 1; /* disallow setting unmask bit */
unsigned no_io_32bit : 1; /* disallow enabling 32bit I/O */
* 2=48-bit doing 28-bit
* 3=64-bit
*/
+ unsigned scsi : 1; /* 0=default, 1=ide-scsi emulation */
+ unsigned sleeping : 1; /* 1=sleeping & sleep field valid */
+ unsigned post_reset : 1;
- u8 scsi; /* 0=default, 1=skip current ide-subdriver for ide-scsi emulation */
u8 quirk_list; /* considered quirky, set for a specific host */
- u8 suspend_reset; /* drive suspend mode flag, soft-reset recovers */
u8 init_speed; /* transfer rate set at boot */
u8 pio_speed; /* unused by core, used by some drivers for fallback from DMA */
u8 current_speed; /* current transfer rate set */
+ u8 desired_speed; /* desired transfer rate set */
u8 dn; /* now wide spread use */
u8 wcache; /* status of write cache */
u8 acoustic; /* acoustic management */
u8 sect; /* "real" sectors per track */
u8 bios_head; /* BIOS/fdisk/LILO number of heads */
u8 bios_sect; /* BIOS/fdisk/LILO sectors per track */
- u8 queue_depth; /* max queue depth */
unsigned int bios_cyl; /* BIOS/fdisk/LILO number of cyls */
unsigned int cyl; /* "real" number of cyls */
unsigned int usage; /* current "open()" count for drive */
unsigned int failures; /* current failure count */
unsigned int max_failures; /* maximum allowed failure count */
+ u64 probed_capacity;/* initial reported media capacity (ide-cd only currently) */
u64 capacity64; /* total number of sectors */
int crc_count; /* crc counter to reduce drive speed */
struct list_head list;
struct device gendev;
- struct semaphore gendev_rel_sem; /* to deal with device release() */
- struct gendisk *disk;
+ struct completion gendev_rel_comp; /* to deal with device release() */
} ide_drive_t;
-typedef struct ide_pio_ops_s {
- void (*ata_input_data)(ide_drive_t *, void *, u32);
- void (*ata_output_data)(ide_drive_t *, void *, u32);
-
- void (*atapi_input_bytes)(ide_drive_t *, void *, u32);
- void (*atapi_output_bytes)(ide_drive_t *, void *, u32);
-} ide_pio_ops_t;
-
-typedef struct ide_dma_ops_s {
- /* insert dma operations here! */
- int (*ide_dma_read)(ide_drive_t *drive);
- int (*ide_dma_write)(ide_drive_t *drive);
- int (*ide_dma_begin)(ide_drive_t *drive);
- int (*ide_dma_end)(ide_drive_t *drive);
- int (*ide_dma_check)(ide_drive_t *drive);
- int (*ide_dma_on)(ide_drive_t *drive);
- int (*ide_dma_off_quietly)(ide_drive_t *drive);
- int (*ide_dma_test_irq)(ide_drive_t *drive);
- int (*ide_dma_host_on)(ide_drive_t *drive);
- int (*ide_dma_host_off)(ide_drive_t *drive);
- int (*ide_dma_verbose)(ide_drive_t *drive);
- int (*ide_dma_lostirq)(ide_drive_t *drive);
- int (*ide_dma_timeout)(ide_drive_t *drive);
-} ide_dma_ops_t;
-
-/*
- * mapping stuff, prepare for highmem...
- *
- * temporarily mapping a (possible) highmem bio for PIO transfer
- */
-#ifndef CONFIG_IDE_TASKFILE_IO
-
-#define ide_rq_offset(rq) \
- (((rq)->hard_cur_sectors - (rq)->current_nr_sectors) << 9)
-
-/*
- * taskfiles really should use hard_cur_sectors as well!
