import os
import time
-# TODO: - routes!!!
-# - CREATE GRE - PlanetlabGRE - it only needs to set the gre and remote
-# properties when configuring the vif_up
-
PYTHON_VSYS_VERSION = "1.0"
@clsinit_copy
class PlanetlabTap(LinuxApplication):
_rtype = "PlanetlabTap"
+ _help = "Creates a TAP device on a PlanetLab host"
+ _backend = "planetlab"
@classmethod
def _register_attributes(cls):
- ip4 = Attribute("ip4", "IPv4 Address",
- flags = Flags.ExecReadOnly)
+ endpoint_ip = Attribute("endpoint_ip", "IP of the endpoint. This is the attribute "
+ "you should use to establish a tunnel or a remote "
+ "connection between endpoint",
+ flags = Flags.Design)
mac = Attribute("mac", "MAC Address",
- flags = Flags.ExecReadOnly)
+ flags = Flags.Design)
- prefix4 = Attribute("prefix4", "IPv4 network prefix",
+ endpoint_prefix = Attribute("endpoint_prefix", "IPv4 network prefix of the endpoint",
type = Types.Integer,
- flags = Flags.ExecReadOnly)
+ flags = Flags.Design)
mtu = Attribute("mtu", "Maximum transmition unit for device",
type = Types.Integer)
devname = Attribute("deviceName",
"Name of the network interface (e.g. eth0, wlan0, etc)",
- flags = Flags.ReadOnly)
+ flags = Flags.NoWrite)
up = Attribute("up", "Link up",
type = Types.Bool)
snat = Attribute("snat", "Set SNAT=1",
type = Types.Bool,
- flags = Flags.ExecReadOnly)
+ flags = Flags.Design)
pointopoint = Attribute("pointopoint", "Peer IP address",
- flags = Flags.ExecReadOnly)
+ flags = Flags.Design)
+
+ txqueuelen = Attribute("txqueuelen", "Length of transmission queue",
+ flags = Flags.Design)
+
+ txqueuelen = Attribute("txqueuelen", "Length of transmission queue",
+ flags = Flags.Design)
+
+ gre_key = Attribute("greKey",
+ "GRE key to be used to configure GRE tunnel",
+ default = "1",
+ flags = Flags.Design)
- tear_down = Attribute("tearDown", "Bash script to be executed before " + \
- "releasing the resource",
- flags = Flags.ExecReadOnly)
+ gre_remote = Attribute("greRemote",
+ "Public IP of remote endpoint for GRE tunnel",
+ flags = Flags.Design)
- cls._register_attribute(ip4)
+ tear_down = Attribute("tearDown",
+ "Bash script to be executed before releasing the resource",
+ flags = Flags.Design)
+
+ cls._register_attribute(endpoint_ip)
cls._register_attribute(mac)
- cls._register_attribute(prefix4)
+ cls._register_attribute(endpoint_prefix)
cls._register_attribute(mtu)
cls._register_attribute(devname)
cls._register_attribute(up)
cls._register_attribute(snat)
cls._register_attribute(pointopoint)
+ cls._register_attribute(txqueuelen)
+ cls._register_attribute(gre_key)
+ cls._register_attribute(gre_remote)
cls._register_attribute(tear_down)
def __init__(self, ec, guid):
super(PlanetlabTap, self).__init__(ec, guid)
self._home = "tap-%s" % self.guid
+ self._gre_enabled = False
@property
def node(self):
- node = self.get_connected(PlanetlabNode.rtype())
+ node = self.get_connected(PlanetlabNode.get_rtype())
if node: return node[0]
- return None
+ raise RuntimeError, "TAP/TUN devices must be connected to Node"
+
+ @property
+ def gre_enabled(self):
+ if not self._gre_enabled:
+ from nepi.resources.linux.gretunnel import LinuxGRETunnel
+ gre = self.get_connected(LinuxGRETunnel.get_rtype())
+ if gre: self._gre_enabled = True
+
+ return self._gre_enabled
def upload_sources(self):
