import glob
import utils
-from TestPlc import TestPlc
+from TestPlc import TestPlc, Ignored
from TestSite import TestSite
from TestNode import TestNode
from macros import sequences
try: (step,qualifier)=step.split('@')
except: pass
stepname=step
- for special in ['force']:
- stepname = stepname.replace(special+'_',"")
+ for special in ['force','ignore']:
+ stepname = stepname.replace('_'+special,"")
Step(stepname).print_doc()
def run (self):
help="fcdistro - as in vbuild-nightly")
parser.add_option("-e","--exclude",action="append", dest="exclude", default=[],
help="steps to exclude - can be set multiple times, or use quotes")
+ parser.add_option("-i","--ignore",action="append", dest="ignore", default=[],
+ help="steps to run but ignore - can be set multiple times, or use quotes")
parser.add_option("-a","--all",action="store_true",dest="all_steps", default=False,
help="Run all default steps")
parser.add_option("-l","--list",action="store_true",dest="list_steps", default=False,
help="Specify the set of hostnames for the boxes that host the nodes")
parser.add_option("-N","--nodes",action="append", dest="ips_vnode", default=[],
help="Specify the set of hostname/IP's to use for vnodes")
- parser.add_option ('-X', "--lxc",action='store_true',dest='plcs_use_lxc',
- help='use lxc-enabled plc boxes instead of vs-enabled ones')
parser.add_option("-s","--size",action="store",type="int",dest="size",default=1,
help="sets test size in # of plcs - default is 1")
parser.add_option("-q","--qualifier",action="store",type="int",dest="qualifier",default=None,
help="Used by plc_db_dump and plc_db_restore")
parser.add_option("-v","--verbose", action="store_true", dest="verbose", default=False,
help="Run in verbose mode")
- parser.add_option("-i","--interactive",action="store_true",dest="interactive",default=False,
+ parser.add_option("-I","--interactive",action="store_true",dest="interactive",default=False,
help="prompts before each step")
parser.add_option("-n","--dry-run", action="store_true", dest="dry_run", default=False,
help="Show environment and exits")
result.append(el)
return result
# flatten relevant options
- for optname in ['config','exclude','ips_bplc','ips_vplc','ips_bnode','ips_vnode']:
+ for optname in ['config','exclude','ignore','ips_bplc','ips_vplc','ips_bnode','ips_vnode']:
setattr(self.options,optname, flatten ( [ arg.split() for arg in getattr(self.options,optname) ] ))
if not self.options.rspec_styles:
('personality','arg-personality',"linux64",None),
('pldistro','arg-pldistro',"onelab",None),
('fcdistro','arg-fcdistro','f14',None),
- ('plcs_use_lxc','arg-plcs-use-lxc',False,None),
) :
# print 'handling',recname
path=filename
if self.options.list_steps:
self.init_steps()
self.list_steps()
- return True
+ return 'SUCCESS'
# steps
if not self.options.steps:
# rewrite '-' into '_' in step names
self.options.steps = [ step.replace('-','_') for step in self.options.steps ]
self.options.exclude = [ step.replace('-','_') for step in self.options.exclude ]
+ self.options.ignore = [ step.replace('-','_') for step in self.options.ignore ]
+
+ # technicality, decorate known steps to produce the '_ignore' version
+ TestPlc.create_ignore_steps()
# exclude
selected=[]
keep=False
break
if keep: selected.append(step)
+
+ # ignore
+ selected = [ step if step not in self.options.ignore else step+"_ignore"
+ for step in selected ]
+
self.options.steps=selected
# this is useful when propagating on host boxes, to avoid conflicts
raise
# provision on local substrate
- if self.options.plcs_use_lxc: LocalSubstrate.local_substrate.rescope (plcs_on_vs=False, plcs_on_lxc=True)
all_plc_specs = LocalSubstrate.local_substrate.provision(all_plc_specs,self.options)
# remember substrate IP address(es) for next run
ips_bplc_file.close()
ips_vplc_file=open('arg-ips-vplc','w')
for plc_spec in all_plc_specs:
- ips_vplc_file.write("%s\n"%plc_spec['PLC_API_HOST'])
+ ips_vplc_file.write("%s\n"%plc_spec['settings']['PLC_API_HOST'])
ips_vplc_file.close()
# ditto for nodes
ips_bnode_file=open('arg-ips-bnode','w')
# pass options to utils as well
utils.init_options(self.options)
- overall_result = True
+ overall_result = 'SUCCESS'
all_step_infos=[]
for step in self.options.steps:
if not TestPlc.valid_step(step):
continue
# some steps need to be done regardless of the previous ones: we force them
force=False
- if step.find("force_") == 0:
- step=step.replace("force_","")
+ if step.endswith("_force"):
+ step=step.replace("_force","")
force=True
# allow for steps to specify an index like in
# run checkslice@2
except :
utils.header("********** FAILED step %s (NOT FOUND) -- won't be run"%step)
traceback.print_exc()
- overall_result = False
+ overall_result = 'FAILURE'
if self.options.dry_run:
self.show_env(self.options,"Dry run")
skip_step=True
elif answer in ['q','b']: # quit/bye
print 'Exiting'
- return
+ return 'FAILURE'
elif answer in ['d']: # dry_run
dry_run=self.options.dry_run
self.options.dry_run=True
utils.header("********** %d RUNNING step %s%s on plc %s"%(plc_counter,stepname,force_msg,plcname))
if not cross: step_result = method(plc_obj)
else: step_result = method(plc_obj,across_plcs)
- if step_result:
+ if isinstance (step_result,Ignored):
+ step_result=step_result.result
+ if step_result:
+ msg="OK"
+ else:
+ msg="KO"
+ # do not overwrite if FAILURE
+ if overall_result=='SUCCESS':
+ overall_result='IGNORED'
+ utils.header('********** %d IGNORED (%s) step %s on %s'%(plc_counter,msg,stepname,plcname))
+ status="%s[I]"%msg
+ elif step_result:
utils.header('********** %d SUCCESSFUL step %s on %s'%(plc_counter,stepname,plcname))
status="OK"
else:
- overall_result = False
+ overall_result = 'FAILURE'
spec['failed_step'] = stepname
utils.header('********** %d FAILED Step %s on %s (discarded from further steps)'\
%(plc_counter,stepname,plcname))
status="KO"
except:
- overall_result=False
+ overall_result='FAILURE'
spec['failed_step'] = stepname
traceback.print_exc()
utils.header ('********** %d FAILED (exception) Step %s on %s (discarded from further steps)'\
return overall_result
# wrapper to run, returns a shell-compatible result
+ # retcod:
+ # 0: SUCCESS
+ # 1: FAILURE
+ # 2: SUCCESS but some ignored steps failed
+ # 3: OTHER ERROR
def main(self):
try:
success=self.run()
- if success:
- return 0
- else:
- return 1
+ if success == 'SUCCESS': return 0
+ elif success == 'IGNORED': return 2
+ else: return 1
except SystemExit:
print 'Caught SystemExit'
- raise
+ return 3
except:
traceback.print_exc()
- return 2
+ return 3
if __name__ == "__main__":
- sys.exit(TestMain().main())
+ exit_code = TestMain().main()
+ print "TestMain exit code",exit_code
+ sys.exit(exit_code)
git://git.onelab.eu / tests.git / blobdiff