#ifndef _LINUX_TIMEX_H
#define _LINUX_TIMEX_H
-#include <linux/config.h>
#include <linux/compiler.h>
+#include <linux/time.h>
#include <asm/param.h>
-/*
- * The following defines establish the engineering parameters of the PLL
- * model. The HZ variable establishes the timer interrupt frequency, 100 Hz
- * for the SunOS kernel, 256 Hz for the Ultrix kernel and 1024 Hz for the
- * OSF/1 kernel. The SHIFT_HZ define expresses the same value as the
- * nearest power of two in order to avoid hardware multiply operations.
- */
-#if HZ >= 12 && HZ < 24
-# define SHIFT_HZ 4
-#elif HZ >= 24 && HZ < 48
-# define SHIFT_HZ 5
-#elif HZ >= 48 && HZ < 96
-# define SHIFT_HZ 6
-#elif HZ >= 96 && HZ < 192
-# define SHIFT_HZ 7
-#elif HZ >= 192 && HZ < 384
-# define SHIFT_HZ 8
-#elif HZ >= 384 && HZ < 768
-# define SHIFT_HZ 9
-#elif HZ >= 768 && HZ < 1536
-# define SHIFT_HZ 10
-#else
-# error You lose.
-#endif
-
/*
* SHIFT_KG and SHIFT_KF establish the damping of the PLL and are chosen
* for a slightly underdamped convergence characteristic. SHIFT_KH
* zero to MAXTC, the PLL will converge in 15 minutes to 16 hours,
* respectively.
*/
-#define SHIFT_KG 6 /* phase factor (shift) */
-#define SHIFT_KF 16 /* PLL frequency factor (shift) */
-#define SHIFT_KH 2 /* FLL frequency factor (shift) */
-#define MAXTC 6 /* maximum time constant (shift) */
+#define SHIFT_PLL 4 /* PLL frequency factor (shift) */
+#define SHIFT_FLL 2 /* FLL frequency factor (shift) */
+#define MAXTC 10 /* maximum time constant (shift) */
/*
- * The SHIFT_SCALE define establishes the decimal point of the time_phase
- * variable which serves as an extension to the low-order bits of the
- * system clock variable. The SHIFT_UPDATE define establishes the decimal
- * point of the time_offset variable which represents the current offset
- * with respect to standard time. The FINENSEC define represents 1 nsec in
- * scaled units.
+ * The SHIFT_UPDATE define establishes the decimal point of the
+ * time_offset variable which represents the current offset with
+ * respect to standard time.
*
* SHIFT_USEC defines the scaling (shift) of the time_freq and
* time_tolerance variables, which represent the current frequency
* offset and maximum frequency tolerance.
- *
- * FINENSEC is 1 ns in SHIFT_UPDATE units of the time_phase variable.
*/
-#define SHIFT_SCALE 22 /* phase scale (shift) */
-#define SHIFT_UPDATE (SHIFT_KG + MAXTC) /* time offset scale (shift) */
+#define SHIFT_UPDATE (SHIFT_HZ + 1) /* time offset scale (shift) */
#define SHIFT_USEC 16 /* frequency offset scale (shift) */
-#define FINENSEC (1L << (SHIFT_SCALE - 10)) /* ~1 ns in phase units */
+#define SHIFT_NSEC 12 /* kernel frequency offset scale */
#define MAXPHASE 512000L /* max phase error (us) */
#define MAXFREQ (512L << SHIFT_USEC) /* max frequency error (ppm) */
-#define MAXTIME (200L << PPS_AVG) /* max PPS error (jitter) (200 us) */
-#define MINSEC 16L /* min interval between updates (s) */
-#define MAXSEC 1200L /* max interval between updates (s) */
+#define MAXFREQ_NSEC (512000L << SHIFT_NSEC) /* max frequency error (ppb) */
+#define MINSEC 256 /* min interval between updates (s) */
+#define MAXSEC 2048 /* max interval between updates (s) */
#define NTP_PHASE_LIMIT (MAXPHASE << 5) /* beyond max. dispersion */
-/*
- * The following defines are used only if a pulse-per-second (PPS)
- * signal is available and connected via a modem control lead, such as
- * produced by the optional ppsclock feature incorporated in the Sun
- * asynch driver. They establish the design parameters of the frequency-
- * lock loop used to discipline the CPU clock oscillator to the PPS
- * signal.
