+++ /dev/null
-# -*-Shell-script-*-
-#
-# Thierry, jan 17 2013
-# this file was put together by Jordan to provide the same interface as
-# /etc/init.d/functions on fedora systems
-# (probably is extracted from one of the fedora releases as is, not sure about that)
-#
-# we unconditionnally ship this as /etc/init.d/functions.sfa,
-# and then our own initscript (init.d/sfa) does source that
-# conditionnally, i.e. when run on debian systems
-####################
-#
-# functions This file contains functions to be used by most or all
-# shell scripts in the /etc/init.d directory.
-#
-
-TEXTDOMAIN=initscripts
-
-# Make sure umask is sane
-umask 022
-
-# Set up a default search path.
-PATH="/sbin:/usr/sbin:/bin:/usr/bin"
-export PATH
-
-if [ $PPID -ne 1 -a -z "$SYSTEMCTL_SKIP_REDIRECT" ] && \
- ( /bin/mountpoint -q /cgroup/systemd || /bin/mountpoint -q /sys/fs/cgroup/systemd ) ; then
- case "$0" in
- /etc/init.d/*|/etc/rc.d/init.d/*)
- _use_systemctl=1
- ;;
- esac
-fi
-
-# ubuntu does not have /bin/systemctl
-[ -f /bin/systemctl ] || _use_systemctl=0
-
-
-systemctl_redirect () {
- local s
- local prog=${1##*/}
- local command=$2
-
- case "$command" in
- start)
- s=$"Starting $prog (via systemctl): "
- ;;
- stop)
- s=$"Stopping $prog (via systemctl): "
- ;;
- reload|try-reload)
- s=$"Reloading $prog configuration (via systemctl): "
- ;;
- restart|try-restart|condrestart)
- s=$"Restarting $prog (via systemctl): "
- ;;
- esac
-
- action "$s" /bin/systemctl $command "$prog.service"
-}
-
-# Get a sane screen width
-[ -z "${COLUMNS:-}" ] && COLUMNS=80
-
-#if [ -z "${CONSOLETYPE:-}" ]; then
-# if [ -r "/dev/stderr" ]; then
-# CONSOLETYPE="$(/sbin/consoletype < /dev/stderr)"
-# else
-# CONSOLETYPE="$(/sbin/consoletype)"
-# fi
-#fi
-
-if [ -z "${NOLOCALE:-}" ] && [ -z "${LANGSH_SOURCED:-}" ] && [ -f /etc/sysconfig/i18n ] ; then
- . /etc/profile.d/lang.sh 2>/dev/null
- # avoid propagating LANGSH_SOURCED any further
- unset LANGSH_SOURCED
-fi
-
-# Read in our configuration
-if [ -z "${BOOTUP:-}" ]; then
- if [ -f /etc/sysconfig/init ]; then
- . /etc/sysconfig/init
- else
- # This all seem confusing? Look in /etc/sysconfig/init,
- # or in /usr/doc/initscripts-*/sysconfig.txt
- BOOTUP=color
- RES_COL=60
- MOVE_TO_COL="echo -en \\033[${RES_COL}G"
- SETCOLOR_SUCCESS="echo -en \\033[1;32m"
- SETCOLOR_FAILURE="echo -en \\033[1;31m"
- SETCOLOR_WARNING="echo -en \\033[1;33m"
- SETCOLOR_NORMAL="echo -en \\033[0;39m"
- LOGLEVEL=1
- fi
- if [ "$CONSOLETYPE" = "serial" ]; then
- BOOTUP=serial
- MOVE_TO_COL=
- SETCOLOR_SUCCESS=
- SETCOLOR_FAILURE=
- SETCOLOR_WARNING=
- SETCOLOR_NORMAL=
- fi
-fi
-
-# Interpret escape sequences in an fstab entry
-fstab_decode_str() {
- fstab-decode echo "$1"
-}
-
-# Check if any of $pid (could be plural) are running
-checkpid() {
- local i
-
- for i in $* ; do
- [ -d "/proc/$i" ] && return 0
- done
- return 1
-}
-
-__readlink() {
- ls -bl "$@" 2>/dev/null| awk '{ print $NF }'
-}
-
-__fgrep() {
- s=$1
- f=$2
- while read line; do
- if strstr "$line" "$s"; then
- echo $line
- return 0
- fi
- done < $f
- return 1
-}
-
-# __umount_loop awk_program fstab_file first_msg retry_msg umount_args
-# awk_program should process fstab_file and return a list of fstab-encoded
-# paths; it doesn't have to handle comments in fstab_file.
