/*
- * Copyright (c) 2008, 2009, 2010 Nicira Networks.
+ * Copyright (c) 2008, 2009, 2010, 2011 Nicira Networks.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
#include <arpa/inet.h>
#include <errno.h>
#include <inttypes.h>
+#include <sys/socket.h>
#include <net/if.h>
#include <string.h>
#include <stdlib.h>
+#include "classifier.h"
#include "dhcp.h"
#include "dpif.h"
#include "flow.h"
#include "netdev.h"
+#include "netlink.h"
#include "odp-util.h"
#include "ofproto.h"
#include "ofpbuf.h"
#include "openflow/openflow.h"
#include "packets.h"
#include "poll-loop.h"
-#include "status.h"
#include "timeval.h"
-
-#define THIS_MODULE VLM_in_band
#include "vlog.h"
-/* In-band control allows a single network to be used for OpenFlow
- * traffic and other data traffic. Refer to ovs-vswitchd.conf(5) and
- * secchan(8) for a description of configuring in-band control.
+VLOG_DEFINE_THIS_MODULE(in_band);
+
+/* In-band control allows a single network to be used for OpenFlow traffic and
+ * other data traffic. See ovs-vswitchd.conf.db(5) for a description of
+ * configuring in-band control.
*
* This comment is an attempt to describe how in-band control works at a
* wire- and implementation-level. Correctly implementing in-band
* In-band also sets up the following rules for each unique next-hop MAC
* address for the remotes' IPs (the "next hop" is either the remote
* itself, if it is on a local subnet, or the gateway to reach the remote):
- *
+ *
* (d) ARP replies to the next hop's MAC address.
* (e) ARP requests from the next hop's MAC address.
*
* The goal of these rules is to be as narrow as possible to allow a
* switch to join a network and be able to communicate with the
* remotes. As mentioned earlier, these rules have higher priority
- * than the controller's rules, so if they are too broad, they may
+ * than the controller's rules, so if they are too broad, they may
* prevent the controller from implementing its policy. As such,
* in-band actively monitors some aspects of flow and packet processing
* so that the rules can be made more precise.
* match entries, so in-band control is able to be very precise about
* the flows it prevents. Flows that miss in the datapath are sent to
* userspace to be processed, so preventing these flows from being
- * cached in the "fast path" does not affect correctness. The only type
- * of flow that is currently prevented is one that would prevent DHCP
- * replies from being seen by the local port. For example, a rule that
- * forwarded all DHCP traffic to the controller would not be allowed,
+ * cached in the "fast path" does not affect correctness. The only type
+ * of flow that is currently prevented is one that would prevent DHCP
+ * replies from being seen by the local port. For example, a rule that
+ * forwarded all DHCP traffic to the controller would not be allowed,
* but one that forwarded to all ports (including the local port) would.
*
* As mentioned earlier, packets that miss in the datapath are sent to
* the userspace for processing. The userspace has its own flow table,
- * the "classifier", so in-band checks whether any special processing
- * is needed before the classifier is consulted. If a packet is a DHCP
- * response to a request from the local port, the packet is forwarded to
- * the local port, regardless of the flow table. Note that this requires
- * L7 processing of DHCP replies to determine whether the 'chaddr' field
+ * the "classifier", so in-band checks whether any special processing
+ * is needed before the classifier is consulted. If a packet is a DHCP
+ * response to a request from the local port, the packet is forwarded to
+ * the local port, regardless of the flow table. Note that this requires
+ * L7 processing of DHCP replies to determine whether the 'chaddr' field
* matches the MAC address of the local port.
