/*
- * Copyright (c) 2008, 2009, 2010, 2011, 2012 Nicira Networks
+ * Copyright (c) 2008, 2009, 2010, 2011, 2012, 2013 Nicira, Inc.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
#include "openflow/openflow.h"
#include "openvswitch/types.h"
-/* The following vendor extensions, proposed by Nicira Networks, are not yet
+/* The following vendor extensions, proposed by Nicira, are not yet
* standardized, so they are not included in openflow.h. Some of them may be
* suitable for standardization; others we never expect to standardize. */
-#define NX_VENDOR_ID 0x00002320
\f
/* Nicira vendor-specific error messages extension.
*
struct nicira_header {
struct ofp_header header;
ovs_be32 vendor; /* NX_VENDOR_ID. */
- ovs_be32 subtype; /* One of NXT_* below. */
+ ovs_be32 subtype; /* See the NXT numbers in ofp-msgs.h. */
};
OFP_ASSERT(sizeof(struct nicira_header) == 16);
-/* Values for the 'subtype' member of struct nicira_header. */
-enum nicira_type {
- /* No longer used. */
- NXT_STATUS_REQUEST__OBSOLETE = 0,
- NXT_STATUS_REPLY__OBSOLETE = 1,
- NXT_ACT_SET_CONFIG__OBSOLETE = 2,
- NXT_ACT_GET_CONFIG__OBSOLETE = 3,
- NXT_COMMAND_REQUEST__OBSOLETE = 4,
- NXT_COMMAND_REPLY__OBSOLETE = 5,
- NXT_FLOW_END_CONFIG__OBSOLETE = 6,
- NXT_FLOW_END__OBSOLETE = 7,
- NXT_MGMT__OBSOLETE = 8,
- NXT_TUN_ID_FROM_COOKIE__OBSOLETE = 9,
-
- /* Controller role support. The request body is struct nx_role_request.
- * The reply echos the request. */
- NXT_ROLE_REQUEST = 10,
- NXT_ROLE_REPLY = 11,
-
- /* Flexible flow specification (aka NXM = Nicira Extended Match). */
- NXT_SET_FLOW_FORMAT = 12, /* Set flow format. */
- NXT_FLOW_MOD = 13, /* Analogous to OFPT_FLOW_MOD. */
- NXT_FLOW_REMOVED = 14, /* Analogous to OFPT_FLOW_REMOVED. */
-
- /* Use the upper 8 bits of the 'command' member in struct ofp_flow_mod to
- * designate the table to which a flow is to be added? See the big comment
- * on struct nx_flow_mod_table_id for more information. */
- NXT_FLOW_MOD_TABLE_ID = 15,
-
- /* Alternative PACKET_IN message formats. */
- NXT_SET_PACKET_IN_FORMAT = 16, /* Set Packet In format. */
- NXT_PACKET_IN = 17, /* Nicira Packet In. */
-
- /* Are the idle_age and hard_age members in struct nx_flow_stats supported?
- * If so, the switch does not reply to this message (which consists only of
- * a "struct nicira_header"). If not, the switch sends an error reply. */
- NXT_FLOW_AGE = 18,
-
- NXT_SET_ASYNC_CONFIG = 19, /* struct nx_async_config. */
- NXT_SET_CONTROLLER_ID = 20, /* struct nx_controller_id. */
-};
-
-/* Header for Nicira vendor stats request and reply messages. */
-struct nicira_stats_msg {
- struct ofp_vendor_stats_msg vsm; /* Vendor NX_VENDOR_ID. */
+/* Header for Nicira vendor stats request and reply messages in OpenFlow
+ * 1.0. */
+struct nicira10_stats_msg {
+ struct ofp10_vendor_stats_msg vsm; /* Vendor NX_VENDOR_ID. */
ovs_be32 subtype; /* One of NXST_* below. */
uint8_t pad[4]; /* Align to 64-bits. */
};
-OFP_ASSERT(sizeof(struct nicira_stats_msg) == 24);
+OFP_ASSERT(sizeof(struct nicira10_stats_msg) == 24);
-/* Values for the 'subtype' member of struct nicira_stats_msg. */
-enum nicira_stats_type {
- /* Flexible flow specification (aka NXM = Nicira Extended Match). */
- NXST_FLOW, /* Analogous to OFPST_FLOW. */
- NXST_AGGREGATE /* Analogous to OFPST_AGGREGATE. */
+/* Header for Nicira vendor stats request and reply messages in OpenFlow
+ * 1.1. */
+struct nicira11_stats_msg {
+ struct ofp11_vendor_stats_msg vsm; /* Vendor NX_VENDOR_ID. */
+ ovs_be32 subtype; /* One of NXST_* below. */
};
+OFP_ASSERT(sizeof(struct nicira11_stats_msg) == 24);
/* Fields to use when hashing flows. */
enum nx_hash_fields {
/* This command enables or disables an Open vSwitch extension that allows a
* controller to specify the OpenFlow table to which a flow should be added,
* instead of having the switch decide which table is most appropriate as
- * required by OpenFlow 1.0. By default, the extension is disabled.
+ * required by OpenFlow 1.0. Because NXM was designed as an extension to
+ * OpenFlow 1.0, the extension applies equally to ofp10_flow_mod and
+ * nx_flow_mod. By default, the extension is disabled.
*
- * When this feature is enabled, Open vSwitch treats struct ofp_flow_mod's
- * 16-bit 'command' member as two separate fields. The upper 8 bits are used
- * as the table ID, the lower 8 bits specify the command as usual. A table ID
- * of 0xff is treated like a wildcarded table ID.
+ * When this feature is enabled, Open vSwitch treats struct ofp10_flow_mod's
+ * and struct nx_flow_mod's 16-bit 'command' member as two separate fields.
+ * The upper 8 bits are used as the table ID, the lower 8 bits specify the
+ * command as usual. A table ID of 0xff is treated like a wildcarded table ID.
*
* The specific treatment of the table ID depends on the type of flow mod:
*
* table. If an identical flow already exists in that table only, then it
* is replaced. If the flow cannot be placed in the specified table,
* either because the table is full or because the table cannot support
- * flows of the given type, the switch replies with an
- * OFPFMFC_ALL_TABLES_FULL error. (A controller can distinguish these
- * cases by comparing the current and maximum number of entries reported
- * in ofp_table_stats.)
+ * flows of the given type, the switch replies with an OFPFMFC_TABLE_FULL
+ * error. (A controller can distinguish these cases by comparing the
+ * current and maximum number of entries reported in ofp_table_stats.)
*
* If the table ID is wildcarded, the switch picks an appropriate table
* itself. If an identical flow already exist in the selected flow table,
* table match, then none is modified or deleted.