-__umount_loop() {
- local remaining sig=
- local retry=3 count
-
- remaining=$(LC_ALL=C awk "/^#/ {next} $1" "$2" | sort -r)
- while [ -n "$remaining" -a "$retry" -gt 0 ]; do
- if [ "$retry" -eq 3 ]; then
- action "$3" fstab-decode umount $5 $remaining
- else
- action "$4" fstab-decode umount $5 $remaining
- fi
- count=4
- remaining=$(LC_ALL=C awk "/^#/ {next} $1" "$2" | sort -r)
- while [ "$count" -gt 0 ]; do
- [ -z "$remaining" ] && break
- count=$(($count-1))
- # jordan # usleep 500000
- sleep 0.5
- remaining=$(LC_ALL=C awk "/^#/ {next} $1" "$2" | sort -r)
- done
- [ -z "$remaining" ] && break
- fstab-decode /sbin/fuser -k -m $sig $remaining >/dev/null
- sleep 3
- retry=$(($retry -1))
- sig=-9
- done
-}
-
-# Similar to __umount loop above, specialized for loopback devices
-__umount_loopback_loop() {
- local remaining devremaining sig=
- local retry=3
-
- remaining=$(awk '$1 ~ /^\/dev\/loop/ && $2 != "/" {print $2}' /proc/mounts)
- devremaining=$(awk '$1 ~ /^\/dev\/loop/ && $2 != "/" {print $1}' /proc/mounts)
- while [ -n "$remaining" -a "$retry" -gt 0 ]; do
- if [ "$retry" -eq 3 ]; then
- action $"Unmounting loopback filesystems: " \
- fstab-decode umount $remaining
- else
- action $"Unmounting loopback filesystems (retry):" \
- fstab-decode umount $remaining
- fi
- for dev in $devremaining ; do
- losetup $dev > /dev/null 2>&1 && \
- action $"Detaching loopback device $dev: " \
- losetup -d $dev
- done
- remaining=$(awk '$1 ~ /^\/dev\/loop/ && $2 != "/" {print $2}' /proc/mounts)
- devremaining=$(awk '$1 ~ /^\/dev\/loop/ && $2 != "/" {print $1}' /proc/mounts)
- [ -z "$remaining" ] && break
- fstab-decode /sbin/fuser -k -m $sig $remaining >/dev/null
- sleep 3
- retry=$(($retry -1))
- sig=-9
- done
-}
-
-# __proc_pids {program} [pidfile]
-# Set $pid to pids from /var/run* for {program}. $pid should be declared
-# local in the caller.
-# Returns LSB exit code for the 'status' action.
-__pids_var_run() {
- local base=${1##*/}
- local pid_file=${2:-/var/run/$base.pid}
-
- pid=
- if [ -f "$pid_file" ] ; then
- local line p
-
- [ ! -r "$pid_file" ] && return 4 # "user had insufficient privilege"
- while : ; do
- read line
- [ -z "$line" ] && break
- for p in $line ; do
- [ -z "${p//[0-9]/}" ] && [ -d "/proc/$p" ] && pid="$pid $p"
- done
- done < "$pid_file"
-
- if [ -n "$pid" ]; then
- return 0
- fi
- return 1 # "Program is dead and /var/run pid file exists"
- fi
- return 3 # "Program is not running"
-}
-
-# Output PIDs of matching processes, found using pidof
-__pids_pidof() {
- pidof -c -o $$ -o $PPID -o %PPID -x "$1" || \
- pidof -c -o $$ -o $PPID -o %PPID -x "${1##*/}"
-# jordan # pidof -c -m -o $$ -o $PPID -o %PPID -x "$1" || \
-# jordan # pidof -c -m -o $$ -o $PPID -o %PPID -x "${1##*/}"
-}
-
-
-# A function to start a program.
-daemon() {
- # Test syntax.
