# More hacking for modularisation.
#
# Prompt user for primary drivers.
+
+config OBSOLETE_OSS_DRIVER
+ bool "Obsolete OSS drivers"
+ depends on SOUND_PRIME
+ help
+ This option enables support for obsolete OSS drivers that
+ have been removed in kernel 2.6.17.
+
+ If unsure, say N.
+
config SOUND_BT878
tristate "BT878 audio dma"
- depends on SOUND_PRIME!=n && SOUND
+ depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
---help---
Audio DMA support for bt878 based grabber boards. As you might have
already noticed, bt878 is listed with two functions in /proc/pci.
config SOUND_CMPCI
tristate "C-Media PCI (CMI8338/8738)"
- depends on SOUND_PRIME!=n && SOUND && PCI
+ depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
help
Say Y or M if you have a PCI sound card using the CMI8338
or the CMI8738 chipset. Data on these chips are available at
config SOUND_CMPCI_JOYSTICK
bool "Enable joystick"
- depends on SOUND_CMPCI && X86
+ depends on SOUND_CMPCI && X86 && (GAMEPORT=y || SOUND_CMPCI=GAMEPORT)
help
Say Y here in order to enable the joystick port on a sound card using
the CMI8338 or the CMI8738 chipset. You need to config the
config SOUND_EMU10K1
tristate "Creative SBLive! (EMU10K1)"
- depends on SOUND_PRIME!=n && SOUND && PCI
+ depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
---help---
Say Y or M if you have a PCI sound card using the EMU10K1 chipset,
such as the Creative SBLive!, SB PCI512 or Emu-APS.
config MIDI_EMU10K1
bool "Creative SBLive! MIDI (EXPERIMENTAL)"
- depends on SOUND_EMU10K1 && EXPERIMENTAL
+ depends on SOUND_EMU10K1 && EXPERIMENTAL && ISA_DMA_API
help
Say Y if you want to be able to use the OSS /dev/sequencer
interface. This code is still experimental.
config SOUND_FUSION
tristate "Crystal SoundFusion (CS4280/461x)"
- depends on SOUND_PRIME!=n && SOUND
+ depends on SOUND_PRIME && PCI
help
This module drives the Crystal SoundFusion devices (CS4280/46xx
series) when wired as native sound drivers with AC97 codecs. If
config SOUND_CS4281
tristate "Crystal Sound CS4281"
- depends on SOUND_PRIME!=n && SOUND
+ depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
help
Picture and feature list at
<http://www.pcbroker.com/crystal4281.html>.
+config SOUND_BCM_CS4297A
+ tristate "Crystal Sound CS4297a (for Swarm)"
+ depends on SOUND_PRIME && SIBYTE_SWARM
+ help
+ The BCM91250A has a Crystal CS4297a on synchronous serial
+ port B (in addition to the DB-9 serial port). Say Y or M
+ here to enable the sound chip instead of the UART. Also
+ note that CONFIG_KGDB should not be enabled at the same
+ time, since it also attempts to use this UART port.
+
config SOUND_ES1370
tristate "Ensoniq AudioPCI (ES1370)"
- depends on SOUND_PRIME!=n && SOUND && PCI && SOUND_GAMEPORT
+ depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
help
Say Y or M if you have a PCI sound card utilizing the Ensoniq
ES1370 chipset, such as Ensoniq's AudioPCI (non-97). To find
config SOUND_ES1371
tristate "Creative Ensoniq AudioPCI 97 (ES1371)"
- depends on SOUND_PRIME!=n && SOUND && PCI && SOUND_GAMEPORT
+ depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
help
Say Y or M if you have a PCI sound card utilizing the Ensoniq
ES1371 chipset, such as Ensoniq's AudioPCI97. To find out if
<file:Documentation/sound/oss/es1371>.
config SOUND_ESSSOLO1
- tristate "ESS Technology Solo1"
- depends on SOUND_PRIME!=n && SOUND && SOUND_GAMEPORT
+ tristate "ESS Technology Solo1"
+ depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
help
Say Y or M if you have a PCI sound card utilizing the ESS Technology
Solo1 chip. To find out if your sound card uses a
config SOUND_MAESTRO
tristate "ESS Maestro, Maestro2, Maestro2E driver"
- depends on SOUND_PRIME!=n && SOUND
+ depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
help
Say Y or M if you have a sound system driven by ESS's Maestro line
of PCI sound chips. These include the Maestro 1, Maestro 2, and
config SOUND_MAESTRO3
tristate "ESS Maestro3/Allegro driver (EXPERIMENTAL)"
- depends on SOUND_PRIME!=n && SOUND && PCI && EXPERIMENTAL
+ depends on SOUND_PRIME && PCI && EXPERIMENTAL && OBSOLETE_OSS_DRIVER
help
Say Y or M if you have a sound system driven by ESS's Maestro 3
PCI sound chip.
config SOUND_ICH
tristate "Intel ICH (i8xx) audio support"
- depends on SOUND_PRIME!=n && PCI
+ depends on SOUND_PRIME && PCI
help
Support for integral audio in Intel's I/O Controller Hub (ICH)
chipset, as used on the 810/820/840 motherboards.
