menu "IP: Netfilter Configuration"
depends on INET && NETFILTER
+config NF_CONNTRACK_IPV4
+ tristate "IPv4 support for new connection tracking (EXPERIMENTAL)"
+ depends on EXPERIMENTAL && NF_CONNTRACK
+ ---help---
+ Connection tracking keeps a record of what packets have passed
+ through your machine, in order to figure out how they are related
+ into connections.
+
+ This is IPv4 support on Layer 3 independent connection tracking.
+ Layer 3 independent connection tracking is experimental scheme
+ which generalize ip_conntrack to support other layer 3 protocols.
+
+ To compile it as a module, choose M here. If unsure, say N.
+
+# connection tracking, helpers and protocols
config IP_NF_CONNTRACK
tristate "Connection tracking (required for masq/NAT)"
---help---
To compile it as a module, choose M here. If unsure, say N.
+config IP_NF_CT_ACCT
+ bool "Connection tracking flow accounting"
+ depends on IP_NF_CONNTRACK
+ help
+ If this option is enabled, the connection tracking code will
+ keep per-flow packet and byte counters.
+
+ Those counters can be used for flow-based accounting or the
+ `connbytes' match.
+
+ If unsure, say `N'.
+
+config IP_NF_CONNTRACK_MARK
+ bool 'Connection mark tracking support'
+ depends on IP_NF_CONNTRACK
+ help
+ This option enables support for connection marks, used by the
+ `CONNMARK' target and `connmark' match. Similar to the mark value
+ of packets, but this mark value is kept in the conntrack session
+ instead of the individual packets.
+
+config IP_NF_CONNTRACK_EVENTS
+ bool "Connection tracking events (EXPERIMENTAL)"
+ depends on EXPERIMENTAL && IP_NF_CONNTRACK
+ help
+ If this option is enabled, the connection tracking code will
+ provide a notifier chain that can be used by other kernel code
+ to get notified about changes in the connection tracking state.
+
+ IF unsure, say `N'.
+
+config IP_NF_CONNTRACK_NETLINK
+ tristate 'Connection tracking netlink interface (EXPERIMENTAL)'
+ depends on EXPERIMENTAL && IP_NF_CONNTRACK && NETFILTER_NETLINK
+ depends on IP_NF_CONNTRACK!=y || NETFILTER_NETLINK!=m
+ depends on IP_NF_NAT=n || IP_NF_NAT
+ help
+ This option enables support for a netlink-based userspace interface
+
+
+config IP_NF_CT_PROTO_SCTP
+ tristate 'SCTP protocol connection tracking support (EXPERIMENTAL)'
+ depends on IP_NF_CONNTRACK && EXPERIMENTAL
+ help
+ With this option enabled, the connection tracking code will
+ be able to do state tracking on SCTP connections.
+
+ If you want to compile it as a module, say M here and read
+ <file:Documentation/modules.txt>. If unsure, say `N'.
+
config IP_NF_FTP
tristate "FTP protocol support"
depends on IP_NF_CONNTRACK
To compile it as a module, choose M here. If unsure, say Y.
+config IP_NF_NETBIOS_NS
+ tristate "NetBIOS name service protocol support (EXPERIMENTAL)"
+ depends on IP_NF_CONNTRACK && EXPERIMENTAL
+ help
+ NetBIOS name service requests are sent as broadcast messages from an
+ unprivileged port and responded to with unicast messages to the
+ same port. This make them hard to firewall properly because connection
+ tracking doesn't deal with broadcasts. This helper tracks locally
+ originating NetBIOS name service requests and the corresponding
+ responses. It relies on correct IP address configuration, specifically
+ netmask and broadcast address. When properly configured, the output
+ of "ip address show" should look similar to this:
+
+ $ ip -4 address show eth0
+ 4: eth0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000
+ inet 172.16.2.252/24 brd 172.16.2.255 scope global eth0
+
+ To compile it as a module, choose M here. If unsure, say N.
+
config IP_NF_TFTP
tristate "TFTP protocol support"
depends on IP_NF_CONNTRACK
To compile it as a module, choose M here. If unsure, say Y.
+config IP_NF_PPTP
+ tristate 'PPTP protocol support'
+ depends on IP_NF_CONNTRACK
+ help
+ This module adds support for PPTP (Point to Point Tunnelling
+ Protocol, RFC2637) connection tracking and NAT.