- # upload vif-creation python script
+ scripts = []
+
+ # vif-creation python script
pl_vif_create = os.path.join(os.path.dirname(__file__), "scripts",
"pl-vif-create.py")
- self.node.upload(pl_vif_create,
- os.path.join(self.node.src_dir, "pl-vif-create.py"),
- overwrite = False)
-
- # upload vif-stop python script
- pl_vif_stop = os.path.join(os.path.dirname(__file__), "scripts",
- "pl-vif-stop.py")
+ scripts.append(pl_vif_create)
+
+ # vif-up python script
+ pl_vif_up = os.path.join(os.path.dirname(__file__), "scripts",
+ "pl-vif-up.py")
+
+ scripts.append(pl_vif_up)
- self.node.upload(pl_vif_stop,
- os.path.join(self.node.src_dir, "pl-vif-stop.py"),
- overwrite = False)
+ # vif-down python script
+ pl_vif_down = os.path.join(os.path.dirname(__file__), "scripts",
+ "pl-vif-down.py")
+
+ scripts.append(pl_vif_down)
- # upload vif-connect python script
+ # udp-connect python script
pl_vif_connect = os.path.join(os.path.dirname(__file__), "scripts",
"pl-vif-udp-connect.py")
+
+ scripts.append(pl_vif_connect)
- self.node.upload(pl_vif_connect,
- os.path.join(self.node.src_dir, "pl-vif-udp-connect.py"),
- overwrite = False)
-
- # upload tun-connect python script
+ # tunnel creation python script
tunchannel = os.path.join(os.path.dirname(__file__), "..", "linux",
"scripts", "tunchannel.py")
- self.node.upload(tunchannel,
- os.path.join(self.node.src_dir, "tunchannel.py"),
+ scripts.append(tunchannel)
+
+ # Upload scripts
+ scripts = ";".join(scripts)
+
+ self.node.upload(scripts,
+ os.path.join(self.node.src_dir),
overwrite = False)
# upload stop.sh script
stop_command = self.replace_paths(self._stop_command)
- self.node.upload(stop_command,
- os.path.join(self.app_home, "stop.sh"),
- text = True,
- overwrite = False)
- def upload_start_command(self):
- super(PlanetlabTap, self).upload_start_command()
-
- # We want to make sure the device is up and running
- # before the deploy finishes (so things will be ready
- # before other stuff starts running).
- # Run the command as a bash script in background,
- # in the host ( but wait until the command has
- # finished to continue )
- self._run_in_background()
-
- # Retrive if_name
- if_name = self.wait_if_name()
- self.set("deviceName", if_name)
+ self.node.upload_command(stop_command,
+ shfile = os.path.join(self.app_home, "stop.sh"),
+ # Overwrite file every time.
+ # The stop.sh has the path to the socket, which should change
+ # on every experiment run.
+ overwrite = True)
- def deploy(self):
+ def upload_start_command(self):
+ # If GRE mode is enabled, TAP creation is delayed until the
+ # tunnel is established
+ if not self.gre_enabled:
+ # Overwrite file every time.
+ # The start.sh has the path to the socket, wich should change
+ # on every experiment run.
+ super(PlanetlabTap, self).upload_start_command(overwrite = True)
+
+ # We want to make sure the device is up and running
+ # before the deploy finishes, so we execute now the
+ # start script. We run it in background, because the
+ # TAP will live for as long as the process that
+ # created it is running, and wait until the TAP
+ # is created.
+ self._run_in_background()
+
+ # After creating the TAP, the pl-vif-create.py script
+ # will write the name of the TAP to a file. We wait until
+ # we can read the interface name from the file.
