ALC262_BASIC,
ALC262_FUJITSU,
ALC262_HP_BPC,
+ ALC262_BENQ_ED8,
ALC262_AUTO,
ALC262_MODEL_LAST /* last tag */
};
ALC660_3ST,
ALC861_3ST_DIG,
ALC861_6ST_DIG,
+ ALC861_UNIWILL_M31,
ALC861_AUTO,
ALC861_MODEL_LAST,
};
enum {
ALC882_3ST_DIG,
ALC882_6ST_DIG,
+ ALC882_ARIMA,
ALC882_AUTO,
ALC882_MODEL_LAST,
};
ALC883_3ST_6ch,
ALC883_6ST_DIG,
ALC888_DEMO_BOARD,
+ ALC883_ACER,
ALC883_AUTO,
ALC883_MODEL_LAST,
};
/* channel model */
const struct hda_channel_mode *channel_mode;
int num_channel_mode;
+ int need_dac_fix;
/* PCM information */
struct hda_pcm pcm_rec[3]; /* used in alc_build_pcms() */
hda_nid_t dig_in_nid;
unsigned int num_channel_mode;
const struct hda_channel_mode *channel_mode;
+ int need_dac_fix;
unsigned int num_mux_defs;
const struct hda_input_mux *input_mux;
void (*unsol_event)(struct hda_codec *, unsigned int);
{
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
struct alc_spec *spec = codec->spec;
- return snd_hda_ch_mode_put(codec, ucontrol, spec->channel_mode,
- spec->num_channel_mode,
- &spec->multiout.max_channels);
+ int err = snd_hda_ch_mode_put(codec, ucontrol, spec->channel_mode,
+ spec->num_channel_mode,
+ &spec->multiout.max_channels);
+ if (err >= 0 && spec->need_dac_fix)
+ spec->multiout.num_dacs = spec->multiout.max_channels / 2;
+ return err;
}
/*
spec->channel_mode = preset->channel_mode;
spec->num_channel_mode = preset->num_channel_mode;
+ spec->need_dac_fix = preset->need_dac_fix;
spec->multiout.max_channels = spec->channel_mode[0].channels;
};
static struct hda_verb alc880_pin_tcl_S700_init_verbs[] = {
+ /* change to EAPD mode */
+ {0x20, AC_VERB_SET_COEF_INDEX, 0x07},
+ {0x20, AC_VERB_SET_PROC_COEF, 0x3060},
+
/* Headphone output */
{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
/* Front output*/
}
}
- /* If the use of more than one ADC is requested for the current
- * model, configure a second analog capture-only PCM.
- */
- if (spec->num_adc_nids > 1) {
- codec->num_pcms++;
- info++;
- info->name = spec->stream_name_analog;
- /* No playback stream for second PCM */
- info->stream[SNDRV_PCM_STREAM_PLAYBACK] = alc_pcm_null_playback;
- info->stream[SNDRV_PCM_STREAM_PLAYBACK].nid = 0;
- if (spec->stream_analog_capture) {
- snd_assert(spec->adc_nids, return -EINVAL);
- info->stream[SNDRV_PCM_STREAM_CAPTURE] = *(spec->stream_analog_capture);
- info->stream[SNDRV_PCM_STREAM_CAPTURE].nid = spec->adc_nids[1];
- }
- }
-
+ /* SPDIF for stream index #1 */
if (spec->multiout.dig_out_nid || spec->dig_in_nid) {
- codec->num_pcms++;
- info++;
+ codec->num_pcms = 2;
+ info = spec->pcm_rec + 1;
info->name = spec->stream_name_digital;
if (spec->multiout.dig_out_nid &&
spec->stream_digital_playback) {
}
}
+ /* If the use of more than one ADC is requested for the current
+ * model, configure a second analog capture-only PCM.
