#ifndef _LINUX_TIMEX_H
#define _LINUX_TIMEX_H
-#include <linux/config.h>
#include <linux/compiler.h>
#include <linux/time.h>
#include <asm/param.h>
-#include <asm/timex.h>
/*
* SHIFT_KG and SHIFT_KF establish the damping of the PLL and are chosen
* zero to MAXTC, the PLL will converge in 15 minutes to 16 hours,
* respectively.
*/
-#define SHIFT_KG 6 /* phase factor (shift) */
-#define SHIFT_KF 16 /* PLL frequency factor (shift) */
-#define SHIFT_KH 2 /* FLL frequency factor (shift) */
-#define MAXTC 6 /* maximum time constant (shift) */
+#define SHIFT_PLL 4 /* PLL frequency factor (shift) */
+#define SHIFT_FLL 2 /* FLL frequency factor (shift) */
+#define MAXTC 10 /* maximum time constant (shift) */
/*
- * The SHIFT_SCALE define establishes the decimal point of the time_phase
- * variable which serves as an extension to the low-order bits of the
- * system clock variable. The SHIFT_UPDATE define establishes the decimal
- * point of the time_offset variable which represents the current offset
- * with respect to standard time. The FINENSEC define represents 1 nsec in
- * scaled units.
+ * The SHIFT_UPDATE define establishes the decimal point of the
+ * time_offset variable which represents the current offset with
+ * respect to standard time.
*
* SHIFT_USEC defines the scaling (shift) of the time_freq and
* time_tolerance variables, which represent the current frequency
* offset and maximum frequency tolerance.
- *
- * FINENSEC is 1 ns in SHIFT_UPDATE units of the time_phase variable.
*/
-#define SHIFT_SCALE 22 /* phase scale (shift) */
-#define SHIFT_UPDATE (SHIFT_KG + MAXTC) /* time offset scale (shift) */
+#define SHIFT_UPDATE (SHIFT_HZ + 1) /* time offset scale (shift) */
#define SHIFT_USEC 16 /* frequency offset scale (shift) */
-#define FINENSEC (1L << (SHIFT_SCALE - 10)) /* ~1 ns in phase units */
+#define SHIFT_NSEC 12 /* kernel frequency offset scale */
#define MAXPHASE 512000L /* max phase error (us) */
#define MAXFREQ (512L << SHIFT_USEC) /* max frequency error (ppm) */
-#define MAXTIME (200L << PPS_AVG) /* max PPS error (jitter) (200 us) */
-#define MINSEC 16L /* min interval between updates (s) */
-#define MAXSEC 1200L /* max interval between updates (s) */
+#define MAXFREQ_NSEC (512000L << SHIFT_NSEC) /* max frequency error (ppb) */
+#define MINSEC 256 /* min interval between updates (s) */
+#define MAXSEC 2048 /* max interval between updates (s) */
#define NTP_PHASE_LIMIT (MAXPHASE << 5) /* beyond max. dispersion */
-/*
- * The following defines are used only if a pulse-per-second (PPS)
- * signal is available and connected via a modem control lead, such as
- * produced by the optional ppsclock feature incorporated in the Sun
- * asynch driver. They establish the design parameters of the frequency-
- * lock loop used to discipline the CPU clock oscillator to the PPS
- * signal.
- *
- * PPS_AVG is the averaging factor for the frequency loop, as well as
- * the time and frequency dispersion.
- *
- * PPS_SHIFT and PPS_SHIFTMAX specify the minimum and maximum
- * calibration intervals, respectively, in seconds as a power of two.
- *
- * PPS_VALID is the maximum interval before the PPS signal is considered
- * invalid and protocol updates used directly instead.
- *
- * MAXGLITCH is the maximum interval before a time offset of more than
- * MAXTIME is believed.
- */
-#define PPS_AVG 2 /* pps averaging constant (shift) */
-#define PPS_SHIFT 2 /* min interval duration (s) (shift) */
-#define PPS_SHIFTMAX 8 /* max interval duration (s) (shift) */
-#define PPS_VALID 120 /* pps signal watchdog max (s) */
-#define MAXGLITCH 30 /* pps signal glitch max (s) */
-
/*
* syscall interface - used (mainly by NTP daemon)
* to discipline kernel clock oscillator
#define TIME_BAD TIME_ERROR /* bw compat */
#ifdef __KERNEL__
+#include <asm/timex.h>
+
/*
* kernel variables
* Note: maximum error = NTP synch distance = dispersion + delay / 2;
/*
* phase-lock loop variables
*/
-extern int time_state; /* clock status */
extern int time_status; /* clock synchronization status bits */
-extern long time_offset; /* time adjustment (us) */
-extern long time_constant; /* pll time constant */
-extern long time_tolerance; /* frequency tolerance (ppm) */
-extern long time_precision; /* clock precision (us) */
extern long time_maxerror; /* maximum error */
extern long time_esterror; /* estimated error */
extern long time_freq; /* frequency offset (scaled ppm) */
-extern long time_reftime; /* time at last adjustment (s) */
extern long time_adjust; /* The amount of adjtime left */
-extern long time_next_adjust; /* Value for time_adjust at next tick */
-
-/* interface variables pps->timer interrupt */
-extern long pps_offset; /* pps time offset (us) */
-extern long pps_jitter; /* time dispersion (jitter) (us) */
-extern long pps_freq; /* frequency offset (scaled ppm) */
-extern long pps_stabil; /* frequency dispersion (scaled ppm) */
-extern long pps_valid; /* pps signal watchdog counter */
-
-/* interface variables pps->adjtimex */
-extern int pps_shift; /* interval duration (s) (shift) */
-extern long pps_jitcnt; /* jitter limit exceeded */
-extern long pps_calcnt; /* calibration intervals */
-extern long pps_errcnt; /* calibration errors */
-extern long pps_stbcnt; /* stability limit exceeded */
-/**
- * ntp_clear - Clears the NTP state variables
- *
- * Must be called while holding a write on the xtime_lock
- */
-static inline void ntp_clear(void)
-{
- time_adjust = 0; /* stop active adjtime() */
- time_status |= STA_UNSYNC;
- time_maxerror = NTP_PHASE_LIMIT;
- time_esterror = NTP_PHASE_LIMIT;
-}
+extern void ntp_clear(void);
/**
* ntp_synced - Returns 1 if the NTP status is not UNSYNC
extern void unregister_time_interpolator(struct time_interpolator *);
extern void time_interpolator_reset(void);
extern unsigned long time_interpolator_get_offset(void);
+extern void time_interpolator_update(long delta_nsec);
#else /* !CONFIG_TIME_INTERPOLATION */
-static inline void
-time_interpolator_reset(void)
+static inline void time_interpolator_reset(void)
+{
+}
+
+static inline void time_interpolator_update(long delta_nsec)
{
}
#endif /* !CONFIG_TIME_INTERPOLATION */
+#define TICK_LENGTH_SHIFT 32
+
/* Returns how long ticks are at present, in ns / 2^(SHIFT_SCALE-10). */
extern u64 current_tick_length(void);
+extern void second_overflow(void);
+extern void update_ntp_one_tick(void);
+extern int do_adjtimex(struct timex *);
+
+/* Don't use! Compatibility define for existing users. */
+#define tickadj (500/HZ ? : 1)
+
#endif /* KERNEL */
#endif /* LINUX_TIMEX_H */