lib/flow: add dp_hash and recirc_id to struct flow
[sliver-openvswitch.git] / lib / flow.h
index a828b66..a6f45c9 100644 (file)
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2008, 2009, 2010, 2011, 2012, 2013 Nicira, Inc.
+ * Copyright (c) 2008, 2009, 2010, 2011, 2012, 2013, 2014 Nicira, Inc.
  *
  * Licensed under the Apache License, Version 2.0 (the "License");
  * you may not use this file except in compliance with the License.
@@ -32,11 +32,12 @@ struct ds;
 struct flow_wildcards;
 struct minimask;
 struct ofpbuf;
+struct pkt_metadata;
 
 /* This sequence number should be incremented whenever anything involving flows
  * or the wildcarding of flows changes.  This will cause build assertion
  * failures in places which likely need to be updated. */
-#define FLOW_WC_SEQ 23
+#define FLOW_WC_SEQ 25
 
 #define FLOW_N_REGS 8
 BUILD_ASSERT_DECL(FLOW_N_REGS <= NXM_NX_MAX_REGS);
@@ -72,10 +73,13 @@ struct flow_tnl {
  * numbers and other times datapath (dpif) port numbers.  This union allows
  * access to both. */
 union flow_in_port {
-    ofp_port_t ofp_port;
     odp_port_t odp_port;
+    ofp_port_t ofp_port;
 };
 
+/* Maximum number of supported MPLS labels. */
+#define FLOW_MAX_MPLS_LABELS 3
+
 /*
  * A flow in the network.
  *
@@ -93,6 +97,11 @@ union flow_in_port {
  * be looked at.  This enables better wildcarding for datapath flows.
  */
 struct flow {
+    /* Recirculation */
+    uint32_t dp_hash;           /* Datapath computed hash value. The exact
+                                   computation is opaque to the user space.*/
+    uint32_t recirc_id;         /* Must be exact match. */
+
     /* L1 */
     struct flow_tnl tunnel;     /* Encapsulating tunnel parameters. */
     ovs_be64 metadata;          /* OpenFlow Metadata. */
@@ -106,9 +115,9 @@ struct flow {
     uint8_t dl_dst[6];          /* Ethernet destination address. */
     ovs_be16 dl_type;           /* Ethernet frame type. */
     ovs_be16 vlan_tci;          /* If 802.1Q, TCI | VLAN_CFI; otherwise 0. */
+    ovs_be32 mpls_lse[FLOW_MAX_MPLS_LABELS]; /* MPLS label stack entry. */
 
     /* L3 */
-    ovs_be32 mpls_lse;          /* MPLS label stack entry. */
     struct in6_addr ipv6_src;   /* IPv6 source address. */
     struct in6_addr ipv6_dst;   /* IPv6 destination address. */
     struct in6_addr nd_target;  /* IPv6 neighbor discovery (ND) target. */
@@ -123,6 +132,7 @@ struct flow {
     uint8_t arp_tha[6];         /* ARP/ND target hardware address. */
     ovs_be16 tcp_flags;         /* TCP flags. With L3 to avoid matching L4. */
     ovs_be16 pad;               /* Padding. */
+
     /* L4 */
     ovs_be16 tp_src;            /* TCP/UDP/SCTP source port. */
     ovs_be16 tp_dst;            /* TCP/UDP/SCTP destination port.
@@ -134,8 +144,8 @@ BUILD_ASSERT_DECL(sizeof(struct flow) % 4 == 0);
 
 /* Remember to update FLOW_WC_SEQ when changing 'struct flow'. */
 BUILD_ASSERT_DECL(offsetof(struct flow, tp_dst) + 2
-                  == sizeof(struct flow_tnl) + 156
-                  && FLOW_WC_SEQ == 23);
+                  == sizeof(struct flow_tnl) + 172
+                  && FLOW_WC_SEQ == 25);
 
 /* Incremental points at which flow classification may be performed in
  * segments.
@@ -145,7 +155,7 @@ BUILD_ASSERT_DECL(offsetof(struct flow, tp_dst) + 2
  * within the struct flow. */
 enum {
     FLOW_SEGMENT_1_ENDS_AT = offsetof(struct flow, dl_src),
-    FLOW_SEGMENT_2_ENDS_AT = offsetof(struct flow, mpls_lse),
+    FLOW_SEGMENT_2_ENDS_AT = offsetof(struct flow, ipv6_src),
     FLOW_SEGMENT_3_ENDS_AT = offsetof(struct flow, tp_src),
 };
 BUILD_ASSERT_DECL(FLOW_SEGMENT_1_ENDS_AT % 4 == 0);
@@ -160,6 +170,8 @@ extern const uint8_t flow_segment_u32s[];
 