- *
- * PPS_AVG is the averaging factor for the frequency loop, as well as
- * the time and frequency dispersion.
- *
- * PPS_SHIFT and PPS_SHIFTMAX specify the minimum and maximum
- * calibration intervals, respectively, in seconds as a power of two.
- *
- * PPS_VALID is the maximum interval before the PPS signal is considered
- * invalid and protocol updates used directly instead.
- *
- * MAXGLITCH is the maximum interval before a time offset of more than
- * MAXTIME is believed.
- */
-#define PPS_AVG 2 /* pps averaging constant (shift) */
-#define PPS_SHIFT 2 /* min interval duration (s) (shift) */
-#define PPS_SHIFTMAX 8 /* max interval duration (s) (shift) */
-#define PPS_VALID 120 /* pps signal watchdog max (s) */
-#define MAXGLITCH 30 /* pps signal glitch max (s) */
-
-/*
- * Pick up the architecture specific timex specifications
- */
-#include <asm/timex.h>
-
-/* LATCH is used in the interval timer and ftape setup. */
-#define LATCH ((CLOCK_TICK_RATE + HZ/2) / HZ) /* For divider */
-
-/* Suppose we want to devide two numbers NOM and DEN: NOM/DEN, the we can
- * improve accuracy by shifting LSH bits, hence calculating:
- * (NOM << LSH) / DEN
- * This however means trouble for large NOM, because (NOM << LSH) may no
- * longer fit in 32 bits. The following way of calculating this gives us
- * some slack, under the following conditions:
- * - (NOM / DEN) fits in (32 - LSH) bits.
- * - (NOM % DEN) fits in (32 - LSH) bits.
- */
-#define SH_DIV(NOM,DEN,LSH) ( ((NOM / DEN) << LSH) \
- + (((NOM % DEN) << LSH) + DEN / 2) / DEN)
-
-/* HZ is the requested value. ACTHZ is actual HZ ("<< 8" is for accuracy) */
-#define ACTHZ (SH_DIV (CLOCK_TICK_RATE, LATCH, 8))
-
-/* TICK_NSEC is the time between ticks in nsec assuming real ACTHZ */
-#define TICK_NSEC (SH_DIV (1000000UL * 1000, ACTHZ, 8))
-
-/* TICK_USEC is the time between ticks in usec assuming fake USER_HZ */
-#define TICK_USEC ((1000000UL + USER_HZ/2) / USER_HZ)
-
-/* TICK_USEC_TO_NSEC is the time between ticks in nsec assuming real ACTHZ and */
-/* a value TUSEC for TICK_USEC (can be set bij adjtimex) */
-#define TICK_USEC_TO_NSEC(TUSEC) (SH_DIV (TUSEC * USER_HZ * 1000, ACTHZ, 8))
-
-
-#include <linux/time.h>
/*
* syscall interface - used (mainly by NTP daemon)
* to discipline kernel clock oscillator
#define TIME_BAD TIME_ERROR /* bw compat */
#ifdef __KERNEL__
+#include <asm/timex.h>
+
/*
* kernel variables
* Note: maximum error = NTP synch distance = dispersion + delay / 2;
/*
* phase-lock loop variables
*/
-extern int time_state; /* clock status */
extern int time_status; /* clock synchronization status bits */
-extern long time_offset; /* time adjustment (us) */
-extern long time_constant; /* pll time constant */
-extern long time_tolerance; /* frequency tolerance (ppm) */
-extern long time_precision; /* clock precision (us) */
extern long time_maxerror; /* maximum error */
extern long time_esterror; /* estimated error */
-extern long time_phase; /* phase offset (scaled us) */
extern long time_freq; /* frequency offset (scaled ppm) */
-extern long time_adj; /* tick adjust (scaled 1 / HZ) */
-extern long time_reftime; /* time at last adjustment (s) */
extern long time_adjust; /* The amount of adjtime left */
-extern long time_next_adjust; /* Value for time_adjust at next tick */
-
-/* interface variables pps->timer interrupt */
-extern long pps_offset; /* pps time offset (us) */
-extern long pps_jitter; /* time dispersion (jitter) (us) */