- */
-#define task_rq_offset(rq) \
- (((rq)->nr_sectors - (rq)->current_nr_sectors) * SECTOR_SIZE)
-
-static inline void *ide_map_buffer(struct request *rq, unsigned long *flags)
-{
- /*
- * fs request
- */
- if (rq->bio)
- return bio_kmap_irq(rq->bio, flags) + ide_rq_offset(rq);
-
- /*
- * task request
- */
- return rq->buffer + task_rq_offset(rq);
-}
-
-static inline void ide_unmap_buffer(struct request *rq, char *buffer, unsigned long *flags)
-{
- if (rq->bio)
- bio_kunmap_irq(buffer, flags);
-}
-#endif /* !CONFIG_IDE_TASKFILE_IO */
+#define to_ide_device(dev)container_of(dev, ide_drive_t, gendev)
#define IDE_CHIPSET_PCI_MASK \
((1<<ide_pci)|(1<<ide_cmd646)|(1<<ide_ali14xx))
struct pci_dev *pci_dev; /* for pci chipsets */
struct ide_pci_device_s *cds; /* chipset device struct */
- ide_startstop_t (*rw_disk)(ide_drive_t *, struct request *, sector_t);
+ void (*rw_disk)(ide_drive_t *, struct request *);
#if 0
ide_hwif_ops_t *hwifops;
#else
- /* routine is for HBA specific IDENTITY operations */
- int (*identify)(ide_drive_t *);
/* routine to tune PIO mode for drives */
void (*tuneproc)(ide_drive_t *, u8);
/* routine to retune DMA modes for drives */
// u8 (*ratefilter)(ide_drive_t *, u8);
#endif
-#if 0
- ide_pio_ops_t *pioops;
-#else
void (*ata_input_data)(ide_drive_t *, void *, u32);
void (*ata_output_data)(ide_drive_t *, void *, u32);
void (*atapi_input_bytes)(ide_drive_t *, void *, u32);
void (*atapi_output_bytes)(ide_drive_t *, void *, u32);
-#endif
- int (*ide_dma_read)(ide_drive_t *drive);
- int (*ide_dma_write)(ide_drive_t *drive);
- int (*ide_dma_begin)(ide_drive_t *drive);
+ int (*dma_setup)(ide_drive_t *);
+ void (*dma_exec_cmd)(ide_drive_t *, u8);
+ void (*dma_start)(ide_drive_t *);
int (*ide_dma_end)(ide_drive_t *drive);
int (*ide_dma_check)(ide_drive_t *drive);
int (*ide_dma_on)(ide_drive_t *drive);
int (*ide_dma_off_quietly)(ide_drive_t *drive);
int (*ide_dma_test_irq)(ide_drive_t *drive);
+ void (*ide_dma_clear_irq)(ide_drive_t *drive);
int (*ide_dma_host_on)(ide_drive_t *drive);
int (*ide_dma_host_off)(ide_drive_t *drive);
- int (*ide_dma_verbose)(ide_drive_t *drive);
int (*ide_dma_lostirq)(ide_drive_t *drive);
int (*ide_dma_timeout)(ide_drive_t *drive);
dma_addr_t dmatable_dma;
/* Scatter-gather list used to build the above */
struct scatterlist *sg_table;
+ int sg_max_nents; /* Maximum number of entries in it */
int sg_nents; /* Current number of entries in it */
int sg_dma_direction; /* dma transfer direction */
- int sg_dma_active; /* is it in use */
+
+ /* data phase of the active command (currently only valid for PIO/DMA) */
+ int data_phase;
+
+ unsigned int nsect;
+ unsigned int nleft;
+ unsigned int cursg;
+ unsigned int cursg_ofs;
int mmio; /* hosts iomio (0) or custom (2) select */
int rqsize; /* max sectors per request */
unsigned long dma_status; /* dma status register */
unsigned long dma_vendor3; /* dma vendor 3 register */
unsigned long dma_prdtable; /* actual prd table address */
- unsigned long dma_base2; /* extended base addr for dma ports */
- unsigned dma_extra; /* extra addr for dma ports */
