#include <string.h>
#include <unistd.h>
+#include "connectivity.h"
#include "coverage.h"
#include "dpif.h"
#include "dynamic-string.h"
#include "openflow/openflow.h"
#include "packets.h"
#include "poll-loop.h"
+#include "seq.h"
#include "shash.h"
#include "smap.h"
#include "sset.h"
netdev_register_provider(&netdev_tap_class);
netdev_register_provider(&netdev_bsd_class);
#endif
+ netdev_register_provider(&netdev_tunnel_class);
+ netdev_register_provider(&netdev_pltap_class);
ovsthread_once_done(&once);
}
atomic_read(&rc->ref_cnt, &ref_cnt);
if (!ref_cnt) {
hmap_remove(&netdev_classes, &rc->hmap_node);
+ atomic_destroy(&rc->ref_cnt);
free(rc);
error = 0;
} else {
int old_ref_cnt;
atomic_add(&rc->ref_cnt, 1, &old_ref_cnt);
+ seq_change(connectivity_seq_get());
} else {
free(netdev->name);
ovs_assert(list_is_empty(&netdev->saved_flags_list));
{
if (netdev->netdev_class->set_config) {
const struct smap no_args = SMAP_INITIALIZER(&no_args);
- return netdev->netdev_class->set_config(netdev,
- args ? args : &no_args);
+ int error;
+
+ error = netdev->netdev_class->set_config(netdev,
+ args ? args : &no_args);
+ if (error) {
+ VLOG_WARN("%s: could not set configuration (%s)",
+ netdev_get_name(netdev), ovs_strerror(error));
+ }
+ return error;
} else if (args && !smap_is_empty(args)) {
VLOG_WARN("%s: arguments provided to device that is not configurable",
netdev_get_name(netdev));
}
-
return 0;
}
}
}
+/* Attempts to open a netdev_rx handle for obtaining packets received on
+ * 'netdev'. On success, returns 0 and stores a nonnull 'netdev_rx *' into
+ * '*rxp'. On failure, returns a positive errno value and stores NULL into
+ * '*rxp'.
+ *
+ * Some kinds of network devices might not support receiving packets. This
+ * function returns EOPNOTSUPP in that case.*/
int
netdev_rx_open(struct netdev *netdev, struct netdev_rx **rxp)
OVS_EXCLUDED(netdev_mutex)
return error;
}
+/* Closes 'rx'. */
void
netdev_rx_close(struct netdev_rx *rx)
OVS_EXCLUDED(netdev_mutex)
}
}
+/* Attempts to receive a packet from 'rx' into the tailroom of 'buffer', which
+ * must initially be empty. If successful, returns 0 and increments
+ * 'buffer->size' by the number of bytes in the received packet, otherwise a
+ * positive errno value.
+ *
+ * Returns EAGAIN immediately if no packet is ready to be received.
+ *
+ * Returns EMSGSIZE, and discards the packet, if the received packet is longer
+ * than 'ofpbuf_tailroom(buffer)'.
+ *
+ * Implementations may make use of VLAN_HEADER_LEN bytes of tailroom to
+ * add a VLAN header which is obtained out-of-band to the packet. If
+ * this occurs then VLAN_HEADER_LEN bytes of tailroom will no longer be
+ * available for the packet, otherwise it may be used for the packet
+ * itself.
+ *
+ * It is advised that the tailroom of 'buffer' should be
+ * VLAN_HEADER_LEN bytes longer than the MTU to allow space for an
+ * out-of-band VLAN header to be added to the packet. At the very least,
+ * 'buffer' must have at least ETH_TOTAL_MIN bytes of tailroom.
+ *
+ * This function may be set to null if it would always return EOPNOTSUPP
+ * anyhow. */
int
netdev_rx_recv(struct netdev_rx *rx, struct ofpbuf *buffer)
{
ovs_assert(buffer->size == 0);
ovs_assert(ofpbuf_tailroom(buffer) >= ETH_TOTAL_MIN);
- retval = rx->netdev->netdev_class->rx_recv(rx, buffer->data,
- ofpbuf_tailroom(buffer));
- if (retval >= 0) {
+ retval = rx->netdev->netdev_class->rx_recv(rx, buffer);
+ if (!retval) {
COVERAGE_INC(netdev_received);
- buffer->size += retval;
if (buffer->size < ETH_TOTAL_MIN) {
ofpbuf_put_zeros(buffer, ETH_TOTAL_MIN - buffer->size);
}
return 0;
} else {
- return -retval;
+ return retval;
}
}
+/* Arranges for poll_block() to wake up when a packet is ready to be received
+ * on 'rx'. */
void
netdev_rx_wait(struct netdev_rx *rx)
{
rx->netdev->netdev_class->rx_wait(rx);
}
+/* Discards any packets ready to be received on 'rx'. */
int
netdev_rx_drain(struct netdev_rx *rx)
{
return retval;
}
-/* Iterates over all of 'netdev''s queues, calling 'cb' with the queue's ID,
- * its configuration, and the 'aux' specified by the caller. The order of
- * iteration is unspecified, but (when successful) each queue is visited
- * exactly once.