+ */
+ /* Additional Analaog capture for index #2 */
+ if (spec->num_adc_nids > 1 && spec->stream_analog_capture &&
+ spec->adc_nids) {
+ codec->num_pcms = 3;
+ info = spec->pcm_rec + 2;
+ info->name = spec->stream_name_analog;
+ /* No playback stream for second PCM */
+ info->stream[SNDRV_PCM_STREAM_PLAYBACK] = alc_pcm_null_playback;
+ info->stream[SNDRV_PCM_STREAM_PLAYBACK].nid = 0;
+ if (spec->stream_analog_capture) {
+ info->stream[SNDRV_PCM_STREAM_CAPTURE] = *(spec->stream_analog_capture);
+ info->stream[SNDRV_PCM_STREAM_CAPTURE].nid = spec->adc_nids[1];
+ }
+ }
+
return 0;
}
{ .pci_subvendor = 0x8086, .pci_subdevice = 0xe20f, .config = ALC880_3ST },
{ .pci_subvendor = 0x8086, .pci_subdevice = 0xe210, .config = ALC880_3ST },
{ .pci_subvendor = 0x8086, .pci_subdevice = 0xe211, .config = ALC880_3ST },
+ { .pci_subvendor = 0x8086, .pci_subdevice = 0xe212, .config = ALC880_3ST },
+ { .pci_subvendor = 0x8086, .pci_subdevice = 0xe213, .config = ALC880_3ST },
{ .pci_subvendor = 0x8086, .pci_subdevice = 0xe214, .config = ALC880_3ST },
+ { .pci_subvendor = 0x8086, .pci_subdevice = 0xe234, .config = ALC880_3ST },
{ .pci_subvendor = 0x8086, .pci_subdevice = 0xe302, .config = ALC880_3ST },
{ .pci_subvendor = 0x8086, .pci_subdevice = 0xe303, .config = ALC880_3ST },
{ .pci_subvendor = 0x8086, .pci_subdevice = 0xe304, .config = ALC880_3ST },
{ .pci_subvendor = 0x107b, .pci_subdevice = 0x4040, .config = ALC880_3ST },
{ .pci_subvendor = 0x107b, .pci_subdevice = 0x4041, .config = ALC880_3ST },
/* TCL S700 */
+ { .modelname = "tcl", .config = ALC880_TCL_S700 },
{ .pci_subvendor = 0x19db, .pci_subdevice = 0x4188, .config = ALC880_TCL_S700 },
/* Back 3 jack, front 2 jack (Internal add Aux-In) */
{ .modelname = "3stack-digout", .config = ALC880_3ST_DIG },
{ .pci_subvendor = 0x8086, .pci_subdevice = 0xe308, .config = ALC880_3ST_DIG },
{ .pci_subvendor = 0x1025, .pci_subdevice = 0x0070, .config = ALC880_3ST_DIG },
- /* Clevo m520G NB */
- { .pci_subvendor = 0x1558, .pci_subdevice = 0x0520, .config = ALC880_CLEVO },
+
+ /* Clevo laptops */
+ { .modelname = "clevo", .config = ALC880_CLEVO },
+ { .pci_subvendor = 0x1558, .pci_subdevice = 0x0520,
+ .config = ALC880_CLEVO }, /* Clevo m520G NB */
+ { .pci_subvendor = 0x1558, .pci_subdevice = 0x0660,
+ .config = ALC880_CLEVO }, /* Clevo m665n */
/* Back 3 jack plus 1 SPDIF out jack, front 2 jack (Internal add Aux-In)*/
{ .pci_subvendor = 0x8086, .pci_subdevice = 0xe305, .config = ALC880_3ST_DIG },
{ .pci_subvendor = 0x1043, .pci_subdevice = 0x1113, .config = ALC880_ASUS_DIG },
{ .pci_subvendor = 0x1043, .pci_subdevice = 0x1173, .config = ALC880_ASUS_DIG },
{ .pci_subvendor = 0x1043, .pci_subdevice = 0x1993, .config = ALC880_ASUS },
+ { .pci_subvendor = 0x1043, .pci_subdevice = 0x10c2, .config = ALC880_ASUS_DIG }, /* Asus W6A */