+
+ If you are running PPTP sessions over a stateful firewall or NAT
+ box, you may want to enable this feature.
+
+ Please note that not all PPTP modes of operation are supported yet.
+ For more info, read top of the file
+ net/ipv4/netfilter/ip_conntrack_pptp.c
+
+ If you want to compile it as a module, say M here and read
+ Documentation/modules.txt. If unsure, say `N'.
+
+config IP_NF_H323
+ tristate 'H.323 protocol support (EXPERIMENTAL)'
+ depends on IP_NF_CONNTRACK && EXPERIMENTAL
+ help
+ H.323 is a VoIP signalling protocol from ITU-T. As one of the most
+ important VoIP protocols, it is widely used by voice hardware and
+ software including voice gateways, IP phones, Netmeeting, OpenPhone,
+ Gnomemeeting, etc.
+
+ With this module you can support H.323 on a connection tracking/NAT
+ firewall.
+
+ This module supports RAS, Fast-start, H.245 tunnelling, RTP/RTCP
+ and T.120 based data and applications including audio, video, FAX,
+ chat, whiteboard, file transfer, etc. For more information, please
+ see http://nath323.sourceforge.net/.
+
+ If you want to compile it as a module, say 'M' here and read
+ Documentation/modules.txt. If unsure, say 'N'.
+
config IP_NF_QUEUE
- tristate "Userspace queueing via NETLINK"
+ tristate "IP Userspace queueing via NETLINK (OBSOLETE)"
help
Netfilter has the ability to queue packets to user space: the
netlink device can be used to access them using this driver.
+ This option enables the old IPv4-only "ip_queue" implementation
+ which has been obsoleted by the new "nfnetlink_queue" code (see
+ CONFIG_NETFILTER_NETLINK_QUEUE).
+
To compile it as a module, choose M here. If unsure, say N.
config IP_NF_IPTABLES
tristate "IP tables support (required for filtering/masq/NAT)"
+ depends on NETFILTER_XTABLES
help
iptables is a general, extensible packet identification framework.
The packet filtering and full NAT (masquerading, port forwarding,
To compile it as a module, choose M here. If unsure, say N.
-# The simple matches.
-config IP_NF_MATCH_LIMIT
- tristate "limit match support"
- depends on IP_NF_IPTABLES
- help
- limit matching allows you to control the rate at which a rule can be
- matched: mainly useful in combination with the LOG target ("LOG
- target support", below) and to avoid some Denial of Service attacks.
-
- To compile it as a module, choose M here. If unsure, say N.
-
+# The matches.
config IP_NF_MATCH_IPRANGE
tristate "IP range match support"
depends on IP_NF_IPTABLES
To compile it as a module, choose M here. If unsure, say N.
-config IP_NF_MATCH_MAC
- tristate "MAC address match support"
- depends on IP_NF_IPTABLES
- help
- MAC matching allows you to match packets based on the source
- Ethernet address of the packet.
-
- To compile it as a module, choose M here. If unsure, say N.
-
-config IP_NF_MATCH_PKTTYPE
- tristate "Packet type match support"
- depends on IP_NF_IPTABLES
- help
- Packet type matching allows you to match a packet by
- its "class", eg. BROADCAST, MULTICAST, ...
-
- Typical usage:
- iptables -A INPUT -m pkttype --pkt-type broadcast -j LOG
-
- To compile it as a module, choose M here. If unsure, say N.
-
-config IP_NF_MATCH_MARK
- tristate "netfilter MARK match support"
- depends on IP_NF_IPTABLES
- help
- Netfilter mark matching allows you to match packets based on the
- `nfmark' value in the packet. This can be set by the MARK target
- (see below).
-
- To compile it as a module, choose M here. If unsure, say N.
-
-config IP_NF_MATCH_MULTIPORT
- tristate "Multiple port match support"
- depends on IP_NF_IPTABLES
- help
- Multiport matching allows you to match TCP or UDP packets based on
- a series of source or destination ports: normally a rule can only
- match a single range of ports.
-
- To compile it as a module, choose M here. If unsure, say N.
-
config IP_NF_MATCH_TOS
tristate "TOS match support"
depends on IP_NF_IPTABLES
To compile it as a module, choose M here. If unsure, say N.
-config IP_NF_MATCH_AH_ESP
- tristate "AH/ESP match support"
+config IP_NF_MATCH_AH
+ tristate "AH match support"
depends on IP_NF_IPTABLES
help
- These two match extensions (`ah' and `esp') allow you to match a
- range of SPIs inside AH or ESP headers of IPSec packets.