+ vif_name = self.wait_vif_name()
+ self.set("deviceName", vif_name)
+
+ def do_deploy(self):
if not self.node or self.node.state < ResourceState.PROVISIONED:
self.ec.schedule(reschedule_delay, self.deploy)
else:
if not self.get("install"):
self.set("install", self._install)
- try:
- self.discover()
- self.provision()
- except:
- self.fail()
- raise
-
- self.debug("----- READY ---- ")
+ self.do_discover()
+ self.do_provision()
+
self.set_ready()
- def start(self):
+ def do_start(self):
if self.state == ResourceState.READY:
command = self.get("command")
self.info("Starting command '%s'" % command)
else:
msg = " Failed to execute command '%s'" % command
self.error(msg, out, err)
- self.fail()
raise RuntimeError, msg
- def stop(self):
+ def do_stop(self):
command = self.get('command') or ''
if self.state == ResourceState.STARTED:
self.info("Stopping command '%s'" % command)
- self.info("STOOOOOOOOOOOOOOOOOOOOOOOOOOOOOPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPP")
+
command = "bash %s" % os.path.join(self.app_home, "stop.sh")
(out, err), proc = self.execute_command(command,
blocking = True)
+ if err:
+ msg = " Failed to stop command '%s' " % command
+ self.error(msg, out, err)
+
self.set_stopped()
@property
def state(self):
- # First check if the ccnd has failed
state_check_delay = 0.5
if self._state == ResourceState.STARTED and \
tdiffsec(tnow(), self._last_state_check) > state_check_delay:
if out.strip().find(self.get("deviceName")) == -1:
# tap is not running is not running (socket not found)
- print "HEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY"
- self._finish_time = tnow()
- self._state = ResourceState.FINISHED
+ self.set_stopped()
self._last_state_check = tnow()
return self._state
- def release(self):
+ def do_release(self):
# Node needs to wait until all associated RMs are released
# to be released
- from nepi.resources.linux.udptunnel import UdpTunnel
- rms = self.get_connected(UdpTunnel.rtype())
+ from nepi.resources.linux.tunnel import LinuxTunnel
+ rms = self.get_connected(LinuxTunnel.get_rtype())
+
for rm in rms:
if rm.state < ResourceState.STOPPED:
self.ec.schedule(reschedule_delay, self.release)
return
- super(PlanetlabTap, self).release()
+ super(PlanetlabTap, self).do_release()
+
+ def wait_vif_name(self, exec_run_home = None):
+ """ Waits until the vif_name file for the command is generated,
+ and returns the vif_name for the device """
+ vif_name = None
+ delay = 0.5
- def wait_if_name(self):
- """ Waits until the if_name file for the command is generated,
- and returns the if_name for the device """
- if_name = None
- delay = 1.0
+ # The vif_name file will be created in the tap-home, while the
+ # current execution home might be elsewhere to check for errors
+ # (e.g. could be a tunnel-home)
+ if not exec_run_home:
+ exec_run_home = self.run_home
- for i in xrange(4):
- (out, err), proc = self.node.check_output(self.run_home, "if_name")
+ for i in xrange(20):
+ (out, err), proc = self.node.check_output(self.run_home, "vif_name")
+
+ if proc.poll() > 0:
+ (out, err), proc = self.node.check_errors(exec_run_home)
+
+ if err.strip():
+ raise RuntimeError, err
if out:
- if_name = out.strip()
+ vif_name = out.strip()
break
else:
time.sleep(delay)
delay = delay * 1.5
else:
- msg = "Couldn't retrieve if_name"
+ msg = "Couldn't retrieve vif_name"
self.error(msg, out, err)
- self.fail()
raise RuntimeError, msg
- return if_name
+ return vif_name
- def udp_connect_command(self, remote_ip, local_port_file,
- remote_port_file, ret_file, cipher, cipher_key,
- bwlimit, txqueuelen):
- command = ["sudo -S "]
+ def gre_connect(self, remote_endpoint, connection_app_home,
+ connection_run_home):
+ gre_connect_command = self._gre_connect_command(
+ remote_endpoint, connection_run_home)
+
+ # upload command to connect.sh script
+ shfile = os.path.join(connection_app_home, "gre-connect.sh")
+ self.node.upload_command(gre_connect_command,
+ shfile = shfile,
+ overwrite = False)
+
+ # invoke connect script
+ cmd = "bash %s" % shfile
+ (out, err), proc = self.node.run(cmd, connection_run_home)
+
+ # check if execution errors occurred
+ msg = " Failed to connect endpoints "
+
+ if proc.poll() or err:
+ self.error(msg, out, err)
+ raise RuntimeError, msg
+
+ # Wait for pid file to be generated
+ pid, ppid = self.node.wait_pid(connection_run_home)
+
+ # If the process is not running, check for error information
+ # on the remote machine
+ if not pid or not ppid:
+ (out, err), proc = self.node.check_errors(connection_run_home)
+ # Out is what was written in the stderr file
+ if err:
+ msg = " Failed to start command '%s' " % command
+ self.error(msg, out, err)
+ raise RuntimeError, msg
+
+ # After creating the TAP, the pl-vif-create.py script
+ # will write the name of the TAP to a file. We wait until
+ # we can read the interface name from the file.
