#include <linux/workqueue.h>
#include <scsi/scsi_host.h>
+/*
+ * Define if arch has non-standard setup. This is a _PCI_ standard
+ * not a legacy or ISA standard.
+ */
+#ifdef CONFIG_ATA_NONSTANDARD
+#include <asm/libata-portmap.h>
+#else
+#include <asm-generic/libata-portmap.h>
+#endif
+
/*
* compile-time options: to be removed as soon as all the drivers are
* converted to the new debugging mechanism
#undef ATA_VERBOSE_DEBUG /* yet more debugging output */
#undef ATA_IRQ_TRAP /* define to ack screaming irqs */
#undef ATA_NDEBUG /* define to disable quick runtime checks */
-#undef ATA_ENABLE_PATA /* define to enable PATA support in some
+#define ATA_ENABLE_PATA /* define to enable PATA support in some
* low-level drivers */
#define ATA_TAG_POISON 0xfafbfcfdU
/* move to PCI layer? */
+#define PCI_VDEVICE(vendor, device) \
+ PCI_VENDOR_ID_##vendor, (device), \
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0
+
static inline struct device *pci_dev_to_dev(struct pci_dev *pdev)
{
return &pdev->dev;
/* tag ATA_MAX_QUEUE - 1 is reserved for internal commands */
ATA_MAX_QUEUE = 32,
ATA_TAG_INTERNAL = ATA_MAX_QUEUE - 1,
- ATA_MAX_SECTORS = 200, /* FIXME */
- ATA_MAX_SECTORS_LBA48 = 65535,
ATA_MAX_BUS = 2,
ATA_DEF_BUSY_WAIT = 10000,
ATA_SHORT_PAUSE = (HZ >> 6) + 1,
ATA_DFLAG_LBA48 = (1 << 1), /* device supports LBA48 */
ATA_DFLAG_CDB_INTR = (1 << 2), /* device asserts INTRQ when ready for CDB */
ATA_DFLAG_NCQ = (1 << 3), /* device supports NCQ */
+ ATA_DFLAG_FLUSH_EXT = (1 << 4), /* do FLUSH_EXT instead of FLUSH */
ATA_DFLAG_CFG_MASK = (1 << 8) - 1,
- ATA_DFLAG_PIO = (1 << 8), /* device currently in PIO mode */
- ATA_DFLAG_SUSPENDED = (1 << 9), /* device suspended */
+ ATA_DFLAG_PIO = (1 << 8), /* device limited to PIO mode */
+ ATA_DFLAG_NCQ_OFF = (1 << 9), /* device limited to non-NCQ mode */
+ ATA_DFLAG_SUSPENDED = (1 << 10), /* device suspended */
ATA_DFLAG_INIT_MASK = (1 << 16) - 1,
ATA_DFLAG_DETACH = (1 << 16),
ATA_FLAG_SKIP_D2H_BSY = (1 << 12), /* can't wait for the first D2H
* Register FIS clearing BSY */
ATA_FLAG_DEBUGMSG = (1 << 13),
+ ATA_FLAG_SETXFER_POLLING= (1 << 14), /* use polling for SETXFER */
+ ATA_FLAG_IGN_SIMPLEX = (1 << 15), /* ignore SIMPLEX */
/* The following flag belongs to ap->pflags but is kept in
* ap->flags because it's referenced in many LLDs and will be
ATA_QCFLAG_EH_SCHEDULED = (1 << 18), /* EH scheduled (obsolete) */
/* host set flags */
- ATA_HOST_SIMPLEX = (1 << 0), /* Host is simplex, one DMA channel per host_set only */
-
+ ATA_HOST_SIMPLEX = (1 << 0), /* Host is simplex, one DMA channel per host only */
+
/* various lengths of time */
ATA_TMOUT_BOOT = 30 * HZ, /* heuristic */
ATA_TMOUT_BOOT_QUICK = 7 * HZ, /* heuristic */
/* encoding various smaller bitmaps into a single
* unsigned int bitmap
*/
- ATA_BITS_PIO = 5,
- ATA_BITS_MWDMA = 3,
+ ATA_BITS_PIO = 7,
+ ATA_BITS_MWDMA = 5,
ATA_BITS_UDMA = 8,
ATA_SHIFT_PIO = 0,
ATA_EHI_QUIET = (1 << 3), /* be quiet */
ATA_EHI_DID_RESET = (1 << 16), /* already reset this port */
+ ATA_EHI_PRINTINFO = (1 << 17), /* print configuration info */
+ ATA_EHI_SETMODE = (1 << 18), /* configure transfer mode */
+ ATA_EHI_POST_SETMODE = (1 << 19), /* revaildating after setmode */
ATA_EHI_RESET_MODIFIER_MASK = ATA_EHI_RESUME_LINK,
* most devices.
