#ifndef _LINUX_TIME_H
#define _LINUX_TIME_H
-#include <asm/param.h>
#include <linux/types.h>
+#ifdef __KERNEL__
+# include <linux/seqlock.h>
+#endif
+
#ifndef _STRUCT_TIMESPEC
#define _STRUCT_TIMESPEC
struct timespec {
time_t tv_sec; /* seconds */
long tv_nsec; /* nanoseconds */
};
-#endif /* _STRUCT_TIMESPEC */
+#endif
struct timeval {
time_t tv_sec; /* seconds */
#ifdef __KERNEL__
-#include <linux/spinlock.h>
-#include <linux/seqlock.h>
-#include <linux/timex.h>
-#include <asm/div64.h>
-#ifndef div_long_long_rem
-
-#define div_long_long_rem(dividend,divisor,remainder) ({ \
- u64 result = dividend; \
- *remainder = do_div(result,divisor); \
- result; })
-
-#endif
-
-/*
- * Have the 32 bit jiffies value wrap 5 minutes after boot
- * so jiffies wrap bugs show up earlier.
- */
-#define INITIAL_JIFFIES ((unsigned long)(unsigned int) (-300*HZ))
-
-/*
- * Change timeval to jiffies, trying to avoid the
- * most obvious overflows..
- *
- * And some not so obvious.
- *
- * Note that we don't want to return MAX_LONG, because
- * for various timeout reasons we often end up having
- * to wait "jiffies+1" in order to guarantee that we wait
- * at _least_ "jiffies" - so "jiffies+1" had better still
- * be positive.
- */
-#define MAX_JIFFY_OFFSET ((~0UL >> 1)-1)
-
-/* Parameters used to convert the timespec values */
-#ifndef USEC_PER_SEC
-#define USEC_PER_SEC (1000000L)
-#endif
-
-#ifndef NSEC_PER_SEC
-#define NSEC_PER_SEC (1000000000L)
-#endif
-
-#ifndef NSEC_PER_USEC
-#define NSEC_PER_USEC (1000L)
-#endif
-
-/*
- * We want to do realistic conversions of time so we need to use the same
- * values the update wall clock code uses as the jiffies size. This value
- * is: TICK_NSEC (which is defined in timex.h). This
- * is a constant and is in nanoseconds. We will used scaled math
- * with a set of scales defined here as SEC_JIFFIE_SC, USEC_JIFFIE_SC and
- * NSEC_JIFFIE_SC. Note that these defines contain nothing but
- * constants and so are computed at compile time. SHIFT_HZ (computed in
- * timex.h) adjusts the scaling for different HZ values.
-
- * Scaled math??? What is that?
- *
- * Scaled math is a way to do integer math on values that would,
- * otherwise, either overflow, underflow, or cause undesired div
- * instructions to appear in the execution path. In short, we "scale"
- * up the operands so they take more bits (more precision, less
- * underflow), do the desired operation and then "scale" the result back
- * by the same amount. If we do the scaling by shifting we avoid the
- * costly mpy and the dastardly div instructions.
-
- * Suppose, for example, we want to convert from seconds to jiffies
- * where jiffies is defined in nanoseconds as NSEC_PER_JIFFIE. The
- * simple math is: jiff = (sec * NSEC_PER_SEC) / NSEC_PER_JIFFIE; We
- * observe that (NSEC_PER_SEC / NSEC_PER_JIFFIE) is a constant which we
- * might calculate at compile time, however, the result will only have
- * about 3-4 bits of precision (less for smaller values of HZ).
- *
- * So, we scale as follows:
- * jiff = (sec) * (NSEC_PER_SEC / NSEC_PER_JIFFIE);
- * jiff = ((sec) * ((NSEC_PER_SEC * SCALE)/ NSEC_PER_JIFFIE)) / SCALE;
- * Then we make SCALE a power of two so:
- * jiff = ((sec) * ((NSEC_PER_SEC << SCALE)/ NSEC_PER_JIFFIE)) >> SCALE;
- * Now we define:
- * #define SEC_CONV = ((NSEC_PER_SEC << SCALE)/ NSEC_PER_JIFFIE))
- * jiff = (sec * SEC_CONV) >> SCALE;
- *
- * Often the math we use will expand beyond 32-bits so we tell C how to
- * do this and pass the 64-bit result of the mpy through the ">> SCALE"
- * which should take the result back to 32-bits. We want this expansion
- * to capture as much precision as possible. At the same time we don't
- * want to overflow so we pick the SCALE to avoid this. In this file,
- * that means using a different scale for each range of HZ values (as
- * defined in timex.h).
