update sliver-ovs to new ovsdb syntax

[sliver-openvswitch.git] / tests / learn.at

diff --git a/tests/learn.at b/tests/learn.at
index 5eb3e5d..ec1c347 100644 (file)
--- a/tests/learn.at
+++ b/tests/learn.at
@@ -15,6 +15,28 @@ OFPT_FLOW_MOD (xid=0x3): ADD actions=learn(table=1,idle_timeout=10,hard_timeout=
 ]])
 AT_CLEANUP
 
+AT_SETUP([learning action - parsing and formatting - illegal in_port_oxm])
+AT_CHECK([[ovs-ofctl parse-flow 'actions=learn(table=1, in_port_oxm=123456)']],
+  [1], [], [stderr])
+AT_CHECK([sed -e 's/.*|ofp_util|WARN|//' < stderr], [0],
+  [[port 123456 is outside the supported range 0 through ffff or 0xffffff00 through 0xffffffff
+ovs-ofctl: 123456: port value out of range for in_port_oxm
+]], [[]])
+AT_CLEANUP
+
+AT_SETUP([learning action - parsing and formatting - OXM])
+AT_DATA([flows.txt], [[
+actions=learn(output:OXM_OF_IN_PORT[])
+actions=learn(table=1, in_port=1, load:OXM_OF_IN_PORT[]->NXM_NX_REG1[], load:0xfffffffe->OXM_OF_IN_PORT[])
+]])
+AT_CHECK([ovs-ofctl parse-flows flows.txt], [0],
+[[usable protocols: any
+chosen protocol: OpenFlow10-table_id
+OFPT_FLOW_MOD (xid=0x1): ADD actions=learn(table=1,output:OXM_OF_IN_PORT[])
+OFPT_FLOW_MOD (xid=0x2): ADD actions=learn(table=1,in_port=1,load:OXM_OF_IN_PORT[]->NXM_NX_REG1[],load:0xfffffffe->OXM_OF_IN_PORT[])
+]])
+AT_CLEANUP
+
 AT_SETUP([learning action - examples])
 AT_DATA([flows.txt], [[
 # These are the examples from nicira-ext.h.
@@ -75,7 +97,7 @@ AT_CHECK([ovs-ofctl add-flows br0 flows.txt])
 
 # Trace an ARP packet arriving on port 3, to create a MAC learning entry.
 flow="in_port(3),eth(src=50:54:00:00:00:05,dst=ff:ff:ff:ff:ff:ff),eth_type(0x0806),arp(sip=192.168.0.1,tip=192.168.0.2,op=1,sha=50:54:00:00:00:05,tha=00:00:00:00:00:00)"
-AT_CHECK([ovs-appctl ofproto/trace br0 "$flow" -generate], [0], [stdout])
+AT_CHECK([ovs-appctl ofproto/trace ovs-dummy "$flow" -generate], [0], [stdout])
 actual=`tail -1 stdout | sed 's/Datapath actions: //'`
 
 expected="1,2,100"
@@ -92,7 +114,7 @@ NXST_FLOW reply:
 
 # Trace a packet arrival destined for the learned MAC.
 # (This will also learn a MAC.)
-AT_CHECK([ovs-appctl ofproto/trace br0 'in_port(1),eth(src=50:54:00:00:00:06,dst=50:54:00:00:00:05),eth_type(0x0806),arp(sip=192.168.0.2,tip=192.168.0.1,op=2,sha=50:54:00:00:00:06,tha=50:54:00:00:00:05)' -generate], [0], [stdout])
+AT_CHECK([ovs-appctl ofproto/trace ovs-dummy 'in_port(1),eth(src=50:54:00:00:00:06,dst=50:54:00:00:00:05),eth_type(0x0806),arp(sip=192.168.0.2,tip=192.168.0.1,op=2,sha=50:54:00:00:00:06,tha=50:54:00:00:00:05)' -generate], [0], [stdout])
 AT_CHECK([tail -1 stdout], [0], [Datapath actions: 3
 ])
 
@@ -106,7 +128,7 @@ NXST_FLOW reply:
 
 # Trace a packet arrival that updates the first learned MAC entry.
 flow="in_port(2),eth(src=50:54:00:00:00:05,dst=ff:ff:ff:ff:ff:ff),eth_type(0x0806),arp(sip=192.168.0.1,tip=192.168.0.2,op=1,sha=50:54:00:00:00:05,tha=00:00:00:00:00:00)"
-AT_CHECK([ovs-appctl ofproto/trace br0 "$flow" -generate], [0], [stdout])
+AT_CHECK([ovs-appctl ofproto/trace ovs-dummy "$flow" -generate], [0], [stdout])
 actual=`tail -1 stdout | sed 's/Datapath actions: //'`
 
 expected="1,3,100"
@@ -147,7 +169,7 @@ AT_CHECK([ovs-ofctl add-flows br0 flows.txt])
 