+ vif_name = self.wait_vif_name(exec_run_home = connection_run_home)
+ self.set("deviceName", vif_name)
+
+ return True
+
+ def udp_connect(self, remote_endpoint, connection_app_home,
+ connection_run_home, cipher, cipher_key, bwlimit, txqueuelen):
+ udp_connect_command = self._udp_connect_command(
+ remote_endpoint, connection_run_home,
+ cipher, cipher_key, bwlimit, txqueuelen)
+
+ # upload command to connect.sh script
+ shfile = os.path.join(connection_app_home, "udp-connect.sh")
+ self.node.upload_command(udp_connect_command,
+ shfile = shfile,
+ overwrite = False)
+
+ # invoke connect script
+ cmd = "bash %s" % shfile
+ (out, err), proc = self.node.run(cmd, connection_run_home)
+
+ # check if execution errors occurred
+ msg = "Failed to connect endpoints "
+
+ if proc.poll():
+ self.error(msg, out, err)
+ raise RuntimeError, msg
+
+ # Wait for pid file to be generated
+ pid, ppid = self.node.wait_pid(connection_run_home)
+
+ # If the process is not running, check for error information
+ # on the remote machine
+ if not pid or not ppid:
+ (out, err), proc = self.node.check_errors(connection_run_home)
+ # Out is what was written in the stderr file
+ if err:
+ msg = " Failed to start command '%s' " % command
+ self.error(msg, out, err)
+ raise RuntimeError, msg
+
+ return pid, ppid
+
+ def _udp_connect_command(self, remote_endpoint, connection_run_home,
+ cipher, cipher_key, bwlimit, txqueuelen):
+
+ # Set the remote endpoint
+ self.set("pointopoint", remote_endpoint.get("endpoint_ip"))
+
+ remote_ip = remote_endpoint.node.get("ip")
+
+ local_port_file = os.path.join(connection_run_home,
+ "local_port")
+
+ remote_port_file = os.path.join(connection_run_home,
+ "remote_port")
+
+ ret_file = os.path.join(connection_run_home,
+ "ret_file")
+
+ # Generate UDP connect command
+ # Use pl-vif-up.py script to configure TAP with peer info
+ vif_up_command = self._vif_up_command
+
+ command = ["( "]
+ command.append(vif_up_command)
+
+ # Use pl-vid-udp-connect.py to stablish the tunnel between endpoints
+ command.append(") & (")
+ command.append("sudo -S")
command.append("PYTHONPATH=$PYTHONPATH:${SRC}")
command.append("python ${SRC}/pl-vif-udp-connect.py")
command.append("-t %s" % self.vif_type)
if bwlimit:
command.append("-b %s " % bwlimit)
+ command.append(")")
+
command = " ".join(command)
command = self.replace_paths(command)
+
+ return command
+
+ def _gre_connect_command(self, remote_endpoint, connection_run_home):
+ # Set the remote endpoint
+ self.set("pointopoint", remote_endpoint.get("endpoint_ip"))
+ self.set("greRemote", remote_endpoint.node.get("ip"))
+
+ # Generate GRE connect command
+
+ # Use vif_down command to first kill existing TAP in GRE mode
+ vif_down_command = self._vif_down_command
+
+ # Use pl-vif-up.py script to configure TAP with peer info
+ vif_up_command = self._vif_up_command
+
+ command = ["("]
+ command.append(vif_down_command)
+ command.append(") ; (")
+ command.append(vif_up_command)
+ command.append(")")
+
+ command = " ".join(command)
+ command = self.replace_paths(command)