*/
struct nx_flow_mod_table_id {
- struct ofp_header header;
- ovs_be32 vendor; /* NX_VENDOR_ID. */
- ovs_be32 subtype; /* NXT_FLOW_MOD_TABLE_ID. */
uint8_t set; /* Nonzero to enable, zero to disable. */
uint8_t pad[7];
};
-OFP_ASSERT(sizeof(struct nx_flow_mod_table_id) == 24);
+OFP_ASSERT(sizeof(struct nx_flow_mod_table_id) == 8);
enum nx_packet_in_format {
NXPIF_OPENFLOW10 = 0, /* Standard OpenFlow 1.0 compatible. */
/* NXT_SET_PACKET_IN_FORMAT request. */
struct nx_set_packet_in_format {
- struct nicira_header nxh;
ovs_be32 format; /* One of NXPIF_*. */
};
-OFP_ASSERT(sizeof(struct nx_set_packet_in_format) == 20);
+OFP_ASSERT(sizeof(struct nx_set_packet_in_format) == 4);
/* NXT_PACKET_IN (analogous to OFPT_PACKET_IN).
*
- * The NXT_PACKET_IN format is intended to model the OpenFlow-1.2 PACKET_IN
- * with some minor tweaks. Most notably NXT_PACKET_IN includes the cookie of
- * the rule which triggered the NXT_PACKET_IN message, and the match fields are
- * in NXM format.
+ * NXT_PACKET_IN is similar to the OpenFlow 1.2 OFPT_PACKET_IN. The
+ * differences are:
*
- * The match fields in the NXT_PACKET_IN are intended to contain flow
- * processing metadata collected at the time the NXT_PACKET_IN message was
- * triggered. It is minimally required to contain the NXM_OF_IN_PORT of the
- * packet, but may include other NXM headers such as flow registers. The match
- * fields are allowed to contain non-metadata (e.g. NXM_OF_ETH_SRC etc).
- * However, this information can typically be found in the packet directly, so
- * it may be redundant.
+ * - NXT_PACKET_IN includes the cookie of the rule that triggered the
+ * message. (OpenFlow 1.3 OFPT_PACKET_IN also includes the cookie.)
+ *
+ * - The metadata fields use NXM (instead of OXM) field numbers.
+ *
+ * Open vSwitch 1.9.0 and later omits metadata fields that are zero (as allowed
+ * by OpenFlow 1.2). Earlier versions included all implemented metadata
+ * fields.
+ *
+ * Open vSwitch does not include non-metadata in the nx_match, because by
+ * definition that information can be found in the packet itself. The format
+ * and the standards allow this, however, so controllers should be prepared to
+ * tolerate future changes.
+ *
+ * The NXM format is convenient for reporting metadata values, but it is
+ * important not to interpret the format as matching against a flow, because it
+ * does not. Nothing is being matched; arbitrary metadata masks would not be
+ * meaningful.
*
* Whereas in most cases a controller can expect to only get back NXM fields
* that it set up itself (e.g. flow dumps will ordinarily report only NXM
* fields from flows that the controller added), NXT_PACKET_IN messages might
* contain fields that the controller does not understand, because the switch
* might support fields (new registers, new protocols, etc.) that the
- * controller does not. The controller must prepared to tolerate these.
+ * controller does not. The controller must prepared to tolerate these.
*
- * The 'cookie' and 'table_id' fields have no meaning when 'reason' is
- * OFPR_NO_MATCH. In this case they should be set to 0. */
+ * The 'cookie' field has no meaning when 'reason' is OFPR_NO_MATCH. In this
+ * case it should be UINT64_MAX. */
struct nx_packet_in {
- struct nicira_header nxh;
ovs_be32 buffer_id; /* ID assigned by datapath. */
ovs_be16 total_len; /* Full length of frame. */
uint8_t reason; /* Reason packet is sent (one of OFPR_*). */
* The padding bytes preceding the Ethernet frame ensure that the IP
* header (if any) following the Ethernet header is 32-bit aligned. */
- /* uint8_t nxm_fields[...]; */ /* Match. */
+ /* uint8_t nxm_fields[...]; */ /* NXM headers. */
/* uint8_t pad[2]; */ /* Align to 64 bit + 16 bit. */
/* uint8_t data[0]; */ /* Ethernet frame. */
};
-OFP_ASSERT(sizeof(struct nx_packet_in) == 40);
+OFP_ASSERT(sizeof(struct nx_packet_in) == 24);
/* Configures the "role" of the sending controller. The default role is:
*
* messages, but they do receive OFPT_PORT_STATUS messages.
*/
struct nx_role_request {
- struct nicira_header nxh;
ovs_be32 role; /* One of NX_ROLE_*. */
};
-OFP_ASSERT(sizeof(struct nx_role_request) == 20);
+OFP_ASSERT(sizeof(struct nx_role_request) == 4);
enum nx_role {
NX_ROLE_OTHER, /* Default role, full access. */
* with value 1<<2 == 4 in port_status_mask[1] determines whether the
* controller will receive OFPT_PORT_STATUS messages with reason OFPPR_MODIFY
* (value 2) when the controller has a "slave" role.
+ *
+ * As a side effect, for service controllers, this message changes the
+ * miss_send_len from default of zero to OFP_DEFAULT_MISS_SEND_LEN (128).
*/
struct nx_async_config {
- struct nicira_header nxh;
ovs_be32 packet_in_mask[2]; /* Bitmasks of OFPR_* values. */
ovs_be32 port_status_mask[2]; /* Bitmasks of OFPRR_* values. */
ovs_be32 flow_removed_mask[2]; /* Bitmasks of OFPPR_* values. */
};
-OFP_ASSERT(sizeof(struct nx_async_config) == 40);
+OFP_ASSERT(sizeof(struct nx_async_config) == 24);
\f
/* Nicira vendor flow actions. */
NXAST_NOTE, /* struct nx_action_note */
NXAST_SET_TUNNEL64, /* struct nx_action_set_tunnel64 */
NXAST_MULTIPATH, /* struct nx_action_multipath */
- NXAST_AUTOPATH, /* struct nx_action_autopath */
+ NXAST_AUTOPATH__OBSOLETE, /* No longer used. */
NXAST_BUNDLE, /* struct nx_action_bundle */
NXAST_BUNDLE_LOAD, /* struct nx_action_bundle */
NXAST_RESUBMIT_TABLE, /* struct nx_action_resubmit */
NXAST_DEC_TTL, /* struct nx_action_header */
NXAST_FIN_TIMEOUT, /* struct nx_action_fin_timeout */
NXAST_CONTROLLER, /* struct nx_action_controller */
+ NXAST_DEC_TTL_CNT_IDS, /* struct nx_action_cnt_ids */
+ NXAST_WRITE_METADATA, /* struct nx_action_write_metadata */
+ NXAST_PUSH_MPLS, /* struct nx_action_push_mpls */
+ NXAST_POP_MPLS, /* struct nx_action_pop_mpls */
+ NXAST_SET_MPLS_TTL, /* struct nx_action_ttl */
+ NXAST_DEC_MPLS_TTL, /* struct nx_action_header */
+ NXAST_STACK_PUSH, /* struct nx_action_stack */
+ NXAST_STACK_POP, /* struct nx_action_stack */
+ NXAST_SAMPLE, /* struct nx_action_sample */
+ NXAST_SET_MPLS_LABEL, /* struct nx_action_ttl */
+ NXAST_SET_MPLS_TC, /* struct nx_action_ttl */
};
/* Header for Nicira-defined actions. */
* Sets the encapsulating tunnel ID to a 64-bit value. */
struct nx_action_set_tunnel64 {
ovs_be16 type; /* OFPAT_VENDOR. */
- ovs_be16 len; /* Length is 16. */
+ ovs_be16 len; /* Length is 24. */
ovs_be32 vendor; /* NX_VENDOR_ID. */
ovs_be16 subtype; /* NXAST_SET_TUNNEL64. */
uint8_t pad[6];
* - NXM_NX_ND_SLL
* - NXM_NX_ND_TLL
* - NXM_NX_REG(idx) for idx in the switch's accepted range.