{ .pci_subvendor = 0x1043, .pci_subdevice = 0x10c3, .config = ALC880_ASUS_DIG },
{ .pci_subvendor = 0x1043, .pci_subdevice = 0x1133, .config = ALC880_ASUS },
{ .pci_subvendor = 0x1043, .pci_subdevice = 0x1123, .config = ALC880_ASUS_DIG },
{ .pci_subvendor = 0x1043, .pci_subdevice = 0x1143, .config = ALC880_ASUS },
+ { .modelname = "asus-w1v", .config = ALC880_ASUS_W1V },
{ .pci_subvendor = 0x1043, .pci_subdevice = 0x10b3, .config = ALC880_ASUS_W1V },
+ { .modelname = "asus-dig", .config = ALC880_ASUS_DIG },
{ .pci_subvendor = 0x1043, .pci_subdevice = 0x8181, .config = ALC880_ASUS_DIG }, /* ASUS P4GPL-X */
+ { .modelname = "asus-dig2", .config = ALC880_ASUS_DIG2 },
{ .pci_subvendor = 0x1558, .pci_subdevice = 0x5401, .config = ALC880_ASUS_DIG2 },
{ .modelname = "uniwill", .config = ALC880_UNIWILL_DIG },
{ .modelname = "lg-lw", .config = ALC880_LG_LW },
{ .pci_subvendor = 0x1854, .pci_subdevice = 0x0018, .config = ALC880_LG_LW },
+ { .pci_subvendor = 0x1854, .pci_subdevice = 0x0077, .config = ALC880_LG_LW },
#ifdef CONFIG_SND_DEBUG
{ .modelname = "test", .config = ALC880_TEST },
.dac_nids = alc880_dac_nids,
.num_channel_mode = ARRAY_SIZE(alc880_threestack_modes),
.channel_mode = alc880_threestack_modes,
+ .need_dac_fix = 1,
.input_mux = &alc880_capture_source,
},
[ALC880_3ST_DIG] = {
.dig_out_nid = ALC880_DIGOUT_NID,
.num_channel_mode = ARRAY_SIZE(alc880_threestack_modes),
.channel_mode = alc880_threestack_modes,
+ .need_dac_fix = 1,
.input_mux = &alc880_capture_source,
},
[ALC880_TCL_S700] = {
.dac_nids = alc880_asus_dac_nids,
.num_channel_mode = ARRAY_SIZE(alc880_asus_modes),
.channel_mode = alc880_asus_modes,
+ .need_dac_fix = 1,
.input_mux = &alc880_capture_source,
},
[ALC880_ASUS_DIG] = {
.dig_out_nid = ALC880_DIGOUT_NID,
.num_channel_mode = ARRAY_SIZE(alc880_asus_modes),
.channel_mode = alc880_asus_modes,
+ .need_dac_fix = 1,
.input_mux = &alc880_capture_source,
},
[ALC880_ASUS_DIG2] = {
.dig_out_nid = ALC880_DIGOUT_NID,
.num_channel_mode = ARRAY_SIZE(alc880_asus_modes),
.channel_mode = alc880_asus_modes,
+ .need_dac_fix = 1,
.input_mux = &alc880_capture_source,
},
[ALC880_ASUS_W1V] = {
.dig_out_nid = ALC880_DIGOUT_NID,
.num_channel_mode = ARRAY_SIZE(alc880_asus_modes),
.channel_mode = alc880_asus_modes,
+ .need_dac_fix = 1,
.input_mux = &alc880_capture_source,
},
[ALC880_UNIWILL_DIG] = {
.dig_out_nid = ALC880_DIGOUT_NID,
.num_channel_mode = ARRAY_SIZE(alc880_asus_modes),
.channel_mode = alc880_asus_modes,
+ .need_dac_fix = 1,
.input_mux = &alc880_capture_source,
},
[ALC880_CLEVO] = {
.hp_nid = 0x03,
.num_channel_mode = ARRAY_SIZE(alc880_threestack_modes),
.channel_mode = alc880_threestack_modes,
+ .need_dac_fix = 1,
.input_mux = &alc880_capture_source,
},
[ALC880_LG] = {
.dig_out_nid = ALC880_DIGOUT_NID,
