# Copyright (C) 2013 INRIA
#
# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
+# it under the terms of the GNU General Public License version 2 as
+# published by the Free Software Foundation;
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
"Name of the network interface (e.g. eth0, wlan0, etc)",
flags = Flags.NoWrite)
- up = Attribute("up", "Link up",
+ up = Attribute("up", "Link up", default=True,
type = Types.Bool)
pointopoint = Attribute("pointopoint", "Peer IP address",
def __init__(self, ec, guid):
super(LinuxTap, self).__init__(ec, guid)
- self._home = "tap-%s" % self.guid
- self._gre_enabled = False
- self._tunnel_mode = False
-
+ self._gre_enabled = None
+ self._vif_prefix = "tap"
+ self._vif_type = "IFF_TAP"
+ self._vif_type_flag = LinuxTap.IFF_TAP
+ self._home = "%s-%s" % (self.vif_prefix, self.guid)
+
@property
def node(self):
node = self.get_connected(LinuxNode.get_rtype())
if node: return node[0]
- raise RuntimeError, "linux::TAP/TUN devices must be connected to a linux::Node"
+ raise RuntimeError("linux::TAP/TUN devices must be connected to a linux::Node")
@property
def gre_enabled(self):
- if not self._gre_enabled:
+ if self._gre_enabled is None:
from nepi.resources.linux.gretunnel import LinuxGRETunnel
gre = self.get_connected(LinuxGRETunnel.get_rtype())
if gre: self._gre_enabled = True
return self._gre_enabled
- @property
- def tunnel_mode(self):
- if not self._tunnel_mode:
- from nepi.resources.linux.tunnel import LinuxTunnel
- tunnel = self.get_connected(LinuxTunnel.get_rtype())
- if tunnel: self._tunnel_mode = True
-
- return self._tunnel_mode
-
def upload_sources(self):
scripts = []
scripts.append(udp_connect)
+ tap_create = os.path.join(os.path.dirname(__file__), "scripts",
+ "linux-tap-create.py")
+
+ scripts.append(tap_create)
+
+ tap_delete = os.path.join(os.path.dirname(__file__), "scripts",
+ "linux-tap-delete.py")
+
+ scripts.append(tap_delete)
+
# tunnel creation python script
tunchannel = os.path.join(os.path.dirname(__file__), "scripts",
"tunchannel.py")
def upload_start_command(self):
# If GRE mode is enabled, TAP creation is delayed until the
# tunnel is established
- if not self.tunnel_mode:
+ if not self.gre_enabled:
# We want to make sure the device is up and running
# before the deploy is over, so we execute the
# start script now and wait until it finishes.
shfile = shfile,
overwrite = True)
+ def upload_start_command(self):
+ # If GRE mode is enabled, TAP creation is delayed until the
+ # tunnel is established
+ if not self.gre_enabled:
+ # Overwrite file every time.
+ # The start.sh has the path to the socket, wich should change
+ # on every experiment run.
+ command = self.get("command")
+
+ self.info("Uploading command '%s'" % command)
+
+ # replace application specific paths in the command
+ command = self.replace_paths(command)
+
+ # replace application specific paths in the environment
+ env = self.get("env")
+ env = env and self.replace_paths(env)
+
+ shfile = os.path.join(self.app_home, "start.sh")
+
+ self.node.upload_command(command,
+ shfile = shfile,
+ env = env,
+ overwrite = True)
+
+ # We want to make sure the device is up and running
+ # before the deploy finishes, so we execute now the
+ # start script. We run it in background, because the
+ # TAP will live for as long as the process that
+ # created it is running, and wait until the TAP
+ # is created.