+ * - NXM_NX_PKT_MARK
+ * - NXM_NX_TUN_IPV4_SRC
+ * - NXM_NX_TUN_IPV4_DST
*
* The following nxm_header values are potentially acceptable as 'dst':
*
* - NXM_OF_TCP_DST
* - NXM_OF_UDP_SRC
* - NXM_OF_UDP_DST
+ * - NXM_NX_ARP_SHA
+ * - NXM_NX_ARP_THA
+ * - NXM_OF_ARP_OP
+ * - NXM_OF_ARP_SPA
+ * - NXM_OF_ARP_TPA
* Modifying any of the above fields changes the corresponding packet
* header.
*
+ * - NXM_OF_IN_PORT
+ *
* - NXM_NX_REG(idx) for idx in the switch's accepted range.
*
+ * - NXM_NX_PKT_MARK
+ *
* - NXM_OF_VLAN_TCI. Modifying this field's value has side effects on the
* packet's 802.1Q header. Setting a value with CFI=0 removes the 802.1Q
* header (if any), ignoring the other bits. Setting a value with CFI=1
* adds or modifies the 802.1Q header appropriately, setting the TCI field
* to the field's new value (with the CFI bit masked out).
*
- * - NXM_NX_TUN_ID. Modifying this value modifies the tunnel ID used for the
- * packet's next tunnel encapsulation.
+ * - NXM_NX_TUN_ID, NXM_NX_TUN_IPV4_SRC, NXM_NX_TUN_IPV4_DST. Modifying
+ * any of these values modifies the corresponding tunnel header field used
+ * for the packet's next tunnel encapsulation, if allowed by the
+ * configuration of the output tunnel port.
*
* A given nxm_header value may be used as 'src' or 'dst' only on a flow whose
* nx_match satisfies its prerequisites. For example, NXM_OF_IP_TOS may be
* The switch will reject actions for which src_ofs+n_bits is greater than the
* width of 'src' or dst_ofs+n_bits is greater than the width of 'dst' with
* error type OFPET_BAD_ACTION, code OFPBAC_BAD_ARGUMENT.
+ *
+ * This action behaves properly when 'src' overlaps with 'dst', that is, it
+ * behaves as if 'src' were copied out to a temporary buffer, then the
+ * temporary buffer copied to 'dst'.
*/
struct nx_action_reg_move {
ovs_be16 type; /* OFPAT_VENDOR. */
- ovs_be16 len; /* Length is 16. */
+ ovs_be16 len; /* Length is 24. */
ovs_be32 vendor; /* NX_VENDOR_ID. */
ovs_be16 subtype; /* NXAST_REG_MOVE. */
ovs_be16 n_bits; /* Number of bits. */
*/
struct nx_action_reg_load {
ovs_be16 type; /* OFPAT_VENDOR. */
- ovs_be16 len; /* Length is 16. */
+ ovs_be16 len; /* Length is 24. */
ovs_be32 vendor; /* NX_VENDOR_ID. */
ovs_be16 subtype; /* NXAST_REG_LOAD. */
ovs_be16 ofs_nbits; /* (ofs << 6) | (n_bits - 1). */
};
OFP_ASSERT(sizeof(struct nx_action_reg_load) == 24);
+/* Action structure for NXAST_STACK_PUSH and NXAST_STACK_POP.
+ *
+ * Pushes (or pops) field[offset: offset + n_bits] to (or from)
+ * top of the stack.
+ */
+struct nx_action_stack {
+ ovs_be16 type; /* OFPAT_VENDOR. */
+ ovs_be16 len; /* Length is 16. */
+ ovs_be32 vendor; /* NX_VENDOR_ID. */
+ ovs_be16 subtype; /* NXAST_STACK_PUSH or NXAST_STACK_POP. */
+ ovs_be16 offset; /* Bit offset into the field. */
+ ovs_be32 field; /* The field used for push or pop. */
+ ovs_be16 n_bits; /* (n_bits + 1) bits of the field. */
+ uint8_t zero[6]; /* Reserved, must be zero. */
+};
+OFP_ASSERT(sizeof(struct nx_action_stack) == 24);
+
/* Action structure for NXAST_NOTE.
*
* This action has no effect. It is variable length. The switch does not
};
OFP_ASSERT(sizeof(struct nx_action_fin_timeout) == 16);
\f
-/* Action structure for NXAST_AUTOPATH.
- *
- * This action performs the following steps in sequence:
- *
- * 1. Hashes the flow using an implementation-defined hash function.
- *
- * The hashed fields' values are drawn from the current state of the
- * flow, including all modifications that have been made by actions up to
- * this point.
- *
- * 2. Selects an OpenFlow 'port'.
- *
- * 'port' is selected in an implementation-defined manner, taking into
- * account 'id' and the hash value calculated in step 1.
- *
- * Generally a switch will have been configured with a set of ports that
- * may be chosen given 'id'. The switch may take into account any number
- * of factors when choosing 'port' from its configured set. Factors may
- * include carrier, load, and the results of configuration protocols such
- * as LACP.
- *
- * 3. Stores 'port' in dst[ofs:ofs+n_bits].
- *
- * The format and semantics of 'dst' and 'ofs_nbits' are similar to those
- * for the NXAST_REG_LOAD action.
- *
- * The switch will reject actions in which ofs+n_bits is greater than the width
- * of 'dst', with error type OFPET_BAD_ACTION, code OFPBAC_BAD_ARGUMENT.