-
- To compile it as a module, choose M here. If unsure, say N.
-
-config IP_NF_MATCH_LENGTH
- tristate "LENGTH match support"
- depends on IP_NF_IPTABLES
- help
- This option allows you to match the length of a packet against a
- specific value or range of values.
+ This match extension allows you to match a range of SPIs
+ inside AH header of IPSec packets.
To compile it as a module, choose M here. If unsure, say N.
To compile it as a module, choose M here. If unsure, say N.
-config IP_NF_MATCH_TCPMSS
- tristate "tcpmss match support"
- depends on IP_NF_IPTABLES
- help
- This option adds a `tcpmss' match, which allows you to examine the
- MSS value of TCP SYN packets, which control the maximum packet size
- for that connection.
-
- To compile it as a module, choose M here. If unsure, say N.
-
-config IP_NF_MATCH_HELPER
- tristate "Helper match support"
- depends on IP_NF_CONNTRACK && IP_NF_IPTABLES
- help
- Helper matching allows you to match packets in dynamic connections
- tracked by a conntrack-helper, ie. ip_conntrack_ftp
-
- To compile it as a module, choose M here. If unsure, say Y.
-
-config IP_NF_MATCH_STATE
- tristate "Connection state match support"
- depends on IP_NF_CONNTRACK && IP_NF_IPTABLES
- help
- Connection state matching allows you to match packets based on their
- relationship to a tracked connection (ie. previous packets). This
- is a powerful tool for packet classification.
-
- To compile it as a module, choose M here. If unsure, say N.
-
-config IP_NF_MATCH_CONNTRACK
- tristate "Connection tracking match support"
- depends on IP_NF_CONNTRACK && IP_NF_IPTABLES
- help
- This is a general conntrack match module, a superset of the state match.
-
- It allows matching on additional conntrack information, which is
- useful in complex configurations, such as NAT gateways with multiple
- internet links or tunnels.
-
- To compile it as a module, choose M here. If unsure, say N.
-
config IP_NF_MATCH_OWNER
tristate "Owner match support"
depends on IP_NF_IPTABLES
To compile it as a module, choose M here. If unsure, say N.
-config IP_NF_MATCH_PHYSDEV
- tristate "Physdev match support"
- depends on IP_NF_IPTABLES && BRIDGE_NETFILTER
+config IP_NF_MATCH_ADDRTYPE
+ tristate 'address type match support'
+ depends on IP_NF_IPTABLES
help
- Physdev packet matching matches against the physical bridge ports
- the IP packet arrived on or will leave by.
+ This option allows you to match what routing thinks of an address,
+ eg. UNICAST, LOCAL, BROADCAST, ...
+
+ If you want to compile it as a module, say M here and read
+ <file:Documentation/modules.txt>. If unsure, say `N'.
- To compile it as a module, choose M here. If unsure, say N.
+config IP_NF_MATCH_HASHLIMIT
+ tristate 'hashlimit match support'
+ depends on IP_NF_IPTABLES
+ help
+ This option adds a new iptables `hashlimit' match.
+
+ As opposed to `limit', this match dynamically crates a hash table
+ of limit buckets, based on your selection of source/destination
+ ip addresses and/or ports.
-# The targets
+ It enables you to express policies like `10kpps for any given
+ destination IP' or `500pps from any given source IP' with a single
+ IPtables rule.
+
+# `filter', generic and specific targets
config IP_NF_FILTER
tristate "Packet filtering"
depends on IP_NF_IPTABLES
To compile it as a module, choose M here. If unsure, say N.
+config IP_NF_TARGET_LOG
+ tristate "LOG target support"
+ depends on IP_NF_IPTABLES
+ help
+ This option adds a `LOG' target, which allows you to create rules in
+ any iptables table which records the packet header to the syslog.
+
+ To compile it as a module, choose M here. If unsure, say N.
+
+config IP_NF_TARGET_ULOG
+ tristate "ULOG target support"
+ depends on IP_NF_IPTABLES
+ ---help---
+
+ This option enables the old IPv4-only "ipt_ULOG" implementation
+ which has been obsoleted by the new "nfnetlink_log" code (see
+ CONFIG_NETFILTER_NETLINK_LOG).