- *
- * For those who want to know, gcc will give a 64-bit result from a "*"
- * operator if the result is a long long AND at least one of the
- * operands is cast to long long (usually just prior to the "*" so as
- * not to confuse it into thinking it really has a 64-bit operand,
- * which, buy the way, it can do, but it take more code and at least 2
- * mpys).
-
- * We also need to be aware that one second in nanoseconds is only a
- * couple of bits away from overflowing a 32-bit word, so we MUST use
- * 64-bits to get the full range time in nanoseconds.
-
- */
-
-/*
- * Here are the scales we will use. One for seconds, nanoseconds and
- * microseconds.
- *
- * Within the limits of cpp we do a rough cut at the SEC_JIFFIE_SC and
- * check if the sign bit is set. If not, we bump the shift count by 1.
- * (Gets an extra bit of precision where we can use it.)
- * We know it is set for HZ = 1024 and HZ = 100 not for 1000.
- * Haven't tested others.
-
- * Limits of cpp (for #if expressions) only long (no long long), but
- * then we only need the most signicant bit.
- */
-
-#define SEC_JIFFIE_SC (31 - SHIFT_HZ)
-#if !((((NSEC_PER_SEC << 2) / TICK_NSEC) << (SEC_JIFFIE_SC - 2)) & 0x80000000)
-#undef SEC_JIFFIE_SC
-#define SEC_JIFFIE_SC (32 - SHIFT_HZ)
-#endif
-#define NSEC_JIFFIE_SC (SEC_JIFFIE_SC + 29)
-#define USEC_JIFFIE_SC (SEC_JIFFIE_SC + 19)
-#define SEC_CONVERSION ((unsigned long)((((u64)NSEC_PER_SEC << SEC_JIFFIE_SC) +\
- TICK_NSEC -1) / (u64)TICK_NSEC))
-
-#define NSEC_CONVERSION ((unsigned long)((((u64)1 << NSEC_JIFFIE_SC) +\
- TICK_NSEC -1) / (u64)TICK_NSEC))
-#define USEC_CONVERSION \
- ((unsigned long)((((u64)NSEC_PER_USEC << USEC_JIFFIE_SC) +\
- TICK_NSEC -1) / (u64)TICK_NSEC))
-/*
- * USEC_ROUND is used in the timeval to jiffie conversion. See there
- * for more details. It is the scaled resolution rounding value. Note
- * that it is a 64-bit value. Since, when it is applied, we are already
- * in jiffies (albit scaled), it is nothing but the bits we will shift
- * off.
- */
-#define USEC_ROUND (u64)(((u64)1 << USEC_JIFFIE_SC) - 1)
-/*
- * The maximum jiffie value is (MAX_INT >> 1). Here we translate that
- * into seconds. The 64-bit case will overflow if we are not careful,
- * so use the messy SH_DIV macro to do it. Still all constants.
- */
-#if BITS_PER_LONG < 64
-# define MAX_SEC_IN_JIFFIES \
- (long)((u64)((u64)MAX_JIFFY_OFFSET * TICK_NSEC) / NSEC_PER_SEC)
-#else /* take care of overflow on 64 bits machines */
-# define MAX_SEC_IN_JIFFIES \
- (SH_DIV((MAX_JIFFY_OFFSET >> SEC_JIFFIE_SC) * TICK_NSEC, NSEC_PER_SEC, 1) - 1)
-
-#endif
-/*
- * The TICK_NSEC - 1 rounds up the value to the next resolution. Note
- * that a remainder subtract here would not do the right thing as the
- * resolution values don't fall on second boundries. I.e. the line:
- * nsec -= nsec % TICK_NSEC; is NOT a correct resolution rounding.