unsigned long config_data; /* for use by chipset-specific code */
unsigned long select_data; /* for use by chipset-specific code */
+ unsigned long extra_base; /* extra addr for dma ports */
+ unsigned extra_ports; /* number of extra dma ports */
+
unsigned noprobe : 1; /* don't probe for this interface */
unsigned present : 1; /* this interface exists */
unsigned hold : 1; /* this interface is always present */
unsigned autodma : 1; /* auto-attempt using DMA at boot */
unsigned udma_four : 1; /* 1=ATA-66 capable, 0=default */
unsigned no_lba48 : 1; /* 1 = cannot do LBA48 */
+ unsigned no_lba48_dma : 1; /* 1 = cannot do LBA48 DMA */
unsigned no_dsc : 1; /* 0 default, 1 dsc_overlap disabled */
unsigned auto_poll : 1; /* supports nop auto-poll */
+ unsigned sg_mapped : 1; /* sg_table and sg_nents are ready */
+ unsigned no_io_32bit : 1; /* 1 = can not do 32-bit IO ops */
+ unsigned err_stops_fifo : 1; /* 1=data FIFO is cleared by an error */
struct device gendev;
- struct semaphore gendev_rel_sem; /* To deal with device release() */
+ struct completion gendev_rel_comp; /* To deal with device release() */
void *hwif_data; /* extra hwif data */
unsigned dma;
-
- void (*led_act)(void *data, int rw);
-} ide_hwif_t;
+} ____cacheline_internodealigned_in_smp ide_hwif_t;
/*
* internal ide interrupt handler type
/* BOOL: protects all fields below */
volatile int busy;
/* BOOL: wake us up on timer expiry */
- int sleeping;
+ unsigned int sleeping : 1;
+ /* BOOL: polling active & poll_timeout field valid */
+ unsigned int polling : 1;
+ /* BOOL: in a polling reset situation. Must not trigger another reset yet */
+ unsigned int resetting : 1;
+
/* current drive */
ide_drive_t *drive;
/* ptr to current hwif in linked-list */
extern struct semaphore ide_setting_sem;
extern int ide_add_setting(ide_drive_t *drive, const char *name, int rw, int read_ioctl, int write_ioctl, int data_type, int min, int max, int mul_factor, int div_factor, void *data, ide_procset_t *set);
-extern void ide_remove_setting(ide_drive_t *drive, char *name);
extern ide_settings_t *ide_find_setting_by_name(ide_drive_t *drive, char *name);
extern int ide_read_setting(ide_drive_t *t, ide_settings_t *setting);
extern int ide_write_setting(ide_drive_t *drive, ide_settings_t *setting, int val);
extern void proc_ide_create(void);
extern void proc_ide_destroy(void);
-extern void destroy_proc_ide_device(ide_hwif_t *, ide_drive_t *);
-extern void destroy_proc_ide_drives(ide_hwif_t *);
extern void create_proc_ide_interfaces(void);
+void destroy_proc_ide_interface(ide_hwif_t *);
extern void ide_add_proc_entries(struct proc_dir_entry *, ide_proc_entry_t *, void *);
extern void ide_remove_proc_entries(struct proc_dir_entry *, ide_proc_entry_t *);
read_proc_t proc_ide_read_capacity;
}
#else
static inline void create_proc_ide_interfaces(void) { ; }
+static inline void destroy_proc_ide_interface(ide_hwif_t *hwif) { ; }
#define PROC_IDE_READ_RETURN(page,start,off,count,eof,len) return 0;
#endif
/*
* Subdrivers support.
+ *
+ * The gendriver.owner field should be set to the module owner of this driver.