-extern long pps_freq; /* frequency offset (scaled ppm) */
-extern long pps_stabil; /* frequency dispersion (scaled ppm) */
-extern long pps_valid; /* pps signal watchdog counter */
-
-/* interface variables pps->adjtimex */
-extern int pps_shift; /* interval duration (s) (shift) */
-extern long pps_jitcnt; /* jitter limit exceeded */
-extern long pps_calcnt; /* calibration intervals */
-extern long pps_errcnt; /* calibration errors */
-extern long pps_stbcnt; /* stability limit exceeded */
+
+extern void ntp_clear(void);
+
+/**
+ * ntp_synced - Returns 1 if the NTP status is not UNSYNC
+ *
+ */
+static inline int ntp_synced(void)
+{
+ return !(time_status & STA_UNSYNC);
+}
+
+/* Required to safely shift negative values */
+#define shift_right(x, s) ({ \
+ __typeof__(x) __x = (x); \
+ __typeof__(s) __s = (s); \
+ __x < 0 ? -(-__x >> __s) : __x >> __s; \
+})
+
#ifdef CONFIG_TIME_INTERPOLATION
* for the compensation is that the timer routines are not as scalable anymore.
*/
-#define INTERPOLATOR_ADJUST 65536
-#define INTERPOLATOR_MAX_SKIP 10*INTERPOLATOR_ADJUST
-
struct time_interpolator {
- unsigned short source; /* time source flags */
- unsigned char shift; /* increases accuracy of multiply by shifting. */
- /* Note that bits may be lost if shift is set too high */
- unsigned char jitter; /* if set compensate for fluctuations */
- unsigned nsec_per_cyc; /* set by register_time_interpolator() */
+ u16 source; /* time source flags */
+ u8 shift; /* increases accuracy of multiply by shifting. */
+ /* Note that bits may be lost if shift is set too high */
+ u8 jitter; /* if set compensate for fluctuations */
+ u32 nsec_per_cyc; /* set by register_time_interpolator() */
void *addr; /* address of counter or function */
+ u64 mask; /* mask the valid bits of the counter */
unsigned long offset; /* nsec offset at last update of interpolator */
- unsigned long last_counter; /* counter value in units of the counter at last update */
- unsigned long last_cycle; /* Last timer value if TIME_SOURCE_JITTER is set */
- unsigned long frequency; /* frequency in counts/second */
+ u64 last_counter; /* counter value in units of the counter at last update */
+ u64 last_cycle; /* Last timer value if TIME_SOURCE_JITTER is set */
+ u64 frequency; /* frequency in counts/second */
long drift; /* drift in parts-per-million (or -1) */
unsigned long skips; /* skips forward */
unsigned long ns_skipped; /* nanoseconds skipped */
extern void register_time_interpolator(struct time_interpolator *);
extern void unregister_time_interpolator(struct time_interpolator *);
extern void time_interpolator_reset(void);
-extern unsigned long time_interpolator_resolution(void);
extern unsigned long time_interpolator_get_offset(void);
+extern void time_interpolator_update(long delta_nsec);
#else /* !CONFIG_TIME_INTERPOLATION */
-static inline void
-time_interpolator_reset(void)
+static inline void time_interpolator_reset(void)
+{
+}
+
+static inline void time_interpolator_update(long delta_nsec)
{
}
#endif /* !CONFIG_TIME_INTERPOLATION */
+#define TICK_LENGTH_SHIFT 32
+
+/* Returns how long ticks are at present, in ns / 2^(SHIFT_SCALE-10). */
+extern u64 current_tick_length(void);
+
+extern void second_overflow(void);
+extern void update_ntp_one_tick(void);
+extern int do_adjtimex(struct timex *);
+
+/* Don't use! Compatibility define for existing users. */
+#define tickadj (500/HZ ? : 1)
+
#endif /* KERNEL */
#endif /* LINUX_TIMEX_H */
git://git.onelab.eu / linux-2.6.git / blobdiff