+/* Initializes 'dump' to begin dumping the queues in a netdev.
*
- * Calling this function may be more efficient than calling netdev_get_queue()
- * for every queue.
+ * This function provides no status indication. An error status for the entire
+ * dump operation is provided when it is completed by calling
+ * netdev_queue_dump_done().
+ */
+void
+netdev_queue_dump_start(struct netdev_queue_dump *dump,
+ const struct netdev *netdev)
+{
+ dump->netdev = netdev_ref(netdev);
+ if (netdev->netdev_class->queue_dump_start) {
+ dump->error = netdev->netdev_class->queue_dump_start(netdev,
+ &dump->state);
+ } else {
+ dump->error = EOPNOTSUPP;
+ }
+}
+
+/* Attempts to retrieve another queue from 'dump', which must have been
+ * initialized with netdev_queue_dump_start(). On success, stores a new queue
+ * ID into '*queue_id', fills 'details' with configuration details for the
+ * queue, and returns true. On failure, returns false.
*
- * 'cb' must not modify or free the 'details' argument passed in. It may
- * delete or modify the queue passed in as its 'queue_id' argument. It may
- * modify but must not delete any other queue within 'netdev'. 'cb' should not
- * add new queues because this may cause some queues to be visited twice or not
- * at all.
+ * Queues are not necessarily dumped in increasing order of queue ID (or any
+ * other predictable order).
*
- * Returns 0 if successful, otherwise a positive errno value. On error, some
- * configured queues may not have been included in the iteration. */
+ * Failure might indicate an actual error or merely that the last queue has
+ * been dumped. An error status for the entire dump operation is provided when
+ * it is completed by calling netdev_queue_dump_done().
+ *
+ * The returned contents of 'details' should be documented as valid for the
+ * given 'type' in the "other_config" column in the "Queue" table in
+ * vswitchd/vswitch.xml (which is built as ovs-vswitchd.conf.db(8)).
+ *
+ * The caller must initialize 'details' (e.g. with smap_init()) before calling
+ * this function. This function will clear and replace its contents. The
+ * caller must free 'details' when it is no longer needed (e.g. with
+ * smap_destroy()). */
+bool
+netdev_queue_dump_next(struct netdev_queue_dump *dump,
+ unsigned int *queue_id, struct smap *details)
+{
+ const struct netdev *netdev = dump->netdev;
+
+ if (dump->error) {
+ return false;
+ }
+
+ dump->error = netdev->netdev_class->queue_dump_next(netdev, dump->state,
+ queue_id, details);
+
+ if (dump->error) {
+ netdev->netdev_class->queue_dump_done(netdev, dump->state);
+ return false;
+ }
+ return true;
+}
+
+/* Completes queue table dump operation 'dump', which must have been
+ * initialized with netdev_queue_dump_start(). Returns 0 if the dump operation
+ * was error-free, otherwise a positive errno value describing the problem. */
int
-netdev_dump_queues(const struct netdev *netdev,
- netdev_dump_queues_cb *cb, void *aux)
+netdev_queue_dump_done(struct netdev_queue_dump *dump)
{
- const struct netdev_class *class = netdev->netdev_class;
- return (class->dump_queues
- ? class->dump_queues(netdev, cb, aux)
- : EOPNOTSUPP);
+ const struct netdev *netdev = dump->netdev;
+ if (!dump->error && netdev->netdev_class->queue_dump_done) {
+ dump->error = netdev->netdev_class->queue_dump_done(netdev,
+ dump->state);
+ }
+ netdev_close(dump->netdev);
+ return dump->error == EOF ? 0 : dump->error;
}
/* Iterates over all of 'netdev''s queues, calling 'cb' with the queue's ID,
: EOPNOTSUPP);
}
-/* Returns a sequence number which indicates changes in one of 'netdev''s
- * properties. The returned sequence will be nonzero so that callers have a
- * value which they may use as a reset when tracking 'netdev'.
- *
- * The returned sequence number will change whenever 'netdev''s flags,
- * features, ethernet address, or carrier changes. It may change for other
- * reasons as well, or no reason at all. */
-unsigned int
-netdev_change_seq(const struct netdev *netdev)
-{
- return netdev->netdev_class->change_seq(netdev);
-}
\f
/* Returns the class type of 'netdev'.
*
git://git.onelab.eu / sliver-openvswitch.git / blobdiff