- *
- * Rather, we just shift the bits off the right.
- *
- * The >> (NSEC_JIFFIE_SC - SEC_JIFFIE_SC) converts the scaled nsec
- * value to a scaled second value.
- */
-static __inline__ unsigned long
-timespec_to_jiffies(struct timespec *value)
-{
- unsigned long sec = value->tv_sec;
- long nsec = value->tv_nsec + TICK_NSEC - 1;
-
- if (sec >= MAX_SEC_IN_JIFFIES){
- sec = MAX_SEC_IN_JIFFIES;
- nsec = 0;
- }
- return (((u64)sec * SEC_CONVERSION) +
- (((u64)nsec * NSEC_CONVERSION) >>
- (NSEC_JIFFIE_SC - SEC_JIFFIE_SC))) >> SEC_JIFFIE_SC;
+/* Parameters used to convert the timespec values: */
+#define MSEC_PER_SEC 1000L
+#define USEC_PER_SEC 1000000L
+#define NSEC_PER_SEC 1000000000L
+#define NSEC_PER_USEC 1000L
-}
-
-static __inline__ void
-jiffies_to_timespec(unsigned long jiffies, struct timespec *value)
+static inline int timespec_equal(struct timespec *a, struct timespec *b)
{
- /*
- * Convert jiffies to nanoseconds and separate with
- * one divide.
- */
- u64 nsec = (u64)jiffies * TICK_NSEC;
- value->tv_sec = div_long_long_rem(nsec, NSEC_PER_SEC, &value->tv_nsec);
+ return (a->tv_sec == b->tv_sec) && (a->tv_nsec == b->tv_nsec);
}
-/* Same for "timeval"
- *
- * Well, almost. The problem here is that the real system resolution is
- * in nanoseconds and the value being converted is in micro seconds.
- * Also for some machines (those that use HZ = 1024, in-particular),
- * there is a LARGE error in the tick size in microseconds.
-
- * The solution we use is to do the rounding AFTER we convert the
- * microsecond part. Thus the USEC_ROUND, the bits to be shifted off.
- * Instruction wise, this should cost only an additional add with carry
- * instruction above the way it was done above.
+/*
+ * lhs < rhs: return <0
+ * lhs == rhs: return 0
+ * lhs > rhs: return >0
*/
-static __inline__ unsigned long
-timeval_to_jiffies(struct timeval *value)
+static inline int timespec_compare(struct timespec *lhs, struct timespec *rhs)
{
- unsigned long sec = value->tv_sec;
- long usec = value->tv_usec;
-
- if (sec >= MAX_SEC_IN_JIFFIES){
- sec = MAX_SEC_IN_JIFFIES;
- usec = 0;
- }
- return (((u64)sec * SEC_CONVERSION) +
- (((u64)usec * USEC_CONVERSION + USEC_ROUND) >>
- (USEC_JIFFIE_SC - SEC_JIFFIE_SC))) >> SEC_JIFFIE_SC;
+ if (lhs->tv_sec < rhs->tv_sec)
+ return -1;
+ if (lhs->tv_sec > rhs->tv_sec)
+ return 1;
+ return lhs->tv_nsec - rhs->tv_nsec;
}
-static __inline__ void
-jiffies_to_timeval(unsigned long jiffies, struct timeval *value)
+static inline int timeval_compare(struct timeval *lhs, struct timeval *rhs)
{
- /*
- * Convert jiffies to nanoseconds and separate with
- * one divide.
- */
- u64 nsec = (u64)jiffies * TICK_NSEC;
- value->tv_sec = div_long_long_rem(nsec, NSEC_PER_SEC, &value->tv_usec);
- value->tv_usec /= NSEC_PER_USEC;
+ if (lhs->tv_sec < rhs->tv_sec)
+ return -1;
+ if (lhs->tv_sec > rhs->tv_sec)
+ return 1;
+ return lhs->tv_usec - rhs->tv_usec;
}
-static __inline__ int timespec_equal(struct timespec *a, struct timespec *b)
-{
- return (a->tv_sec == b->tv_sec) && (a->tv_nsec == b->tv_nsec);
-}
+extern unsigned long mktime(const unsigned int year, const unsigned int mon,
+ const unsigned int day, const unsigned int hour,
+ const unsigned int min, const unsigned int sec);
-/* Converts Gregorian date to seconds since 1970-01-01 00:00:00.