.num_channel_mode = ARRAY_SIZE(alc880_lg_ch_modes),
.channel_mode = alc880_lg_ch_modes,
+ .need_dac_fix = 1,
.input_mux = &alc880_lg_capture_source,
.unsol_event = alc880_lg_unsol_event,
.init_hook = alc880_lg_automute,
pin = spec->autocfg.speaker_pins[0];
if (pin) /* connect to front */
alc880_auto_set_output_and_unmute(codec, pin, PIN_OUT, 0);
- pin = spec->autocfg.hp_pin;
+ pin = spec->autocfg.hp_pins[0];
if (pin) /* connect to front */
alc880_auto_set_output_and_unmute(codec, pin, PIN_HP, 0);
}
(err = alc880_auto_create_extra_out(spec,
spec->autocfg.speaker_pins[0],
"Speaker")) < 0 ||
- (err = alc880_auto_create_extra_out(spec, spec->autocfg.hp_pin,
+ (err = alc880_auto_create_extra_out(spec, spec->autocfg.hp_pins[0],
"Headphone")) < 0 ||
(err = alc880_auto_create_analog_input_ctls(spec, &spec->autocfg)) < 0)
return err;
return err;
}
- nid = cfg->hp_pin;
+ nid = cfg->hp_pins[0];
if (nid) {
err = alc260_add_playback_controls(spec, nid, "Headphone");
if (err < 0)
if (nid)
alc260_auto_set_output_and_unmute(codec, nid, PIN_OUT, 0);
- nid = spec->autocfg.hp_pin;
+ nid = spec->autocfg.hp_pins[0];
if (nid)
alc260_auto_set_output_and_unmute(codec, nid, PIN_OUT, 0);
}
{ .pci_subvendor = 0x152d, .pci_subdevice = 0x0729,
.config = ALC260_BASIC }, /* CTL Travel Master U553W */
{ .modelname = "hp", .config = ALC260_HP },
- { .pci_subvendor = 0x103c, .pci_subdevice = 0x3010, .config = ALC260_HP },
+ { .modelname = "hp-3013", .config = ALC260_HP_3013 },
+ { .pci_subvendor = 0x103c, .pci_subdevice = 0x3010, .config = ALC260_HP_3013 },
{ .pci_subvendor = 0x103c, .pci_subdevice = 0x3011, .config = ALC260_HP },
{ .pci_subvendor = 0x103c, .pci_subdevice = 0x3012, .config = ALC260_HP_3013 },
{ .pci_subvendor = 0x103c, .pci_subdevice = 0x3013, .config = ALC260_HP_3013 },
{ }
};
+static struct hda_verb alc882_eapd_verbs[] = {
+ /* change to EAPD mode */
+ {0x20, AC_VERB_SET_COEF_INDEX, 0x07},
+ {0x20, AC_VERB_SET_PROC_COEF, 0x3060},
+ { }
+};
+
/*
* generic initialization of ADC, input mixers and output mixers
*/
.config = ALC882_6ST_DIG }, /* Foxconn */
{ .pci_subvendor = 0x1019, .pci_subdevice = 0x6668,
.config = ALC882_6ST_DIG }, /* ECS to Intel*/
+ { .modelname = "arima", .config = ALC882_ARIMA },
+ { .pci_subvendor = 0x161f, .pci_subdevice = 0x2054,
+ .config = ALC882_ARIMA }, /* Arima W820Di1 */
{ .modelname = "auto", .config = ALC882_AUTO },
{}
};
.dig_in_nid = ALC882_DIGIN_NID,
.num_channel_mode = ARRAY_SIZE(alc882_ch_modes),
.channel_mode = alc882_ch_modes,
+ .need_dac_fix = 1,
.input_mux = &alc882_capture_source,
},
[ALC882_6ST_DIG] = {
.channel_mode = alc882_sixstack_modes,
.input_mux = &alc882_capture_source,
},
+ [ALC882_ARIMA] = {
+ .mixers = { alc882_base_mixer, alc882_chmode_mixer },
+ .init_verbs = { alc882_init_verbs, alc882_eapd_verbs },
