#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/moduleparam.h>
+#include <linux/bitops.h>
#include <asm/io.h>
-#include <asm/bitops.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* ID for this card */
static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP; /* Enable this card */
static int digital_rate[SNDRV_CARDS] = { [0 ... (SNDRV_CARDS-1)] = 0 }; /* digital input rate */
-static int boot_devs;
+static int load_all; /* allow to load the non-whitelisted cards */
-module_param_array(index, int, boot_devs, 0444);
+module_param_array(index, int, NULL, 0444);
MODULE_PARM_DESC(index, "Index value for Bt87x soundcard");
-module_param_array(id, charp, boot_devs, 0444);
+module_param_array(id, charp, NULL, 0444);
MODULE_PARM_DESC(id, "ID string for Bt87x soundcard");
-module_param_array(enable, bool, boot_devs, 0444);
+module_param_array(enable, bool, NULL, 0444);
MODULE_PARM_DESC(enable, "Enable Bt87x soundcard");
-module_param_array(digital_rate, int, boot_devs, 0444);
+module_param_array(digital_rate, int, NULL, 0444);
MODULE_PARM_DESC(digital_rate, "Digital input rate for Bt87x soundcard");
+module_param(load_all, bool, 0444);
+MODULE_PARM_DESC(load_all, "Allow to load the non-whitelisted cards");
#ifndef PCI_VENDOR_ID_BROOKTREE
#define RISC_SYNC_FM1 0x6
#define RISC_SYNC_VRO 0xc
+#define ANALOG_CLOCK 1792000
+#ifdef CONFIG_SND_BT87X_OVERCLOCK
+#define CLOCK_DIV_MIN 1
+#else
+#define CLOCK_DIV_MIN 4
+#endif
+#define CLOCK_DIV_MAX 15
+
#define ERROR_INTERRUPTS (INT_FBUS | INT_FTRGT | INT_PPERR | \
INT_RIPERR | INT_PABORT | INT_OCERR)
#define MY_INTERRUPTS (INT_RISCI | ERROR_INTERRUPTS)
snd_card_t *card;
struct pci_dev *pci;
- void *mmio;
+ void __iomem *mmio;
int irq;
int dig_rate;
unsigned int lines;
u32 reg_control;
+ u32 interrupt_mask;
+
int current_line;
+
+ int pci_parity_errors;
};
enum { DEVICE_DIGITAL, DEVICE_ANALOG };
}
}
+static void snd_bt87x_pci_error(bt87x_t *chip, unsigned int status)
+{
+ u16 pci_status;
+
+ pci_read_config_word(chip->pci, PCI_STATUS, &pci_status);
+ pci_status &= PCI_STATUS_PARITY | PCI_STATUS_SIG_TARGET_ABORT |
+ PCI_STATUS_REC_TARGET_ABORT | PCI_STATUS_REC_MASTER_ABORT |
+ PCI_STATUS_SIG_SYSTEM_ERROR | PCI_STATUS_DETECTED_PARITY;
+ pci_write_config_word(chip->pci, PCI_STATUS, pci_status);
+ if (pci_status != PCI_STATUS_DETECTED_PARITY)
+ snd_printk(KERN_ERR "Aieee - PCI error! status %#08x, PCI status %#04x\n",
+ status & ERROR_INTERRUPTS, pci_status);
+ else {
+ snd_printk(KERN_ERR "Aieee - PCI parity error detected!\n");
+ /* error 'handling' similar to aic7xxx_pci.c: */
+ chip->pci_parity_errors++;
+ if (chip->pci_parity_errors > 20) {
+ snd_printk(KERN_ERR "Too many PCI parity errors observed.\n");
+ snd_printk(KERN_ERR "Some device on this bus is generating bad parity.\n");
+ snd_printk(KERN_ERR "This is an error *observed by*, not *generated by*, this card.\n");
+ snd_printk(KERN_ERR "PCI parity error checking has been disabled.\n");
+ chip->interrupt_mask &= ~(INT_PPERR | INT_RIPERR);
+ snd_bt87x_writel(chip, REG_INT_MASK, chip->interrupt_mask);
+ }
+ }
+}
+
static irqreturn_t snd_bt87x_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
bt87x_t *chip = dev_id;
- unsigned int status;
+ unsigned int status, irq_status;
status = snd_bt87x_readl(chip, REG_INT_STAT);
- if (!(status & MY_INTERRUPTS))
+ irq_status = status & chip->interrupt_mask;
+ if (!irq_status)
return IRQ_NONE;
- snd_bt87x_writel(chip, REG_INT_STAT, status & MY_INTERRUPTS);