- * Assumes input in normal date format, i.e. 1980-12-31 23:59:59
- * => year=1980, mon=12, day=31, hour=23, min=59, sec=59.
- *
- * [For the Julian calendar (which was used in Russia before 1917,
- * Britain & colonies before 1752, anywhere else before 1582,
- * and is still in use by some communities) leave out the
- * -year/100+year/400 terms, and add 10.]
- *
- * This algorithm was first published by Gauss (I think).
- *
- * WARNING: this function will overflow on 2106-02-07 06:28:16 on
- * machines were long is 32-bit! (However, as time_t is signed, we
- * will already get problems at other places on 2038-01-19 03:14:08)
+extern void set_normalized_timespec(struct timespec *ts, time_t sec, long nsec);
+
+/*
+ * Returns true if the timespec is norm, false if denorm:
*/
-static inline unsigned long
-mktime (unsigned int year, unsigned int mon,
- unsigned int day, unsigned int hour,
- unsigned int min, unsigned int sec)
-{
- if (0 >= (int) (mon -= 2)) { /* 1..12 -> 11,12,1..10 */
- mon += 12; /* Puts Feb last since it has leap day */
- year -= 1;
- }
-
- return (((
- (unsigned long) (year/4 - year/100 + year/400 + 367*mon/12 + day) +
- year*365 - 719499
- )*24 + hour /* now have hours */
- )*60 + min /* now have minutes */
- )*60 + sec; /* finally seconds */
-}
+#define timespec_valid(ts) \
+ (((ts)->tv_sec >= 0) && (((unsigned long) (ts)->tv_nsec) < NSEC_PER_SEC))
extern struct timespec xtime;
extern struct timespec wall_to_monotonic;
extern seqlock_t xtime_lock;
static inline unsigned long get_seconds(void)
-{
+{
return xtime.tv_sec;
}
struct timespec current_kernel_time(void);
-#define CURRENT_TIME (current_kernel_time())
+#define CURRENT_TIME (current_kernel_time())
+#define CURRENT_TIME_SEC ((struct timespec) { xtime.tv_sec, 0 })
-#endif /* __KERNEL__ */
-
-#define NFDBITS __NFDBITS
-
-#ifdef __KERNEL__
extern void do_gettimeofday(struct timeval *tv);
extern int do_settimeofday(struct timespec *tv);
extern int do_sys_settimeofday(struct timespec *tv, struct timezone *tz);
-extern void clock_was_set(void); // call when ever the clock is set
-extern int do_posix_clock_monotonic_gettime(struct timespec *tp);
-extern long do_nanosleep(struct timespec *t);
-extern long do_utimes(char __user * filename, struct timeval * times);
+#define do_posix_clock_monotonic_gettime(ts) ktime_get_ts(ts)
+extern long do_utimes(int dfd, char __user *filename, struct timeval *times);
struct itimerval;
-extern int do_setitimer(int which, struct itimerval *value, struct itimerval *ovalue);
+extern int do_setitimer(int which, struct itimerval *value,
+ struct itimerval *ovalue);
+extern unsigned int alarm_setitimer(unsigned int seconds);
extern int do_getitimer(int which, struct itimerval *value);
+extern void getnstimeofday(struct timespec *tv);
+
+extern struct timespec timespec_trunc(struct timespec t, unsigned gran);
-static inline void
-set_normalized_timespec (struct timespec *ts, time_t sec, long nsec)
+/**
+ * timespec_to_ns - Convert timespec to nanoseconds
+ * @ts: pointer to the timespec variable to be converted
+ *
+ * Returns the scalar nanosecond representation of the timespec
+ * parameter.
