Separate OpenFlow port numbers from datapath ones.

[sliver-openvswitch.git] / tests / learn.at

diff --git a/tests/learn.at b/tests/learn.at
index 9304861..b2bec02 100644 (file)
--- a/tests/learn.at
+++ b/tests/learn.at
@@ -10,7 +10,7 @@ AT_CHECK([ovs-ofctl parse-flows flows.txt], [0],
 [[usable protocols: any
 chosen protocol: OpenFlow10-table_id
 OFPT_FLOW_MOD (xid=0x1): ADD actions=learn(table=1)
-OFPT_FLOW_MOD (xid=0x2): ADD actions=learn(table=1,NXM_OF_VLAN_TCI[0..11],NXM_OF_ETH_DST[]=NXM_OF_ETH_SRC[],output:NXM_OF_IN_PORT[],load:0x000a->NXM_NX_REG0[5..10])
+OFPT_FLOW_MOD (xid=0x2): ADD actions=learn(table=1,NXM_OF_VLAN_TCI[0..11],NXM_OF_ETH_DST[]=NXM_OF_ETH_SRC[],output:NXM_OF_IN_PORT[],load:0xa->NXM_NX_REG0[5..10])
 OFPT_FLOW_MOD (xid=0x3): ADD actions=learn(table=1,idle_timeout=10,hard_timeout=20,fin_idle_timeout=5,fin_hard_timeout=10,priority=10,cookie=0xfedcba9876543210,in_port=99,NXM_OF_ETH_DST[]=NXM_OF_ETH_SRC[],load:NXM_OF_IN_PORT[]->NXM_NX_REG1[16..31])
 ]])
 AT_CLEANUP
@@ -42,7 +42,7 @@ ip,actions=learn(eth_type=0x800,OXM_OF_IPV4_DST[])
 AT_CHECK([ovs-ofctl parse-flows flows.txt], [0],
 [[usable protocols: any
 chosen protocol: OpenFlow10-table_id
-OFPT_FLOW_MOD (xid=0x1): ADD actions=learn(table=1,eth_type=0x800,load:0x00000005->NXM_OF_IP_DST[])
+OFPT_FLOW_MOD (xid=0x1): ADD actions=learn(table=1,eth_type=0x800,load:0x5->NXM_OF_IP_DST[])
 OFPT_FLOW_MOD (xid=0x2): ADD ip actions=learn(table=1,load:NXM_OF_IP_DST[]->NXM_NX_REG1[])
 OFPT_FLOW_MOD (xid=0x3): ADD ip actions=learn(table=1,eth_type=0x800,NXM_OF_IP_DST[])
 ]])
@@ -161,7 +161,8 @@ AT_SETUP([learning action - fin_timeout feature])
 # This is a totally artificial use of the "learn" action.  The only purpose
 # is to check that specifying fin_idle_timeout or fin_hard_timeout causes
 # a corresponding fin_timeout action to end up in the learned flows.
-OVS_VSWITCHD_START
+OVS_VSWITCHD_START(
+    [add-port br0 p1 -- set Interface p1 type=dummy ofport_request=1])
 AT_CHECK([[ovs-ofctl add-flow br0 'actions=learn(fin_hard_timeout=10, fin_idle_timeout=5, NXM_OF_ETH_DST[]=NXM_OF_ETH_SRC[], output:NXM_OF_IN_PORT[])']])
 AT_CHECK([ovs-appctl ofproto/trace br0 'in_port(1),eth(src=50:54:00:00:00:05,dst=ff:ff:ff:ff:ff:ff),eth_type(0x0806),arp(sip=192.168.0.1,tip=192.168.0.2,op=1,sha=50:54:00:00:00:05,tha=00:00:00:00:00:00)' -generate], [0], [ignore])
 AT_CHECK([ovs-ofctl dump-flows br0 table=1 | ofctl_strip], [0],