+ snd_bt87x_writel(chip, REG_INT_STAT, irq_status);
- if (status & ERROR_INTERRUPTS) {
- if (status & (INT_FBUS | INT_FTRGT))
+ if (irq_status & ERROR_INTERRUPTS) {
+ if (irq_status & (INT_FBUS | INT_FTRGT))
snd_printk(KERN_WARNING "FIFO overrun, status %#08x\n", status);
- if (status & INT_OCERR)
+ if (irq_status & INT_OCERR)
snd_printk(KERN_ERR "internal RISC error, status %#08x\n", status);
- if (status & (INT_PPERR | INT_RIPERR | INT_PABORT)) {
- u16 pci_status;
- pci_read_config_word(chip->pci, PCI_STATUS, &pci_status);
- pci_write_config_word(chip->pci, PCI_STATUS, pci_status &
- (PCI_STATUS_PARITY | PCI_STATUS_SIG_TARGET_ABORT |
- PCI_STATUS_REC_TARGET_ABORT | PCI_STATUS_REC_MASTER_ABORT |
- PCI_STATUS_SIG_SYSTEM_ERROR | PCI_STATUS_DETECTED_PARITY));
- snd_printk(KERN_ERR "Aieee - PCI error! status %#08x, PCI status %#04x\n",
- status, pci_status);
- }
+ if (irq_status & (INT_PPERR | INT_RIPERR | INT_PABORT))
+ snd_bt87x_pci_error(chip, irq_status);
}
- if (status & INT_RISCI) {
+ if ((irq_status & INT_RISCI) && (chip->reg_control & CTL_ACAP_EN)) {
int current_block, irq_block;
/* assume that exactly one line has been recorded */
SNDRV_PCM_INFO_MMAP_VALID,
.formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S8,
.rates = SNDRV_PCM_RATE_KNOT,
- .rate_min = 119466,
- .rate_max = 448000,
+ .rate_min = ANALOG_CLOCK / CLOCK_DIV_MAX,
+ .rate_max = ANALOG_CLOCK / CLOCK_DIV_MIN,
.channels_min = 1,
.channels_max = 1,
.buffer_bytes_max = 255 * 4092,
static int snd_bt87x_set_analog_hw(bt87x_t *chip, snd_pcm_runtime_t *runtime)
{
static ratnum_t analog_clock = {
- .num = 1792000,
- .den_min = 4,
- .den_max = 15,
+ .num = ANALOG_CLOCK,
+ .den_min = CLOCK_DIV_MIN,
+ .den_max = CLOCK_DIV_MAX,
.den_step = 1
};
static snd_pcm_hw_constraint_ratnums_t constraint_rates = {
spin_lock_irq(&chip->reg_lock);
chip->reg_control &= ~(CTL_DA_SDR_MASK | CTL_DA_SBR);
- decimation = (1792000 + runtime->rate / 4) / runtime->rate;
+ decimation = (ANALOG_CLOCK + runtime->rate / 4) / runtime->rate;
chip->reg_control |= decimation << CTL_DA_SDR_SHIFT;
if (runtime->format == SNDRV_PCM_FORMAT_S8)
chip->reg_control |= CTL_DA_SBR;
snd_bt87x_writel(chip, REG_RISC_STRT_ADD, chip->dma_risc.addr);
snd_bt87x_writel(chip, REG_PACKET_LEN,
chip->line_bytes | (chip->lines << 16));
- snd_bt87x_writel(chip, REG_INT_MASK, MY_INTERRUPTS);
+ snd_bt87x_writel(chip, REG_INT_MASK, chip->interrupt_mask);
snd_bt87x_writel(chip, REG_GPIO_DMA_CTL, chip->reg_control);
spin_unlock(&chip->reg_lock);
return 0;
if (chip->irq >= 0)
free_irq(chip->irq, chip);
pci_release_regions(chip->pci);
+ pci_disable_device(chip->pci);
kfree(chip);
return 0;
}
return err;
chip = kcalloc(1, sizeof(*chip), GFP_KERNEL);
- if (!chip)
+ if (!chip) {
+ pci_disable_device(pci);
return -ENOMEM;
+ }
chip->card = card;
chip->pci = pci;
chip->irq = -1;
if ((err = pci_request_regions(pci, "Bt87x audio")) < 0) {
kfree(chip);
+ pci_disable_device(pci);
return err;
}
chip->mmio = ioremap_nocache(pci_resource_start(pci, 0),
}
chip->reg_control = CTL_DA_ES2 | CTL_PKTP_16 | (15 << CTL_DA_SDR_SHIFT);
+ chip->interrupt_mask = MY_INTERRUPTS;
snd_bt87x_writel(chip, REG_GPIO_DMA_CTL, chip->reg_control);
snd_bt87x_writel(chip, REG_INT_MASK, 0);
snd_bt87x_writel(chip, REG_INT_STAT, MY_INTERRUPTS);
return 0;
}
+#define BT_DEVICE(chip, subvend, subdev, rate) \
+ { .vendor = PCI_VENDOR_ID_BROOKTREE, \
+ .device = PCI_DEVICE_ID_BROOKTREE_##chip, \
+ .subvendor = subvend, .subdevice = subdev, \
