actions=learn(output:OXM_OF_IN_PORT[])
actions=learn(table=1, in_port=1, load:OXM_OF_IN_PORT[]->NXM_NX_REG1[], load:0xfffffffe->OXM_OF_IN_PORT[])
]])
-AT_CHECK([ovs-ofctl parse-flows flows.txt], [0],
+AT_CHECK([ovs-ofctl -O OpenFlow12 parse-flows flows.txt], [0],
[[usable protocols: any
-chosen protocol: OpenFlow10-table_id
-OFPT_FLOW_MOD (xid=0x1): ADD actions=learn(table=1,output:OXM_OF_IN_PORT[])
-OFPT_FLOW_MOD (xid=0x2): ADD actions=learn(table=1,in_port=1,load:OXM_OF_IN_PORT[]->NXM_NX_REG1[],load:0xfffffffe->OXM_OF_IN_PORT[])
+chosen protocol: OXM-OpenFlow12
+OFPT_FLOW_MOD (OF1.2) (xid=0x1): ADD actions=learn(table=1,output:OXM_OF_IN_PORT[])
+OFPT_FLOW_MOD (OF1.2) (xid=0x2): ADD actions=learn(table=1,in_port=1,load:OXM_OF_IN_PORT[]->NXM_NX_REG1[],load:0xfffffffe->OXM_OF_IN_PORT[])
]])
AT_CLEANUP
[1], [], [stderr])
AT_CHECK([sed -e 's/.*|meta_flow|WARN|//' < stderr], [0],
[[destination field ip_dst lacks correct prerequisites
-ovs-ofctl: actions are invalid with specified match (OFPBAC_BAD_ARGUMENT)
+ovs-ofctl: actions are invalid with specified match (OFPBAC_MATCH_INCONSISTENT)
]], [[]])
AT_CHECK([[ovs-ofctl parse-flow 'actions=learn(load:NXM_OF_IP_DST[]->NXM_NX_REG1[])']],
[1], [], [stderr])
AT_CHECK([sed -e 's/.*|meta_flow|WARN|//' < stderr], [0],
[[source field ip_dst lacks correct prerequisites
-ovs-ofctl: actions are invalid with specified match (OFPBAC_BAD_ARGUMENT)
+ovs-ofctl: actions are invalid with specified match (OFPBAC_MATCH_INCONSISTENT)
]])
AT_CLEANUP
OVS_VSWITCHD_START
ADD_OF_PORTS([br0], 1, 2, 3)
+ovs-appctl time/stop
# Set up flow table for TCPv4 port learning.
AT_CHECK([[ovs-ofctl add-flow br0 'actions=load:3->NXM_NX_REG0[0..15],learn(table=0,priority=65535,NXM_OF_ETH_SRC[],NXM_OF_VLAN_TCI[0..11],output:NXM_NX_REG0[0..15]),output:2']])
# Trace some packets arriving. The particular packets don't matter.
for i in 1 2 3 4 5 6 7 8 9 10; do
ovs-appctl netdev-dummy/receive p1 'in_port(1),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=6,tos=0,ttl=64,frag=no),tcp(src=8,dst=9)'
+ ovs-appctl time/warp 10
+ if [[ $i -eq 1 ]]; then
+ sleep 1
+ fi
done
# Check for the learning entry.
+ovs-appctl time/warp 1000
AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0],
[[ n_packets=1, n_bytes=60, actions=load:0x3->NXM_NX_REG0[0..15],learn(table=0,priority=65535,NXM_OF_ETH_SRC[],NXM_OF_VLAN_TCI[0..11],output:NXM_NX_REG0[0..15]),output:2
- priority=65535,vlan_tci=0x0000/0x0fff,dl_src=50:54:00:00:00:05 actions=output:3
+ n_packets=9, n_bytes=540, priority=65535,vlan_tci=0x0000/0x0fff,dl_src=50:54:00:00:00:05 actions=output:3
NXST_FLOW reply:
]])
port 3: rx pkts=0, bytes=0, drop=0, errs=0, frame=0, over=0, crc=0
tx pkts=9, bytes=540, drop=0, errs=0, coll=0
])
+
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+# This test is much like the previous, but adds idle timeouts and sends
+# two different flows to the bridge. This tests that the statistics are
+# attributed correctly.
+AT_SETUP([learning action - self-modifying flow with idle_timeout])
+OVS_VSWITCHD_START
+ADD_OF_PORTS([br0], 1, 2, 3)
+
+ovs-appctl time/stop
+# Set up flow table for TCPv4 port learning.
+AT_CHECK([[ovs-ofctl add-flow br0 'actions=load:3->NXM_NX_REG0[0..15],learn(table=0,idle_timeout=5,priority=65535,NXM_OF_ETH_SRC[],NXM_OF_VLAN_TCI[0..11],output:NXM_NX_REG0[0..15]),output:2']])
+
+# Trace some packets arriving. The particular packets don't matter.