+ .num_dacs = ARRAY_SIZE(alc882_dac_nids),
+ .dac_nids = alc882_dac_nids,
+ .num_channel_mode = ARRAY_SIZE(alc882_sixstack_modes),
+ .channel_mode = alc882_sixstack_modes,
+ .input_mux = &alc882_capture_source,
+ },
};
struct alc_spec *spec = codec->spec;
hda_nid_t pin;
- pin = spec->autocfg.hp_pin;
+ pin = spec->autocfg.hp_pins[0];
if (pin) /* connect to front */
alc882_auto_set_output_and_unmute(codec, pin, PIN_HP, 0); /* use dac 0 */
}
*/
static struct hda_board_config alc883_cfg_tbl[] = {
{ .modelname = "3stack-dig", .config = ALC883_3ST_2ch_DIG },
+ { .modelname = "3stack-6ch-dig", .config = ALC883_3ST_6ch_DIG },
+ { .pci_subvendor = 0x1019, .pci_subdevice = 0x6668,
+ .config = ALC883_3ST_6ch_DIG }, /* ECS to Intel*/
+ { .modelname = "3stack-6ch", .config = ALC883_3ST_6ch },
+ { .pci_subvendor = 0x108e, .pci_subdevice = 0x534d,
+ .config = ALC883_3ST_6ch },
+ { .pci_subvendor = 0x8086, .pci_subdevice = 0xd601,
+ .config = ALC883_3ST_6ch }, /* D102GGC */
{ .modelname = "6stack-dig", .config = ALC883_6ST_DIG },
- { .modelname = "6stack-dig-demo", .config = ALC888_DEMO_BOARD },
{ .pci_subvendor = 0x1462, .pci_subdevice = 0x6668,
.config = ALC883_6ST_DIG }, /* MSI */
+ { .pci_subvendor = 0x1462, .pci_subdevice = 0x7280,
+ .config = ALC883_6ST_DIG }, /* MSI K9A Platinum (MS-7280) */
{ .pci_subvendor = 0x105b, .pci_subdevice = 0x6668,
.config = ALC883_6ST_DIG }, /* Foxconn */
- { .pci_subvendor = 0x1019, .pci_subdevice = 0x6668,
- .config = ALC883_3ST_6ch_DIG }, /* ECS to Intel*/
- { .pci_subvendor = 0x108e, .pci_subdevice = 0x534d,
- .config = ALC883_3ST_6ch },
+ { .modelname = "6stack-dig-demo", .config = ALC888_DEMO_BOARD },
+ { .modelname = "acer", .config = ALC883_ACER },
+ { .pci_subvendor = 0x1025, .pci_subdevice = 0/*0x0102*/,
+ .config = ALC883_ACER },
+ { .pci_subvendor = 0x1025, .pci_subdevice = 0x0102,
+ .config = ALC883_ACER },
+ { .pci_subvendor = 0x1025, .pci_subdevice = 0x009f,
+ .config = ALC883_ACER },
{ .modelname = "auto", .config = ALC883_AUTO },
{}
};
.dig_in_nid = ALC883_DIGIN_NID,
.num_channel_mode = ARRAY_SIZE(alc883_3ST_6ch_modes),
.channel_mode = alc883_3ST_6ch_modes,
+ .need_dac_fix = 1,
.input_mux = &alc883_capture_source,
},
[ALC883_3ST_6ch] = {
.adc_nids = alc883_adc_nids,
.num_channel_mode = ARRAY_SIZE(alc883_3ST_6ch_modes),
.channel_mode = alc883_3ST_6ch_modes,
+ .need_dac_fix = 1,
.input_mux = &alc883_capture_source,
},
[ALC883_6ST_DIG] = {
.channel_mode = alc883_sixstack_modes,
.input_mux = &alc883_capture_source,
},
+ [ALC883_ACER] = {
+ .mixers = { alc883_base_mixer,
+ alc883_chmode_mixer },
+ /* On TravelMate laptops, GPIO 0 enables the internal speaker
+ * and the headphone jack. Turn this on and rely on the
+ * standard mute methods whenever the user wants to turn
+ * these outputs off.
