-/* Copyright (c) 2008, 2011 The Board of Trustees of The Leland Stanford
+/* Copyright (c) 2008, 2011, 2012 The Board of Trustees of The Leland Stanford
* Junior University
*
* We are making the OpenFlow specification and associated documentation
*/
/*
- * Copyright (c) 2008, 2009, 2010, 2011 Nicira Networks.
+ * Copyright (c) 2008, 2009, 2010, 2011 Nicira, Inc.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
/* The most significant bit being set in the version field indicates an
* experimental OpenFlow version.
*/
-#define OFP10_VERSION 0x01
-#define OFP11_VERSION 0x02
+enum ofp_version {
+ OFP10_VERSION = 0x01,
+ OFP11_VERSION = 0x02,
+ OFP12_VERSION = 0x03,
+ OFP13_VERSION = 0x04
+};
#define OFP_MAX_TABLE_NAME_LEN 32
#define OFP_MAX_PORT_NAME_LEN 16
#define OFP_ETH_ALEN 6 /* Bytes in an Ethernet address. */
-/* Common OpenFlow message types. */
-enum ofp_type {
- /* Immutable messages. */
- OFPT_HELLO, /* Symmetric message */
- OFPT_ERROR, /* Symmetric message */
- OFPT_ECHO_REQUEST, /* Symmetric message */
- OFPT_ECHO_REPLY, /* Symmetric message */
- OFPT_VENDOR, /* Symmetric message */
+#define OFP_DEFAULT_MISS_SEND_LEN 128
- /* Switch configuration messages. */
- OFPT_FEATURES_REQUEST, /* Controller/switch message */
- OFPT_FEATURES_REPLY, /* Controller/switch message */
- OFPT_GET_CONFIG_REQUEST, /* Controller/switch message */
- OFPT_GET_CONFIG_REPLY, /* Controller/switch message */
- OFPT_SET_CONFIG, /* Controller/switch message */
+/* Values below this cutoff are 802.3 packets and the two bytes
+ * following MAC addresses are used as a frame length. Otherwise, the
+ * two bytes are used as the Ethernet type.
+ */
+#define OFP_DL_TYPE_ETH2_CUTOFF 0x0600
+
+/* Value of dl_type to indicate that the frame does not include an
+ * Ethernet type.
+ */
+#define OFP_DL_TYPE_NOT_ETH_TYPE 0x05ff
+
+/* Value used in "idle_timeout" and "hard_timeout" to indicate that the entry
+ * is permanent. */
+#define OFP_FLOW_PERMANENT 0
+
+/* By default, choose a priority in the middle. */
+#define OFP_DEFAULT_PRIORITY 0x8000
- /* Asynchronous messages. */
- OFPT_PACKET_IN, /* Async message */
- OFPT_FLOW_REMOVED, /* Async message */
- OFPT_PORT_STATUS, /* Async message */
-};
/* Header on all OpenFlow packets. */
struct ofp_header {
};
OFP_ASSERT(sizeof(struct ofp_header) == 8);
+/* OFPT_ERROR: Error message (datapath -> controller). */
+struct ofp_error_msg {
+ ovs_be16 type;
+ ovs_be16 code;
+ uint8_t data[0]; /* Variable-length data. Interpreted based
+ on the type and code. */
+};
+OFP_ASSERT(sizeof(struct ofp_error_msg) == 4);
+
+enum ofp_config_flags {
+ /* Handling of IP fragments. */
+ OFPC_FRAG_NORMAL = 0, /* No special handling for fragments. */
+ OFPC_FRAG_DROP = 1, /* Drop fragments. */
+ OFPC_FRAG_REASM = 2, /* Reassemble (only if OFPC_IP_REASM set). */
+ OFPC_FRAG_NX_MATCH = 3, /* Make first fragments available for matching. */
+ OFPC_FRAG_MASK = 3,
+
+ /* OFPC_INVALID_TTL_TO_CONTROLLER is deprecated in OpenFlow 1.3 */
+
+ /* TTL processing - applicable for IP and MPLS packets. */
+ OFPC_INVALID_TTL_TO_CONTROLLER = 1 << 2, /* Send packets with invalid TTL
+ to the controller. */
+};
+
+/* Switch configuration. */
+struct ofp_switch_config {
+ ovs_be16 flags; /* OFPC_* flags. */
+ ovs_be16 miss_send_len; /* Max bytes of new flow that datapath should
+ send to the controller. */
+};
+OFP_ASSERT(sizeof(struct ofp_switch_config) == 4);
+
+
/* Common flags to indicate behavior of the physical port. These flags are
* used in ofp_port to describe the current configuration. They are used in
* the ofp_port_mod message to configure the port's behavior.