 /* Represents the metadata fields of struct flow. */
 struct flow_metadata {
+    uint32_t dp_hash;                /* Datapath computed hash field. */
+    uint32_t recirc_id;              /* Recirculation ID. */
     ovs_be64 tun_id;                 /* Encapsulating tunnel ID. */
     ovs_be32 tun_src;                /* Tunnel outer IPv4 src addr */
     ovs_be32 tun_dst;                /* Tunnel outer IPv4 dst addr */
@@ -169,8 +181,7 @@ struct flow_metadata {
     ofp_port_t in_port;              /* OpenFlow port or zero. */
 };
 
-void flow_extract(struct ofpbuf *, uint32_t priority, uint32_t mark,
-                  const struct flow_tnl *, const union flow_in_port *in_port,
+void flow_extract(struct ofpbuf *, const struct pkt_metadata *md,
                   struct flow *);
 
 void flow_zero_wildcards(struct flow *, const struct flow_wildcards *);
@@ -194,10 +205,19 @@ void flow_set_dl_vlan(struct flow *, ovs_be16 vid);
 void flow_set_vlan_vid(struct flow *, ovs_be16 vid);
 void flow_set_vlan_pcp(struct flow *, uint8_t pcp);
 
-void flow_set_mpls_label(struct flow *flow, ovs_be32 label);
-void flow_set_mpls_ttl(struct flow *flow, uint8_t ttl);
-void flow_set_mpls_tc(struct flow *flow, uint8_t tc);
-void flow_set_mpls_bos(struct flow *flow, uint8_t stack);
+int flow_count_mpls_labels(const struct flow *, struct flow_wildcards *);
+int flow_count_common_mpls_labels(const struct flow *a, int an,
+                                  const struct flow *b, int bn,
+                                  struct flow_wildcards *wc);
+void flow_push_mpls(struct flow *, int n, ovs_be16 mpls_eth_type,
+                    struct flow_wildcards *);
+bool flow_pop_mpls(struct flow *, int n, ovs_be16 eth_type,
+                   struct flow_wildcards *);
+void flow_set_mpls_label(struct flow *, int idx, ovs_be32 label);
+void flow_set_mpls_ttl(struct flow *, int idx, uint8_t ttl);
+void flow_set_mpls_tc(struct flow *, int idx, uint8_t tc);
+void flow_set_mpls_bos(struct flow *, int idx, uint8_t stack);
+void flow_set_mpls_lse(struct flow *, int idx, ovs_be32 lse);
 
 void flow_compose(struct ofpbuf *, const struct flow *);
 
@@ -310,6 +330,7 @@ void flow_wildcards_fold_minimask_range(struct flow_wildcards *,
 uint32_t flow_wildcards_hash(const struct flow_wildcards *, uint32_t basis);
 bool flow_wildcards_equal(const struct flow_wildcards *,
                           const struct flow_wildcards *);
+uint32_t flow_hash_5tuple(const struct flow *flow, uint32_t basis);
 uint32_t flow_hash_symmetric_l4(const struct flow *flow, uint32_t basis);
 
 /* Initialize a flow with random fields that matter for nx_hash_fields. */
@@ -362,7 +383,9 @@ BUILD_ASSERT_DECL(FLOW_U32S <= 64);
  *
  * Elements in 'values' are allowed to be zero.  This is useful for "struct
  * minimatch", for which ensuring that the miniflow and minimask members have
- * same 'map' allows optimization .
+ * same 'map' allows optimization.  This allowance applies only to a miniflow
+ * that is not a mask.  That is, a minimask may NOT have zero elements in
+ * its 'values'.
  */
 struct miniflow {
     uint64_t map;
@@ -393,14 +416,19 @@ bool miniflow_equal_flow_in_minimask(const struct miniflow *a,
 uint32_t miniflow_hash(const struct miniflow *, uint32_t basis);
 uint32_t miniflow_hash_in_minimask(const struct miniflow *,
                                    const struct minimask *, uint32_t basis);
-uint64_t miniflow_get_map_in_range(const struct miniflow *, uint8_t start,
-                                   uint8_t end, const uint32_t **data);
+uint64_t miniflow_get_map_in_range(const struct miniflow *miniflow,
+                                   uint8_t start, uint8_t end,
+                                   unsigned int *offset);
+
 \f
 /* Compressed flow wildcards. */
 
 /* A sparse representation of a "struct flow_wildcards".
  *
- * See the large comment on struct miniflow for details. */
+ * See the large comment on struct miniflow for details.
+ *
+ * Note: While miniflow can have zero data for a 1-bit in the map,
+ * a minimask may not!  We rely on this in the implementation. */
 struct minimask {
     struct miniflow masks;
 };