*/
ATA_SPINUP_WAIT = 8000,
+
+ /* Horkage types. May be set by libata or controller on drives
+ (some horkage may be drive/controller pair dependant */
+
+ ATA_HORKAGE_DIAGNOSTIC = (1 << 0), /* Failed boot diag */
+ ATA_HORKAGE_NODMA = (1 << 1), /* DMA problems */
+ ATA_HORKAGE_NONCQ = (1 << 2), /* Don't use NCQ */
};
enum hsm_task_states {
- HSM_ST_UNKNOWN, /* state unknown */
HSM_ST_IDLE, /* no command on going */
HSM_ST, /* (waiting the device to) transfer data */
HSM_ST_LAST, /* (waiting the device to) complete command */
AC_ERR_SYSTEM = (1 << 6), /* system error */
AC_ERR_INVALID = (1 << 7), /* invalid argument */
AC_ERR_OTHER = (1 << 8), /* unknown */
+ AC_ERR_NODEV_HINT = (1 << 9), /* polling device detection hint */
};
/* forward declarations */
struct scsi_host_template *sht;
struct ata_ioports port[ATA_MAX_PORTS];
unsigned int n_ports;
- unsigned int hard_port_no;
+ unsigned int dummy_port_mask;
unsigned int pio_mask;
unsigned int mwdma_mask;
unsigned int udma_mask;
- unsigned int legacy_mode;
unsigned long irq;
+ unsigned long irq2;
unsigned int irq_flags;
- unsigned long host_flags;
- unsigned long port_flags[ATA_MAX_PORTS]; /* pata fix */
- unsigned long host_set_flags;
+ unsigned long port_flags;
+ unsigned long _host_flags;
void __iomem *mmio_base;
void *private_data;
+
+ /* port_info for the secondary port. Together with irq2, it's
+ * used to implement non-uniform secondary port. Currently,
+ * the only user is ata_piix combined mode. This workaround
+ * will be removed together with ata_probe_ent when init model
+ * is updated.
+ */
+ const struct ata_port_info *pinfo2;
};
-struct ata_host_set {
+struct ata_host {
spinlock_t lock;
struct device *dev;
unsigned long irq;
+ unsigned long irq2;
void __iomem *mmio_base;
unsigned int n_ports;
void *private_data;
unsigned long flags;
int simplex_claimed; /* Keep seperate in case we
ever need to do this locked */
- struct ata_host_set *next; /* for legacy mode */
struct ata_port *ports[0];
};
void *private_data;
};
-struct ata_host_stats {
+struct ata_port_stats {
unsigned long unhandled_irq;
unsigned long idle_irq;
unsigned long rw_reqbuf;
/* error history */
struct ata_ering ering;
+ unsigned int horkage; /* List of broken features */
};
/* Offset into struct ata_device. Fields above it are maintained
};
struct ata_port {
- struct Scsi_Host *host; /* our co-allocated scsi host */
+ struct Scsi_Host *scsi_host; /* our co-allocated scsi host */
const struct ata_port_operations *ops;
spinlock_t *lock;
unsigned long flags; /* ATA_FLAG_xxx */
unsigned int pflags; /* ATA_PFLAG_xxx */
unsigned int id; /* unique id req'd by scsi midlyr */
unsigned int port_no; /* unique port #; from zero */
- unsigned int hard_port_no; /* hardware port #; from zero */
struct ata_prd *prd; /* our SG list */
dma_addr_t prd_dma; /* and its DMA mapping */
unsigned int hw_sata_spd_limit;
unsigned int sata_spd_limit; /* SATA PHY speed limit */
- /* record runtime error info, protected by host_set lock */
+ /* record runtime error info, protected by host lock */
struct ata_eh_info eh_info;
/* EH context owned by EH */
struct ata_eh_context eh_context;
unsigned int active_tag;
u32 sactive;
- struct ata_host_stats stats;
- struct ata_host_set *host_set;
+ struct ata_port_stats stats;
+ struct ata_host *host;
struct device *dev;
- struct work_struct port_task;
- struct work_struct hotplug_task;
+ void *port_task_data;
+ struct delayed_work port_task;
+ struct delayed_work hotplug_task;
struct work_struct scsi_rescan_task;
unsigned int hsm_task_state;
void (*dev_select)(struct ata_port *ap, unsigned int device);
void (*phy_reset) (struct ata_port *ap); /* obsolete */
- void (*set_mode) (struct ata_port *ap);
+ int (*set_mode) (struct ata_port *ap, struct ata_device **r_failed_dev);
void (*post_set_mode) (struct ata_port *ap);
- int (*check_atapi_dma) (struct ata_queued_cmd *qc);
+ int (*check_atapi_dma) (struct ata_queued_cmd *qc);
void (*bmdma_setup) (struct ata_queued_cmd *qc);
void (*bmdma_start) (struct ata_queued_cmd *qc);
void (*error_handler) (struct ata_port *ap);