+ self._run_in_background()
+
def do_deploy(self):
if not self.node or self.node.state < ResourceState.PROVISIONED:
self.ec.schedule(self.reschedule_delay, self.deploy)
else:
+ if self.gre_enabled:
+ self._vif_prefix = "gre"
+ self._home = "%s-%s" % (self.vif_prefix, self.guid)
+
if not self.get("deviceName"):
self.set("deviceName", "%s%d" % (self.vif_prefix, self.guid))
if not self.get("command"):
self.set("command", self._start_command)
+ if not self.get("depends"):
+ self.set("depends", self._dependencies)
+
+ if not self.get("install"):
+ self.set("install", self._install)
+
self.do_discover()
self.do_provision()
else:
msg = " Failed to execute command '%s'" % command
self.error(msg, out, err)
- raise RuntimeError, msg
+ raise RuntimeError(msg)
def do_stop(self):
command = self.get('command') or ''
tdiffsec(tnow(), self._last_state_check) > state_check_delay:
if self.get("deviceName"):
- (out, err), proc = self.node.execute("ip a")
+ (out, err), proc = self.node.execute("ifconfig")
if out.strip().find(self.get("deviceName")) == -1:
# tap is not running is not running (socket not found)
def gre_connect(self, remote_endpoint, connection_app_home,
connection_run_home):
- gre_connect_command = self._gre_connect_command(
- remote_endpoint, connection_run_home)
+ gre_connect_command = self._gre_connect_command(remote_endpoint,
+ connection_app_home, connection_run_home)
# upload command to connect.sh script
shfile = os.path.join(connection_app_home, "gre-connect.sh")
# invoke connect script
cmd = "bash %s" % shfile
- (out, err), proc = self.node.run(cmd, connection_run_home)
+ (out, err), proc = self.node.run(cmd, connection_run_home,
+ pidfile = "gre_connect_pidfile",
+ stdout = "gre_connect_stdout",
+ stderr = "gre_connect_stderr",
+ )
# check if execution errors occurred
msg = " Failed to connect endpoints "
if proc.poll() or err:
self.error(msg, out, err)
- raise RuntimeError, msg
+ raise RuntimeError(msg)
# Wait for pid file to be generated
- pid, ppid = self.node.wait_pid(connection_run_home)
+ pid, ppid = self.node.wait_pid(connection_run_home,
+ pidfile = "gre_connect_pidfile")
# If the process is not running, check for error information
# on the remote machine
if not pid or not ppid:
- (out, err), proc = self.node.check_errors(connection_run_home)
+ (out, err), proc = self.node.check_errors(connection_run_home,
+ stderr = "gre_connect_stderr")
+
# Out is what was written in the stderr file
if err:
msg = " Failed to start command '%s' " % command
self.error(msg, out, err)
- raise RuntimeError, msg
+ raise RuntimeError(msg)
return True
def udp_connect(self, remote_endpoint, connection_app_home,
connection_run_home, cipher, cipher_key, bwlimit, txqueuelen):
udp_connect_command = self._udp_connect_command(
- remote_endpoint, connection_run_home,
+ remote_endpoint, connection_app_home, connection_run_home,
cipher, cipher_key, bwlimit, txqueuelen)
# upload command to connect.sh script
- shfile = os.path.join(self.app_home, "udp-connect.sh")
+ shfile = os.path.join(connection_app_home, "udp-connect.sh")
self.node.upload_command(udp_connect_command,
shfile = shfile,
overwrite = False)
# invoke connect script
cmd = "bash %s" % shfile
- (out, err), proc = self.node.run(cmd, self.run_home)
+ (out, err), proc = self.node.run(cmd, connection_run_home,
+ pidfile = "udp_connect_pidfile",
+ stdout = "udp_connect_stdout",
+ stderr = "udp_connect_stderr",
+ )
# check if execution errors occurred
msg = "Failed to connect endpoints "
if proc.poll():
self.error(msg, out, err)
- raise RuntimeError, msg
+ raise RuntimeError(msg)
# Wait for pid file to be generated
- self._pid, self._ppid = self.node.wait_pid(self.run_home)
+ self._pid, self._ppid = self.node.wait_pid(
+ connection_run_home,
+ pidfile = "udp_connect_pidfile")
# If the process is not running, check for error information
# on the remote machine
if not self._pid or not self._ppid:
- (out, err), proc = self.node.check_errors(self.run_home)
+ (out, err), proc = self.node.check_errors(
+ connection_run_home,
+ stderr = "udp_connect_stderr")
+
# Out is what was written in the stderr file
if err:
msg = " Failed to start command '%s' " % command
self.error(msg, out, err)
- raise RuntimeError, msg
+ raise RuntimeError(msg)
- port = self.wait_local_port()
-
- return port
-
- def _udp_connect_command(self, remote_endpoint, connection_run_home,
- cipher, cipher_key, bwlimit, txqueuelen):
-
- # Set the remote endpoint to the IP of the device
- self.set("pointopoint", remote_endpoint.get("ip"))
-
- # Planetlab TAPs always use PI headers
- from nepi.resources.planetlab.tap import PlanetlabTap