+ * The gendriver.name field should be set to the name of this driver
*/
typedef struct ide_driver_s {
- struct module *owner;
- const char *name;
const char *version;
u8 media;
- unsigned busy : 1;
unsigned supports_dsc_overlap : 1;
- int (*cleanup)(ide_drive_t *);
ide_startstop_t (*do_request)(ide_drive_t *, struct request *, sector_t);
int (*end_request)(ide_drive_t *, int, int);
- u8 (*sense)(ide_drive_t *, const char *, u8);
- ide_startstop_t (*error)(ide_drive_t *, const char *, u8);
- ide_startstop_t (*abort)(ide_drive_t *, const char *);
- int (*ioctl)(ide_drive_t *, struct inode *, struct file *, unsigned int, unsigned long);
- void (*pre_reset)(ide_drive_t *);
- sector_t (*capacity)(ide_drive_t *);
- ide_startstop_t (*special)(ide_drive_t *);
+ ide_startstop_t (*error)(ide_drive_t *, struct request *rq, u8, u8);
+ ide_startstop_t (*abort)(ide_drive_t *, struct request *rq);
ide_proc_entry_t *proc;
- int (*attach)(ide_drive_t *);
- void (*ata_prebuilder)(ide_drive_t *);
- void (*atapi_prebuilder)(ide_drive_t *);
- ide_startstop_t (*start_power_step)(ide_drive_t *, struct request *);
- void (*complete_power_step)(ide_drive_t *, struct request *, u8, u8);
struct device_driver gen_driver;
- struct list_head drives;
- struct list_head drivers;
+ int (*probe)(ide_drive_t *);
+ void (*remove)(ide_drive_t *);
+ void (*shutdown)(ide_drive_t *);
} ide_driver_t;
-#define DRIVER(drive) ((drive)->driver)
+#define to_ide_driver(drv) container_of(drv, ide_driver_t, gen_driver)
-extern int generic_ide_ioctl(struct block_device *, unsigned, unsigned long);
+int generic_ide_ioctl(ide_drive_t *, struct file *, struct block_device *, unsigned, unsigned long);
/*
* ide_hwifs[] is the master data structure used to keep track
extern int noautodma;
extern int ide_end_request (ide_drive_t *drive, int uptodate, int nrsecs);
+int ide_end_dequeued_request(ide_drive_t *drive, struct request *rq,
+ int uptodate, int nr_sectors);
/*
* This is used on exit from the driver to designate the next irq handler
*/
extern void ide_execute_command(ide_drive_t *, task_ioreg_t cmd, ide_handler_t *, unsigned int, ide_expiry_t *);
-/*
- * Error reporting, in human readable form (luxurious, but a memory hog).
- *
- * (drive, msg, status)
- */
-byte ide_dump_status (ide_drive_t *drive, const char *msg, byte stat);
+ide_startstop_t __ide_error(ide_drive_t *, struct request *, u8, u8);
/*
* ide_error() takes action based on the error returned by the controller.
*/
ide_startstop_t ide_error (ide_drive_t *drive, const char *msg, byte stat);
+ide_startstop_t __ide_abort(ide_drive_t *, struct request *);
+
/*
* Abort a running command on the controller triggering the abort
* from a host side, non error situation
*/
extern ide_startstop_t ide_abort(ide_drive_t *, const char *);
-/*
- * Issue a simple drive command
- * The drive must be selected beforehand.
- *
- * (drive, command, nsector, handler)
- */
-extern void ide_cmd(ide_drive_t *, u8, u8, ide_handler_t *);
-
extern void ide_fix_driveid(struct hd_driveid *);
/*
* ide_fixstring() cleans up and (optionally) byte-swaps a text string,
*/
extern int ide_wait_stat(ide_startstop_t *, ide_drive_t *, u8, u8, unsigned long);
-/*
- * Return the current idea about the total capacity of this drive.
- */
-extern sector_t current_capacity (ide_drive_t *drive);
-
/*
* Start a reset operation for an IDE interface.
* The caller should return immediately after invoking this.
*/
extern void ide_init_drive_cmd (struct request *rq);
+/*
+ * this function returns error location sector offset in case of a write error
+ */
+extern u64 ide_get_error_location(ide_drive_t *, char *);
+
/*
* "action" parameter type for ide_do_drive_cmd() below.