void (*post_internal_cmd) (struct ata_queued_cmd *qc);
- irqreturn_t (*irq_handler)(int, void *, struct pt_regs *);
+ irq_handler_t irq_handler;
void (*irq_clear) (struct ata_port *);
u32 (*scr_read) (struct ata_port *ap, unsigned int sc_reg);
int (*port_start) (struct ata_port *ap);
void (*port_stop) (struct ata_port *ap);
- void (*host_stop) (struct ata_host_set *host_set);
+ void (*host_stop) (struct ata_host *host);
void (*bmdma_stop) (struct ata_queued_cmd *qc);
u8 (*bmdma_status) (struct ata_port *ap);
struct ata_port_info {
struct scsi_host_template *sht;
- unsigned long host_flags;
+ unsigned long flags;
unsigned long pio_mask;
unsigned long mwdma_mask;
unsigned long udma_mask;
extern const unsigned long sata_deb_timing_hotplug[];
extern const unsigned long sata_deb_timing_long[];
+extern const struct ata_port_operations ata_dummy_port_ops;
+
static inline const unsigned long *
sata_ehc_deb_timing(struct ata_eh_context *ehc)
{
return sata_deb_timing_normal;
}
+static inline int ata_port_is_dummy(struct ata_port *ap)
+{
+ return ap->ops == &ata_dummy_port_ops;
+}
+
extern void ata_port_probe(struct ata_port *);
extern void __sata_phy_reset(struct ata_port *ap);
extern void sata_phy_reset(struct ata_port *ap);
extern int sata_phy_resume(struct ata_port *ap, const unsigned long *param);
extern int ata_std_prereset(struct ata_port *ap);
extern int ata_std_softreset(struct ata_port *ap, unsigned int *classes);
+extern int sata_port_hardreset(struct ata_port *ap,
+ const unsigned long *timing);
extern int sata_std_hardreset(struct ata_port *ap, unsigned int *class);
extern void ata_std_postreset(struct ata_port *ap, unsigned int *classes);
-extern int ata_dev_revalidate(struct ata_device *dev, int post_reset);
extern void ata_port_disable(struct ata_port *);
extern void ata_std_ports(struct ata_ioports *ioaddr);
#ifdef CONFIG_PCI
extern int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info,
unsigned int n_ports);
extern void ata_pci_remove_one (struct pci_dev *pdev);
-extern void ata_pci_device_do_suspend(struct pci_dev *pdev, pm_message_t state);
+extern void ata_pci_device_do_suspend(struct pci_dev *pdev, pm_message_t mesg);
extern void ata_pci_device_do_resume(struct pci_dev *pdev);
-extern int ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t state);
+extern int ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg);
extern int ata_pci_device_resume(struct pci_dev *pdev);
extern int ata_pci_clear_simplex(struct pci_dev *pdev);
#endif /* CONFIG_PCI */
extern int ata_device_add(const struct ata_probe_ent *ent);
extern void ata_port_detach(struct ata_port *ap);
-extern void ata_host_set_remove(struct ata_host_set *host_set);
+extern void ata_host_init(struct ata_host *, struct device *,
+ unsigned long, const struct ata_port_operations *);
+extern void ata_host_remove(struct ata_host *host);
extern int ata_scsi_detect(struct scsi_host_template *sht);
extern int ata_scsi_ioctl(struct scsi_device *dev, int cmd, void __user *arg);
extern int ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *));
extern int ata_scsi_release(struct Scsi_Host *host);
+extern void ata_sas_port_destroy(struct ata_port *);
+extern struct ata_port *ata_sas_port_alloc(struct ata_host *,
+ struct ata_port_info *, struct Scsi_Host *);
+extern int ata_sas_port_init(struct ata_port *);
+extern int ata_sas_port_start(struct ata_port *ap);
+extern void ata_sas_port_stop(struct ata_port *ap);
+extern int ata_sas_slave_configure(struct scsi_device *, struct ata_port *);
+extern int ata_sas_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *),
+ struct ata_port *ap);
extern unsigned int ata_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc);
extern int sata_scr_valid(struct ata_port *ap);
extern int sata_scr_read(struct ata_port *ap, int reg, u32 *val);
extern int ata_port_online(struct ata_port *ap);
extern int ata_port_offline(struct ata_port *ap);
extern int ata_scsi_device_resume(struct scsi_device *);
-extern int ata_scsi_device_suspend(struct scsi_device *, pm_message_t state);