*
* It is interesting to note that for an L3-based in-band control
- * mechanism, the majority of rules are devoted to ARP traffic. At first
- * glance, some of these rules appear redundant. However, each serves an
- * important role. First, in order to determine the MAC address of the
- * remote side (controller or gateway) for other ARP rules, we must allow
- * ARP traffic for our local port with rules (b) and (c). If we are
- * between a switch and its connection to the remote, we have to
- * allow the other switch's ARP traffic to through. This is done with
+ * mechanism, the majority of rules are devoted to ARP traffic. At first
+ * glance, some of these rules appear redundant. However, each serves an
+ * important role. First, in order to determine the MAC address of the
+ * remote side (controller or gateway) for other ARP rules, we must allow
+ * ARP traffic for our local port with rules (b) and (c). If we are
+ * between a switch and its connection to the remote, we have to
+ * allow the other switch's ARP traffic to through. This is done with
* rules (d) and (e), since we do not know the addresses of the other
- * switches a priori, but do know the remote's or gateway's. Finally,
- * if the remote is running in a local guest VM that is not reached
- * through the local port, the switch that is connected to the VM must
- * allow ARP traffic based on the remote's IP address, since it will
- * not know the MAC address of the local port that is sending the traffic
+ * switches a priori, but do know the remote's or gateway's. Finally,
+ * if the remote is running in a local guest VM that is not reached
+ * through the local port, the switch that is connected to the VM must
+ * allow ARP traffic based on the remote's IP address, since it will
+ * not know the MAC address of the local port that is sending the traffic
* or the MAC address of the remote in the guest VM.
*
* With a few notable exceptions below, in-band should work in most
* network setups. The following are considered "supported' in the
- * current implementation:
+ * current implementation:
*
* - Locally Connected. The switch and remote are on the same
* subnet. This uses rules (a), (b), (c), (h), and (i).
* "Between Switch and Remote" configuration described earlier.
*
* - Remote on Local VM. The remote is a guest VM on the
- * system running in-band control. This uses rules (a), (b), (c),
+ * system running in-band control. This uses rules (a), (b), (c),
* (h), and (i).
*
* - Remote on Local VM with Different Networks. The remote
* IP address has not been configured for that port on the switch.
* As such, the switch will use eth0 to connect to the remote,
* and eth1's rules about the local port will not work. In the
- * example, the switch attached to eth0 would use rules (a), (b),
- * (c), (h), and (i) on eth0. The switch attached to eth1 would use
+ * example, the switch attached to eth0 would use rules (a), (b),
+ * (c), (h), and (i) on eth0. The switch attached to eth1 would use
* rules (f), (g), (h), and (i).
*
* The following are explicitly *not* supported by in-band control:
*
- * - Specify Remote by Name. Currently, the remote must be
+ * - Specify Remote by Name. Currently, the remote must be
* identified by IP address. A naive approach would be to permit
* all DNS traffic. Unfortunately, this would prevent the
* controller from defining any policy over DNS. Since switches
- * that are located behind us need to connect to the remote,
+ * that are located behind us need to connect to the remote,
* in-band cannot simply add a rule that allows DNS traffic from
* the local port. The "correct" way to support this is to parse
* DNS requests to allow all traffic related to a request for the
* the time-being.
*
* - Differing Remotes for Switches. All switches must know
- * the L3 addresses for all the remotes that other switches
+ * the L3 addresses for all the remotes that other switches
* may use, since rules need to be set up to allow traffic related
* to those remotes through. See rules (f), (g), (h), and (i).
*
- * - Differing Routes for Switches. In order for the switch to
- * allow other switches to connect to a remote through a
+ * - Differing Routes for Switches. In order for the switch to
+ * allow other switches to connect to a remote through a
* gateway, it allows the gateway's traffic through with rules (d)
* and (e). If the routes to the remote differ for the two
- * switches, we will not know the MAC address of the alternate
+ * switches, we will not know the MAC address of the alternate
* gateway.