+for i in `seq 1 10`; do
+ ovs-appctl netdev-dummy/receive p1 'in_port(1),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=6,tos=0,ttl=64,frag=no),tcp(src=8,dst=9)'
+ ovs-appctl time/warp 10
+ if [[ $i -eq 1 ]]; then
+ sleep 1
+ fi
+done
+
+# Trace some packets arriving. This is is a different flow from the previous.
+# Note that we advance time by 1 second between each packet here.
+for i in `seq 1 10`; do
+ ovs-appctl netdev-dummy/receive p1 'in_port(1),eth(src=50:54:00:00:00:06,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=6,tos=0,ttl=64,frag=no),tcp(src=8,dst=9)'
+ ovs-appctl time/warp 1000
+ if [[ $i -eq 1 ]]; then
+ sleep 1
+ fi
+done
+
+# Check that the first packet of each flow went out port 2 and the rest out port 3.
+AT_CHECK(
+ [(ovs-ofctl dump-ports br0 2; ovs-ofctl dump-ports br0 3) | STRIP_XIDS], [0],
+ [OFPST_PORT reply: 1 ports
+ port 2: rx pkts=0, bytes=0, drop=0, errs=0, frame=0, over=0, crc=0
+ tx pkts=2, bytes=120, drop=0, errs=0, coll=0
+OFPST_PORT reply: 1 ports
+ port 3: rx pkts=0, bytes=0, drop=0, errs=0, frame=0, over=0, crc=0
+ tx pkts=18, bytes=1080, drop=0, errs=0, coll=0
+])
+
+# Check for the learning entry.
+ovs-appctl time/warp 1000
+AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0],
+[[ n_packets=2, n_bytes=120, actions=load:0x3->NXM_NX_REG0[0..15],learn(table=0,idle_timeout=5,priority=65535,NXM_OF_ETH_SRC[],NXM_OF_VLAN_TCI[0..11],output:NXM_NX_REG0[0..15]),output:2
+ n_packets=9, n_bytes=540, idle_timeout=5, priority=65535,vlan_tci=0x0000/0x0fff,dl_src=50:54:00:00:00:06 actions=output:3
+NXST_FLOW reply:
+]])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+# This test is much like the previous, but adds idle timeouts and sends
+# two different flows to the bridge. This tests that the statistics are
+# attributed correctly.
+AT_SETUP([learning action - self-modifying flow with hard_timeout])
+OVS_VSWITCHD_START
+ADD_OF_PORTS([br0], 1, 2, 3)
+
+ovs-appctl time/stop
+# Set up flow table for TCPv4 port learning.
+AT_CHECK([[ovs-ofctl add-flow br0 'actions=load:3->NXM_NX_REG0[0..15],learn(table=0,hard_timeout=5,priority=65535,NXM_OF_ETH_SRC[],NXM_OF_VLAN_TCI[0..11],output:NXM_NX_REG0[0..15]),output:2']])
+
+# Trace some packets arriving. The particular packets don't matter.
+for i in `seq 1 10`; do
+ ovs-appctl netdev-dummy/receive p1 'in_port(1),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=6,tos=0,ttl=64,frag=no),tcp(src=8,dst=9)'
+ ovs-appctl time/warp 10
+ if [[ $i -eq 1 ]]; then
+ sleep 1
+ fi
+done
+
+# Trace some packets arriving. This is is a different flow from the previous.
+# Note that we advance time by 1 second between each packet here.
+for i in `seq 1 10`; do
+ ovs-appctl netdev-dummy/receive p1 'in_port(1),eth(src=50:54:00:00:00:06,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=6,tos=0,ttl=64,frag=no),tcp(src=8,dst=9)'
+ ovs-appctl time/warp 1000
+ if [[ $i -eq 1 ]]; then
+ sleep 1
+ fi
+done
+
+# Check that the first packet of each flow went out port 2 and the rest out port 3.
+AT_CHECK(
+ [(ovs-ofctl dump-ports br0 2; ovs-ofctl dump-ports br0 3) | STRIP_XIDS], [0],
+ [OFPST_PORT reply: 1 ports
+ port 2: rx pkts=0, bytes=0, drop=0, errs=0, frame=0, over=0, crc=0
+ tx pkts=3, bytes=180, drop=0, errs=0, coll=0
+OFPST_PORT reply: 1 ports
+ port 3: rx pkts=0, bytes=0, drop=0, errs=0, frame=0, over=0, crc=0
+ tx pkts=17, bytes=1020, drop=0, errs=0, coll=0
+])
+
+# Check for the learning entry.
+ovs-appctl time/warp 1000
+AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0],
+[[ n_packets=3, n_bytes=180, actions=load:0x3->NXM_NX_REG0[0..15],learn(table=0,hard_timeout=5,priority=65535,NXM_OF_ETH_SRC[],NXM_OF_VLAN_TCI[0..11],output:NXM_NX_REG0[0..15]),output:2
+ n_packets=3, n_bytes=180, hard_timeout=5, priority=65535,vlan_tci=0x0000/0x0fff,dl_src=50:54:00:00:00:06 actions=output:3
+NXST_FLOW reply:
+]])
OVS_VSWITCHD_STOP
AT_CLEANUP
git://git.onelab.eu / sliver-openvswitch.git / blobdiff