+
+ This option adds a `ULOG' target, which allows you to create rules in
+ any iptables table. The packet is passed to a userspace logging
+ daemon using netlink multicast sockets; unlike the LOG target
+ which can only be viewed through syslog.
+
+ The apropriate userspace logging daemon (ulogd) may be obtained from
+ <http://www.gnumonks.org/projects/ulogd/>
+
+ To compile it as a module, choose M here. If unsure, say N.
+
+config IP_NF_TARGET_TCPMSS
+ tristate "TCPMSS target support"
+ depends on IP_NF_IPTABLES
+ ---help---
+ This option adds a `TCPMSS' target, which allows you to alter the
+ MSS value of TCP SYN packets, to control the maximum size for that
+ connection (usually limiting it to your outgoing interface's MTU
+ minus 40).
+
+ This is used to overcome criminally braindead ISPs or servers which
+ block ICMP Fragmentation Needed packets. The symptoms of this
+ problem are that everything works fine from your Linux
+ firewall/router, but machines behind it can never exchange large
+ packets:
+ 1) Web browsers connect, then hang with no data received.
+ 2) Small mail works fine, but large emails hang.
+ 3) ssh works fine, but scp hangs after initial handshaking.
+
+ Workaround: activate this option and add a rule to your firewall
+ configuration like:
+
+ iptables -A FORWARD -p tcp --tcp-flags SYN,RST SYN \
+ -j TCPMSS --clamp-mss-to-pmtu
+
+ To compile it as a module, choose M here. If unsure, say N.
+
+# NAT + specific targets
config IP_NF_NAT
tristate "Full NAT"
depends on IP_NF_IPTABLES && IP_NF_CONNTRACK
config IP_NF_NAT_NEEDED
bool
- depends on IP_NF_CONNTRACK!=y && IP_NF_IPTABLES!=y && (IP_NF_COMPAT_IPCHAINS!=y && IP_NF_COMPAT_IPFWADM || IP_NF_COMPAT_IPCHAINS) || IP_NF_IPTABLES && IP_NF_CONNTRACK && IP_NF_NAT
+ depends on IP_NF_NAT != n
default y
config IP_NF_TARGET_MASQUERADE
To compile it as a module, choose M here. If unsure, say N.
-config IP_NF_NAT_LOCAL
- bool "NAT of local connections (READ HELP)"
- depends on IP_NF_NAT
- help
- This option enables support for NAT of locally originated connections.
- Enable this if you need to use destination NAT on connections
- originating from local processes on the nat box itself.
-
- Please note that you will need a recent version (>= 1.2.6a)
- of the iptables userspace program in order to use this feature.
- See <http://www.iptables.org/> for download instructions.
-
- If unsure, say 'N'.
-
config IP_NF_NAT_SNMP_BASIC
tristate "Basic SNMP-ALG support (EXPERIMENTAL)"
depends on EXPERIMENTAL && IP_NF_NAT
default IP_NF_NAT if IP_NF_AMANDA=y
default m if IP_NF_AMANDA=m
+config IP_NF_NAT_PPTP
+ tristate
+ depends on IP_NF_NAT!=n && IP_NF_PPTP!=n
+ default IP_NF_NAT if IP_NF_PPTP=y
+ default m if IP_NF_PPTP=m
+
+config IP_NF_NAT_H323
+ tristate
+ depends on IP_NF_IPTABLES!=n && IP_NF_CONNTRACK!=n && IP_NF_NAT!=n
+ default IP_NF_NAT if IP_NF_H323=y
+ default m if IP_NF_H323=m
+
+# mangle + specific targets
config IP_NF_MANGLE
tristate "Packet mangling"
depends on IP_NF_IPTABLES
To compile it as a module, choose M here. If unsure, say N.
-config IP_NF_TARGET_MARK
- tristate "MARK target support"
- depends on IP_NF_MANGLE
- help
- This option adds a `MARK' target, which allows you to create rules
- in the `mangle' table which alter the netfilter mark (nfmark) field
- associated with the packet prior to routing. This can change
- the routing method (see `Use netfilter MARK value as routing
- key') and can also be used by other subsystems to change their
- behavior.
-
- To compile it as a module, choose M here. If unsure, say N.
-
-config IP_NF_TARGET_CLASSIFY
- tristate "CLASSIFY target support"
+config IP_NF_TARGET_TTL
+ tristate 'TTL target support'
depends on IP_NF_MANGLE
help
- This option adds a `CLASSIFY' target, which enables the user to set
- the priority of a packet. Some qdiscs can use this value for
- classification, among these are:
+ This option adds a `TTL' target, which enables the user to modify
+ the TTL value of the IP header.
