import sys, os, os.path
from optparse import OptionParser
import traceback
+from time import strftime
import utils
from TestPlc import TestPlc
subversion_id = "$Id$"
- default_config = [ 'onelab' ]
+ default_config = [ 'default' ]
- default_steps = ['uninstall','install','install_rpm',
- 'configure', 'start',
- 'clear_ssh_config','store_keys', 'initscripts',
- 'sites', 'nodes', 'slices',
- 'bootcd', 'nodegroups',
- 'kill_all_qemus', 'start_nodes',
- 'standby_10', 'nodes_booted',
- 'standby_6','nodes_ssh', 'check_slices','check_initscripts',
- 'force_kill_qemus', ]
- other_steps = [ 'stop_all_vservers','fresh_install', 'stop','check_tcp',
- 'clean_sites', 'clean_nodes', 'clean_slices', 'clean_keys',
- 'list_all_qemus', 'kill_qemus', 'stop_nodes' ,
- 'db_dump' , 'db_restore',
- 'standby_1 through 20',
- ]
default_build_url = "http://svn.planet-lab.org/svn/build/trunk"
def __init__ (self):
- self.path=os.path.dirname(sys.argv[0])
+ self.path=os.path.dirname(sys.argv[0]) or "."
os.chdir(self.path)
@staticmethod
def show_env (options, message):
utils.header (message)
- utils.pprint("main options",options)
+ utils.show_options("main options",options)
@staticmethod
def optparse_list (option, opt, value, parser):
setattr(parser.values,option.dest,value.split())
def run (self):
- steps_message="Defaut steps are\n\t%s"%(" ".join(TestMain.default_steps))
- steps_message += "\nOther useful steps are\n\t %s"%(" ".join(TestMain.other_steps))
+ steps_message=20*'x'+" Defaut steps are\n"+TestPlc.printable_steps(TestPlc.default_steps)
+ steps_message += "\n"+20*'x'+" Other useful steps are\n"+TestPlc.printable_steps(TestPlc.other_steps)
usage = """usage: %%prog [options] steps
-myplc-url defaults to the last value used, as stored in arg-myplc-url,
+arch-rpms-url defaults to the last value used, as stored in arg-arch-rpms-url,
no default
build-url defaults to the last value used, as stored in arg-build-url,
or %s
config defaults to the last value used, as stored in arg-config,
or %r
-ips defaults to the last value used, as stored in arg-ips,
+node-ips and plc-ips defaults to the last value used, as stored in arg-node-ips and arg-plc-ips,
default is to use IP scanning
steps refer to a method in TestPlc or to a step_* module
===
"""%(TestMain.default_build_url,TestMain.default_config)
usage += steps_message
parser=OptionParser(usage=usage,version=self.subversion_id)
- parser.add_option("-u","--url",action="store", dest="myplc_url",
- help="myplc URL - for locating build output")
+ parser.add_option("-u","--url",action="store", dest="arch_rpms_url",
+ help="URL of the arch-dependent RPMS area - for locating what to test")
parser.add_option("-b","--build",action="store", dest="build_url",
- help="Build URL - for using vtest-init-vserver.sh in native mode")
+ help="Build URL - for locating vtest-init-vserver.sh")
parser.add_option("-c","--config",action="callback", callback=TestMain.optparse_list, dest="config",
nargs=1,type="string",
help="Config module - can be set multiple times, or use quotes")
+ parser.add_option("-x","--exclude",action="callback", callback=TestMain.optparse_list, dest="exclude",
+ nargs=1,type="string",default=[],
+ help="steps to exclude - can be set multiple times, or use quotes")
parser.add_option("-a","--all",action="store_true",dest="all_steps", default=False,
help="Run all default steps")
parser.add_option("-l","--list",action="store_true",dest="list_steps", default=False,
help="List known steps")
- parser.add_option("-s","--state",action="store",dest="dbname",default=None,
- help="Used by db_dump and db_restore")
- parser.add_option("-d","--display", action="store", dest="display", default='bellami.inria.fr:0.0',
- help="Set DISPLAY for vmplayer")
- parser.add_option("-i","--ip",action="callback", callback=TestMain.optparse_list, dest="ips",
+ parser.add_option("-N","--nodes",action="callback", callback=TestMain.optparse_list, dest="node_ips",