+ */
+ .init_verbs = { alc883_init_verbs, alc880_gpio1_init_verbs },
+ .num_dacs = ARRAY_SIZE(alc883_dac_nids),
+ .dac_nids = alc883_dac_nids,
+ .num_adc_nids = ARRAY_SIZE(alc883_adc_nids),
+ .adc_nids = alc883_adc_nids,
+ .num_channel_mode = ARRAY_SIZE(alc883_3ST_2ch_modes),
+ .channel_mode = alc883_3ST_2ch_modes,
+ .input_mux = &alc883_capture_source,
+ },
};
struct alc_spec *spec = codec->spec;
hda_nid_t pin;
- pin = spec->autocfg.hp_pin;
+ pin = spec->autocfg.hp_pins[0];
if (pin) /* connect to front */
/* use dac 0 */
alc883_auto_set_output_and_unmute(codec, pin, PIN_HP, 0);
spec->stream_digital_playback = &alc883_pcm_digital_playback;
spec->stream_digital_capture = &alc883_pcm_digital_capture;
- spec->adc_nids = alc883_adc_nids;
- spec->num_adc_nids = ARRAY_SIZE(alc883_adc_nids);
+ if (! spec->adc_nids && spec->input_mux) {
+ spec->adc_nids = alc883_adc_nids;
+ spec->num_adc_nids = ARRAY_SIZE(alc883_adc_nids);
+ }
codec->patch_ops = alc_patch_ops;
if (board_config == ALC883_AUTO)
.info = snd_hda_mixer_amp_volume_info,
.get = snd_hda_mixer_amp_volume_get,
.put = alc262_fujitsu_master_vol_put,
+ .tlv = { .c = snd_hda_mixer_amp_tlv },
.private_value = HDA_COMPOSE_AMP_VAL(0x0c, 3, 0, HDA_OUTPUT),
},
{
{ } /* end */
};
+/* additional init verbs for Benq laptops */
+static struct hda_verb alc262_EAPD_verbs[] = {
+ {0x20, AC_VERB_SET_COEF_INDEX, 0x07},
+ {0x20, AC_VERB_SET_PROC_COEF, 0x3070},
+ {}
+};
+
/* add playback controls from the parsed DAC table */
static int alc262_auto_create_multi_out_ctls(struct alc_spec *spec, const struct auto_pin_cfg *cfg)
{
return err;
}
}
- nid = cfg->hp_pin;
+ nid = cfg->hp_pins[0];
if (nid) {
/* spec->multiout.hp_nid = 2; */
if (nid == 0x16) {
{ .modelname = "fujitsu", .config = ALC262_FUJITSU },
{ .pci_subvendor = 0x10cf, .pci_subdevice = 0x1397,
.config = ALC262_FUJITSU },
- { .pci_subvendor = 0x103c, .pci_subdevice = 0x208c,
+ { .modelname = "hp-bpc", .config = ALC262_HP_BPC },
+ { .pci_subvendor = 0x103c, .pci_subdevice = 0x280c,
.config = ALC262_HP_BPC }, /* xw4400 */
+ { .pci_subvendor = 0x103c, .pci_subdevice = 0x2801,
+ .config = ALC262_HP_BPC }, /* q965 */
{ .pci_subvendor = 0x103c, .pci_subdevice = 0x3014,
.config = ALC262_HP_BPC }, /* xw6400 */
{ .pci_subvendor = 0x103c, .pci_subdevice = 0x3015,
.config = ALC262_HP_BPC }, /* xw8400 */
{ .pci_subvendor = 0x103c, .pci_subdevice = 0x12fe,
.config = ALC262_HP_BPC }, /* xw9400 */
+ { .modelname = "benq", .config = ALC262_BENQ_ED8 },
+ { .pci_subvendor = 0x17ff, .pci_subdevice = 0x0560,
+ .config = ALC262_BENQ_ED8 },
{ .modelname = "auto", .config = ALC262_AUTO },
{}
};
.channel_mode = alc262_modes,
.input_mux = &alc262_HP_capture_source,
},
+ [ALC262_BENQ_ED8] = {
+ .mixers = { alc262_base_mixer },
+ .init_verbs = { alc262_init_verbs, alc262_EAPD_verbs },
+ .num_dacs = ARRAY_SIZE(alc262_dac_nids),
+ .dac_nids = alc262_dac_nids,
+ .hp_nid = 0x03,
+ .num_channel_mode = ARRAY_SIZE(alc262_modes),
+ .channel_mode = alc262_modes,
+ .input_mux = &alc262_capture_source,
+ },
};
static int patch_alc262(struct hda_codec *codec)
{ 2, alc861_threestack_ch2_init },
{ 6, alc861_threestack_ch6_init },
};
+/* Set mic1 as input and unmute the mixer */
+static struct hda_verb alc861_uniwill_m31_ch2_init[] = {
+ { 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
+ { 0x15, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x01 << 8)) }, /*mic*/