config SOUND_HARMONY
tristate "PA Harmony audio driver"
- depends on GSC_LASI && SOUND
+ depends on GSC_LASI && SOUND_PRIME && OBSOLETE_OSS_DRIVER
+ help
+ Say 'Y' or 'M' to include support for Harmony soundchip
+ on HP 712, 715/new and many other GSC based machines.
config SOUND_SONICVIBES
tristate "S3 SonicVibes"
- depends on SOUND_PRIME!=n && SOUND && SOUND_GAMEPORT
+ depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
help
Say Y or M if you have a PCI sound card utilizing the S3
SonicVibes chipset. To find out if your sound card uses a
config SOUND_VWSND
tristate "SGI Visual Workstation Sound"
- depends on SOUND_PRIME!=n && X86_VISWS && SOUND
+ depends on SOUND_PRIME && X86_VISWS
help
Say Y or M if you have an SGI Visual Workstation and you want to be
able to use its on-board audio. Read
config SOUND_HAL2
tristate "SGI HAL2 sound (EXPERIMENTAL)"
- depends on SGI_IP22 && SOUND && EXPERIMENTAL
+ depends on SOUND_PRIME && SGI_IP22 && EXPERIMENTAL
+ help
+ Say Y or M if you have an SGI Indy system and want to be able to
+ use it's on-board A2 audio system.
+
+config SOUND_IT8172
+ tristate "IT8172G Sound"
+ depends on SOUND_PRIME && (MIPS_ITE8172 || MIPS_IVR)
config SOUND_VRC5477
tristate "NEC Vrc5477 AC97 sound"
- depends on SOUND_PRIME!=n && DDB5477 && SOUND
+ depends on SOUND_PRIME && DDB5477
help
Say Y here to enable sound support for the NEC Vrc5477 chip, an
integrated, multi-function controller chip for MIPS CPUs. Works
with the AC97 codec.
+config SOUND_AU1000
+ tristate "Au1000 Sound"
+ depends on SOUND_PRIME && (SOC_AU1000 || SOC_AU1100 || SOC_AU1500) && OBSOLETE_OSS_DRIVER
+
+config SOUND_AU1550_AC97
+ tristate "Au1550 AC97 Sound"
+ depends on SOUND_PRIME && SOC_AU1550
+
config SOUND_TRIDENT
tristate "Trident 4DWave DX/NX, SiS 7018 or ALi 5451 PCI Audio Core"
- depends on SOUND_PRIME!=n && SOUND && SOUND_GAMEPORT
+ depends on SOUND_PRIME && PCI
---help---
Say Y or M if you have a PCI sound card utilizing the Trident
4DWave-DX/NX chipset or your mother board chipset has SiS 7018
config SOUND_MSNDCLAS
tristate "Support for Turtle Beach MultiSound Classic, Tahiti, Monterey"
- depends on SOUND_PRIME!=n && SOUND && (m || !STANDALONE)
+ depends on SOUND_PRIME && (m || !STANDALONE)
help
Say M here if you have a Turtle Beach MultiSound Classic, Tahiti or
Monterey (not for the Pinnacle or Fiji).
config SOUND_MSNDPIN
tristate "Support for Turtle Beach MultiSound Pinnacle, Fiji"
- depends on SOUND_PRIME!=n && SOUND && (m || !STANDALONE)
+ depends on SOUND_PRIME && (m || !STANDALONE)
help
Say M here if you have a Turtle Beach MultiSound Pinnacle or Fiji.
See <file:Documentation/sound/oss/MultiSound> for important information
depends on MSNDPIN_NONPNP
default "0"
help
- Iinterrupt request number for the Kurzweil daughterboard
+ Interrupt request number for the Kurzweil daughterboard
synthesizer on MultiSound Pinnacle and Fiji sound cards.
config MSNDPIN_IDE_IO0
config SOUND_VIA82CXXX
tristate "VIA 82C686 Audio Codec"
- depends on SOUND_PRIME!=n && PCI
+ depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
help
Say Y here to include support for the audio codec found on VIA
82Cxxx-based chips. Typically these are built into a motherboard.
config MIDI_VIA82CXXX
bool "VIA 82C686 MIDI"
- depends on SOUND_VIA82CXXX
+ depends on SOUND_VIA82CXXX && ISA_DMA_API
help
Answer Y to use the MIDI interface of the Via686. You may need to
enable this in the BIOS before it will work. This is for connection
config SOUND_OSS
tristate "OSS sound modules"
- depends on SOUND_PRIME!=n && SOUND
+ depends on SOUND_PRIME && ISA_DMA_API
help
OSS is the Open Sound System suite of sound card drivers. They make
sound programming easier since they provide a common API. Say Y or
config SOUND_AD1889
tristate "AD1889 based cards (AD1819 codec) (EXPERIMENTAL)"
- depends on EXPERIMENTAL && SOUND_OSS
+ depends on EXPERIMENTAL && SOUND_OSS && PCI
help
Say M here if you have a sound card based on the Analog Devices
AD1889 chip.