+ nargs=1,type="string",
+ help="Specify the set of IP addresses to use for nodes (scanning disabled)")
+ parser.add_option("-P","--plcs",action="callback", callback=TestMain.optparse_list, dest="plc_ips",
nargs=1,type="string",
- help="Specify the set of IP addresses to use in vserver mode (disable scanning)")
+ help="Specify the set of IP addresses to use for plcs (scanning disabled)")
+ parser.add_option("-1","--small",action="store_true",dest="small_test",default=False,
+ help="run a small test -- typically only one node")
+ parser.add_option("-d","--dbname",action="store",dest="dbname",default=None,
+ help="Used by db_dump and db_restore")
parser.add_option("-v","--verbose", action="store_true", dest="verbose", default=False,
help="Run in verbose mode")
+ parser.add_option("-q","--quiet", action="store_true", dest="quiet", default=False,
+ help="Run in quiet mode")
parser.add_option("-n","--dry-run", action="store_true", dest="dry_run", default=False,
help="Show environment and exits")
parser.add_option("-f","--forcenm", action="store_true", dest="forcenm", default=False,
help="Force the NM to restart in check_slices step")
+ parser.add_option("-t","--trace", action="store", dest="trace_file", default=None,
+ #default="logs/trace-@TIME@.txt",
+ help="Trace file location")
(self.options, self.args) = parser.parse_args()
if len(self.args) == 0:
if self.options.all_steps:
- self.options.steps=TestMain.default_steps
+ self.options.steps=TestPlc.default_steps
elif self.options.dry_run:
- self.options.steps=TestMain.default_steps
+ self.options.steps=TestPlc.default_steps
elif self.options.list_steps:
print steps_message
sys.exit(1)
# handle defaults and option persistence
for (recname,filename,default) in (
('build_url','arg-build-url',TestMain.default_build_url) ,
- ('ips','arg-ips',[]) ,
+ ('node_ips','arg-node-ips',[]) ,
+ ('plc_ips','arg-plc-ips',[]) ,
('config','arg-config',TestMain.default_config) ,
- ('myplc_url','arg-myplc-url',"") ,
+ ('arch_rpms_url','arg-arch-rpms-url',"") ,
) :
# print 'handling',recname
path=filename
print "Cannot determine",recname
print "Run %s --help for help"%sys.argv[0]
sys.exit(1)
- utils.header('* Using %s = %s'%(recname,getattr(self.options,recname)))
+ if not self.options.quiet:
+ utils.header('* Using %s = %s'%(recname,getattr(self.options,recname)))
# save for next run
fsave=open(path,"w")
fsave.close()
# utils.header('Saved %s into %s'%(recname,filename))
+ self.options.arch = "i386"
+ if self.options.arch_rpms_url.find("x86_64") >= 0:
+ self.options.arch="x86_64"
# steps
if not self.options.steps:
#default (all) steps
#self.options.steps=['dump','clean','install','populate']
- self.options.steps=TestMain.default_steps
+ self.options.steps=TestPlc.default_steps
+
+ # exclude
+ selected=[]
+ for step in self.options.steps:
+ keep=True
+ for exclude in self.options.exclude:
+ if utils.match(step,exclude):
+ keep=False
+ break
+ if keep: selected.append(step)
+ self.options.steps=selected
# this is useful when propagating on host boxes, to avoid conflicts
self.options.buildname = os.path.basename (os.path.abspath (self.path))
print 'Cannot load config %s -- ignored'%modulename
raise
# show config
- utils.show_test_spec("Test specifications",all_plc_specs)
- # build a TestPlc object from the result
+ if not self.options.quiet:
+ utils.show_test_spec("Test specifications",all_plc_specs)
+ # build a TestPlc object from the result, passing options
for spec in all_plc_specs:
spec['disabled'] = False
- spec['forced']= True
- all_plcs = [ (x, TestPlc(x)) for x in all_plc_specs]
- # expose to the various objects
- for (spec,obj) in all_plcs:
- obj.options=self.options
+ all_plcs = [ (x, TestPlc(x,self.options)) for x in all_plc_specs]
+
+ # pass options to utils as well
+ utils.init_options(self.options)
overall_result = True
testplc_method_dict = __import__("TestPlc").__dict__['TestPlc'].__dict__
all_step_infos=[]