- local gotbase= force= nicelevel corelimit
- local pid base= user= nice= bg= pid_file=
- local cgroup=
- nicelevel=0
- while [ "$1" != "${1##[-+]}" ]; do
- case $1 in
- '') echo $"$0: Usage: daemon [+/-nicelevel] {program}"
- return 1;;
- --check)
- base=$2
- gotbase="yes"
- shift 2
- ;;
- --check=?*)
- base=${1#--check=}
- gotbase="yes"
- shift
- ;;
- --user)
- user=$2
- shift 2
- ;;
- --user=?*)
- user=${1#--user=}
- shift
- ;;
- --pidfile)
- pid_file=$2
- shift 2
- ;;
- --pidfile=?*)
- pid_file=${1#--pidfile=}
- shift
- ;;
- --force)
- force="force"
- shift
- ;;
- [-+][0-9]*)
- nice="nice -n $1"
- shift
- ;;
- *) echo $"$0: Usage: daemon [+/-nicelevel] {program}"
- return 1;;
- esac
- done
-
- # Save basename.
- [ -z "$gotbase" ] && base=${1##*/}
-
- # See if it's already running. Look *only* at the pid file.
- __pids_var_run "$base" "$pid_file"
-
- [ -n "$pid" -a -z "$force" ] && return
-
- # make sure it doesn't core dump anywhere unless requested
- corelimit="ulimit -S -c ${DAEMON_COREFILE_LIMIT:-0}"
-
- # if they set NICELEVEL in /etc/sysconfig/foo, honor it
- [ -n "${NICELEVEL:-}" ] && nice="nice -n $NICELEVEL"
-
- # if they set CGROUP_DAEMON in /etc/sysconfig/foo, honor it
- if [ -n "${CGROUP_DAEMON}" ]; then
- if [ ! -x /bin/cgexec ]; then
- echo -n "Cgroups not installed"; warning
- echo
- else
- cgroup="/bin/cgexec";
- for i in $CGROUP_DAEMON; do
- cgroup="$cgroup -g $i";
- done
- fi
- fi
-
- # Echo daemon
- [ "${BOOTUP:-}" = "verbose" -a -z "${LSB:-}" ] && echo -n " $base"
-
- # And start it up.
- if [ -z "$user" ]; then
- $cgroup $nice /bin/bash -c "$corelimit >/dev/null 2>&1 ; $*"
- else
- $cgroup $nice runuser -s /bin/bash $user -c "$corelimit >/dev/null 2>&1 ; $*"
- fi
-
- [ "$?" -eq 0 ] && success $"$base startup" || failure $"$base startup"
-}
-
-# A function to stop a program.
-killproc() {
- local RC killlevel= base pid pid_file= delay
-
- RC=0; delay=3
- # Test syntax.
- if [ "$#" -eq 0 ]; then
- echo $"Usage: killproc [-p pidfile] [ -d delay] {program} [-signal]"
- return 1
- fi
- if [ "$1" = "-p" ]; then
- pid_file=$2
- shift 2
- fi
- if [ "$1" = "-d" ]; then
- delay=$2
- shift 2
- fi
-
-
- # check for second arg to be kill level
- [ -n "${2:-}" ] && killlevel=$2
-
- # Save basename.
- base=${1##*/}
-
- # Find pid.
- __pids_var_run "$1" "$pid_file"
- RC=$?
- if [ -z "$pid" ]; then
- if [ -z "$pid_file" ]; then
- pid="$(__pids_pidof "$1")"
- else
- [ "$RC" = "4" ] && { failure $"$base shutdown" ; return $RC ;}
- fi
- fi
-
- # Kill it.
- if [ -n "$pid" ] ; then
- [ "$BOOTUP" = "verbose" -a -z "${LSB:-}" ] && echo -n "$base "
- if [ -z "$killlevel" ] ; then
- if checkpid $pid 2>&1; then
- # TERM first, then KILL if not dead
- kill -TERM $pid >/dev/null 2>&1
- sleep 0.1
- # jordan # usleep 100000
- if checkpid $pid && sleep 1 &&
- checkpid $pid && sleep $delay &&
- checkpid $pid ; then
- kill -KILL $pid >/dev/null 2>&1
- sleep 0.1
- # jordan # usleep 100000
- fi
- fi
- checkpid $pid
- RC=$?
- [ "$RC" -eq 0 ] && failure $"$base shutdown" || success $"$base shutdown"
- RC=$((! $RC))
- # use specified level only
- else
- if checkpid $pid; then
- kill $killlevel $pid >/dev/null 2>&1
- RC=$?
- [ "$RC" -eq 0 ] && success $"$base $killlevel" || failure $"$base $killlevel"
- elif [ -n "${LSB:-}" ]; then
- RC=7 # Program is not running
- fi
- fi
- else
- if [ -n "${LSB:-}" -a -n "$killlevel" ]; then
- RC=7 # Program is not running
- else
- failure $"$base shutdown"
- RC=0
- fi
- fi
-
- # Remove pid file if any.