/* Switch features. */
struct ofp_switch_features {
- struct ofp_header header;
ovs_be64 datapath_id; /* Datapath unique ID. The lower 48-bits are for
a MAC address, while the upper 16-bits are
implementer-defined. */
ovs_be32 n_buffers; /* Max packets buffered at once. */
uint8_t n_tables; /* Number of tables supported by datapath. */
- uint8_t pad[3]; /* Align to 64-bits. */
+ uint8_t auxiliary_id; /* OF 1.3: Identify auxiliary connections */
+ uint8_t pad[2]; /* Align to 64-bits. */
/* Features. */
- ovs_be32 capabilities; /* OFPC_*, OFPC10_*, OFPC11_*. */
- ovs_be32 actions; /* Bitmap of supported "ofp_action_type"s. */
+ ovs_be32 capabilities; /* OFPC_*, OFPC10_*, OFPC11_*, OFPC12_*. */
+ ovs_be32 actions; /* Bitmap of supported "ofp_action_type"s.
+ * DEPRECATED in OpenFlow 1.1 */
/* Followed by an array of struct ofp10_phy_port or struct ofp11_port
- * structures. The number is inferred from header.length. */
+ * structures. The number is inferred from header.length.
+ * REMOVED in OpenFlow 1.3 */
};
-OFP_ASSERT(sizeof(struct ofp_switch_features) == 32);
+OFP_ASSERT(sizeof(struct ofp_switch_features) == 24);
/* Common capabilities supported by the datapath (struct ofp_switch_features,
* member capabilities). */
OFPR_N_REASONS
};
+enum ofp_flow_mod_command {
+ OFPFC_ADD, /* New flow. */
+ OFPFC_MODIFY, /* Modify all matching flows. */
+ OFPFC_MODIFY_STRICT, /* Modify entry strictly matching wildcards */
+ OFPFC_DELETE, /* Delete all matching flows. */
+ OFPFC_DELETE_STRICT /* Strictly match wildcards and priority. */
+};
+
+enum ofp_flow_mod_flags {
+ OFPFF_SEND_FLOW_REM = 1 << 0, /* Send flow removed message when flow
+ * expires or is deleted. */
+ OFPFF_CHECK_OVERLAP = 1 << 1, /* Check for overlapping entries first. */
+};
+
+/* Action header for OFPAT10_VENDOR and OFPAT11_EXPERIMEMNTER.
+ * The rest of the body is vendor-defined. */
+struct ofp_action_vendor_header {
+ ovs_be16 type; /* OFPAT10_VENDOR. */
+ ovs_be16 len; /* Length is a multiple of 8. */
+ ovs_be32 vendor; /* Vendor ID, which takes the same form
+ as in "struct ofp_vendor_header". */
+};
+OFP_ASSERT(sizeof(struct ofp_action_vendor_header) == 8);
+
+/* Action header that is common to all actions. The length includes the
+ * header and any padding used to make the action 64-bit aligned.
+ * NB: The length of an action *must* always be a multiple of eight. */
+struct ofp_action_header {
+ ovs_be16 type; /* One of OFPAT10_*. */
+ ovs_be16 len; /* Length of action, including this
+ header. This is the length of action,
+ including any padding to make it
+ 64-bit aligned. */
+ uint8_t pad[4];
+};
+OFP_ASSERT(sizeof(struct ofp_action_header) == 8);
+
+/* Action structure for OFPAT10_SET_VLAN_VID and OFPAT11_SET_VLAN_VID. */
+struct ofp_action_vlan_vid {
+ ovs_be16 type; /* Type. */
+ ovs_be16 len; /* Length is 8. */
+ ovs_be16 vlan_vid; /* VLAN id. */
+ uint8_t pad[2];
+};
+OFP_ASSERT(sizeof(struct ofp_action_vlan_vid) == 8);
+
+/* Action structure for OFPAT10_SET_VLAN_PCP and OFPAT11_SET_VLAN_PCP. */
+struct ofp_action_vlan_pcp {
+ ovs_be16 type; /* Type. */
+ ovs_be16 len; /* Length is 8. */
+ uint8_t vlan_pcp; /* VLAN priority. */
+ uint8_t pad[3];
+};
+OFP_ASSERT(sizeof(struct ofp_action_vlan_pcp) == 8);
+
+/* Action structure for OFPAT10_SET_DL_SRC/DST and OFPAT11_SET_DL_SRC/DST. */
+struct ofp_action_dl_addr {
+ ovs_be16 type; /* Type. */
+ ovs_be16 len; /* Length is 16. */
+ uint8_t dl_addr[OFP_ETH_ALEN]; /* Ethernet address. */
+ uint8_t pad[6];
+};
+OFP_ASSERT(sizeof(struct ofp_action_dl_addr) == 16);
+
+/* Action structure for OFPAT10_SET_NW_SRC/DST and OFPAT11_SET_NW_SRC/DST. */
+struct ofp_action_nw_addr {
+ ovs_be16 type; /* Type. */
+ ovs_be16 len; /* Length is 8. */
+ ovs_be32 nw_addr; /* IP address. */
+};
+OFP_ASSERT(sizeof(struct ofp_action_nw_addr) == 8);
+
+/* Action structure for OFPAT10_SET_NW_TOS and OFPAT11_SET_NW_TOS. */
+struct ofp_action_nw_tos {
+ ovs_be16 type; /* Type.. */
+ ovs_be16 len; /* Length is 8. */