*/
IBR_FROM_REMOTE_TCP /* (i) From remote IP, TCP port. */
};
-struct in_band_rule {
- flow_t flow;
- uint32_t wildcards;
- unsigned int priority;
-};
-
/* Track one remote IP and next hop information. */
struct in_band_remote {
struct sockaddr_in remote_addr; /* IP address, in network byte order. */
struct in_band {
struct ofproto *ofproto;
- struct status_category *ss_cat;
+ int queue_id, prev_queue_id;
/* Remote information. */
time_t next_remote_refresh; /* Refresh timer. */
return true;
}
-static void
-in_band_status_cb(struct status_reply *sr, void *in_band_)
-{
- struct in_band *in_band = in_band_;
-
- if (!eth_addr_is_zero(in_band->local_mac)) {
- status_reply_put(sr, "local-mac="ETH_ADDR_FMT,
- ETH_ADDR_ARGS(in_band->local_mac));
- }
-
- if (in_band->n_remotes
- && !eth_addr_is_zero(in_band->remotes[0].remote_mac)) {
- status_reply_put(sr, "remote-mac="ETH_ADDR_FMT,
- ETH_ADDR_ARGS(in_band->remotes[0].remote_mac));
- }
-}
-
/* Returns true if 'packet' should be sent to the local port regardless
- * of the flow table. */
+ * of the flow table. */
bool
-in_band_msg_in_hook(struct in_band *in_band, const flow_t *flow,
+in_band_msg_in_hook(struct in_band *in_band, const struct flow *flow,
const struct ofpbuf *packet)
{
if (!in_band) {
/* Regardless of how the flow table is configured, we want to be
* able to see replies to our DHCP requests. */
if (flow->dl_type == htons(ETH_TYPE_IP)
- && flow->nw_proto == IP_TYPE_UDP
+ && flow->nw_proto == IPPROTO_UDP
&& flow->tp_src == htons(DHCP_SERVER_PORT)
&& flow->tp_dst == htons(DHCP_CLIENT_PORT)
&& packet->l7) {
return false;
}
-/* Returns true if the rule that would match 'flow' with 'actions' is
+/* Returns true if the rule that would match 'flow' with 'actions' is
* allowed to be set up in the datapath. */
bool
-in_band_rule_check(struct in_band *in_band, const flow_t *flow,
- const struct odp_actions *actions)
+in_band_rule_check(struct in_band *in_band, const struct flow *flow,
+ const struct nlattr *actions, size_t actions_len)
{
if (!in_band) {
return true;
/* Don't allow flows that would prevent DHCP replies from being seen
* by the local port. */
if (flow->dl_type == htons(ETH_TYPE_IP)
- && flow->nw_proto == IP_TYPE_UDP
- && flow->tp_src == htons(DHCP_SERVER_PORT)
+ && flow->nw_proto == IPPROTO_UDP
+ && flow->tp_src == htons(DHCP_SERVER_PORT)
&& flow->tp_dst == htons(DHCP_CLIENT_PORT)) {
- int i;
+ const struct nlattr *a;
+ unsigned int left;
- for (i=0; i<actions->n_actions; i++) {
- if (actions->actions[i].output.type == ODPAT_OUTPUT
- && actions->actions[i].output.port == ODPP_LOCAL) {
+ NL_ATTR_FOR_EACH_UNSAFE (a, left, actions, actions_len) {
+ if (nl_attr_type(a) == ODP_ACTION_ATTR_OUTPUT
+ && nl_attr_get_u32(a) == ODPP_LOCAL) {
return true;
- }
+ }
}
return false;
}
return true;
}
-static void
-init_rule(struct in_band_rule *rule, unsigned int priority)
-{
- rule->wildcards = OVSFW_ALL;
- rule->priority = priority;
-
- /* Not strictly necessary but seems cleaner. */
- memset(&rule->flow, 0, sizeof rule->flow);
-}
-
-static void
-set_in_port(struct in_band_rule *rule, uint16_t odp_port)
-{
- rule->wildcards &= ~OFPFW_IN_PORT;
- rule->flow.in_port = odp_port;
-}
-