- */
-struct nx_action_autopath {
- ovs_be16 type; /* OFPAT_VENDOR. */
- ovs_be16 len; /* Length is 20. */
- ovs_be32 vendor; /* NX_VENDOR_ID. */
- ovs_be16 subtype; /* NXAST_AUTOPATH. */
-
- /* Where to store the result. */
- ovs_be16 ofs_nbits; /* (ofs << 6) | (n_bits - 1). */
- ovs_be32 dst; /* Destination. */
-
- ovs_be32 id; /* Autopath ID. */
- ovs_be32 pad;
-};
-OFP_ASSERT(sizeof(struct nx_action_autopath) == 24);
-\f
/* Action structure for NXAST_BUNDLE and NXAST_BUNDLE_LOAD.
*
* The bundle actions choose a slave from a supplied list of options.
* Uses the 'fields' and 'basis' parameters. */
NX_BD_ALG_HRW /* Highest Random Weight. */
};
+
+\f
+/* Action structure for NXAST_DEC_TTL_CNT_IDS.
+ *
+ * If the packet is not IPv4 or IPv6, does nothing. For IPv4 or IPv6, if the
+ * TTL or hop limit is at least 2, decrements it by 1. Otherwise, if TTL or
+ * hop limit is 0 or 1, sends a packet-in to the controllers with each of the
+ * 'n_controllers' controller IDs specified in 'cnt_ids'.
+ *
+ * (This differs from NXAST_DEC_TTL in that for NXAST_DEC_TTL the packet-in is
+ * sent only to controllers with id 0.)
+ */
+struct nx_action_cnt_ids {
+ ovs_be16 type; /* OFPAT_VENDOR. */
+ ovs_be16 len; /* Length including slaves. */
+ ovs_be32 vendor; /* NX_VENDOR_ID. */
+ ovs_be16 subtype; /* NXAST_DEC_TTL_CNT_IDS. */
+
+ ovs_be16 n_controllers; /* Number of controllers. */
+ uint8_t zeros[4]; /* Must be zero. */
+
+ /* Followed by 1 or more controller ids.
+ *
+ * uint16_t cnt_ids[]; // Controller ids.
+ * uint8_t pad[]; // Must be 0 to 8-byte align cnt_ids[].
+ */
+};
+OFP_ASSERT(sizeof(struct nx_action_cnt_ids) == 16);
+
\f
/* Action structure for NXAST_OUTPUT_REG.
*
\f
/* Flexible flow specifications (aka NXM = Nicira Extended Match).
*
- * OpenFlow 1.0 has "struct ofp_match" for specifying flow matches. This
+ * OpenFlow 1.0 has "struct ofp10_match" for specifying flow matches. This
* structure is fixed-length and hence difficult to extend. This section
* describes a more flexible, variable-length flow match, called "nx_match" for
* short, that is also supported by Open vSwitch. This section also defines a
- * replacement for each OpenFlow message that includes struct ofp_match.
+ * replacement for each OpenFlow message that includes struct ofp10_match.
*
*
* Format
* value, called "nxm_mask". For each 1-bit in position J in nxm_mask, the
* nx_match matches only packets for which bit J in the given field's value
* matches bit J in nxm_value. A 0-bit in nxm_mask causes the
- * corresponding bits in nxm_value and the field's value to be ignored.
- * (The sense of the nxm_mask bits is the opposite of that used by the
- * "wildcards" member of struct ofp_match.)
+ * corresponding bit in nxm_value is ignored (it should be 0; Open vSwitch
+ * may enforce this someday), as is the corresponding bit in the field's
+ * value. (The sense of the nxm_mask bits is the opposite of that used by
+ * the "wildcards" member of struct ofp10_match.)
*
* When nxm_hasmask is 1, nxm_length is always even.
*
*
* Format: 48-bit Ethernet MAC address.
*
- * Masking: The nxm_mask patterns 01:00:00:00:00:00 and FE:FF:FF:FF:FF:FF must
- * be supported for NXM_OF_ETH_DST_W (as well as the trivial patterns that
- * are all-0-bits or all-1-bits). Support for other patterns and for masking
- * of NXM_OF_ETH_SRC is optional. */
+ * Masking: Fully maskable, in versions 1.8 and later. Earlier versions only
+ * supported the following masks for NXM_OF_ETH_DST_W: 00:00:00:00:00:00,
+ * fe:ff:ff:ff:ff:ff, 01:00:00:00:00:00, ff:ff:ff:ff:ff:ff. */
#define NXM_OF_ETH_DST NXM_HEADER (0x0000, 1, 6)
#define NXM_OF_ETH_DST_W NXM_HEADER_W(0x0000, 1, 6)
#define NXM_OF_ETH_SRC NXM_HEADER (0x0000, 2, 6)
+#define NXM_OF_ETH_SRC_W NXM_HEADER_W(0x0000, 2, 6)
/* Packet's Ethernet type.
*
*
* Format: 32-bit integer in network byte order.
*
- * Masking: Only CIDR masks are allowed, that is, masks that consist of N
+ * Masking: Fully maskable, in Open vSwitch 1.8 and later. In earlier
+ * versions, only CIDR masks are allowed, that is, masks that consist of N
* high-order bits set to 1 and the other 32-N bits set to 0. */
#define NXM_OF_IP_SRC NXM_HEADER (0x0000, 7, 4)
#define NXM_OF_IP_SRC_W NXM_HEADER_W(0x0000, 7, 4)
* otherwise. Only ARP opcodes between 1 and 255 should be specified for
* matching.
*
- * Prereqs: NXM_OF_ETH_TYPE must match 0x0806 exactly.
+ * Prereqs: NXM_OF_ETH_TYPE must match either 0x0806 or 0x8035.
*
* Format: 16-bit integer in network byte order.
*
/* For an Ethernet+IP ARP packet, the source or target protocol address
* in the ARP header. Always 0 otherwise.
*
- * Prereqs: NXM_OF_ETH_TYPE must match 0x0806 exactly.
+ * Prereqs: NXM_OF_ETH_TYPE must match either 0x0806 or 0x8035.
*
* Format: 32-bit integer in network byte order.
*
- * Masking: Only CIDR masks are allowed, that is, masks that consist of N
+ * Masking: Fully maskable, in Open vSwitch 1.8 and later. In earlier
+ * versions, only CIDR masks are allowed, that is, masks that consist of N
* high-order bits set to 1 and the other 32-N bits set to 0. */
#define NXM_OF_ARP_SPA NXM_HEADER (0x0000, 16, 4)
#define NXM_OF_ARP_SPA_W NXM_HEADER_W(0x0000, 16, 4)
/* Tunnel ID.
*
- * For a packet received via GRE tunnel including a (32-bit) key, the key is
- * stored in the low 32-bits and the high bits are zeroed. For other packets,
- * the value is 0.
+ * For a packet received via a GRE, VXLAN or LISP tunnel including a (32-bit)
+ * key, the key is stored in the low 32-bits and the high bits are zeroed. For
+ * other packets, the value is 0.
