#include <linux/delay.h> /* for mdelay() */
#include <linux/interrupt.h> /* for in_interrupt() */
#include <linux/list.h> /* for struct list_head */
+#include <linux/kref.h> /* for struct kref */
#include <linux/device.h> /* for struct device */
#include <linux/fs.h> /* for struct file_operations */
#include <linux/completion.h> /* for struct completion */
#include <linux/sched.h> /* for current && schedule_timeout */
-
-static __inline__ void wait_ms(unsigned int ms)
-{
- if(!in_interrupt()) {
- current->state = TASK_UNINTERRUPTIBLE;
- schedule_timeout(1 + ms * HZ / 1000);
- }
- else
- mdelay(ms);
-}
-
struct usb_device;
struct usb_driver;
/* this maximum is arbitrary */
#define USB_MAXINTERFACES 32
+/**
+ * struct usb_interface_cache - long-term representation of a device interface
+ * @num_altsetting: number of altsettings defined.
+ * @ref: reference counter.
+ * @altsetting: variable-length array of interface structures, one for
+ * each alternate setting that may be selected. Each one includes a
+ * set of endpoint configurations. They will be in no particular order.
+ *
+ * These structures persist for the lifetime of a usb_device, unlike
+ * struct usb_interface (which persists only as long as its configuration
+ * is installed). The altsetting arrays can be accessed through these
+ * structures at any time, permitting comparison of configurations and
+ * providing support for the /proc/bus/usb/devices pseudo-file.
+ */
+struct usb_interface_cache {
+ unsigned num_altsetting; /* number of alternate settings */
+ struct kref ref; /* reference counter */
+
+ /* variable-length array of alternate settings for this interface,
+ * stored in no particular order */
+ struct usb_host_interface altsetting[0];
+};
+#define ref_to_usb_interface_cache(r) \
+ container_of(r, struct usb_interface_cache, ref)
+#define altsetting_to_usb_interface_cache(a) \
+ container_of(a, struct usb_interface_cache, altsetting[0])
+
/**
* struct usb_host_config - representation of a device's configuration
* @desc: the device's configuration descriptor.
- * @interface: array of usb_interface structures, one for each interface
- * in the configuration. The number of interfaces is stored in
- * desc.bNumInterfaces.
+ * @interface: array of pointers to usb_interface structures, one for each
+ * interface in the configuration. The number of interfaces is stored
+ * in desc.bNumInterfaces. These pointers are valid only while the
+ * the configuration is active.
+ * @intf_cache: array of pointers to usb_interface_cache structures, one
+ * for each interface in the configuration. These structures exist
+ * for the entire life of the device.
* @extra: pointer to buffer containing all extra descriptors associated
* with this configuration (those preceding the first interface
* descriptor).
* stored in no particular order */
struct usb_interface *interface[USB_MAXINTERFACES];
+ /* Interface information available even when this is not the
+ * active configuration */
+ struct usb_interface_cache *intf_cache[USB_MAXINTERFACES];
+
unsigned char *extra; /* Extra descriptors */
int extralen;
};
struct device *controller; /* host/master side hardware */
int busnum; /* Bus number (in order of reg) */
char *bus_name; /* stable id (PCI slot_name etc) */
+ u8 otg_port; /* 0, or number of OTG/HNP port */
+ unsigned is_b_host:1; /* true during some HNP roleswitches */
+ unsigned b_hnp_enable:1; /* OTG: did A-Host enable HNP? */
int devnum_next; /* Next open device number in round-robin allocation */
/* mostly for devices emulating SCSI over USB */
extern int usb_reset_device(struct usb_device *dev);
+extern int __usb_reset_device(struct usb_device *dev);
extern struct usb_device *usb_find_device(u16 vendor_id, u16 product_id);
* may need to explicitly claim that lock.
*
*/
-static int inline usb_interface_claimed(struct usb_interface *iface) {
+static inline int usb_interface_claimed(struct usb_interface *iface) {
return (iface->dev.driver != NULL);
}
* calling usb_alloc_urb() and freed with a call to usb_free_urb().
* Initialization may be done using various usb_fill_*_urb() functions. URBs
* are submitted using usb_submit_urb(), and pending requests may be canceled
- * using usb_unlink_urb().
+ * using usb_unlink_urb() or usb_kill_urb().
*
* Data Transfer Buffers:
*
* All URBs submitted must initialize dev, pipe,
* transfer_flags (may be zero), complete, timeout (may be zero).
* The URB_ASYNC_UNLINK transfer flag affects later invocations of
- * the usb_unlink_urb() routine.
+ * the usb_unlink_urb() routine. Note: Failure to set URB_ASYNC_UNLINK
+ * with usb_unlink_urb() is deprecated. For synchronous unlinks use
+ * usb_kill_urb() instead.
*
* All URBs must also initialize
* transfer_buffer and transfer_buffer_length. They may provide the
* URB_NO_SETUP_DMA_MAP indicate which buffers have already been mapped.
* URB_NO_SETUP_DMA_MAP is ignored for non-control URBs.
*
- * Interrupt UBS must provide an interval, saying how often (in milliseconds
+ * Interrupt URBs must provide an interval, saying how often (in milliseconds
* or, for highspeed devices, 125 microsecond units)
* to poll for transfers. After the URB has been submitted, the interval
* field reflects how the transfer was actually scheduled.
struct urb
{
/* private, usb core and host controller only fields in the urb */
+ struct kref kref; /* reference count of the URB */
spinlock_t lock; /* lock for the URB */
- atomic_t count; /* reference count of the URB */
void *hcpriv; /* private data for host controller */
struct list_head urb_list; /* list pointer to all active urbs */
int bandwidth; /* bandwidth for INT/ISO request */
+ atomic_t use_count; /* concurrent submissions counter */
+ u8 reject; /* submissions will fail */
/* public, documented fields in the urb that can be used by drivers */
struct usb_device *dev; /* (in) pointer to associated device */
extern struct urb *usb_get_urb(struct urb *urb);
extern int usb_submit_urb(struct urb *urb, int mem_flags);
extern int usb_unlink_urb(struct urb *urb);
+extern void usb_kill_urb(struct urb *urb);
#define HAVE_USB_BUFFERS
void *usb_buffer_alloc (struct usb_device *dev, size_t size,
void *data, int len, int *actual_length,
int timeout);
+/* selective suspend/resume */
+extern int usb_suspend_device(struct usb_device *dev, u32 state);
+extern int usb_resume_device(struct usb_device *dev);
+
+
/* wrappers around usb_control_msg() for the most common standard requests */
extern int usb_get_descriptor(struct usb_device *dev, unsigned char desctype,
unsigned char descindex, void *buf, int size);
git://git.onelab.eu / linux-2.6.git / blobdiff