+
return command
@property
def _start_command(self):
- command = ["sudo -S python ${SRC}/pl-vif-create.py"]
-
+ if self.gre_enabled:
+ command = []
+ else:
+ command = ["sudo -S python ${SRC}/pl-vif-create.py"]
+
+ command.append("-t %s" % self.vif_type)
+ command.append("-a %s" % self.get("endpoint_ip"))
+ command.append("-n %d" % self.get("endpoint_prefix"))
+ command.append("-f %s " % self.vif_name_file)
+ command.append("-S %s " % self.sock_name)
+
+ if self.get("snat") == True:
+ command.append("-s")
+
+ if self.get("pointopoint"):
+ command.append("-p %s" % self.get("pointopoint"))
+
+ if self.get("txqueuelen"):
+ command.append("-q %s" % self.get("txqueuelen"))
+
+ return " ".join(command)
+
+ @property
+ def _stop_command(self):
+ if self.gre_enabled:
+ command = self._vif_down_command
+ else:
+ command = ["sudo -S "]
+ command.append("PYTHONPATH=$PYTHONPATH:${SRC}")
+ command.append("python ${SRC}/pl-vif-down.py")
+ command.append("-S %s " % self.sock_name)
+ command = " ".join(command)
+
+ return command
+
+ @property
+ def _vif_up_command(self):
+ if self.gre_enabled:
+ device_name = "%s" % self.guid
+ else:
+ device_name = self.get("deviceName")
+
+ # Use pl-vif-up.py script to configure TAP
+ command = ["sudo -S "]
+ command.append("PYTHONPATH=$PYTHONPATH:${SRC}")
+ command.append("python ${SRC}/pl-vif-up.py")
+ command.append("-u %s" % self.node.get("username"))
+ command.append("-N %s" % device_name)
command.append("-t %s" % self.vif_type)
- command.append("-a %s" % self.get("ip4"))
- command.append("-n %d" % self.get("prefix4"))
- command.append("-f %s " % self.if_name_file)
- command.append("-S %s " % self.sock_name)
+ command.append("-a %s" % self.get("endpoint_ip"))
+ command.append("-n %d" % self.get("endpoint_prefix"))
+
if self.get("snat") == True:
command.append("-s")
+
if self.get("pointopoint"):
command.append("-p %s" % self.get("pointopoint"))
+
+ if self.get("txqueuelen"):
+ command.append("-q %s" % self.get("txqueuelen"))
+
+ if self.gre_enabled:
+ command.append("-g %s" % self.get("greKey"))
+ command.append("-G %s" % self.get("greRemote"))
+
+ command.append("-f %s " % self.vif_name_file)
return " ".join(command)
@property
- def _stop_command(self):
- command = ["sudo -S python ${SRC}/pl-vif-stop.py"]
+ def _vif_down_command(self):
+ if self.gre_enabled:
+ device_name = "%s" % self.guid
+ else:
+ device_name = self.get("deviceName")
+
+ command = ["sudo -S "]
+ command.append("PYTHONPATH=$PYTHONPATH:${SRC}")
+ command.append("python ${SRC}/pl-vif-down.py")
+ command.append("-N %s " % device_name)
- command.append("-S %s " % self.sock_name)
+ if self.gre_enabled:
+ command.append("-u %s" % self.node.get("username"))
+ command.append("-t %s" % self.vif_type)
+ command.append("-D")
+
return " ".join(command)
@property
return "IFF_TAP"
@property
- def if_name_file(self):
- return os.path.join(self.run_home, "if_name")
+ def vif_name_file(self):
+ return os.path.join(self.run_home, "vif_name")
@property
def sock_name(self):
git://git.onelab.eu / nepi.git / blobdiff