+ *
+ * All zero bits, for packets not received via a keyed tunnel.
*
* Prereqs: None.
*
/* For an Ethernet+IP ARP packet, the source or target hardware address
* in the ARP header. Always 0 otherwise.
*
- * Prereqs: NXM_OF_ETH_TYPE must match 0x0806 exactly.
+ * Prereqs: NXM_OF_ETH_TYPE must match either 0x0806 or 0x8035.
*
* Format: 48-bit Ethernet MAC address.
*
*
* Format: 128-bit IPv6 address.
*
- * Masking: Only CIDR masks are allowed, that is, masks that consist of N
+ * Masking: Fully maskable, in Open vSwitch 1.8 and later. In previous
+ * versions, only CIDR masks are allowed, that is, masks that consist of N
* high-order bits set to 1 and the other 128-N bits set to 0. */
#define NXM_NX_IPV6_SRC NXM_HEADER (0x0001, 19, 16)
#define NXM_NX_IPV6_SRC_W NXM_HEADER_W(0x0001, 19, 16)
*
* Format: 128-bit IPv6 address.
*
- * Masking: Only CIDR masks are allowed, that is, masks that consist of N
+ * Masking: Fully maskable, in Open vSwitch 1.8 and later. In previous
+ * versions, only CIDR masks are allowed, that is, masks that consist of N
* high-order bits set to 1 and the other 128-N bits set to 0. */
#define NXM_NX_ND_TARGET NXM_HEADER (0x0001, 23, 16)
#define NXM_NX_ND_TARGET_W NXM_HEADER_W (0x0001, 23, 16)
*
* Format: 20-bit IPv6 flow label in least-significant bits.
*
- * Masking: Not maskable. */
-#define NXM_NX_IPV6_LABEL NXM_HEADER (0x0001, 27, 4)
+ * Masking: Fully maskable. */
+#define NXM_NX_IPV6_LABEL NXM_HEADER (0x0001, 27, 4)
+#define NXM_NX_IPV6_LABEL_W NXM_HEADER_W(0x0001, 27, 4)
/* The ECN of the IP header.
*
#define NXM_NX_COOKIE NXM_HEADER (0x0001, 30, 8)
#define NXM_NX_COOKIE_W NXM_HEADER_W(0x0001, 30, 8)
+/* The source or destination address in the outer IP header of a tunneled
+ * packet.
+ *
+ * For non-tunneled packets, the value is 0.
+ *
+ * Prereqs: None.
+ *
+ * Format: 32-bit integer in network byte order.
+ *
+ * Masking: Fully maskable. */
+#define NXM_NX_TUN_IPV4_SRC NXM_HEADER (0x0001, 31, 4)
+#define NXM_NX_TUN_IPV4_SRC_W NXM_HEADER_W(0x0001, 31, 4)
+#define NXM_NX_TUN_IPV4_DST NXM_HEADER (0x0001, 32, 4)
+#define NXM_NX_TUN_IPV4_DST_W NXM_HEADER_W(0x0001, 32, 4)
+
+/* Metadata marked onto the packet in a system-dependent manner.
+ *
+ * The packet mark may be used to carry contextual information
+ * to other parts of the system outside of Open vSwitch. As a
+ * result, the semantics depend on system in use.
+ *
+ * Prereqs: None.
+ *
+ * Format: 32-bit integer in network byte order.
+ *
+ * Masking: Fully maskable. */
+#define NXM_NX_PKT_MARK NXM_HEADER (0x0001, 33, 4)
+#define NXM_NX_PKT_MARK_W NXM_HEADER_W(0x0001, 33, 4)
+
+/* The flags in the TCP header.
+*
+* Prereqs:
+* NXM_OF_ETH_TYPE must be either 0x0800 or 0x86dd.
+* NXM_OF_IP_PROTO must match 6 exactly.
+*
+* Format: 16-bit integer with 4 most-significant bits forced to 0.
+*
+* Masking: Bits 0-11 fully maskable. */
+#define NXM_NX_TCP_FLAGS NXM_HEADER (0x0001, 34, 2)
+#define NXM_NX_TCP_FLAGS_W NXM_HEADER_W(0x0001, 34, 2)
+
/* ## --------------------- ## */
/* ## Requests and replies. ## */
/* ## --------------------- ## */
/* NXT_SET_FLOW_FORMAT request. */
struct nx_set_flow_format {
- struct nicira_header nxh;
ovs_be32 format; /* One of NXFF_*. */
};
-OFP_ASSERT(sizeof(struct nx_set_flow_format) == 20);
+OFP_ASSERT(sizeof(struct nx_set_flow_format) == 4);
/* NXT_FLOW_MOD (analogous to OFPT_FLOW_MOD).
*
* It is possible to limit flow deletions and modifications to certain
- * cookies by using the NXM_NX_COOKIE and NXM_NX_COOKIE_W matches. For
- * these commands, the "cookie" field is always ignored. Flow additions
- * make use of the "cookie" field and ignore any NXM_NX_COOKIE*
- * definitions.
+ * cookies by using the NXM_NX_COOKIE(_W) matches. The "cookie" field
+ * is used only to add or modify flow cookies.
*/
struct nx_flow_mod {
- struct nicira_header nxh;
ovs_be64 cookie; /* Opaque controller-issued identifier. */
- ovs_be16 command; /* One of OFPFC_*. */
+ ovs_be16 command; /* OFPFC_* + possibly a table ID (see comment
+ * on struct nx_flow_mod_table_id). */
ovs_be16 idle_timeout; /* Idle time before discarding (seconds). */
ovs_be16 hard_timeout; /* Max time before discarding (seconds). */
ovs_be16 priority; /* Priority level of flow entry. */
* multiple of 8).
*/
};
-OFP_ASSERT(sizeof(struct nx_flow_mod) == 48);
+OFP_ASSERT(sizeof(struct nx_flow_mod) == 32);
-/* NXT_FLOW_REMOVED (analogous to OFPT_FLOW_REMOVED). */
+/* NXT_FLOW_REMOVED (analogous to OFPT_FLOW_REMOVED).
+ *
+ * 'table_id' is present only in Open vSwitch 1.11 and later. In earlier
+ * versions of Open vSwitch, this is a padding byte that is always zeroed.
+ * Therefore, a 'table_id' value of 0 indicates that the table ID is not known,
+ * and other values may be interpreted as one more than the flow's former table
+ * ID. */
struct nx_flow_removed {
- struct nicira_header nxh;
ovs_be64 cookie; /* Opaque controller-issued identifier. */
ovs_be16 priority; /* Priority level of flow entry. */
uint8_t reason; /* One of OFPRR_*. */
- uint8_t pad[1]; /* Align to 32-bits. */
+ uint8_t table_id; /* Flow's former table ID, plus one. */
ovs_be32 duration_sec; /* Time flow was alive in seconds. */
ovs_be32 duration_nsec; /* Time flow was alive in nanoseconds beyond
duration_sec. */
* - Exactly (match_len + 7)/8*8 - match_len (between 0 and 7) bytes of
* all-zero bytes. */
};
-OFP_ASSERT(sizeof(struct nx_flow_removed) == 56);
+OFP_ASSERT(sizeof(struct nx_flow_removed) == 40);
/* Nicira vendor stats request of type NXST_FLOW (analogous to OFPST_FLOW
* request).
