%define builduml 0
%define buildxen 0
%define builddoc 0
+%define headers 1
-# default is to not build this - to override, use something like
-# kernel-SPECVARS := iwlwifi=1
-# rpm does not seem to have a syntax for defining overridable defaults
-# any better solution would be more than welcome.
-%define build_iwlwifi %{?iwlwifi:1}%{!?iwlwifi:0}
+# from 2.6.27 iwlwifi in builtin
# Versions of various parts
# for module-tag.py - sublevel is used for the version (middle) part of tag names
%define name linux-2.6
%define module_version_varname sublevel
-%define taglevel 30
+%define taglevel 2
#
# Polite request for people who spin their own kernel rpms:
# that the kernel isn't the stock distribution kernel, for example by
# adding some text to the end of the version number.
#
-%define sublevel 22
-%define patchlevel 19
+%define sublevel 27
+%define patchlevel 14
%define kversion 2.6.%{sublevel}
%define rpmversion 2.6.%{sublevel}%{?patchlevel:.%{patchlevel}}
-%define vsversion 2.3.0.34
+%define vsversion 2.3.0.36.4
# Will go away when VServer supports NetNS in mainline. Currently, it must be
# updated every time the PL kernel is updated.
%define vini_pl_patch 561
-%define release vs%{vsversion}.%{taglevel}%{?pldistro:.%{pldistro}}%{?date:.%{date}}
+%define release vs%{vsversion}.%{taglevel}%{?pldistro:.%{pldistro}}.vini%{?date:.%{date}}
%{!?pldistro:%global pldistro planetlab}
#
# MEF commented out
-# %define xen_conflicts glibc < 2.3.5-1
+#define xen_conflicts glibc < 2.3.5-1
#
# Packages that need to be installed before the kernel is, because the %post
Patch000: ftp://ftp.kernel.org/pub/linux/kernel/v2.6/patch-%{rpmversion}.bz2
%endif
-Patch010: linux-2.6-010-e1000e.patch
-Patch020: linux-2.6-020-build-id.patch
-Patch030: linux-2.6-030-netns.patch
-Patch040: linux-2.6-040-i_mutex-check.patch
-
-# These are patches picked up from Fedora/RHEL
-Patch100: linux-2.6-100-build-nonintconfig.patch
-
# Linux-VServer
Patch200: patch-%{rpmversion}-vs%{vsversion}.diff
-Patch210: linux-2.6-210-vserver-cpu-sched.patch
-Patch220: delta-ptrace-fix01.diff
# IP sets
Patch250: linux-2.6-250-ipsets.patch
Patch523: linux-2.6-523-raw-sockets.patch
Patch524: linux-2.6-524-peercred.patch
Patch525: linux-2.6-525-sknid-elevator.patch
-Patch526: linux-2.6-526-tun-tap.patch
+# Patch526: linux-2.6-526-tun-tap.patch
Patch527: linux-2.6-527-iptables-classify-add-mark.patch
Patch530: linux-2.6-530-built-by-support.patch
Patch540: linux-2.6-540-oom-kill.patch
Patch560: linux-2.6-560-mmconf.patch
Patch570: linux-2.6-570-tagxid.patch
Patch580: linux-2.6-580-show-proc-virt.patch
-Patch590: linux-2.6-590-chopstix-intern.patch
-Patch620: linux-2.6-620-kdb.patch
-Patch630: linux-2.6-630-sched-fix.patch
+# Patch590: linux-2.6-590-chopstix-intern.patch
+# Patch630: linux-2.6-630-sched-fix.patch
Patch640: linux-2.6-640-netlink-audit-hack.patch
Patch650: linux-2.6-650-hangcheck-reboot.patch
Patch660: linux-2.6-660-nmi-watchdog-default.patch
-%if "%{distroname}" == "f9"
-Patch670: linux-2.6-670-gcc43.patch
-%endif
-
-# See also the file named 'sources' here for the related checksums
-# NOTE. iwlwifi should be in-kernel starting from 2.6.24
-# see http://bughost.org/bugzilla/show_bug.cgi?id=1584
-%if %{build_iwlwifi}
-%define mac80211_version 10.0.4
-Patch600: http://intellinuxwireless.org/mac80211/downloads/mac80211-%{mac80211_version}.tgz
-%define iwlwifi_version 1.2.25
-Patch601: http://intellinuxwireless.org/iwlwifi/downloads/iwlwifi-%{iwlwifi_version}.tgz
-%endif
+Patch680: linux-2.6-680-htb-hysteresis-tso.patch
+Patch690: linux-2.6-690-web100.patch
+Patch700: linux-2.6-700-egre.patch
+Patch710: linux-2.6-710-netns-unshare-kludge.patch
BuildRoot: %{_tmppath}/kernel-%{KVERREL}-root
(e.g. tcpdump). This package installs no files but provides the
necessary dependencies to make rpm and yum happy.
+%package headers
+Summary: Kernel header
+Group: System Environment/Kernel
+
+%description headers
+This package contains the sanitized kernel headers.
%prep
# First we unpack the kernel tarball.
%ApplyPatch 0
%endif
-%ApplyPatch 10
-%ApplyPatch 20
-
# NetNS patch for VINI
-%if 0%{?with_netns}
-%ApplyPatch 30
-%endif
-%ApplyPatch 40
-
-%ApplyPatch 100
%ApplyPatch 200
-%ApplyPatch 210
-%ApplyPatch 220
%ApplyPatch 250
%ApplyPatch 523
%ApplyPatch 524
%ApplyPatch 525
-%ApplyPatch 526
%ApplyPatch 527
%ApplyPatch 530
%ApplyPatch 560
%ApplyPatch 570
%ApplyPatch 580
-%ApplyPatch 590
-%ApplyPatch 620
-%ApplyPatch 630
%ApplyPatch 640
%ApplyPatch 650
%ApplyPatch 660
-%if "%{distroname}" == "f9"
-%ApplyPatch 670
-%endif
-
-
-# NetNS conflict-resolving patch for VINI. Will work with patch vini_pl_patch-1 but may
-# break with later patches.