-static void
-set_dl_type(struct in_band_rule *rule, uint16_t dl_type)
-{
- rule->wildcards &= ~OFPFW_DL_TYPE;
- rule->flow.dl_type = dl_type;
-}
-
-static void
-set_dl_src(struct in_band_rule *rule, const uint8_t dl_src[ETH_ADDR_LEN])
-{
- rule->wildcards &= ~OFPFW_DL_SRC;
- memcpy(rule->flow.dl_src, dl_src, ETH_ADDR_LEN);
-}
-
-static void
-set_dl_dst(struct in_band_rule *rule, const uint8_t dl_dst[ETH_ADDR_LEN])
-{
- rule->wildcards &= ~OFPFW_DL_DST;
- memcpy(rule->flow.dl_dst, dl_dst, ETH_ADDR_LEN);
-}
-
-static void
-set_tp_src(struct in_band_rule *rule, uint16_t tp_src)
-{
- rule->wildcards &= ~OFPFW_TP_SRC;
- rule->flow.tp_src = tp_src;
-}
-
-static void
-set_tp_dst(struct in_band_rule *rule, uint16_t tp_dst)
-{
- rule->wildcards &= ~OFPFW_TP_DST;
- rule->flow.tp_dst = tp_dst;
-}
-
-static void
-set_nw_proto(struct in_band_rule *rule, uint8_t nw_proto)
-{
- rule->wildcards &= ~OFPFW_NW_PROTO;
- rule->flow.nw_proto = nw_proto;
-}
-
-static void
-set_nw_src(struct in_band_rule *rule, const struct in_addr nw_src)
-{
- rule->wildcards &= ~OFPFW_NW_SRC_MASK;
- rule->flow.nw_src = nw_src.s_addr;
-}
-
-static void
-set_nw_dst(struct in_band_rule *rule, const struct in_addr nw_dst)
-{
- rule->wildcards &= ~OFPFW_NW_DST_MASK;
- rule->flow.nw_dst = nw_dst.s_addr;
-}
-
static void
make_rules(struct in_band *ib,
- void (*cb)(struct in_band *, const struct in_band_rule *))
+ void (*cb)(struct in_band *, const struct cls_rule *))
{
- struct in_band_rule rule;
+ struct cls_rule rule;
size_t i;
if (!eth_addr_is_zero(ib->installed_local_mac)) {
/* (a) Allow DHCP requests sent from the local port. */
- init_rule(&rule, IBR_FROM_LOCAL_DHCP);
- set_in_port(&rule, ODPP_LOCAL);
- set_dl_type(&rule, htons(ETH_TYPE_IP));
- set_dl_src(&rule, ib->installed_local_mac);
- set_nw_proto(&rule, IP_TYPE_UDP);
- set_tp_src(&rule, htons(DHCP_CLIENT_PORT));
- set_tp_dst(&rule, htons(DHCP_SERVER_PORT));
+ cls_rule_init_catchall(&rule, IBR_FROM_LOCAL_DHCP);
+ cls_rule_set_in_port(&rule, ODPP_LOCAL);
+ cls_rule_set_dl_type(&rule, htons(ETH_TYPE_IP));
+ cls_rule_set_dl_src(&rule, ib->installed_local_mac);
+ cls_rule_set_nw_proto(&rule, IPPROTO_UDP);
+ cls_rule_set_tp_src(&rule, htons(DHCP_CLIENT_PORT));
+ cls_rule_set_tp_dst(&rule, htons(DHCP_SERVER_PORT));
cb(ib, &rule);
/* (b) Allow ARP replies to the local port's MAC address. */
- init_rule(&rule, IBR_TO_LOCAL_ARP);
- set_dl_type(&rule, htons(ETH_TYPE_ARP));
- set_dl_dst(&rule, ib->installed_local_mac);
- set_nw_proto(&rule, ARP_OP_REPLY);
+ cls_rule_init_catchall(&rule, IBR_TO_LOCAL_ARP);
+ cls_rule_set_dl_type(&rule, htons(ETH_TYPE_ARP));
+ cls_rule_set_dl_dst(&rule, ib->installed_local_mac);
+ cls_rule_set_nw_proto(&rule, ARP_OP_REPLY);
cb(ib, &rule);
/* (c) Allow ARP requests from the local port's MAC address. */
- init_rule(&rule, IBR_FROM_LOCAL_ARP);
- set_dl_type(&rule, htons(ETH_TYPE_ARP));
- set_dl_src(&rule, ib->installed_local_mac);
- set_nw_proto(&rule, ARP_OP_REQUEST);
+ cls_rule_init_catchall(&rule, IBR_FROM_LOCAL_ARP);
+ cls_rule_set_dl_type(&rule, htons(ETH_TYPE_ARP));
+ cls_rule_set_dl_src(&rule, ib->installed_local_mac);
+ cls_rule_set_nw_proto(&rule, ARP_OP_REQUEST);
cb(ib, &rule);
}
}
