* Version: @(#)if.h 1.0.2 04/18/93
*
* Authors: Original taken from Berkeley UNIX 4.3, (c) UCB 1982-1988
- * Ross Biro, <bir7@leland.Stanford.Edu>
+ * Ross Biro
* Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
*
* This program is free software; you can redistribute it and/or
#define IFF_LOOPBACK 0x8 /* is a loopback net */
#define IFF_POINTOPOINT 0x10 /* interface is has p-p link */
#define IFF_NOTRAILERS 0x20 /* avoid use of trailers */
-#define IFF_RUNNING 0x40 /* resources allocated */
+#define IFF_RUNNING 0x40 /* interface RFC2863 OPER_UP */
#define IFF_NOARP 0x80 /* no ARP protocol */
#define IFF_PROMISC 0x100 /* receive all packets */
#define IFF_ALLMULTI 0x200 /* receive all multicast packets*/
#define IFF_MULTICAST 0x1000 /* Supports multicast */
-#define IFF_VOLATILE (IFF_LOOPBACK|IFF_POINTOPOINT|IFF_BROADCAST|IFF_MASTER|IFF_SLAVE|IFF_RUNNING)
-
#define IFF_PORTSEL 0x2000 /* can set media type */
#define IFF_AUTOMEDIA 0x4000 /* auto media select active */
#define IFF_DYNAMIC 0x8000 /* dialup device with changing addresses*/
+#define IFF_LOWER_UP 0x10000 /* driver signals L1 up */
+#define IFF_DORMANT 0x20000 /* driver signals dormant */
+
+#define IFF_VOLATILE (IFF_LOOPBACK|IFF_POINTOPOINT|IFF_BROADCAST|\
+ IFF_MASTER|IFF_SLAVE|IFF_RUNNING|IFF_LOWER_UP|IFF_DORMANT)
+
/* Private (from user) interface flags (netdevice->priv_flags). */
#define IFF_802_1Q_VLAN 0x1 /* 802.1Q VLAN device. */
#define IFF_EBRIDGE 0x2 /* Ethernet bridging device. */
+#define IFF_SLAVE_INACTIVE 0x4 /* bonding slave not the curr. active */
+#define IFF_MASTER_8023AD 0x8 /* bonding master, 802.3ad. */
+#define IFF_MASTER_ALB 0x10 /* bonding master, balance-alb. */
+#define IFF_BONDING 0x20 /* bonding master or slave */
+#define IFF_SLAVE_NEEDARP 0x40 /* need ARPs for validation */
#define IF_GET_IFACE 0x0001 /* for querying only */
#define IF_GET_PROTO 0x0002
#define IF_IFACE_T1 0x1003 /* T1 telco serial interface */
#define IF_IFACE_E1 0x1004 /* E1 telco serial interface */
#define IF_IFACE_SYNC_SERIAL 0x1005 /* can't be set by software */
+#define IF_IFACE_X21D 0x1006 /* X.21 Dual Clocking (FarSite) */
/* For definitions see hdlc.h */
#define IF_PROTO_HDLC 0x2000 /* raw HDLC protocol */
#define IF_PROTO_FR_DEL_ETH_PVC 0x2009 /* Delete FR Ethernet-bridged PVC */
#define IF_PROTO_FR_PVC 0x200A /* for reading PVC status */
#define IF_PROTO_FR_ETH_PVC 0x200B
+#define IF_PROTO_RAW 0x200C /* RAW Socket */
+
+/* RFC 2863 operational status */
+enum {
+ IF_OPER_UNKNOWN,
+ IF_OPER_NOTPRESENT,
+ IF_OPER_DOWN,
+ IF_OPER_LOWERLAYERDOWN,
+ IF_OPER_TESTING,
+ IF_OPER_DORMANT,
+ IF_OPER_UP,
+};
+/* link modes */
+enum {
+ IF_LINK_MODE_DEFAULT,
+ IF_LINK_MODE_DORMANT, /* limit upward transition to dormant */
+};
/*
* Device mapping structure. I'd just gone off and designed a
unsigned int size; /* Size of the data allocated by the caller */
union {
/* {atm/eth/dsl}_settings anyone ? */
- raw_hdlc_proto *raw_hdlc;
- cisco_proto *cisco;
- fr_proto *fr;
- fr_proto_pvc *fr_pvc;
- fr_proto_pvc_info *fr_pvc_info;
+ raw_hdlc_proto __user *raw_hdlc;
+ cisco_proto __user *cisco;
+ fr_proto __user *fr;
+ fr_proto_pvc __user *fr_pvc;
+ fr_proto_pvc_info __user *fr_pvc_info;
/* interface settings */
- sync_serial_settings *sync;
- te1_settings *te1;
+ sync_serial_settings __user *sync;
+ te1_settings __user *te1;
} ifs_ifsu;
};
struct ifmap ifru_map;
char ifru_slave[IFNAMSIZ]; /* Just fits the size */
char ifru_newname[IFNAMSIZ];
- char __user * ifru_data;
+ void __user * ifru_data;
struct if_settings ifru_settings;
} ifr_ifru;
};
int ifc_len; /* size of buffer */
union
{
- char * ifcu_buf;
- struct ifreq *ifcu_req;
+ char __user *ifcu_buf;
+ struct ifreq __user *ifcu_req;
} ifc_ifcu;
};
#define ifc_buf ifc_ifcu.ifcu_buf /* buffer address */
#define ifc_req ifc_ifcu.ifcu_req /* array of structures */
-
#endif /* _LINUX_IF_H */