-
-%if 0%{?with_netns}
-%ApplyPatch %vini_pl_patch
-%endif
+%ApplyPatch 700
+%ApplyPatch 710
-%if %{build_iwlwifi}
-# Run the mac80211 stuff in the kernel tree holding the last patch
-tar -xzf %{PATCH600}
-pushd mac80211-%{mac80211_version}
-mac80211_makeflags="KSRC=../$KERNEL_PREVIOUS"
-make $mac80211_makeflags modified
-make $mac80211_makeflags source
-make $mac80211_makeflags patch_kernel
-popd
-
-# Untar iwlwifi in the same place - needs to be compiled later
-tar -xzf %{PATCH601}
-# the install target is broken: first it does not pass the right -b flag to depmod
-# second we do not need to invoke depmod at this stage anyway
-# let's add our own patch/stuff in this Makefile for manual install later on
-pushd iwlwifi-%{iwlwifi_version}
-cat >> Makefile <<EOF
-module-list:
- @echo \$(addprefix \$(DIR),\$(addsuffix .ko,\$(list-m)))
-EOF
-popd
-%endif
rm -fr linux-%{kversion}
ln -sf $KERNEL_PREVIOUS linux-%{kversion}
#Arch=`head -1 .config | cut -b 3-`
echo USING ARCH=$Arch
- make -s ARCH=$Arch nonint_oldconfig > /dev/null
+ make -s ARCH=$Arch oldconfig < /dev/null > /dev/null
make -s ARCH=$Arch %{?_smp_mflags} $MakeTarget
make -s ARCH=$Arch %{?_smp_mflags} modules || exit 1
-
-%if %{build_iwlwifi}
- # build the iwlwifi driver
- make -C %{_builddir}/kernel-%{kversion}/iwlwifi-%{iwlwifi_version} ARCH=$Arch \
- KSRC=%{_builddir}/kernel-%{kversion}/linux-%{_target_cpu}-%{kversion}$Flavour
+%if %{headers}
+ make -s ARCH=$Arch INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr
+ find $RPM_BUILD_ROOT/%{_includedir} -name \*.cmd -delete
+ rm -f $RPM_BUILD_ROOT/%{_includedir}/{..,.}{check,install}*
%endif
# Start installing the results
mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer
make -s ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT modules_install KERNELRELEASE=$KernelVer
-%if %{build_iwlwifi}
- # install iwlwifi
-# make -C %{_builddir}/kernel-%{kversion}/iwlwifi-%{iwlwifi_version} ARCH=$Arch \
-# KSRC=%{_builddir}/kernel-%{kversion}/linux-%{_target_cpu}-%{kversion}$Flavour \
-# KMISC=$RPM_BUILD_ROOT/lib/modules/$KernelVer/kernel/drivers/net/wireless install
- pushd %{_builddir}/kernel-%{kversion}/iwlwifi-%{iwlwifi_version}
- iwlwifi_dest=$RPM_BUILD_ROOT/lib/modules/$KernelVer/kernel/drivers/net/wireless
- # get the list and location of modules to install - no need to pass KSRC nor anything, let's keep it simple
- iwlwifi_modules=$(make --no-print-directory module-list)
- install -d $iwlwifi_dest
- install -m 644 -c $iwlwifi_modules $iwlwifi_dest
- popd
-%endif
-
# And save the headers/makefiles etc for building modules against
#
# This all looks scary, but the end result is supposed to be:
cp -a acpi config keys linux math-emu media mtd net pcmcia rdma rxrpc scsi sound video asm asm-generic $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include
cp -a `readlink asm` $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include
if [ "$Arch" = "x86_64" ]; then
- cp -a asm-i386 $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include
+ cp -a asm-x86 $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include
fi
%if %{buildxen}
if [ "$Flavour" = "xenU" ]; then
cp -a xen $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include
- cp -a asm-i386 $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include
+ cp -a asm-x86 $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include
fi
%endif
%if %{builduml}
%dir %{_datadir}/doc/kernel-doc-%{kversion}
%endif
+%if %{headers}
+%files headers
+%defattr(-,root,root)
+%dir %{_includedir}
+%{_includedir}/*
+%endif
+
%changelog
+* Tue Mar 24 2009 Thierry Parmentelat <thierry.parmentelat@sophia.inria.fr> - linux-2.6-27-2
+- cleaned up obsolete (2.6.22) configs
+- added gnuradio config links
+- fix for building headers package (remove .cmd files)
+
+* Tue Mar 10 2009 Thierry Parmentelat <thierry.parmentelat@sophia.inria.fr> - linux-2.6-27-1
+- untested feature-complete version, but for the scheduler that is still missing
+
+* Thu Jan 08 2009 Thierry Parmentelat <thierry.parmentelat@sophia.inria.fr> - linux-2.6-22-32
+- support building on fedora 10
+
+* Tue Dec 02 2008 Daniel Hokka Zakrisson <daniel@hozac.com> - linux-2.6-22-31
+- add patches for m-lab and drl
+
* Tue Nov 11 2008 Daniel Hokka Zakrisson <daniel@hozac.com> - linux-2.6-22-30
- Use Intel's e1000e driver.
- Sync with FC5's 2.6.16 kernel.
- Update Tux & Exec-shield to latest.
+
+%define module_current_branch 22