* NXM_NX_COOKIE and NXM_NX_COOKIE_W matches.
*/
struct nx_flow_stats_request {
- struct nicira_stats_msg nsm;
ovs_be16 out_port; /* Require matching entries to include this
as an output port. A value of OFPP_NONE
indicates no restriction. */
* message.
*/
};
-OFP_ASSERT(sizeof(struct nx_flow_stats_request) == 32);
+OFP_ASSERT(sizeof(struct nx_flow_stats_request) == 8);
/* Body for Nicira vendor stats reply of type NXST_FLOW (analogous to
* OFPST_FLOW reply).
ovs_be32 duration_sec; /* Time flow has been alive in seconds. */
ovs_be32 duration_nsec; /* Time flow has been alive in nanoseconds
beyond duration_sec. */
- ovs_be16 priority; /* Priority of the entry. Only meaningful
- when this is not an exact-match entry. */
+ ovs_be16 priority; /* Priority of the entry. */
ovs_be16 idle_timeout; /* Number of seconds idle before expiration. */
ovs_be16 hard_timeout; /* Number of seconds before expiration. */
ovs_be16 match_len; /* Length of nx_match. */
OFP_ASSERT(sizeof(struct nx_flow_stats) == 48);
/* Nicira vendor stats request of type NXST_AGGREGATE (analogous to
- * OFPST_AGGREGATE request). */
+ * OFPST_AGGREGATE request).
+ *
+ * The reply format is identical to the reply format for OFPST_AGGREGATE,
+ * except for the header. */
struct nx_aggregate_stats_request {
- struct nicira_stats_msg nsm;
ovs_be16 out_port; /* Require matching entries to include this
as an output port. A value of OFPP_NONE
indicates no restriction. */
* message.
*/
};
-OFP_ASSERT(sizeof(struct nx_aggregate_stats_request) == 32);
-
-/* Body for nicira_stats_msg reply of type NXST_AGGREGATE (analogous to
- * OFPST_AGGREGATE reply). */
-struct nx_aggregate_stats_reply {
- struct nicira_stats_msg nsm;
- ovs_be64 packet_count; /* Number of packets, UINT64_MAX if unknown. */
- ovs_be64 byte_count; /* Number of bytes, UINT64_MAX if unknown. */
- ovs_be32 flow_count; /* Number of flows. */
- uint8_t pad[4]; /* Align to 64 bits. */
-};
-OFP_ASSERT(sizeof(struct nx_aggregate_stats_reply) == 48);
+OFP_ASSERT(sizeof(struct nx_aggregate_stats_request) == 8);
\f
/* NXT_SET_CONTROLLER_ID.
*
* The NXAST_CONTROLLER action is the only current user of controller
* connection IDs. */
struct nx_controller_id {
- struct nicira_header nxh;
uint8_t zero[6]; /* Must be zero. */
ovs_be16 controller_id; /* New controller connection ID. */
};
-OFP_ASSERT(sizeof(struct nx_controller_id) == 24);
+OFP_ASSERT(sizeof(struct nx_controller_id) == 8);
/* Action structure for NXAST_CONTROLLER.
*
uint8_t zero; /* Must be zero. */
};
OFP_ASSERT(sizeof(struct nx_action_controller) == 16);
+\f
+/* Flow Table Monitoring
+ * =====================
+ *
+ * NXST_FLOW_MONITOR allows a controller to keep track of changes to OpenFlow
+ * flow table(s) or subsets of them, with the following workflow:
+ *
+ * 1. The controller sends an NXST_FLOW_MONITOR request to begin monitoring
+ * flows. The 'id' in the request must be unique among all monitors that
+ * the controller has started and not yet canceled on this OpenFlow
+ * connection.
+ *
+ * 2. The switch responds with an NXST_FLOW_MONITOR reply. If the request's
+ * 'flags' included NXFMF_INITIAL, the reply includes all the flows that
+ * matched the request at the time of the request (with event NXFME_ADDED).
+ * If 'flags' did not include NXFMF_INITIAL, the reply is empty.
+ *
+ * The reply uses the xid of the request (as do all replies to OpenFlow
+ * requests).
+ *
+ * 3. Whenever a change to a flow table entry matches some outstanding monitor
+ * request's criteria and flags, the switch sends a notification to the
+ * controller as an additional NXST_FLOW_MONITOR reply with xid 0.
+ *
+ * When multiple outstanding monitors match a single change, only a single
+ * notification is sent. This merged notification includes the information
+ * requested in any of the individual monitors. That is, if any of the
+ * matching monitors requests actions (NXFMF_ACTIONS), the notification
+ * includes actions, and if any of the monitors request full changes for the
+ * controller's own changes (NXFMF_OWN), the controller's own changes will
+ * be included in full.
+ *
+ * 4. The controller may cancel a monitor with NXT_FLOW_MONITOR_CANCEL. No
+ * further notifications will be sent on the basis of the canceled monitor
+ * afterward.
+ *
+ *
+ * Buffer Management
+ * =================
+ *
+ * OpenFlow messages for flow monitor notifications can overflow the buffer
+ * space available to the switch, either temporarily (e.g. due to network
+ * conditions slowing OpenFlow traffic) or more permanently (e.g. the sustained
+ * rate of flow table change exceeds the network bandwidth between switch and
+ * controller).
+ *
+ * When Open vSwitch's notification buffer space reaches a limiting threshold,
+ * OVS reacts as follows:
+ *
+ * 1. OVS sends an NXT_FLOW_MONITOR_PAUSED message to the controller, following
+ * all the already queued notifications. After it receives this message,
+ * the controller knows that its view of the flow table, as represented by
+ * flow monitor notifications, is incomplete.
+ *
+ * 2. As long as the notification buffer is not empty:
+ *
+ * - NXMFE_ADD and NXFME_MODIFIED notifications will not be sent.
+ *
+ * - NXFME_DELETED notifications will still be sent, but only for flows
+ * that existed before OVS sent NXT_FLOW_MONITOR_PAUSED.
+ *
+ * - NXFME_ABBREV notifications will not be sent. They are treated as
+ * the expanded version (and therefore only the NXFME_DELETED
+ * components, if any, are sent).
+ *
+ * 3. When the notification buffer empties, OVS sends NXFME_ADD notifications
+ * for flows added since the buffer reached its limit and NXFME_MODIFIED
+ * notifications for flows that existed before the limit was reached and
+ * changed after the limit was reached.