*/
typedef enum {
ide_wait, /* insert rq at end of list, and wait for it */
- ide_next, /* insert rq immediately after current request */
ide_preempt, /* insert rq in front of current request */
ide_head_wait, /* insert rq in front of current request and wait for it */
ide_end /* insert rq at end of list, but don't wait for it */
} ide_action_t;
-/*
- * This function issues a special IDE device request
- * onto the request queue.
- *
- * If action is ide_wait, then the rq is queued at the end of the
- * request queue, and the function sleeps until it has been processed.
- * This is for use when invoked from an ioctl handler.
- *
- * If action is ide_preempt, then the rq is queued at the head of
- * the request queue, displacing the currently-being-processed
- * request and this function returns immediately without waiting
- * for the new rq to be completed. This is VERY DANGEROUS, and is
- * intended for careful use by the ATAPI tape/cdrom driver code.
- *
- * If action is ide_next, then the rq is queued immediately after
- * the currently-being-processed-request (if any), and the function
- * returns without waiting for the new rq to be completed. As above,
- * This is VERY DANGEROUS, and is intended for careful use by the
- * ATAPI tape/cdrom driver code.
- *
- * If action is ide_end, then the rq is queued at the end of the
- * request queue, and the function returns immediately without waiting
- * for the new rq to be completed. This is again intended for careful
- * use by the ATAPI tape/cdrom driver code.
- */
extern int ide_do_drive_cmd(ide_drive_t *, struct request *, ide_action_t);
/*
*/
extern int ide_wait_cmd(ide_drive_t *, u8, u8, u8, u8, u8 *);
-/* (ide_drive_t *drive, u8 *buf) */
-extern int ide_wait_cmd_task(ide_drive_t *, u8 *);
-
typedef struct ide_task_s {
/*
* struct hd_drive_task_hdr tf;
void *special; /* valid_t generally */
} ide_task_t;
-typedef struct pkt_task_s {
-/*
- * struct hd_drive_task_hdr pktf;
- * task_struct_t pktf;
- * u8 pkcdb[12];
- */
- task_ioreg_t tfRegister[8];
- int data_phase;
- int command_type;
- ide_handler_t *handler;
- struct request *rq; /* copy of request */
- void *special;
-} pkt_task_t;
-
extern u32 ide_read_24(ide_drive_t *);
extern void SELECT_DRIVE(ide_drive_t *);
extern void SELECT_MASK(ide_drive_t *, int);
extern void QUIRK_LIST(ide_drive_t *);
-extern void ata_input_data(ide_drive_t *, void *, u32);
-extern void ata_output_data(ide_drive_t *, void *, u32);
-extern void atapi_input_bytes(ide_drive_t *, void *, u32);
-extern void atapi_output_bytes(ide_drive_t *, void *, u32);
-extern void taskfile_input_data(ide_drive_t *, void *, u32);
-extern void taskfile_output_data(ide_drive_t *, void *, u32);
-
-#ifdef CONFIG_IDE_TASKFILE_IO
-
-#define IDE_PIO_IN 0
-#define IDE_PIO_OUT 1
-
-static inline void task_sectors(ide_drive_t *drive, struct request *rq,
- unsigned nsect, int rw)
-{
- unsigned long flags;
- unsigned int bio_rq;
- char *buf;
-
- /*
- * bio_rq flag is needed because we can call
- * rq_unmap_buffer() with rq->cbio == NULL
- */
- bio_rq = rq->cbio ? 1 : 0;
-
- if (bio_rq)
- buf = rq_map_buffer(rq, &flags); /* fs request */
- else
- buf = rq->buffer + blk_rq_offset(rq); /* task request */
-
- /*
- * IRQ can happen instantly after reading/writing
- * last sector of the datablock.