config SOUND_SGALAXY
tristate "Aztech Sound Galaxy (non-PnP) cards"
- depends on SOUND_OSS
+ depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
help
This module initializes the older non Plug and Play sound galaxy
cards from Aztech. It supports the Waverider Pro 32 - 3D and the
config SOUND_CS4232
tristate "Crystal CS4232 based (PnP) cards"
- depends on SOUND_OSS
+ depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
help
Say Y here if you have a card based on the Crystal CS4232 chip set,
which uses its own Plug and Play protocol.
config SOUND_GUS
tristate "Gravis Ultrasound support"
- depends on SOUND_OSS
+ depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
help
Say Y here for any type of Gravis Ultrasound card, including the GUS
or GUS MAX. See also <file:Documentation/sound/oss/ultrasound> for more
config SOUND_NM256
tristate "NM256AV/NM256ZX audio support"
- depends on SOUND_OSS
+ depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
help
Say M here to include audio support for the NeoMagic 256AV/256ZX
chipsets. These are the audio chipsets found in the Sony
config SOUND_MAD16
tristate "OPTi MAD16 and/or Mozart based cards"
- depends on SOUND_OSS && SOUND_GAMEPORT
+ depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
---help---
Answer Y if your card has a Mozart (OAK OTI-601) or MAD16 (OPTi
82C928 or 82C929 or 82C931) audio interface chip. These chips are
config SOUND_AWE32_SYNTH
tristate "AWE32 synth"
- depends on SOUND_OSS
+ depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
help
Say Y here if you have a Sound Blaster SB32, AWE32-PnP, SB AWE64 or
similar sound card. See <file:Documentation/sound/oss/README.awe>,
config SOUND_WAVEFRONT
tristate "Full support for Turtle Beach WaveFront (Tropez Plus, Tropez, Maui) synth/soundcards"
- depends on SOUND_OSS && m
+ depends on SOUND_OSS && m && OBSOLETE_OSS_DRIVER
help
Answer Y or M if you have a Tropez Plus, Tropez or Maui sound card
and read the files <file:Documentation/sound/oss/Wavefront> and
config SOUND_MAUI
tristate "Limited support for Turtle Beach Wave Front (Maui, Tropez) synthesizers"
- depends on SOUND_OSS
+ depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
help
Say Y here if you have a Turtle Beach Wave Front, Maui, or Tropez
sound card.
config SOUND_YM3812
tristate "Yamaha FM synthesizer (YM3812/OPL-3) support"
- depends on SOUND_OSS
+ depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
---help---
Answer Y if your card has a FM chip made by Yamaha (OPL2/OPL3/OPL4).
Answering Y is usually a safe and recommended choice, however some
config SOUND_OPL3SA1
tristate "Yamaha OPL3-SA1 audio controller"
- depends on SOUND_OSS
+ depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
help
Say Y or M if you have a Yamaha OPL3-SA1 sound chip, which is
usually built into motherboards. Read
config SOUND_YMFPCI
tristate "Yamaha YMF7xx PCI audio (native mode)"
- depends on SOUND_OSS && PCI
+ depends on SOUND_OSS && PCI && OBSOLETE_OSS_DRIVER
help
Support for Yamaha cards including the YMF711, YMF715, YMF718,
YMF719, YMF724, Waveforce 192XG, and Waveforce 192 Digital.
config SOUND_TVMIXER
tristate "TV card (bt848) mixer support"
- depends on SOUND_PRIME!=n && SOUND && I2C
+ depends on SOUND_PRIME && I2C
help
Support for audio mixer facilities on the BT848 TV frame-grabber
card.
config SOUND_ALI5455
tristate "ALi5455 audio support"
- depends on SOUND_PRIME!=n && PCI
+ depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
config SOUND_FORTE
tristate "ForteMedia FM801 driver"
- depends on SOUND_PRIME!=n && PCI
+ depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
help
Say Y or M if you want driver support for the ForteMedia FM801 PCI
audio controller (Abit AU10, Genius Sound Maker, HP Workstation
config SOUND_RME96XX
tristate "RME Hammerfall (RME96XX) support"
- depends on SOUND_PRIME!=n && PCI
+ depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
help
Say Y or M if you have a Hammerfall or Hammerfall light
- multichannel card from RME. If you want to acess advanced
- features of the card, read Documentation/sound/oss/rme96xx.
+ multichannel card from RME. If you want to access advanced
+ features of the card, read <file:Documentation/sound/oss/rme96xx>.
config SOUND_AD1980
tristate "AD1980 front/back switch plugin"
- depends on SOUND_PRIME!=n
+ depends on SOUND_PRIME && OBSOLETE_OSS_DRIVER
config SOUND_SH_DAC_AUDIO
tristate "SuperH DAC audio support"
- depends on SOUND_PRIME!=n && SOUND && CPU_SH3
+ depends on SOUND_PRIME && CPU_SH3
config SOUND_SH_DAC_AUDIO_CHANNEL
int " DAC channel"
git://git.onelab.eu / linux-2.6.git / blobdiff