+ *
+ * 4. OVS sends an NXT_FLOW_MONITOR_RESUMED message to the controller. After
+ * it receives this message, the controller knows that its view of the flow
+ * table, as represented by flow monitor notifications, is again complete.
+ *
+ * This allows the maximum buffer space requirement for notifications to be
+ * bounded by the limit plus the maximum number of supported flows.
+ *
+ *
+ * "Flow Removed" messages
+ * =======================
+ *
+ * The flow monitor mechanism is independent of OFPT_FLOW_REMOVED and
+ * NXT_FLOW_REMOVED. Flow monitor updates for deletion are sent if
+ * NXFMF_DELETE is set on a monitor, regardless of whether the
+ * OFPFF_SEND_FLOW_REM flag was set when the flow was added. */
+
+/* NXST_FLOW_MONITOR request.
+ *
+ * The NXST_FLOW_MONITOR request's body consists of an array of zero or more
+ * instances of this structure. The request arranges to monitor the flows
+ * that match the specified criteria, which are interpreted in the same way as
+ * for NXST_FLOW.
+ *
+ * 'id' identifies a particular monitor for the purpose of allowing it to be
+ * canceled later with NXT_FLOW_MONITOR_CANCEL. 'id' must be unique among
+ * existing monitors that have not already been canceled.
+ *
+ * The reply includes the initial flow matches for monitors that have the
+ * NXFMF_INITIAL flag set. No single flow will be included in the reply more
+ * than once, even if more than one requested monitor matches that flow. The
+ * reply will be empty if none of the monitors has NXFMF_INITIAL set or if none
+ * of the monitors initially matches any flows.
+ *
+ * For NXFMF_ADD, an event will be reported if 'out_port' matches against the
+ * actions of the flow being added or, for a flow that is replacing an existing
+ * flow, if 'out_port' matches against the actions of the flow being replaced.
+ * For NXFMF_DELETE, 'out_port' matches against the actions of a flow being
+ * deleted. For NXFMF_MODIFY, an event will be reported if 'out_port' matches
+ * either the old or the new actions. */
+struct nx_flow_monitor_request {
+ ovs_be32 id; /* Controller-assigned ID for this monitor. */
+ ovs_be16 flags; /* NXFMF_*. */
+ ovs_be16 out_port; /* Required output port, if not OFPP_NONE. */
+ ovs_be16 match_len; /* Length of nx_match. */
+ uint8_t table_id; /* One table's ID or 0xff for all tables. */
+ uint8_t zeros[5]; /* Align to 64 bits (must be zero). */
+ /* Followed by:
+ * - Exactly match_len (possibly 0) bytes containing the nx_match, then
+ * - Exactly (match_len + 7)/8*8 - match_len (between 0 and 7) bytes of
+ * all-zero bytes. */
+};
+OFP_ASSERT(sizeof(struct nx_flow_monitor_request) == 16);
+
+/* 'flags' bits in struct nx_flow_monitor_request. */
+enum nx_flow_monitor_flags {
+ /* When to send updates. */
+ NXFMF_INITIAL = 1 << 0, /* Initially matching flows. */
+ NXFMF_ADD = 1 << 1, /* New matching flows as they are added. */
+ NXFMF_DELETE = 1 << 2, /* Old matching flows as they are removed. */
+ NXFMF_MODIFY = 1 << 3, /* Matching flows as they are changed. */
+
+ /* What to include in updates. */
+ NXFMF_ACTIONS = 1 << 4, /* If set, actions are included. */
+ NXFMF_OWN = 1 << 5, /* If set, include own changes in full. */
+};
+
+/* NXST_FLOW_MONITOR reply header.
+ *
+ * The body of an NXST_FLOW_MONITOR reply is an array of variable-length
+ * structures, each of which begins with this header. The 'length' member may
+ * be used to traverse the array, and the 'event' member may be used to
+ * determine the particular structure.
+ *
+ * Every instance is a multiple of 8 bytes long. */
+struct nx_flow_update_header {
+ ovs_be16 length; /* Length of this entry. */
+ ovs_be16 event; /* One of NXFME_*. */
+ /* ...other data depending on 'event'... */
+};
+OFP_ASSERT(sizeof(struct nx_flow_update_header) == 4);
+
+/* 'event' values in struct nx_flow_update_header. */
+enum nx_flow_update_event {
+ /* struct nx_flow_update_full. */
+ NXFME_ADDED = 0, /* Flow was added. */
+ NXFME_DELETED = 1, /* Flow was deleted. */
+ NXFME_MODIFIED = 2, /* Flow (generally its actions) was changed. */
+
+ /* struct nx_flow_update_abbrev. */
+ NXFME_ABBREV = 3, /* Abbreviated reply. */
+};
+
+/* NXST_FLOW_MONITOR reply for NXFME_ADDED, NXFME_DELETED, and
+ * NXFME_MODIFIED. */
+struct nx_flow_update_full {
+ ovs_be16 length; /* Length is 24. */
+ ovs_be16 event; /* One of NXFME_*. */
+ ovs_be16 reason; /* OFPRR_* for NXFME_DELETED, else zero. */
+ ovs_be16 priority; /* Priority of the entry. */
+ ovs_be16 idle_timeout; /* Number of seconds idle before expiration. */
+ ovs_be16 hard_timeout; /* Number of seconds before expiration. */
+ ovs_be16 match_len; /* Length of nx_match. */
+ uint8_t table_id; /* ID of flow's table. */
+ uint8_t pad; /* Reserved, currently zeroed. */
+ ovs_be64 cookie; /* Opaque controller-issued identifier. */
+ /* Followed by:
+ * - Exactly match_len (possibly 0) bytes containing the nx_match, then
+ * - Exactly (match_len + 7)/8*8 - match_len (between 0 and 7) bytes of
+ * all-zero bytes, then
+ * - Actions to fill out the remainder 'length' bytes (always a multiple
+ * of 8). If NXFMF_ACTIONS was not specified, or 'event' is
+ * NXFME_DELETED, no actions are included.
+ */
+};
+OFP_ASSERT(sizeof(struct nx_flow_update_full) == 24);
+
+/* NXST_FLOW_MONITOR reply for NXFME_ABBREV.
+ *
+ * When the controller does not specify NXFMF_OWN in a monitor request, any
+ * flow tables changes due to the controller's own requests (on the same
+ * OpenFlow channel) will be abbreviated, when possible, to this form, which
+ * simply specifies the 'xid' of the OpenFlow request (e.g. an OFPT_FLOW_MOD or
+ * NXT_FLOW_MOD) that caused the change.
+ *
+ * Some changes cannot be abbreviated and will be sent in full:
+ *
+ * - Changes that only partially succeed. This can happen if, for example,
+ * a flow_mod with type OFPFC_MODIFY affects multiple flows, but only some
+ * of those modifications succeed (e.g. due to hardware limitations).