- */
- process_that_request_first(rq, nsect);
-
- if (rw == IDE_PIO_OUT)
- taskfile_output_data(drive, buf, nsect * SECTOR_WORDS);
- else
- taskfile_input_data(drive, buf, nsect * SECTOR_WORDS);
-
- if (bio_rq)
- rq_unmap_buffer(buf, &flags);
-}
-#endif /* CONFIG_IDE_TASKFILE_IO */
-
extern int drive_is_ready(ide_drive_t *);
extern int wait_for_ready(ide_drive_t *, int /* timeout */);
extern ide_startstop_t recal_intr(ide_drive_t *);
extern ide_startstop_t task_no_data_intr(ide_drive_t *);
extern ide_startstop_t task_in_intr(ide_drive_t *);
-extern ide_startstop_t task_mulin_intr(ide_drive_t *);
extern ide_startstop_t pre_task_out_intr(ide_drive_t *, struct request *);
-extern ide_startstop_t task_out_intr(ide_drive_t *);
-extern ide_startstop_t pre_task_mulout_intr(ide_drive_t *, struct request *);
-extern ide_startstop_t task_mulout_intr(ide_drive_t *);
extern int ide_raw_taskfile(ide_drive_t *, ide_task_t *, u8 *);
extern int system_bus_clock(void);
-extern u8 ide_auto_reduce_xfer(ide_drive_t *);
extern int ide_driveid_update(ide_drive_t *);
extern int ide_ata66_check(ide_drive_t *, ide_task_t *);
extern int ide_config_drive_speed(ide_drive_t *, u8);
extern int taskfile_lib_get_identify(ide_drive_t *drive, u8 *);
extern int ide_wait_not_busy(ide_hwif_t *hwif, unsigned long timeout);
-ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq, sector_t block);
-
-/*
- * ide_system_bus_speed() returns what we think is the system VESA/PCI
- * bus speed (in MHz). This is used for calculating interface PIO timings.
- * The default is 40 for known PCI systems, 50 otherwise.
- * The "idebus=xx" parameter can be used to override this value.
- */
-extern int ide_system_bus_speed(void);
/*
* ide_stall_queue() can be used by a drive to give excess bandwidth back
extern int ide_spin_wait_hwgroup(ide_drive_t *);
extern void ide_timer_expiry(unsigned long);
-extern irqreturn_t ide_intr(int irq, void *dev_id, struct pt_regs *regs);
+extern irqreturn_t ide_intr(int irq, void *dev_id);
extern void do_ide_request(request_queue_t *);
-extern void ide_init_subdrivers(void);
-
-extern struct block_device_operations ide_fops[];
-extern ide_proc_entry_t generic_subdriver_entries[];
-extern int ata_attach(ide_drive_t *);
+void ide_init_disk(struct gendisk *, ide_drive_t *);
extern int ideprobe_init(void);
extern void ide_scan_pcibus(int scan_direction) __init;
-extern int ide_pci_register_driver(struct pci_driver *driver);
-extern void ide_pci_unregister_driver(struct pci_driver *driver);
-extern void ide_pci_setup_ports(struct pci_dev *dev, struct ide_pci_device_s *d, int autodma, int pciirq, ata_index_t *index);
+extern int __ide_pci_register_driver(struct pci_driver *driver, struct module *owner);
+#define ide_pci_register_driver(d) __ide_pci_register_driver(d, THIS_MODULE)
+void ide_pci_setup_ports(struct pci_dev *, struct ide_pci_device_s *, int, ata_index_t *);
extern void ide_setup_pci_noise (struct pci_dev *dev, struct ide_pci_device_s *d);
extern void default_hwif_iops(ide_hwif_t *);
extern void default_hwif_mmiops(ide_hwif_t *);