 # Trace an ICMP packet arriving on port 3, to create a MAC learning entry.
 flow="in_port(3),eth(src=50:54:00:00:00:07,dst=50:54:00:00:00:05),eth_type(0x0800),ipv4(src=192.168.0.2,dst=192.168.0.1,proto=1,tos=0,ttl=64,frag=no),icmp(type=0,code=0)"
-AT_CHECK([ovs-appctl ofproto/trace br0 "$flow" -generate], [0], [stdout])
+AT_CHECK([ovs-appctl ofproto/trace ovs-dummy "$flow" -generate], [0], [stdout])
 actual=`tail -1 stdout | sed 's/Datapath actions: //'`
 
 expected="1,2,100"
@@ -166,7 +188,7 @@ NXST_FLOW reply:
 # disappear as long as we refresh it every second.
 for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25; do
     ovs-appctl time/warp 1000
-    AT_CHECK([ovs-appctl ofproto/trace br0 "$flow" -generate], [0], [stdout])
+    AT_CHECK([ovs-appctl ofproto/trace ovs-dummy "$flow" -generate], [0], [stdout])
 
     # Check that the entry is there.
     AT_CHECK([ovs-ofctl dump-flows br0 table=1], [0], [stdout])
@@ -209,7 +231,7 @@ AT_CHECK([[ovs-ofctl add-flow br0 'table=0 tcp actions=learn(table=1, hard_timeo
 
 # Trace a TCPv4 packet arriving on port 3.
 flow="in_port(3),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:06),eth_type(0x0800),ipv4(src=192.168.0.2,dst=192.168.0.1,proto=6,tos=0,ttl=64,frag=no),tcp(src=40000,dst=80)"
-AT_CHECK([ovs-appctl ofproto/trace br0 "$flow" -generate], [0], [stdout])
+AT_CHECK([ovs-appctl ofproto/trace ovs-dummy "$flow" -generate], [0], [stdout])
 actual=`tail -1 stdout | sed 's/Datapath actions: //'`
 
 expected="1,2,100"
@@ -237,7 +259,7 @@ AT_CHECK([[ovs-ofctl add-flow br0 'table=0 tcp6 actions=learn(table=1, hard_time
 
 # Trace a TCPv6 packet arriving on port 3.
 flow="in_port(3),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:06),eth_type(0x86dd),ipv6(src=fec0::2,dst=fec0::1,label=0,proto=6,tclass=0,hlimit=255,frag=no),tcp(src=40000,dst=80)"
-AT_CHECK([ovs-appctl ofproto/trace br0 "$flow" -generate], [0], [stdout])
+AT_CHECK([ovs-appctl ofproto/trace ovs-dummy "$flow" -generate], [0], [stdout])
 actual=`tail -1 stdout | sed 's/Datapath actions: //'`
 
 expected="1,2,100"
@@ -296,7 +318,7 @@ AT_SETUP([learning action - fin_timeout feature])
 OVS_VSWITCHD_START(
     [add-port br0 p1 -- set Interface p1 type=dummy ofport_request=1])
 AT_CHECK([[ovs-ofctl add-flow br0 'actions=learn(fin_hard_timeout=10, fin_idle_timeout=5, NXM_OF_ETH_DST[]=NXM_OF_ETH_SRC[], output:NXM_OF_IN_PORT[])']])
-AT_CHECK([ovs-appctl ofproto/trace br0 'in_port(1),eth(src=50:54:00:00:00:05,dst=ff:ff:ff:ff:ff:ff),eth_type(0x0806),arp(sip=192.168.0.1,tip=192.168.0.2,op=1,sha=50:54:00:00:00:05,tha=00:00:00:00:00:00)' -generate], [0], [ignore])
+AT_CHECK([ovs-appctl ofproto/trace ovs-dummy 'in_port(1),eth(src=50:54:00:00:00:05,dst=ff:ff:ff:ff:ff:ff),eth_type(0x0806),arp(sip=192.168.0.1,tip=192.168.0.2,op=1,sha=50:54:00:00:00:05,tha=00:00:00:00:00:00)' -generate], [0], [ignore])
 AT_CHECK([ovs-ofctl dump-flows br0 table=1 | ofctl_strip], [0],
 [NXST_FLOW reply:
  table=1, dl_dst=50:54:00:00:00:05 actions=fin_timeout(idle_timeout=5,hard_timeout=10),output:1