+ *
+ * This cannot occur with the current implementation of the Open vSwitch
+ * software datapath. It could happen with other datapath implementations.
+ *
+ * - Changes that race with conflicting changes made by other controllers or
+ * other flow_mods (not separated by barriers) by the same controller.
+ *
+ * This cannot occur with the current Open vSwitch implementation
+ * (regardless of datapath) because Open vSwitch internally serializes
+ * potentially conflicting changes.
+ *
+ * A flow_mod that does not change the flow table will not trigger any
+ * notification, even an abbreviated one. For example, a "modify" or "delete"
+ * flow_mod that does not match any flows will not trigger a notification.
+ * Whether an "add" or "modify" that specifies all the same parameters that a
+ * flow already has triggers a notification is unspecified and subject to
+ * change in future versions of Open vSwitch.
+ *
+ * OVS will always send the notifications for a given flow table change before
+ * the reply to a OFPT_BARRIER_REQUEST request that follows the flow table
+ * change. Thus, if the controller does not receive an abbreviated (or
+ * unabbreviated) notification for a flow_mod before the next
+ * OFPT_BARRIER_REPLY, it will never receive one. */
+struct nx_flow_update_abbrev {
+ ovs_be16 length; /* Length is 8. */
+ ovs_be16 event; /* NXFME_ABBREV. */
+ ovs_be32 xid; /* Controller-specified xid from flow_mod. */
+};
+OFP_ASSERT(sizeof(struct nx_flow_update_abbrev) == 8);
+
+/* NXT_FLOW_MONITOR_CANCEL.
+ *
+ * Used by a controller to cancel an outstanding monitor. */
+struct nx_flow_monitor_cancel {
+ ovs_be32 id; /* 'id' from nx_flow_monitor_request. */
+};
+OFP_ASSERT(sizeof(struct nx_flow_monitor_cancel) == 4);
+
+/* Action structure for NXAST_WRITE_METADATA.
+ *
+ * Modifies the 'mask' bits of the metadata value. */
+struct nx_action_write_metadata {
+ ovs_be16 type; /* OFPAT_VENDOR. */
+ ovs_be16 len; /* Length is 32. */
+ ovs_be32 vendor; /* NX_VENDOR_ID. */
+ ovs_be16 subtype; /* NXAST_WRITE_METADATA. */
+ uint8_t zeros[6]; /* Must be zero. */
+ ovs_be64 metadata; /* Metadata register. */
+ ovs_be64 mask; /* Metadata mask. */
+};
+OFP_ASSERT(sizeof(struct nx_action_write_metadata) == 32);
+
+/* Action structure for NXAST_PUSH_MPLS. */
+struct nx_action_push_mpls {
+ ovs_be16 type; /* OFPAT_VENDOR. */
+ ovs_be16 len; /* Length is 8. */
+ ovs_be32 vendor; /* NX_VENDOR_ID. */
+ ovs_be16 subtype; /* NXAST_PUSH_MPLS. */
+ ovs_be16 ethertype; /* Ethertype */
+ uint8_t pad[4];
+};
+OFP_ASSERT(sizeof(struct nx_action_push_mpls) == 16);
+
+/* Action structure for NXAST_POP_MPLS. */
+struct nx_action_pop_mpls {
+ ovs_be16 type; /* OFPAT_VENDOR. */
+ ovs_be16 len; /* Length is 8. */
+ ovs_be32 vendor; /* NX_VENDOR_ID. */
+ ovs_be16 subtype; /* NXAST_POP_MPLS. */
+ ovs_be16 ethertype; /* Ethertype */
+ uint8_t pad[4];
+};
+OFP_ASSERT(sizeof(struct nx_action_pop_mpls) == 16);
+
+/* Action structure for NXAST_SET_MPLS_LABEL. */
+struct nx_action_mpls_label {
+ ovs_be16 type; /* OFPAT_VENDOR. */
+ ovs_be16 len; /* Length is 8. */
+ ovs_be32 vendor; /* NX_VENDOR_ID. */
+ ovs_be16 subtype; /* NXAST_SET_MPLS_LABEL. */
+ uint8_t zeros[2]; /* Must be zero. */
+ ovs_be32 label; /* LABEL */
+};
+OFP_ASSERT(sizeof(struct nx_action_mpls_label) == 16);
+
+/* Action structure for NXAST_SET_MPLS_TC. */
+struct nx_action_mpls_tc {
+ ovs_be16 type; /* OFPAT_VENDOR. */
+ ovs_be16 len; /* Length is 8. */
+ ovs_be32 vendor; /* NX_VENDOR_ID. */
+ ovs_be16 subtype; /* NXAST_SET_MPLS_TC. */
+ uint8_t tc; /* TC */
+ uint8_t pad[5];
+};
+OFP_ASSERT(sizeof(struct nx_action_mpls_tc) == 16);
+
+/* Action structure for NXAST_SET_MPLS_TTL. */
+struct nx_action_mpls_ttl {
+ ovs_be16 type; /* OFPAT_VENDOR. */
+ ovs_be16 len; /* Length is 8. */
+ ovs_be32 vendor; /* NX_VENDOR_ID. */
+ ovs_be16 subtype; /* NXAST_SET_MPLS_TTL. */
+ uint8_t ttl; /* TTL */
+ uint8_t pad[5];
+};
+OFP_ASSERT(sizeof(struct nx_action_mpls_ttl) == 16);
+
+/* Action structure for NXAST_SAMPLE.
+ *
+ * Samples matching packets with the given probability and sends them
+ * each to the set of collectors identified with the given ID. The
+ * probability is expressed as a number of packets to be sampled out
+ * of USHRT_MAX packets, and must be >0.
+ *
+ * When sending packet samples to IPFIX collectors, the IPFIX flow
+ * record sent for each sampled packet is associated with the given
+ * observation domain ID and observation point ID. Each IPFIX flow
+ * record contain the sampled packet's headers when executing this
+ * rule. If a sampled packet's headers are modified by previous
+ * actions in the flow, those modified headers are sent. */
+struct nx_action_sample {
+ ovs_be16 type; /* OFPAT_VENDOR. */
+ ovs_be16 len; /* Length is 24. */
+ ovs_be32 vendor; /* NX_VENDOR_ID. */
+ ovs_be16 subtype; /* NXAST_SAMPLE. */
+ ovs_be16 probability; /* Fraction of packets to sample. */
+ ovs_be32 collector_set_id; /* ID of collector set in OVSDB. */
+ ovs_be32 obs_domain_id; /* ID of sampling observation domain. */
+ ovs_be32 obs_point_id; /* ID of sampling observation point. */
+};
+OFP_ASSERT(sizeof(struct nx_action_sample) == 24);
#endif /* openflow/nicira-ext.h */