extern void default_hwif_transport(ide_hwif_t *);
-int ide_register_driver(ide_driver_t *driver);
-void ide_unregister_driver(ide_driver_t *driver);
-int ide_register_subdriver(ide_drive_t *, ide_driver_t *);
-int ide_unregister_subdriver (ide_drive_t *drive);
-int ide_replace_subdriver(ide_drive_t *drive, const char *driver);
+void ide_register_subdriver(ide_drive_t *, ide_driver_t *);
+void ide_unregister_subdriver(ide_drive_t *, ide_driver_t *);
#define ON_BOARD 1
#define NEVER_BOARD 0
u8 val; /* value of masked reg when "enabled" */
} ide_pci_enablebit_t;
+enum {
+ /* Uses ISA control ports not PCI ones. */
+ IDEPCI_FLAG_ISA_PORTS = (1 << 0),
+};
+
typedef struct ide_pci_device_s {
- u16 vendor;
- u16 device;
char *name;
- void (*init_setup)(struct pci_dev *, struct ide_pci_device_s *);
+ int (*init_setup)(struct pci_dev *, struct ide_pci_device_s *);
void (*init_setup_dma)(struct pci_dev *, struct ide_pci_device_s *, ide_hwif_t *);
unsigned int (*init_chipset)(struct pci_dev *, const char *);
void (*init_iops)(ide_hwif_t *);
void (*init_hwif)(ide_hwif_t *);
void (*init_dma)(ide_hwif_t *, unsigned long);
+ void (*fixup)(ide_hwif_t *);
u8 channels;
u8 autodma;
ide_pci_enablebit_t enablebits[2];
u8 bootable;
unsigned int extra;
struct ide_pci_device_s *next;
- u8 isa_ports; /* Uses ISA control ports not PCI ones */
+ u8 flags;
} ide_pci_device_t;
-extern void ide_setup_pci_device(struct pci_dev *, ide_pci_device_t *);
-extern void ide_setup_pci_devices(struct pci_dev *, struct pci_dev *, ide_pci_device_t *);
+extern int ide_setup_pci_device(struct pci_dev *, ide_pci_device_t *);
+extern int ide_setup_pci_devices(struct pci_dev *, struct pci_dev *, ide_pci_device_t *);
+
+void ide_map_sg(ide_drive_t *, struct request *);
+void ide_init_sg_cmd(ide_drive_t *, struct request *);
#define BAD_DMA_DRIVE 0
#define GOOD_DMA_DRIVE 1
#ifdef CONFIG_BLK_DEV_IDEDMA
+struct drive_list_entry {
+ const char *id_model;
+ const char *id_firmware;
+};
+
+int ide_in_drive_list(struct hd_driveid *, const struct drive_list_entry *);
int __ide_dma_bad_drive(ide_drive_t *);
int __ide_dma_good_drive(ide_drive_t *);
+int ide_use_dma(ide_drive_t *);
int __ide_dma_off(ide_drive_t *);
+void ide_dma_verbose(ide_drive_t *);
+ide_startstop_t ide_dma_intr(ide_drive_t *);
#ifdef CONFIG_BLK_DEV_IDEDMA_PCI
extern int ide_build_sglist(ide_drive_t *, struct request *);
-extern int ide_raw_build_sglist(ide_drive_t *, struct request *);
extern int ide_build_dmatable(ide_drive_t *, struct request *);
extern void ide_destroy_dmatable(ide_drive_t *);
-extern ide_startstop_t ide_dma_intr(ide_drive_t *);
extern int ide_release_dma(ide_hwif_t *);
extern void ide_setup_dma(ide_hwif_t *, unsigned long, unsigned int);
-extern int ide_start_dma(ide_hwif_t *, ide_drive_t *, int);
extern int __ide_dma_host_off(ide_drive_t *);
extern int __ide_dma_off_quietly(ide_drive_t *);
extern int __ide_dma_host_on(ide_drive_t *);
extern int __ide_dma_on(ide_drive_t *);
extern int __ide_dma_check(ide_drive_t *);
-extern int __ide_dma_read(ide_drive_t *);