+ { } /* end */
+};
+/* Set mic1 as output and mute mixer */
+static struct hda_verb alc861_uniwill_m31_ch4_init[] = {
+ { 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
+ { 0x15, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8)) }, /*mic*/
+ { } /* end */
+};
+
+static struct hda_channel_mode alc861_uniwill_m31_modes[2] = {
+ { 2, alc861_uniwill_m31_ch2_init },
+ { 4, alc861_uniwill_m31_ch4_init },
+};
/* patch-ALC861 */
},
{ } /* end */
};
+static struct snd_kcontrol_new alc861_uniwill_m31_mixer[] = {
+ /* output mixer control */
+ HDA_CODEC_MUTE("Front Playback Switch", 0x03, 0x0, HDA_OUTPUT),
+ HDA_CODEC_MUTE("Surround Playback Switch", 0x06, 0x0, HDA_OUTPUT),
+ HDA_CODEC_MUTE_MONO("Center Playback Switch", 0x05, 1, 0x0, HDA_OUTPUT),
+ HDA_CODEC_MUTE_MONO("LFE Playback Switch", 0x05, 2, 0x0, HDA_OUTPUT),
+ /*HDA_CODEC_MUTE("Side Playback Switch", 0x04, 0x0, HDA_OUTPUT), */
+
+ /* Input mixer control */
+ /* HDA_CODEC_VOLUME("Input Playback Volume", 0x15, 0x0, HDA_OUTPUT),
+ HDA_CODEC_MUTE("Input Playback Switch", 0x15, 0x0, HDA_OUTPUT), */
+ HDA_CODEC_VOLUME("CD Playback Volume", 0x15, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE("CD Playback Switch", 0x15, 0x0, HDA_INPUT),
+ HDA_CODEC_VOLUME("Line Playback Volume", 0x15, 0x02, HDA_INPUT),
+ HDA_CODEC_MUTE("Line Playback Switch", 0x15, 0x02, HDA_INPUT),
+ HDA_CODEC_VOLUME("Mic Playback Volume", 0x15, 0x01, HDA_INPUT),
+ HDA_CODEC_MUTE("Mic Playback Switch", 0x15, 0x01, HDA_INPUT),
+ HDA_CODEC_MUTE("Front Mic Playback Switch", 0x10, 0x01, HDA_OUTPUT),
+ HDA_CODEC_MUTE("Headphone Playback Switch", 0x1a, 0x03, HDA_INPUT),
+
+ /* Capture mixer control */
+ HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Capture Source",
+ .count = 1,
+ .info = alc_mux_enum_info,
+ .get = alc_mux_enum_get,
+ .put = alc_mux_enum_put,
+ },
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Channel Mode",
+ .info = alc_ch_mode_info,
+ .get = alc_ch_mode_get,
+ .put = alc_ch_mode_put,
+ .private_value = ARRAY_SIZE(alc861_uniwill_m31_modes),
+ },
+ { } /* end */
+};
/*
* generic initialization of ADC, input mixers and output mixers
{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
{ }
};
+
+static struct hda_verb alc861_uniwill_m31_init_verbs[] = {
+ /*
+ * Unmute ADC0 and set the default input to mic-in
+ */
+ /* port-A for surround (rear panel) */
+ { 0x0e, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x00 },
+ /* port-B for mic-in (rear panel) with vref */
+ { 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
+ /* port-C for line-in (rear panel) */
+ { 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 },
+ /* port-D for Front */
+ { 0x0b, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
+ { 0x0b, AC_VERB_SET_CONNECT_SEL, 0x00 },
+ /* port-E for HP out (front panel) */
+ { 0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 }, // this has to be set to VREF80
+ /* route front PCM to HP */
+ { 0x0f, AC_VERB_SET_CONNECT_SEL, 0x01 },
+ /* port-F for mic-in (front panel) with vref */
+ { 0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
+ /* port-G for CLFE (rear panel) */
+ { 0x1f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x00 },
+ /* port-H for side (rear panel) */
+ { 0x20, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x00 },
+ /* CD-in */
+ { 0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 },