/* (d) Allow ARP replies to the next hop's MAC address. */
- init_rule(&rule, IBR_TO_NEXT_HOP_ARP);
- set_dl_type(&rule, htons(ETH_TYPE_ARP));
- set_dl_dst(&rule, remote_mac);
- set_nw_proto(&rule, ARP_OP_REPLY);
+ cls_rule_init_catchall(&rule, IBR_TO_NEXT_HOP_ARP);
+ cls_rule_set_dl_type(&rule, htons(ETH_TYPE_ARP));
+ cls_rule_set_dl_dst(&rule, remote_mac);
+ cls_rule_set_nw_proto(&rule, ARP_OP_REPLY);
cb(ib, &rule);
/* (e) Allow ARP requests from the next hop's MAC address. */
- init_rule(&rule, IBR_FROM_NEXT_HOP_ARP);
- set_dl_type(&rule, htons(ETH_TYPE_ARP));
- set_dl_src(&rule, remote_mac);
- set_nw_proto(&rule, ARP_OP_REQUEST);
+ cls_rule_init_catchall(&rule, IBR_FROM_NEXT_HOP_ARP);
+ cls_rule_set_dl_type(&rule, htons(ETH_TYPE_ARP));
+ cls_rule_set_dl_src(&rule, remote_mac);
+ cls_rule_set_nw_proto(&rule, ARP_OP_REQUEST);
cb(ib, &rule);
}
if (!i || a->sin_addr.s_addr != a[-1].sin_addr.s_addr) {
/* (f) Allow ARP replies containing the remote's IP address as a
* target. */
- init_rule(&rule, IBR_TO_REMOTE_ARP);
- set_dl_type(&rule, htons(ETH_TYPE_ARP));
- set_nw_proto(&rule, ARP_OP_REPLY);
- set_nw_dst(&rule, a->sin_addr);
+ cls_rule_init_catchall(&rule, IBR_TO_REMOTE_ARP);
+ cls_rule_set_dl_type(&rule, htons(ETH_TYPE_ARP));
+ cls_rule_set_nw_proto(&rule, ARP_OP_REPLY);
+ cls_rule_set_nw_dst(&rule, a->sin_addr.s_addr);
cb(ib, &rule);
/* (g) Allow ARP requests containing the remote's IP address as a
* source. */
- init_rule(&rule, IBR_FROM_REMOTE_ARP);
- set_dl_type(&rule, htons(ETH_TYPE_ARP));
- set_nw_proto(&rule, ARP_OP_REQUEST);
- set_nw_src(&rule, a->sin_addr);
+ cls_rule_init_catchall(&rule, IBR_FROM_REMOTE_ARP);
+ cls_rule_set_dl_type(&rule, htons(ETH_TYPE_ARP));
+ cls_rule_set_nw_proto(&rule, ARP_OP_REQUEST);
+ cls_rule_set_nw_src(&rule, a->sin_addr.s_addr);
cb(ib, &rule);
}
|| a->sin_addr.s_addr != a[-1].sin_addr.s_addr
|| a->sin_port != a[-1].sin_port) {
/* (h) Allow TCP traffic to the remote's IP and port. */
- init_rule(&rule, IBR_TO_REMOTE_TCP);
- set_dl_type(&rule, htons(ETH_TYPE_IP));
- set_nw_proto(&rule, IP_TYPE_TCP);
- set_nw_dst(&rule, a->sin_addr);
- set_tp_dst(&rule, a->sin_port);
+ cls_rule_init_catchall(&rule, IBR_TO_REMOTE_TCP);
+ cls_rule_set_dl_type(&rule, htons(ETH_TYPE_IP));
+ cls_rule_set_nw_proto(&rule, IPPROTO_TCP);
+ cls_rule_set_nw_dst(&rule, a->sin_addr.s_addr);
+ cls_rule_set_tp_dst(&rule, a->sin_port);
cb(ib, &rule);
/* (i) Allow TCP traffic from the remote's IP and port. */
- init_rule(&rule, IBR_FROM_REMOTE_TCP);
- set_dl_type(&rule, htons(ETH_TYPE_IP));
- set_nw_proto(&rule, IP_TYPE_TCP);
- set_nw_src(&rule, a->sin_addr);
- set_tp_src(&rule, a->sin_port);
+ cls_rule_init_catchall(&rule, IBR_FROM_REMOTE_TCP);
+ cls_rule_set_dl_type(&rule, htons(ETH_TYPE_IP));
+ cls_rule_set_nw_proto(&rule, IPPROTO_TCP);
+ cls_rule_set_nw_src(&rule, a->sin_addr.s_addr);
+ cls_rule_set_tp_src(&rule, a->sin_port);
cb(ib, &rule);
}
}
}
static void
-drop_rule(struct in_band *ib, const struct in_band_rule *rule)
+drop_rule(struct in_band *ib, const struct cls_rule *rule)
{
- ofproto_delete_flow(ib->ofproto, &rule->flow,
- rule->wildcards, rule->priority);
+ ofproto_delete_flow(ib->ofproto, rule);
}