-extern int __ide_dma_write(ide_drive_t *);
-extern int __ide_dma_begin(ide_drive_t *);
+extern int ide_dma_setup(ide_drive_t *);
+extern void ide_dma_start(ide_drive_t *);
extern int __ide_dma_end(ide_drive_t *);
-extern int __ide_dma_test_irq(ide_drive_t *);
-extern int __ide_dma_verbose(ide_drive_t *);
extern int __ide_dma_lostirq(ide_drive_t *);
extern int __ide_dma_timeout(ide_drive_t *);
#endif /* CONFIG_BLK_DEV_IDEDMA_PCI */
-#ifdef CONFIG_BLK_DEV_IDE_TCQ
-extern int __ide_dma_queued_on(ide_drive_t *drive);
-extern int __ide_dma_queued_off(ide_drive_t *drive);
-extern ide_startstop_t __ide_dma_queued_read(ide_drive_t *drive);
-extern ide_startstop_t __ide_dma_queued_write(ide_drive_t *drive);
-extern ide_startstop_t __ide_dma_queued_start(ide_drive_t *drive);
-#endif
-
#else
+static inline int ide_use_dma(ide_drive_t *drive) { return 0; }
static inline int __ide_dma_off(ide_drive_t *drive) { return 0; }
+static inline void ide_dma_verbose(ide_drive_t *drive) { ; }
#endif /* CONFIG_BLK_DEV_IDEDMA */
#ifndef CONFIG_BLK_DEV_IDEDMA_PCI
extern void ide_hwif_release_regions(ide_hwif_t* hwif);
extern void ide_unregister (unsigned int index);
+void ide_register_region(struct gendisk *);
+void ide_unregister_region(struct gendisk *);
+
+void ide_undecoded_slave(ide_hwif_t *);
+
+int probe_hwif_init_with_fixup(ide_hwif_t *, void (*)(ide_hwif_t *));
extern int probe_hwif_init(ide_hwif_t *);
static inline void *ide_get_hwifdata (ide_hwif_t * hwif)
extern char *ide_xfer_verbose(u8 xfer_rate);
extern void ide_toggle_bounce(ide_drive_t *drive, int on);
extern int ide_set_xfer_rate(ide_drive_t *drive, u8 rate);
-extern byte ide_dump_atapi_status(ide_drive_t *drive, const char *msg, byte stat);
+
+u8 ide_dump_status(ide_drive_t *, const char *, u8);
typedef struct ide_pio_timings_s {
int setup_time; /* Address setup (ns) minimum */
* ide_drive_t->hwif: constant, no locking
*/
-#define local_irq_set(flags) do { local_save_flags((flags)); local_irq_enable(); } while (0)
+#define local_irq_set(flags) do { local_save_flags((flags)); local_irq_enable_in_hardirq(); } while (0)
-#define IDE_MAX_TAG 32
-#ifdef CONFIG_BLK_DEV_IDE_TCQ
-static inline int ata_pending_commands(ide_drive_t *drive)
-{
- if (drive->using_tcq)
- return blk_queue_tag_depth(drive->queue);
+extern struct bus_type ide_bus_type;
- return 0;
-}
+/* check if CACHE FLUSH (EXT) command is supported (bits defined in ATA-6) */
+#define ide_id_has_flush_cache(id) ((id)->cfs_enable_2 & 0x3000)
-static inline int ata_can_queue(ide_drive_t *drive)
-{
- if (drive->using_tcq)
- return blk_queue_tag_queue(drive->queue);
+/* some Maxtor disks have bit 13 defined incorrectly so check bit 10 too */
+#define ide_id_has_flush_cache_ext(id) \
+ (((id)->cfs_enable_2 & 0x2400) == 0x2400)
- return 1;
+static inline int hwif_to_node(ide_hwif_t *hwif)
+{
+ struct pci_dev *dev = hwif->pci_dev;
+ return dev ? pcibus_to_node(dev->bus) : -1;
}
-#else
-#define ata_pending_commands(drive) (0)
-#define ata_can_queue(drive) (1)
-#endif
-
-extern struct bus_type ide_bus_type;
#endif /* _IDE_H */