+ /* route front mic to ADC1*/
+ {0x08, AC_VERB_SET_CONNECT_SEL, 0x00},
+ {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ /* Unmute DAC0~3 & spdif out*/
+ {0x03, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x06, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+
+ /* Unmute Mixer 14 (mic) 1c (Line in)*/
+ {0x014, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x014, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x01c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x01c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+
+ /* Unmute Stereo Mixer 15 */
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0xb00c }, //Output 0~12 step
+
+ {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)}, // hp used DAC 3 (Front)
+ {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
+ { }
+};
+
/*
* generic initialization of ADC, input mixers and output mixers
*/
struct alc_spec *spec = codec->spec;
hda_nid_t pin;
- pin = spec->autocfg.hp_pin;
+ pin = spec->autocfg.hp_pins[0];
if (pin) /* connect to front */
alc861_auto_set_output_and_unmute(codec, pin, PIN_HP, spec->multiout.dac_nids[0]);
}
if ((err = alc861_auto_fill_dac_nids(spec, &spec->autocfg)) < 0 ||
(err = alc861_auto_create_multi_out_ctls(spec, &spec->autocfg)) < 0 ||
- (err = alc861_auto_create_hp_ctls(spec, spec->autocfg.hp_pin)) < 0 ||
+ (err = alc861_auto_create_hp_ctls(spec, spec->autocfg.hp_pins[0])) < 0 ||
(err = alc861_auto_create_analog_input_ctls(spec, &spec->autocfg)) < 0)
return err;
{ .modelname = "3stack", .config = ALC861_3ST },
{ .pci_subvendor = 0x8086, .pci_subdevice = 0xd600,
.config = ALC861_3ST },
+ { .modelname = "3stack-660", .config = ALC660_3ST },
{ .pci_subvendor = 0x1043, .pci_subdevice = 0x81e7,
.config = ALC660_3ST },
{ .modelname = "3stack-dig", .config = ALC861_3ST_DIG },
{ .modelname = "6stack-dig", .config = ALC861_6ST_DIG },
+ { .modelname = "uniwill-m31", .config = ALC861_UNIWILL_M31},
+ { .pci_subvendor = 0x1584, .pci_subdevice = 0x9072,
+ .config = ALC861_UNIWILL_M31 },
{ .modelname = "auto", .config = ALC861_AUTO },
{}
};
.dac_nids = alc861_dac_nids,
.num_channel_mode = ARRAY_SIZE(alc861_threestack_modes),
.channel_mode = alc861_threestack_modes,
+ .need_dac_fix = 1,
.num_adc_nids = ARRAY_SIZE(alc861_adc_nids),
.adc_nids = alc861_adc_nids,
.input_mux = &alc861_capture_source,
.dig_out_nid = ALC861_DIGOUT_NID,
.num_channel_mode = ARRAY_SIZE(alc861_threestack_modes),
.channel_mode = alc861_threestack_modes,
+ .need_dac_fix = 1,
.num_adc_nids = ARRAY_SIZE(alc861_adc_nids),
.adc_nids = alc861_adc_nids,
.input_mux = &alc861_capture_source,
.dac_nids = alc660_dac_nids,
.num_channel_mode = ARRAY_SIZE(alc861_threestack_modes),
.channel_mode = alc861_threestack_modes,
+ .need_dac_fix = 1,
+ .num_adc_nids = ARRAY_SIZE(alc861_adc_nids),
+ .adc_nids = alc861_adc_nids,
+ .input_mux = &alc861_capture_source,
+ },
+ [ALC861_UNIWILL_M31] = {
+ .mixers = { alc861_uniwill_m31_mixer },
+ .init_verbs = { alc861_uniwill_m31_init_verbs },
+ .num_dacs = ARRAY_SIZE(alc861_dac_nids),
+ .dac_nids = alc861_dac_nids,
+ .dig_out_nid = ALC861_DIGOUT_NID,
+ .num_channel_mode = ARRAY_SIZE(alc861_uniwill_m31_modes),
+ .channel_mode = alc861_uniwill_m31_modes,
+ .need_dac_fix = 1,
.num_adc_nids = ARRAY_SIZE(alc861_adc_nids),
.adc_nids = alc861_adc_nids,
.input_mux = &alc861_capture_source,
},
+
};
git://git.onelab.eu / linux-2.6.git / blobdiff