+ uint8_t nw_tos; /* DSCP in high 6 bits, rest ignored. */
+ uint8_t pad[3];
+};
+OFP_ASSERT(sizeof(struct ofp_action_nw_tos) == 8);
+
+/* Action structure for OFPAT10_SET_TP_SRC/DST and OFPAT11_SET_TP_SRC/DST. */
+struct ofp_action_tp_port {
+ ovs_be16 type; /* Type. */
+ ovs_be16 len; /* Length is 8. */
+ ovs_be16 tp_port; /* TCP/UDP port. */
+ uint8_t pad[2];
+};
+OFP_ASSERT(sizeof(struct ofp_action_tp_port) == 8);
+
/* Why was this flow removed? */
enum ofp_flow_removed_reason {
OFPRR_IDLE_TIMEOUT, /* Flow idle time exceeded idle_timeout. */
OFPRR_HARD_TIMEOUT, /* Time exceeded hard_timeout. */
- OFPRR_DELETE /* Evicted by a DELETE flow mod. */
+ OFPRR_DELETE, /* Evicted by a DELETE flow mod. */
+ OFPRR_GROUP_DELETE, /* Group was removed. */
+ OFPRR_EVICTION, /* Switch eviction to free resources. */
+ OFPRR_METER_DELETE, /* Meter was removed. */
};
/* What changed about the physical port */
/* A physical port has changed in the datapath */
struct ofp_port_status {
- struct ofp_header header;
uint8_t reason; /* One of OFPPR_*. */
uint8_t pad[7]; /* Align to 64-bits. */
/* Followed by struct ofp10_phy_port or struct ofp11_port. */
};
-OFP_ASSERT(sizeof(struct ofp_port_status) == 16);
+OFP_ASSERT(sizeof(struct ofp_port_status) == 8);
+
+enum ofp_stats_reply_flags {
+ OFPSF_REPLY_MORE = 1 << 0 /* More replies to follow. */
+};
+
+#define DESC_STR_LEN 256
+#define SERIAL_NUM_LEN 32
+/* Body of reply to OFPST_DESC request. Each entry is a NULL-terminated ASCII
+ * string. */
+struct ofp_desc_stats {
+ char mfr_desc[DESC_STR_LEN]; /* Manufacturer description. */
+ char hw_desc[DESC_STR_LEN]; /* Hardware description. */
+ char sw_desc[DESC_STR_LEN]; /* Software description. */
+ char serial_num[SERIAL_NUM_LEN]; /* Serial number. */
+ char dp_desc[DESC_STR_LEN]; /* Human readable description of
+ the datapath. */
+};
+OFP_ASSERT(sizeof(struct ofp_desc_stats) == 1056);
+
+/* Reply to OFPST_AGGREGATE request. */
+struct ofp_aggregate_stats_reply {
+ ovs_32aligned_be64 packet_count; /* Number of packets in flows. */
+ ovs_32aligned_be64 byte_count; /* Number of bytes in flows. */
+ ovs_be32 flow_count; /* Number of flows. */
+ uint8_t pad[4]; /* Align to 64 bits. */
+};
+OFP_ASSERT(sizeof(struct ofp_aggregate_stats_reply) == 24);
+
+/* The match type indicates the match structure (set of fields that compose the
+ * match) in use. The match type is placed in the type field at the beginning
+ * of all match structures. The "OpenFlow Extensible Match" type corresponds
+ * to OXM TLV format described below and must be supported by all OpenFlow
+ * switches. Extensions that define other match types may be published on the
+ * ONF wiki. Support for extensions is optional.
+ */
+enum ofp_match_type {
+ OFPMT_STANDARD = 0, /* The match fields defined in the ofp11_match
+ structure apply */
+ OFPMT_OXM = 1, /* OpenFlow Extensible Match */
+};
+
+/* Group numbering. Groups can use any number up to OFPG_MAX. */
+enum ofp_group {
+ /* Last usable group number. */
+ OFPG_MAX = 0xffffff00,
+
+ /* Fake groups. */
+ OFPG_ALL = 0xfffffffc, /* All groups, for group delete commands. */
+ OFPG_ANY = 0xffffffff /* Wildcard, for flow stats requests. */
+};
+
+enum ofp_hello_elem_type {
+ OFPHET_VERSIONBITMAP = 1, /* Bitmap of version supported. */
+};
+
+/* Common header for all Hello Elements */
+struct ofp_hello_elem_header {
+ ovs_be16 type; /* One of OFPHET_*. */
+ ovs_be16 length; /* Length in bytes of this element. */
+};
+OFP_ASSERT(sizeof(struct ofp_hello_elem_header) == 4);
+
+/* Vendor extension. */
+struct ofp_vendor_header {
+ struct ofp_header header; /* Type OFPT_VENDOR or OFPT_EXPERIMENTER. */
+ ovs_be32 vendor; /* Vendor ID:
+ * - MSB 0: low-order bytes are IEEE OUI.
+ * - MSB != 0: defined by OpenFlow
+ * consortium. */
+ /* Vendor-defined arbitrary additional data. */
+};
+OFP_ASSERT(sizeof(struct ofp_vendor_header) == 12);
#endif /* openflow/openflow-common.h */
git://git.onelab.eu / sliver-openvswitch.git / blobdiff