- if [ -z "$killlevel" ]; then
- rm -f "${pid_file:-/var/run/$base.pid}"
- fi
- return $RC
-}
-
-# A function to find the pid of a program. Looks *only* at the pidfile
-pidfileofproc() {
- local pid
-
- # Test syntax.
- if [ "$#" = 0 ] ; then
- echo $"Usage: pidfileofproc {program}"
- return 1
- fi
-
- __pids_var_run "$1"
- [ -n "$pid" ] && echo $pid
- return 0
-}
-
-# A function to find the pid of a program.
-pidofproc() {
- local RC pid pid_file=
-
- # Test syntax.
- if [ "$#" = 0 ]; then
- echo $"Usage: pidofproc [-p pidfile] {program}"
- return 1
- fi
- if [ "$1" = "-p" ]; then
- pid_file=$2
- shift 2
- fi
- fail_code=3 # "Program is not running"
-
- # First try "/var/run/*.pid" files
- __pids_var_run "$1" "$pid_file"
- RC=$?
- if [ -n "$pid" ]; then
- echo $pid
- return 0
- fi
-
- [ -n "$pid_file" ] && return $RC
- __pids_pidof "$1" || return $RC
-}
-
-status() {
- local base pid lock_file= pid_file=
-
- # Test syntax.
- if [ "$#" = 0 ] ; then
- echo $"Usage: status [-p pidfile] {program}"
- return 1
- fi
- if [ "$1" = "-p" ]; then
- pid_file=$2
- shift 2
- fi
- if [ "$1" = "-l" ]; then
- lock_file=$2
- shift 2
- fi
- base=${1##*/}
-
- if [ "$_use_systemctl" = "1" ]; then
- systemctl status ${0##*/}.service
- return $?
- fi
-
- # First try "pidof"
- __pids_var_run "$1" "$pid_file"
- RC=$?
- if [ -z "$pid_file" -a -z "$pid" ]; then
- pid="$(__pids_pidof "$1")"
- fi
- if [ -n "$pid" ]; then
- echo $"${base} (pid $pid) is running..."
- return 0
- fi
-
- case "$RC" in
- 0)
- echo $"${base} (pid $pid) is running..."
- return 0
- ;;
- 1)
- echo $"${base} dead but pid file exists"
- return 1
- ;;
- 4)
- echo $"${base} status unknown due to insufficient privileges."
- return 4
- ;;
- esac
- if [ -z "${lock_file}" ]; then
- lock_file=${base}
- fi
- # See if /var/lock/subsys/${lock_file} exists
- if [ -f /var/lock/subsys/${lock_file} ]; then
- echo $"${base} dead but subsys locked"
- return 2
- fi
- echo $"${base} is stopped"
- return 3
-}
-
-echo_success() {
- [ "$BOOTUP" = "color" ] && $MOVE_TO_COL
- echo -n "["
- [ "$BOOTUP" = "color" ] && $SETCOLOR_SUCCESS
- echo -n $" OK "
- [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL
- echo -n "]"
- echo -ne "\r"
- return 0
-}
-
-echo_failure() {
- [ "$BOOTUP" = "color" ] && $MOVE_TO_COL
- echo -n "["
- [ "$BOOTUP" = "color" ] && $SETCOLOR_FAILURE
- echo -n $"FAILED"
- [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL
- echo -n "]"
- echo -ne "\r"
- return 1
-}
-
-echo_passed() {
- [ "$BOOTUP" = "color" ] && $MOVE_TO_COL
- echo -n "["
- [ "$BOOTUP" = "color" ] && $SETCOLOR_WARNING
- echo -n $"PASSED"
- [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL
- echo -n "]"
- echo -ne "\r"
- return 1
-}
-
-echo_warning() {
- [ "$BOOTUP" = "color" ] && $MOVE_TO_COL
- echo -n "["
- [ "$BOOTUP" = "color" ] && $SETCOLOR_WARNING
- echo -n $"WARNING"
- [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL
- echo -n "]"
- echo -ne "\r"
- return 1
-}
-
-# Inform the graphical boot of our current state
-update_boot_stage() {
- if [ -x /usr/bin/plymouth ]; then
- /usr/bin/plymouth --update="$1"
- fi
- return 0
-}
-
-# Log that something succeeded
-success() {
- [ "$BOOTUP" != "verbose" -a -z "${LSB:-}" ] && echo_success
- return 0
-}
-
-# Log that something failed
-failure() {
- local rc=$?