+ */
+static inline s64 timespec_to_ns(const struct timespec *ts)
{
- while (nsec > NSEC_PER_SEC) {
- nsec -= NSEC_PER_SEC;
- ++sec;
- }
- while (nsec < 0) {
- nsec += NSEC_PER_SEC;
- --sec;
- }
- ts->tv_sec = sec;
- ts->tv_nsec = nsec;
+ return ((s64) ts->tv_sec * NSEC_PER_SEC) + ts->tv_nsec;
}
-#endif
+
+/**
+ * timeval_to_ns - Convert timeval to nanoseconds
+ * @ts: pointer to the timeval variable to be converted
+ *
+ * Returns the scalar nanosecond representation of the timeval
+ * parameter.
+ */
+static inline s64 timeval_to_ns(const struct timeval *tv)
+{
+ return ((s64) tv->tv_sec * NSEC_PER_SEC) +
+ tv->tv_usec * NSEC_PER_USEC;
+}
+
+/**
+ * ns_to_timespec - Convert nanoseconds to timespec
+ * @nsec: the nanoseconds value to be converted
+ *
+ * Returns the timespec representation of the nsec parameter.
+ */
+extern struct timespec ns_to_timespec(const s64 nsec);
+
+/**
+ * ns_to_timeval - Convert nanoseconds to timeval
+ * @nsec: the nanoseconds value to be converted
+ *
+ * Returns the timeval representation of the nsec parameter.
+ */
+extern struct timeval ns_to_timeval(const s64 nsec);
+
+#endif /* __KERNEL__ */
+
+#define NFDBITS __NFDBITS
#define FD_SETSIZE __FD_SETSIZE
#define FD_SET(fd,fdsetp) __FD_SET(fd,fdsetp)
/*
* Names of the interval timers, and structure
- * defining a timer setting.
+ * defining a timer setting:
*/
-#define ITIMER_REAL 0
-#define ITIMER_VIRTUAL 1
-#define ITIMER_PROF 2
+#define ITIMER_REAL 0
+#define ITIMER_VIRTUAL 1
+#define ITIMER_PROF 2
-struct itimerspec {
- struct timespec it_interval; /* timer period */
- struct timespec it_value; /* timer expiration */
+struct itimerspec {
+ struct timespec it_interval; /* timer period */
+ struct timespec it_value; /* timer expiration */
};
-struct itimerval {
- struct timeval it_interval; /* timer interval */
- struct timeval it_value; /* current value */
+struct itimerval {
+ struct timeval it_interval; /* timer interval */
+ struct timeval it_value; /* current value */
};
-
/*
- * The IDs of the various system clocks (for POSIX.1b interval timers).
+ * The IDs of the various system clocks (for POSIX.1b interval timers):
*/
-#define CLOCK_REALTIME 0
-#define CLOCK_MONOTONIC 1
-#define CLOCK_PROCESS_CPUTIME_ID 2
-#define CLOCK_THREAD_CPUTIME_ID 3
-#define CLOCK_REALTIME_HR 4
-#define CLOCK_MONOTONIC_HR 5
-
-#define MAX_CLOCKS 6
-#define CLOCKS_MASK (CLOCK_REALTIME | CLOCK_MONOTONIC | \
- CLOCK_REALTIME_HR | CLOCK_MONOTONIC_HR)
-#define CLOCKS_MONO (CLOCK_MONOTONIC & CLOCK_MONOTONIC_HR)
+#define CLOCK_REALTIME 0
+#define CLOCK_MONOTONIC 1
+#define CLOCK_PROCESS_CPUTIME_ID 2
+#define CLOCK_THREAD_CPUTIME_ID 3
/*
- * The various flags for setting POSIX.1b interval timers.
+ * The IDs of various hardware clocks:
*/
+#define CLOCK_SGI_CYCLE 10
+#define MAX_CLOCKS 16
+#define CLOCKS_MASK (CLOCK_REALTIME | CLOCK_MONOTONIC)
+#define CLOCKS_MONO CLOCK_MONOTONIC
-#define TIMER_ABSTIME 0x01
-
+/*
+ * The various flags for setting POSIX.1b interval timers:
+ */
+#define TIMER_ABSTIME 0x01
#endif
git://git.onelab.eu / linux-2.6.git / blobdiff