-extern int ata_host_set_suspend(struct ata_host_set *host_set,
- pm_message_t mesg);
-extern void ata_host_set_resume(struct ata_host_set *host_set);
+extern int ata_scsi_device_suspend(struct scsi_device *, pm_message_t mesg);
+extern int ata_host_suspend(struct ata_host *host, pm_message_t mesg);
+extern void ata_host_resume(struct ata_host *host);
extern int ata_ratelimit(void);
-extern unsigned int ata_busy_sleep(struct ata_port *ap,
- unsigned long timeout_pat,
- unsigned long timeout);
-extern void ata_port_queue_task(struct ata_port *ap, void (*fn)(void *),
+extern int ata_busy_sleep(struct ata_port *ap,
+ unsigned long timeout_pat, unsigned long timeout);
+extern void ata_port_queue_task(struct ata_port *ap, work_func_t fn,
void *data, unsigned long delay);
extern u32 ata_wait_register(void __iomem *reg, u32 mask, u32 val,
unsigned long interval_msec,
extern void ata_exec_command(struct ata_port *ap, const struct ata_taskfile *tf);
extern int ata_port_start (struct ata_port *ap);
extern void ata_port_stop (struct ata_port *ap);
-extern void ata_host_stop (struct ata_host_set *host_set);
-extern irqreturn_t ata_interrupt (int irq, void *dev_instance, struct pt_regs *regs);
+extern void ata_host_stop (struct ata_host *host);
+extern irqreturn_t ata_interrupt (int irq, void *dev_instance);
extern void ata_mmio_data_xfer(struct ata_device *adev, unsigned char *buf,
unsigned int buflen, int write_data);
extern void ata_pio_data_xfer(struct ata_device *adev, unsigned char *buf,
unsigned int ofs, unsigned int len);
extern void ata_id_c_string(const u16 *id, unsigned char *s,
unsigned int ofs, unsigned int len);
+extern unsigned long ata_device_blacklisted(const struct ata_device *dev);
extern void ata_bmdma_setup (struct ata_queued_cmd *qc);
extern void ata_bmdma_start (struct ata_queued_cmd *qc);
extern void ata_bmdma_stop(struct ata_queued_cmd *qc);
unsigned long val;
};
-extern void ata_pci_host_stop (struct ata_host_set *host_set);
+extern void ata_pci_host_stop (struct ata_host *host);
extern struct ata_probe_ent *
ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port, int portmask);
extern int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bits);
/**
* ata_busy_wait - Wait for a port status register
* @ap: Port to wait for.
+ * @bits: bits that must be clear
+ * @max: number of 10uS waits to perform
*
* Waits up to max*10 microseconds for the selected bits in the port's
* status register to be cleared.
udelay(10);
status = ata_chk_status(ap);
max--;
- } while ((status & bits) && (max > 0));
+ } while (status != 0xff && (status & bits) && (max > 0));
return status;
}
{
u8 status = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000);
- if (status & (ATA_BUSY | ATA_DRQ)) {
+ if (status != 0xff && (status & (ATA_BUSY | ATA_DRQ))) {
unsigned long l = ap->ioaddr.status_addr;
if (ata_msg_warn(ap))
printk(KERN_WARNING "ATA: abnormal status 0x%X on port 0x%lX\n",
static inline void ata_qc_reinit(struct ata_queued_cmd *qc)
{
+ qc->dma_dir = DMA_NONE;
qc->__sg = NULL;
qc->flags = 0;
qc->cursect = qc->cursg = qc->cursg_ofs = 0;
qc->nsect = 0;
qc->nbytes = qc->curbytes = 0;
+ qc->n_elem = 0;
qc->err_mask = 0;
+ qc->pad_len = 0;
ata_tf_init(qc->dev, &qc->tf);
qc->result_tf.feature = 0;
}
-/**
- * ata_irq_on - Enable interrupts on a port.
- * @ap: Port on which interrupts are enabled.
- *
- * Enable interrupts on a legacy IDE device using MMIO or PIO,
- * wait for idle, clear any pending interrupts.
- *
- * LOCKING:
- * Inherited from caller.
- */
-
-static inline u8 ata_irq_on(struct ata_port *ap)
-{
- struct ata_ioports *ioaddr = &ap->ioaddr;
- u8 tmp;
-
- ap->ctl &= ~ATA_NIEN;
- ap->last_ctl = ap->ctl;
-
- if (ap->flags & ATA_FLAG_MMIO)
- writeb(ap->ctl, (void __iomem *) ioaddr->ctl_addr);
- else
- outb(ap->ctl, ioaddr->ctl_addr);
- tmp = ata_wait_idle(ap);
-
- ap->ops->irq_clear(ap);
-
- return tmp;
-}
-
-
/**
* ata_irq_ack - Acknowledge a device interrupt.
* @ap: Port on which interrupts are enabled.
git://git.onelab.eu / linux-2.6.git / blobdiff