for step in self.options.steps:
+ if not TestPlc.valid_step(step):
+ continue
+ force=False
+ # is it a forcedstep
+ if step.find("force_") == 0:
+ step=step.replace("force_","")
+ force=True
# try and locate a method in TestPlc
if testplc_method_dict.has_key(step):
- all_step_infos += [ (step, testplc_method_dict[step] )]
+ all_step_infos += [ (step, testplc_method_dict[step] , force)]
# otherwise search for the 'run' method in the step_<x> module
else:
modulename='step_'+step
if not names:
raise Exception,"No run* method in module %s"%modulename
names.sort()
- all_step_infos += [ ("%s.%s"%(step,name),module_dict[name]) for name in names ]
+ all_step_infos += [ ("%s.%s"%(step,name),module_dict[name],force) for name in names ]
except :
- print 'Step %s -- ignored'%(step)
+ print '********** step %s NOT FOUND -- ignored'%(step)
traceback.print_exc()
overall_result = False
if self.options.dry_run:
self.show_env(self.options,"Dry run")
- return 0
-
+
+ # init & open trace file if provided
+ if self.options.trace_file and not self.options.dry_run:
+ time=strftime("%H-%M")
+ date=strftime("%Y-%m-%d")
+ trace_file=self.options.trace_file
+ trace_file=trace_file.replace("@TIME@",time)
+ trace_file=trace_file.replace("@DATE@",date)
+ self.options.trace_file=trace_file
+ # create dir if needed
+ trace_dir=os.path.dirname(trace_file)
+ if trace_dir and not os.path.isdir(trace_dir):
+ os.makedirs(trace_dir)
+ trace=open(trace_file,"w")
+
# do all steps on all plcs
- for (stepname,method) in all_step_infos:
+ TRACE_FORMAT="TRACE: time=%(time)s plc=%(plcname)s step=%(stepname)s status=%(status)s force=%(force)s\n"
+ for (stepname,method,force) in all_step_infos:
for (spec,obj) in all_plcs:
plcname=spec['name']
- if spec['disabled']:
- utils.header("Plc %s is disabled - skipping step %s"%(plcname,stepname))
- if (stepname.find("force")==0 and spec['forced']) :
- utils.header("Plc %s is disabled but running step %s anyway"
- %(plcname,stepname))
- step_result = method(obj,self.options)
- if step_result:
- utils.header('********** SUCCESSFUL step %s on %s'%(stepname,plcname))
- else:
- overall_result = False
- spec['forced'] = False
- utils.header('********** Step %s on %s FAILED - discarding that plc from further steps'%(stepname,plcname))
- else:
+
+ # run the step
+ time=strftime("%Y-%m-%d-%H-%M")
+ if not spec['disabled'] or force:
try:
- utils.header("Running step %s on plc %s"%(stepname,plcname))
- step_result = method(obj,self.options)
+ force_msg=""
+ if force: force_msg=" (forced)"
+ utils.header("********** RUNNING step %s%s on plc %s"%(stepname,force_msg,plcname))
+ step_result = method(obj)
if step_result:
utils.header('********** SUCCESSFUL step %s on %s'%(stepname,plcname))
+ status="OK"
else:
overall_result = False
spec['disabled'] = True
- utils.header('********** Step %s on %s FAILED - discarding that plc from further steps'%(stepname,plcname))
+ utils.header('********** FAILED Step %s on %s - discarding that plc from further steps'%(stepname,plcname))
+ status="KO"
except:
overall_result=False
spec['disabled'] = True
- utils.header ('********** Step %s on plc %s FAILED (exception) - discarding this plc from further steps'%(stepname,plcname))
traceback.print_exc()
+ utils.header ('********** FAILED (exception) Step %s on plc %s - discarding this plc from further steps'%(stepname,plcname))
+ status="KO"
+
+ # do not run, just display it's skipped
+ else:
+ utils.header("********** IGNORED Plc %s is disabled - skipping step %s"%(plcname,stepname))
+ status="UNDEF"
+ if not self.options.dry_run:
+ # alwas do this on stdout
+ print TRACE_FORMAT%locals()
+ # duplicate on trace_file if provided
+ if self.options.trace_file:
+ trace.write(TRACE_FORMAT%locals())
+
+ if self.options.trace_file and not self.options.dry_run:
+ trace.close()
+
return overall_result
# wrapper to run, returns a shell-compatible result
git://git.onelab.eu / tests.git / blobdiff