- [ "$BOOTUP" != "verbose" -a -z "${LSB:-}" ] && echo_failure
- [ -x /usr/bin/plymouth ] && /usr/bin/plymouth --details
- return $rc
-}
-
-# Log that something passed, but may have had errors. Useful for fsck
-passed() {
- local rc=$?
- [ "$BOOTUP" != "verbose" -a -z "${LSB:-}" ] && echo_passed
- return $rc
-}
-
-# Log a warning
-warning() {
- local rc=$?
- [ "$BOOTUP" != "verbose" -a -z "${LSB:-}" ] && echo_warning
- return $rc
-}
-
-# Run some action. Log its output.
-action() {
- local STRING rc
-
- STRING=$1
- echo -n "$STRING "
- shift
- "$@" && success $"$STRING" || failure $"$STRING"
- rc=$?
- echo
- return $rc
-}
-
-# returns OK if $1 contains $2
-strstr() {
- [ "${1#*$2*}" = "$1" ] && return 1
- return 0
-}
-
-# Confirm whether we really want to run this service
-confirm() {
- [ -x /usr/bin/plymouth ] && /usr/bin/plymouth --hide-splash
- while : ; do
- echo -n $"Start service $1 (Y)es/(N)o/(C)ontinue? [Y] "
- read answer
- if strstr $"yY" "$answer" || [ "$answer" = "" ] ; then
- return 0
- elif strstr $"cC" "$answer" ; then
- rm -f /var/run/confirm
- [ -x /usr/bin/plymouth ] && /usr/bin/plymouth --show-splash
- return 2
- elif strstr $"nN" "$answer" ; then
- return 1
- fi
- done
-}
-
-# resolve a device node to its major:minor numbers in decimal or hex
-get_numeric_dev() {
-(
- fmt="%d:%d"
- if [ "$1" = "hex" ]; then
- fmt="%x:%x"
- fi
- ls -lH "$2" | awk '{ sub(/,/, "", $5); printf("'"$fmt"'", $5, $6); }'
-) 2>/dev/null
-}
-
-# Check whether file $1 is a backup or rpm-generated file and should be ignored
-is_ignored_file() {
- case "$1" in
- *~ | *.bak | *.orig | *.rpmnew | *.rpmorig | *.rpmsave)
- return 0
- ;;
- esac
- return 1
-}
-
-# Evaluate shvar-style booleans
-is_true() {
- case "$1" in
- [tT] | [yY] | [yY][eE][sS] | [tT][rR][uU][eE])
- return 0
- ;;
- esac
- return 1
-}
-
-# Evaluate shvar-style booleans
-is_false() {
- case "$1" in
- [fF] | [nN] | [nN][oO] | [fF][aA][lL][sS][eE])
- return 0
- ;;
- esac
- return 1
-}
-
-key_is_random() {
- [ "$1" = "/dev/urandom" -o "$1" = "/dev/hw_random" \
- -o "$1" = "/dev/random" ]
-}
-
-find_crypto_mount_point() {
- local fs_spec fs_file fs_vfstype remaining_fields
- local fs
- while read fs_spec fs_file remaining_fields; do
- if [ "$fs_spec" = "/dev/mapper/$1" ]; then
- echo $fs_file
- break;
- fi
- done < /etc/fstab
-}
-
-# Because of a chicken/egg problem, init_crypto must be run twice. /var may be
-# encrypted but /var/lib/random-seed is needed to initialize swap.
-init_crypto() {
- local have_random dst src key opt mode owner params makeswap skip arg opt
- local param value rc ret mke2fs mdir prompt mount_point
-
- ret=0
- have_random=$1
- while read dst src key opt; do
- [ -z "$dst" -o "${dst#\#}" != "$dst" ] && continue
- [ -b "/dev/mapper/$dst" ] && continue;
- if [ "$have_random" = 0 ] && key_is_random "$key"; then
- continue
- fi
- if [ -n "$key" -a "x$key" != "xnone" ]; then
- if test -e "$key" ; then
- owner=$(ls -l $key | (read a b owner rest; echo $owner))
- if ! key_is_random "$key"; then
- mode=$(ls -l "$key" | cut -c 5-10)
- if [ "$mode" != "------" ]; then
- echo $"INSECURE MODE FOR $key"
- fi
- fi
- if [ "$owner" != root ]; then
- echo $"INSECURE OWNER FOR $key"
- fi
- else
- echo $"Key file for $dst not found, skipping"
- ret=1
- continue
- fi
- else
- key=""
- fi
- params=""
- makeswap=""
- mke2fs=""
- skip=""
- # Parse the src field for UUID= and convert to real device names
- if [ "${src%%=*}" == "UUID" ]; then
- src=$(/sbin/blkid -t "$src" -l -o device)
- elif [ "${src/^\/dev\/disk\/by-uuid\/}" != "$src" ]; then
- src=$(__readlink $src)
- fi
- # Is it a block device?