- if self.is_rm_instance(PlanetlabTap.get_rtype()):
- self.set("pi", True)
-
- # Public IP of the remote NODE to stablish tunnel
- remote_ip = remote_endpoint.node.get("ip")
-
- local_port_file = os.path.join(self.run_home,
- "local_port")
-
- remote_port_file = os.path.join(self.run_home,
- "remote_port")
-
- ret_file = os.path.join(self.run_home,
- "ret_file")
-
- # Generate UDP connect command
- # Use the start command to configure TAP with peer info
- start_command = self._start_command
-
- command = ["( "]
- command.append(start_command)
-
- # Use pl-vid-udp-connect.py to stablish the tunnel between endpoints
- command.append(") & (")
- command.append("sudo -S")
- command.append("PYTHONPATH=$PYTHONPATH:${SRC}")
- command.append("python ${SRC}/linux-udp-connect.py")
- command.append("-N %s" % self.get("deviceName"))
- command.append("-t %s" % self.vif_type)
- if self.get("pi"):
- command.append("-p")
- command.append("-l %s " % local_port_file)
- command.append("-r %s " % remote_port_file)
- command.append("-H %s " % remote_ip)
- command.append("-R %s " % ret_file)
- if cipher:
- command.append("-c %s " % cipher)
- if cipher_key:
- command.append("-k %s " % cipher_key)
- if txqueuelen:
- command.append("-q %s " % txqueuelen)
- if bwlimit:
- command.append("-b %s " % bwlimit)
-
- command.append(")")
-
- command = " ".join(command)
- command = self.replace_paths(command)
-
- return command
-
- def _gre_connect_command(self, remote_endpoint, connection_run_home):
- # Set the remote endpoint to (private) device IP
- self.set("pointopoint", remote_endpoint.get("ip"))
- ## public node IP
- self.set("greRemote", remote_endpoint.node.get("ip"))
-
- # Generate GRE connect command
- command = ["("]
- command.append(self._stop_command)
- command.append(") ; (")
- command.append(self._start_gre_command)
- command.append(")")
-
- command = " ".join(command)
- command = self.replace_paths(command)
-
- return command
+ return self.wait_file(connection_run_home, "local_port")
def establish_udp_connection(self, remote_endpoint,
- connection_app_home,
- connection_run_home,
- port):
+ connection_app_home, connection_run_home, port):
# upload remote port number to file
rem_port = "%s\n" % port
self.node.upload(rem_port,
- os.path.join(self.run_home, "remote_port"),
+ os.path.join(connection_run_home, "remote_port"),
text = True,
overwrite = False)
- def verify_connection(self):
- self.wait_result()
+ def verify_connection(self, remote_endpoint,
+ connection_app_home, connection_run_home):
- def terminate_connection(self):
+ return self.wait_file(connection_run_home, "ret_file")
+
+ def terminate_connection(self, remote_endpoint,
+ connection_app_home, connection_run_home):
if self._pid and self._ppid:
(out, err), proc = self.node.kill(self._pid, self._ppid,
sudo = True)
if proc.poll() and err:
msg = " Failed to Kill the Tap"
self.error(msg, out, err)
- raise RuntimeError, msg
+ raise RuntimeError(msg)
def check_status(self):
return self.node.status(self._pid, self._ppid)
- def wait_local_port(self):
- """ Waits until the local_port file for the endpoint is generated,
- and returns the port number
-
- """
- return self.wait_file("local_port")
-
- def wait_result(self):
- """ Waits until the return code file for the endpoint is generated
-
- """
- return self.wait_file("ret_file")
-
- def wait_file(self, filename):
+ def wait_file(self, home, filename):
""" Waits until file on endpoint is generated """
result = None
delay = 1.0
for i in xrange(20):
- (out, err), proc = self.node.check_output(
- self.run_home, filename)
+ (out, err), proc = self.node.check_output(home, filename)
if out:
result = out.strip()
break
else:
msg = "Couldn't retrieve %s" % filename
self.error(msg, out, err)
- raise RuntimeError, msg
+ raise RuntimeError(msg)
return result
@property
def _start_command(self):
- command = []
- if not self.gre_enabled:
- # Make sure to clean TAP if it existed
- stop_command = self._stop_command
-
- start_command = []
- start_command.append("sudo -S ip tuntap add %s mode %s %s" % (
- self.get("deviceName"),
- self.vif_prefix,
- "pi" if self.get("pi") else ""))
- start_command.append("sudo -S ip link set %s up" % self.get("deviceName"))
- start_command.append("sudo -S ip addr add %s/%s dev %s" % (
- self.get("ip"),
- self.get("prefix"),
- self.get("deviceName"),
- ))
-
- start_command = ";".join(start_command)
-
- command.append("(")
- command.append(stop_command)
- command.append(") ; (")
- command.append(start_command)
- command.append(")")
+ if self.gre_enabled:
+ command = []
+ else:
+ command = ["sudo -S "]
+ command.append("PYTHONPATH=$PYTHONPATH:${SRC}")