- atm, cbq, dsmark, pfifo_fast, htb, prio
+ While it is safe to decrement/lower the TTL, this target also enables
+ functionality to increment and set the TTL value of the IP header to
+ arbitrary values. This is EXTREMELY DANGEROUS since you can easily
+ create immortal packets that loop forever on the network.
To compile it as a module, choose M here. If unsure, say N.
-config IP_NF_TARGET_LOG
- tristate "LOG target support"
- depends on IP_NF_IPTABLES
+config IP_NF_TARGET_CLUSTERIP
+ tristate "CLUSTERIP target support (EXPERIMENTAL)"
+ depends on IP_NF_MANGLE && EXPERIMENTAL
+ depends on (IP_NF_CONNTRACK && IP_NF_CONNTRACK_MARK) || (NF_CONNTRACK_MARK && NF_CONNTRACK_IPV4)
help
- This option adds a `LOG' target, which allows you to create rules in
- any iptables table which records the packet header to the syslog.
-
- To compile it as a module, choose M here. If unsure, say N.
-
-config IP_NF_TARGET_ULOG
- tristate "ULOG target support"
- depends on IP_NF_IPTABLES
- ---help---
- This option adds a `ULOG' target, which allows you to create rules in
- any iptables table. The packet is passed to a userspace logging
- daemon using netlink multicast sockets; unlike the LOG target
- which can only be viewed through syslog.
-
- The apropriate userspace logging daemon (ulogd) may be obtained from
- <http://www.gnumonks.org/projects/ulogd/>
-
+ The CLUSTERIP target allows you to build load-balancing clusters of
+ network servers without having a dedicated load-balancing
+ router/server/switch.
+
To compile it as a module, choose M here. If unsure, say N.
-config IP_NF_TARGET_TCPMSS
- tristate "TCPMSS target support"
+# raw + specific targets
+config IP_NF_RAW
+ tristate 'raw table support (required for NOTRACK/TRACE)'
depends on IP_NF_IPTABLES
- ---help---
- This option adds a `TCPMSS' target, which allows you to alter the
- MSS value of TCP SYN packets, to control the maximum size for that
- connection (usually limiting it to your outgoing interface's MTU
- minus 40).
-
- This is used to overcome criminally braindead ISPs or servers which
- block ICMP Fragmentation Needed packets. The symptoms of this
- problem are that everything works fine from your Linux
- firewall/router, but machines behind it can never exchange large
- packets:
- 1) Web browsers connect, then hang with no data received.
- 2) Small mail works fine, but large emails hang.
- 3) ssh works fine, but scp hangs after initial handshaking.
-
- Workaround: activate this option and add a rule to your firewall
- configuration like:
-
- iptables -A FORWARD -p tcp --tcp-flags SYN,RST SYN \
- -j TCPMSS --clamp-mss-to-pmtu
-
- To compile it as a module, choose M here. If unsure, say N.
+ help
+ This option adds a `raw' table to iptables. This table is the very
+ first in the netfilter framework and hooks in at the PREROUTING
+ and OUTPUT chains.
+
+ If you want to compile it as a module, say M here and read
+ <file:Documentation/modules.txt>. If unsure, say `N'.
+# ARP tables
config IP_NF_ARPTABLES
tristate "ARP tables support"
+ depends on NETFILTER_XTABLES
help
arptables is a general, extensible packet identification framework.
The ARP packet filtering and mangling (manipulation)subsystems
Allows altering the ARP packet payload: source and destination
hardware and network addresses.
-# Backwards compatibility modules: only if you don't build in the others.
-config IP_NF_COMPAT_IPCHAINS
- tristate "ipchains (2.2-style) support"
- depends on IP_NF_CONNTRACK!=y && IP_NF_IPTABLES!=y
+config IP_NF_SET
+ tristate "IP set support"
+ depends on INET && NETFILTER
help
- This option places ipchains (with masquerading and redirection
- support) back into the kernel, using the new netfilter
- infrastructure. It is not recommended for new installations (see
- `Packet filtering'). With this enabled, you should be able to use
- the ipchains tool exactly as in 2.2 kernels.
+ This option adds IP set support to the kernel.
+ In order to define and use sets, you need the userspace utility
+ ipset(8).