- [ -b "$src" ] || continue
- # Is it already a device mapper slave? (this is gross)
- devesc=${src##/dev/}
- devesc=${devesc//\//!}
- for d in /sys/block/dm-*/slaves ; do
- [ -e $d/$devesc ] && continue 2
- done
- # Parse the options field, convert to cryptsetup parameters and
- # contruct the command line
- while [ -n "$opt" ]; do
- arg=${opt%%,*}
- opt=${opt##$arg}
- opt=${opt##,}
- param=${arg%%=*}
- value=${arg##$param=}
-
- case "$param" in
- cipher)
- params="$params -c $value"
- if [ -z "$value" ]; then
- echo $"$dst: no value for cipher option, skipping"
- skip="yes"
- fi
- ;;
- size)
- params="$params -s $value"
- if [ -z "$value" ]; then
- echo $"$dst: no value for size option, skipping"
- skip="yes"
- fi
- ;;
- hash)
- params="$params -h $value"
- if [ -z "$value" ]; then
- echo $"$dst: no value for hash option, skipping"
- skip="yes"
- fi
- ;;
- verify)
- params="$params -y"
- ;;
- swap)
- makeswap=yes
- ;;
- tmp)
- mke2fs=yes
- esac
- done
- if [ "$skip" = "yes" ]; then
- ret=1
- continue
- fi
- if [ -z "$makeswap" ] && cryptsetup isLuks "$src" 2>/dev/null ; then
- if key_is_random "$key"; then
- echo $"$dst: LUKS requires non-random key, skipping"
- ret=1
- continue
- fi
- if [ -n "$params" ]; then
- echo "$dst: options are invalid for LUKS partitions," \
- "ignoring them"
- fi
- if [ -n "$key" ]; then
- /sbin/cryptsetup -d $key luksOpen "$src" "$dst" <&1 2>/dev/null && success || failure
- rc=$?
- else
- mount_point="$(find_crypto_mount_point $dst)"
- [ -n "$mount_point" ] || mount_point=${src##*/}
- prompt=$(printf $"%s is password protected" "$mount_point")
- plymouth ask-for-password --prompt "$prompt" --command="/sbin/cryptsetup luksOpen -T1 $src $dst" <&1
- rc=$?
- fi
- else
- [ -z "$key" ] && plymouth --hide-splash
- /sbin/cryptsetup $params ${key:+-d $key} create "$dst" "$src" <&1 2>/dev/null && success || failure
- rc=$?
- [ -z "$key" ] && plymouth --show-splash
- fi
- if [ $rc -ne 0 ]; then
- ret=1
- continue
- fi
- if [ -b "/dev/mapper/$dst" ]; then
- if [ "$makeswap" = "yes" ]; then
- mkswap "/dev/mapper/$dst" 2>/dev/null >/dev/null
- fi
- if [ "$mke2fs" = "yes" ]; then
- if mke2fs "/dev/mapper/$dst" 2>/dev/null >/dev/null \
- && mdir=$(mktemp -d /tmp/mountXXXXXX); then
- mount "/dev/mapper/$dst" "$mdir" && chmod 1777 "$mdir"
- umount "$mdir"
- rmdir "$mdir"
- fi
- fi
- fi
- done < /etc/crypttab
- return $ret
-}
-
-# A sed expression to filter out the files that is_ignored_file recognizes
-__sed_discard_ignored_files='/\(~\|\.bak\|\.orig\|\.rpmnew\|\.rpmorig\|\.rpmsave\)$/d'
-
-if [ "$_use_systemctl" = "1" ]; then
- if [ "x$1" = xstart -o \
- "x$1" = xstop -o \
- "x$1" = xrestart -o \
- "x$1" = xreload -o \
- "x$1" = xtry-restart -o \
- "x$1" = xforce-reload -o \
- "x$1" = xcondrestart ] ; then
-
- systemctl_redirect $0 $1
- exit $?
- fi
-fi
git://git.onelab.eu / sfa.git / blobdiff