/* Drops from the flow table all of the flows set up by 'ib', then clears out
}
static void
-add_rule(struct in_band *ib, const struct in_band_rule *rule)
+add_rule(struct in_band *ib, const struct cls_rule *rule)
{
- union ofp_action action;
-
- action.type = htons(OFPAT_OUTPUT);
- action.output.len = htons(sizeof action);
- action.output.port = htons(OFPP_NORMAL);
- action.output.max_len = htons(0);
- ofproto_add_flow(ib->ofproto, &rule->flow, rule->wildcards,
- rule->priority, &action, 1, 0);
+ struct {
+ struct nx_action_set_queue nxsq;
+ struct ofp_action_output oao;
+ } actions;
+
+ memset(&actions, 0, sizeof actions);
+
+ actions.oao.type = htons(OFPAT_OUTPUT);
+ actions.oao.len = htons(sizeof actions.oao);
+ actions.oao.port = htons(OFPP_NORMAL);
+ actions.oao.max_len = htons(0);
+
+ if (ib->queue_id < 0) {
+ ofproto_add_flow(ib->ofproto, rule,
+ (union ofp_action *) &actions.oao, 1);
+ } else {
+ actions.nxsq.type = htons(OFPAT_VENDOR);
+ actions.nxsq.len = htons(sizeof actions.nxsq);
+ actions.nxsq.vendor = htonl(NX_VENDOR_ID);
+ actions.nxsq.subtype = htons(NXAST_SET_QUEUE);
+ actions.nxsq.queue_id = htonl(ib->queue_id);
+
+ ofproto_add_flow(ib->ofproto, rule, (union ofp_action *) &actions,
+ sizeof actions / sizeof(union ofp_action));
+ }
}
/* Inserts flows into the flow table for the current state of 'ib'. */
static int
compare_macs(const void *a, const void *b)
{
- return memcmp(a, b, ETH_ADDR_LEN);
+ return eth_addr_compare_3way(a, b);
}
void
in_band_run(struct in_band *ib)
{
+ bool local_change, remote_change, queue_id_change;
struct in_band_remote *r;
- bool local_change, remote_change;
local_change = refresh_local(ib);
remote_change = refresh_remotes(ib);
- if (!local_change && !remote_change) {
+ queue_id_change = ib->queue_id != ib->prev_queue_id;
+ if (!local_change && !remote_change && !queue_id_change) {
/* Nothing changed, nothing to do. */
return;
}
+ ib->prev_queue_id = ib->queue_id;
/* Drop old rules. */
drop_rules(ib);
int
in_band_create(struct ofproto *ofproto, struct dpif *dpif,
- struct switch_status *ss, struct in_band **in_bandp)
+ struct in_band **in_bandp)
{
struct in_band *in_band;
char local_name[IF_NAMESIZE];
struct netdev *local_netdev;
int error;
+ *in_bandp = NULL;
error = dpif_port_get_name(dpif, ODPP_LOCAL,
local_name, sizeof local_name);
if (error) {
in_band = xzalloc(sizeof *in_band);
in_band->ofproto = ofproto;
- in_band->ss_cat = switch_status_register(ss, "in-band",
- in_band_status_cb, in_band);
+ in_band->queue_id = in_band->prev_queue_id = -1;
in_band->next_remote_refresh = TIME_MIN;
in_band->next_local_refresh = TIME_MIN;
in_band->local_netdev = local_netdev;
if (ib) {
drop_rules(ib);
in_band_set_remotes(ib, NULL, 0);
- switch_status_unregister(ib->ss_cat);
netdev_close(ib->local_netdev);
free(ib);
}
/* Force refresh in next call to in_band_run(). */
ib->next_remote_refresh = TIME_MIN;
}
+
+/* Sets the OpenFlow queue used by flows set up by 'ib' to 'queue_id'. If
+ * 'queue_id' is negative, 'ib' will not set any queue (which is also the
+ * default). */
+void
+in_band_set_queue(struct in_band *ib, int queue_id)
+{
+ ib->queue_id = queue_id;
+}
+
git://git.onelab.eu / sliver-openvswitch.git / blobdiff