+ command.append("python ${SRC}/linux-tap-create.py")
+ command.append("-t %s" % self.vif_type)
+ command.append("-a %s" % self.get("ip"))
+ command.append("-n %s" % self.get("prefix"))
+ command.append("-N %s " % self.get("deviceName"))
+ command.append("-S %s " % self.sock_name)
+ if self.get("pi"):
+ command.append("-p")
return " ".join(command)
@property
def _stop_command(self):
- command = []
- command.append("sudo -S ip link set %s down" % self.get("deviceName"))
- command.append("sudo -S ip link del %s" % self.get("deviceName"))
-
- return ";".join(command)
+ if self.gre_enabled:
+ command = self._stop_gre_command
+ else:
+ command = ["sudo -S "]
+ command.append("PYTHONPATH=$PYTHONPATH:${SRC}")
+ command.append("python ${SRC}/linux-tap-delete.py")
+ command.append("-N %s " % self.get("deviceName"))
+ command.append("-S %s " % self.sock_name)
+ command = " ".join(command)
+
+ return command
+
+ def _gre_connect_command(self, remote_endpoint,
+ connection_app_home, connecrion_app_home):
+ # Set the remote endpoint to (private) device IP
+ self.set("pointopoint", remote_endpoint.get("ip"))
+ ## public node IP
+ self.set("greRemote", remote_endpoint.node.get("ip"))
+
+ # Generate GRE connect command
+ command = ["("]
+ command.append(self._stop_gre_command)
+ command.append(") ; (")
+ command.append(self._start_gre_command)
+ command.append(")")
+
+ command = " ".join(command)
+ command = self.replace_paths(command)
+
+ return command
@property
def _start_gre_command(self):
command = []
command.append("sudo -S modprobe ip_gre")
- command.append("sudo -S ip link add %s type gre remote %s local %s ttl 64 csum key %s" % (
+ command.append("sudo -S ip tunnel add %s mode gre remote %s local %s ttl 255 csum key %s" % (
self.get("deviceName"),
self.get("greRemote"),
self.node.get("ip"),
return ";".join(command)
+ @property
+ def _stop_gre_command(self):
+ command = []
+ command.append("sudo -S modprobe -r ip_gre")
+ command.append("sudo -S ip link set down dev %s" % (
+ self.get("deviceName"),
+ ))
+ command.append("sudo -S ip link del dev %s" % (
+ self.get("deviceName"),
+ ))
+
+ return ";".join(command)
+
+ def _udp_connect_command(self, remote_endpoint,
+ connection_app_home, connection_run_home,
+ cipher, cipher_key, bwlimit, txqueuelen):
+
+ # Set the remote endpoint to the IP of the device
+ self.set("pointopoint", remote_endpoint.get("ip"))
+
+ # Public IP of the remote NODE to stablish tunnel
+ remote_ip = remote_endpoint.node.get("ip")
+ local_ip = self.node.get("ip")
+
+ local_port_file = os.path.join(connection_run_home,
+ "local_port")
+
+ remote_port_file = os.path.join(connection_run_home,
+ "remote_port")
+
+ ret_file = os.path.join(connection_run_home,
+ "ret_file")
+
+ # Generate UDP connect command
+ # Use the start command to configure TAP with peer info
+ start_command = self._start_command
+
+ command = [""]
+ # Use pl-vid-udp-connect.py to stablish the tunnel between endpoints
+ command.append("sudo -S")
+ command.append("PYTHONPATH=$PYTHONPATH:${SRC}")
+ command.append("python ${SRC}/linux-udp-connect.py")
+ command.append("-t %s" % self.vif_type)
+ command.append("-S %s " % self.sock_name)
+ command.append("-p %s " % local_port_file)
+ command.append("-P %s " % remote_port_file)
+ command.append("-o %s " % local_ip)
+ command.append("-O %s " % remote_ip)
+ command.append("-R %s " % ret_file)
+ if self.get("pi"):
+ command.append("-n")
+ if cipher:
+ command.append("-c %s " % cipher)
+ if cipher_key:
+ command.append("-k %s " % cipher_key)
+ if txqueuelen:
+ command.append("-q %s " % txqueuelen)
+ if bwlimit:
+ command.append("-b %s " % bwlimit)
+
+ command = " ".join(command)
+ command = self.replace_paths(command)
+
+ return command
+
+ @property
+ def _dependencies(self):
+ return "mercurial make gcc"
+
+ @property
+ def _install(self):
+ # Install python-vsys and python-passfd
+ install_passfd = ( " ( python -c 'import passfd' ) "
+ " || "
+ " ( "
+ " cd ${SRC} ; "
+ " hg clone http://nepi.inria.fr/code/python-passfd ; "
+ " cd python-passfd ; "
+ " make all ; "
+ " sudo -S make install "
+ " )" )
+
+ return install_passfd
+
+ def valid_connection(self, guid):
+ # TODO: Validate!
+ return True
+
@property
def vif_type(self):
- return "IFF_TAP"
+ return self._vif_type
@property
def vif_type_flag(self):
- return LinuxTap.IFF_TAP
+ return self._vif_type_flag
@property
def vif_prefix(self):
- return "tap"
+ return self._vif_prefix
+ @property
def sock_name(self):
- return os.path.join(self.run_home, "tap.sock")
+ return os.path.join(self.run_home, "%s.sock" % self.vif_prefix)
def valid_connection(self, guid):
# TODO: Validate!