To compile it as a module, choose M here. If unsure, say N.
-config IP_NF_COMPAT_IPFWADM
- tristate "ipfwadm (2.0-style) support"
- depends on IP_NF_CONNTRACK!=y && IP_NF_IPTABLES!=y && IP_NF_COMPAT_IPCHAINS!=y
+config IP_NF_SET_MAX
+ int "Maximum number of IP sets"
+ default 256
+ range 2 65534
+ depends on IP_NF_SET
+ help
+ You can define here default value of the maximum number
+ of IP sets for the kernel.
+
+ The value can be overriden by the 'max_sets' module
+ parameter of the 'ip_set' module.
+
+config IP_NF_SET_HASHSIZE
+ int "Hash size for bindings of IP sets"
+ default 1024
+ depends on IP_NF_SET
+ help
+ You can define here default value of the hash size for
+ bindings of IP sets.
+
+ The value can be overriden by the 'hash_size' module
+ parameter of the 'ip_set' module.
+
+config IP_NF_SET_IPMAP
+ tristate "ipmap set support"
+ depends on IP_NF_SET
help
- This option places ipfwadm (with masquerading and redirection
- support) back into the kernel, using the new netfilter
- infrastructure. It is not recommended for new installations (see
- `Packet filtering'). With this enabled, you should be able to use
- the ipfwadm tool exactly as in 2.0 kernels.
+ This option adds the ipmap set type support.
To compile it as a module, choose M here. If unsure, say N.
-config IP_NF_TARGET_NOTRACK
- tristate 'NOTRACK target support'
- depends on IP_NF_RAW
+config IP_NF_SET_MACIPMAP
+ tristate "macipmap set support"
+ depends on IP_NF_SET
help
- The NOTRACK target allows a select rule to specify
- which packets *not* to enter the conntrack/NAT
- subsystem with all the consequences (no ICMP error tracking,
- no protocol helpers for the selected packets).
-
- If you want to compile it as a module, say M here and read
- <file:Documentation/modules.txt>. If unsure, say `N'.
+ This option adds the macipmap set type support.
-config IP_NF_RAW
- tristate 'raw table support (required for NOTRACK/TRACE)'
- depends on IP_NF_IPTABLES
+ To compile it as a module, choose M here. If unsure, say N.
+
+config IP_NF_SET_PORTMAP
+ tristate "portmap set support"
+ depends on IP_NF_SET
help
- This option adds a `raw' table to iptables. This table is the very
- first in the netfilter framework and hooks in at the PREROUTING
- and OUTPUT chains.
-
- If you want to compile it as a module, say M here and read
- <file:Documentation/modules.txt>. If unsure, say `N'.
- help
+ This option adds the portmap set type support.
+
+ To compile it as a module, choose M here. If unsure, say N.
+
+config IP_NF_SET_IPHASH
+ tristate "iphash set support"
+ depends on IP_NF_SET
+ help
+ This option adds the iphash set type support.
+
+ To compile it as a module, choose M here. If unsure, say N.
+
+config IP_NF_SET_NETHASH
+ tristate "nethash set support"
+ depends on IP_NF_SET
+ help
+ This option adds the nethash set type support.
+
+ To compile it as a module, choose M here. If unsure, say N.
+
+config IP_NF_SET_IPPORTHASH
+ tristate "ipporthash set support"
+ depends on IP_NF_SET
+ help
+ This option adds the ipporthash set type support.
+
+ To compile it as a module, choose M here. If unsure, say N.
+
+config IP_NF_SET_IPTREE
+ tristate "iptree set support"
+ depends on IP_NF_SET
+ help
+ This option adds the iptree set type support.
+
+ To compile it as a module, choose M here. If unsure, say N.
+
+config IP_NF_MATCH_SET
+ tristate "set match support"
+ depends on IP_NF_SET
+ help
+ Set matching matches against given IP sets.
+ You need the ipset utility to create and set up the sets.
+
+ To compile it as a module, choose M here. If unsure, say N.
+
+config IP_NF_TARGET_SET
+ tristate "SET target support"
+ depends on IP_NF_SET
+ help
+ The SET target makes possible to add/delete entries
+ in IP sets.
+ You need the ipset utility to create and set up the sets.
+
+ To compile it as a module, choose M here. If unsure, say N.
+
endmenu
git://git.onelab.eu / linux-2.6.git / blobdiff