+ .driver_data = rate }
+
+/* driver_data is the default digital_rate value for that device */
+static struct pci_device_id snd_bt87x_ids[] = {
+ BT_DEVICE(878, 0x0070, 0x13eb, 32000), /* Hauppauge WinTV series */
+ BT_DEVICE(879, 0x0070, 0x13eb, 32000), /* Hauppauge WinTV series */
+ BT_DEVICE(878, 0x0070, 0xff01, 44100), /* Viewcast Osprey 200 */
+ { }
+};
+MODULE_DEVICE_TABLE(pci, snd_bt87x_ids);
+
+/* cards known not to have audio
+ * (DVB cards use the audio function to transfer MPEG data) */
+static struct {
+ unsigned short subvendor, subdevice;
+} blacklist[] __devinitdata = {
+ {0x0071, 0x0101}, /* Nebula Electronics DigiTV */
+ {0x11bd, 0x0026}, /* Pinnacle PCTV SAT CI */
+ {0x1461, 0x0761}, /* AVermedia AverTV DVB-T */
+ {0x1461, 0x0771}, /* AVermedia DVB-T 771 */
+ {0x1822, 0x0001}, /* Twinhan VisionPlus DVB-T */
+ {0x18ac, 0xdb10}, /* DVICO FusionHDTV DVB-T Lite */
+ {0x270f, 0xfc00}, /* Chaintech Digitop DST-1000 DVB-S */
+};
+
+/* return the rate of the card, or a negative value if it's blacklisted */
+static int __devinit snd_bt87x_detect_card(struct pci_dev *pci)
+{
+ int i;
+ const struct pci_device_id *supported;
+
+ supported = pci_match_device(snd_bt87x_ids, pci);
+ if (supported)
+ return supported->driver_data;
+
+ for (i = 0; i < ARRAY_SIZE(blacklist); ++i)
+ if (blacklist[i].subvendor == pci->subsystem_vendor &&
+ blacklist[i].subdevice == pci->subsystem_device) {
+ snd_printdd(KERN_INFO "card %#04x:%#04x has no audio\n",
+ pci->subsystem_vendor, pci->subsystem_device);
+ return -EBUSY;
+ }
+
+ snd_printk(KERN_INFO "unknown card %#04x:%#04x, using default rate 32000\n",
+ pci->subsystem_vendor, pci->subsystem_device);
+ snd_printk(KERN_DEBUG "please mail id, board name, and, "
+ "if it works, the correct digital_rate option to "
+ "<alsa-devel@lists.sf.net>\n");
+ return 32000; /* default rate */
+}
+
static int __devinit snd_bt87x_probe(struct pci_dev *pci,
const struct pci_device_id *pci_id)
{
static int dev;
snd_card_t *card;
bt87x_t *chip;
- int err;
+ int err, rate;
+
+ rate = pci_id->driver_data;
+ if (! rate)
+ if ((rate = snd_bt87x_detect_card(pci)) <= 0)
+ return -ENODEV;
if (dev >= SNDRV_CARDS)
return -ENODEV;
if (digital_rate[dev] > 0)
chip->dig_rate = digital_rate[dev];
else
- chip->dig_rate = (int)pci_id->driver_data;
+ chip->dig_rate = rate;
err = snd_bt87x_pcm(chip, DEVICE_DIGITAL, "Bt87x Digital");
if (err < 0)
pci_set_drvdata(pci, NULL);
}
-#define BT_DEVICE(chip, subvend, subdev, rate) \
- { .vendor = PCI_VENDOR_ID_BROOKTREE, \
- .device = PCI_DEVICE_ID_BROOKTREE_##chip, \
- .subvendor = subvend, .subdevice = subdev, \
- .driver_data = rate }
-
-/* driver_data is the default digital_rate value for that device */
-static struct pci_device_id snd_bt87x_ids[] = {
- BT_DEVICE(878, 0x0070, 0xff01, 44100), /* Osprey 200 */
-
- /* default entries for 32kHz and generic Bt87x cards */
- BT_DEVICE(878, PCI_ANY_ID, PCI_ANY_ID, 32000),
- BT_DEVICE(879, PCI_ANY_ID, PCI_ANY_ID, 32000),
+/* default entries for all Bt87x cards - it's not exported */
+/* driver_data is set to 0 to call detection */
+static struct pci_device_id snd_bt87x_default_ids[] = {
+ BT_DEVICE(878, PCI_ANY_ID, PCI_ANY_ID, 0),
+ BT_DEVICE(879, PCI_ANY_ID, PCI_ANY_ID, 0),
{ }
};
-MODULE_DEVICE_TABLE(pci, snd_bt87x_ids);
static struct pci_driver driver = {
.name = "Bt87x",
static int __init alsa_card_bt87x_init(void)
{
+ if (load_all)
+ driver.id_table = snd_bt87x_default_ids;
return pci_module_init(&driver);
}