netdev-dummy: Add support for active stream
[sliver-openvswitch.git] / tests / ofproto-dpif.at
index 7230854..23a1f14 100644 (file)
@@ -1,5 +1,51 @@
 AT_BANNER([ofproto-dpif])
 
+# Strips out uninteresting parts of flow output, as well as parts
+# that vary from one run to another (e.g., timing and bond actions).
+m4_define([STRIP_USED], [[sed '
+    s/used:[0-9]*\.[0-9]*/used:0.0/
+' | sort]])
+m4_define([STRIP_XOUT], [[sed '
+    s/used:[0-9]*\.[0-9]*/used:0.0/
+    s/actions:.*/actions: <del>/
+    s/packets:[0-9]*/packets:0/
+    s/bytes:[0-9]*/bytes:0/
+' | sort]])
+
+AT_SETUP([ofproto-dpif - dummy interface])
+# Create br0 with interfaces p1 and p7
+#    and br1 with interfaces p2 and p8
+# with p1 and p2 connected via unix domain socket
+OVS_VSWITCHD_START(
+  [add-port br0 p1 -- set interface p1 type=dummy options:pstream=punix:$OVS_RUNDIR/p0.sock ofport_request=1 -- \
+   add-port br0 p7 -- set interface p7 ofport_request=7 type=dummy -- \
+   add-br br1 -- \
+   set bridge br1 other-config:hwaddr=aa:66:aa:66:00:00 -- \
+   set bridge br1 datapath-type=dummy other-config:datapath-id=1234 \
+                  fail-mode=secure -- \
+   add-port br1 p2 -- set interface p2 type=dummy options:stream=unix:$OVS_RUNDIR/p0.sock ofport_request=2 -- \
+   add-port br1 p8 -- set interface p8 ofport_request=8 type=dummy --])
+
+AT_CHECK([ovs-ofctl add-flow br0 action=normal])
+AT_CHECK([ovs-ofctl add-flow br1 action=normal])
+ovs-appctl time/stop
+ovs-appctl time/warp 5000
+AT_CHECK([ovs-appctl netdev-dummy/receive p7 'in_port(7),eth(src=50:54:00:00:00:09,dst=50:54:00:00:00:0a),eth_type(0x0800),ipv4(src=10.0.0.2,dst=10.0.0.1,proto=1,tos=0,ttl=64,frag=no),icmp(type=8,code=0)'])
+AT_CHECK([ovs-appctl netdev-dummy/receive p8 'in_port(8),eth(src=50:54:00:00:00:0b,dst=50:54:00:00:00:0c),eth_type(0x0800),ipv4(src=10.0.0.3,dst=10.0.0.4,proto=1,tos=0,ttl=64,frag=no),icmp(type=8,code=0)'])
+ovs-appctl time/warp 100
+
+AT_CHECK([ovs-appctl dpif/dump-flows br0 | STRIP_XOUT], [0], [dnl
+skb_priority(0),in_port(1),eth(src=50:54:00:00:00:0b,dst=50:54:00:00:00:0c),eth_type(0x0800),ipv4(src=10.0.0.3/0.0.0.0,dst=10.0.0.4/0.0.0.0,proto=1/0,tos=0/0,ttl=64/0,frag=no/0xff), packets:0, bytes:0, used:never, actions: <del>
+skb_priority(0),in_port(7),eth(src=50:54:00:00:00:09,dst=50:54:00:00:00:0a),eth_type(0x0800),ipv4(src=10.0.0.2/0.0.0.0,dst=10.0.0.1/0.0.0.0,proto=1/0,tos=0/0,ttl=64/0,frag=no/0xff), packets:0, bytes:0, used:never, actions: <del>
+])
+
+AT_CHECK([ovs-appctl dpif/dump-flows br1 | STRIP_XOUT], [0], [dnl
+skb_priority(0),in_port(2),eth(src=50:54:00:00:00:09,dst=50:54:00:00:00:0a),eth_type(0x0800),ipv4(src=10.0.0.2/0.0.0.0,dst=10.0.0.1/0.0.0.0,proto=1/0,tos=0/0,ttl=64/0,frag=no/0xff), packets:0, bytes:0, used:never, actions: <del>
+skb_priority(0),in_port(8),eth(src=50:54:00:00:00:0b,dst=50:54:00:00:00:0c),eth_type(0x0800),ipv4(src=10.0.0.3/0.0.0.0,dst=10.0.0.4/0.0.0.0,proto=1/0,tos=0/0,ttl=64/0,frag=no/0xff), packets:0, bytes:0, used:never, actions: <del>
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
 AT_SETUP([ofproto-dpif - resubmit])
 OVS_VSWITCHD_START
 ADD_OF_PORTS([br0], [1], [10], [11], [12], [13], [14], [15],
@@ -148,7 +194,7 @@ AT_CLEANUP
 AT_SETUP([ofproto-dpif - select group with weight])
 OVS_VSWITCHD_START
 ADD_OF_PORTS([br0], [1], [10], [11], [12])
-AT_CHECK([ovs-ofctl -O OpenFlow12 add-group br0 'group_id=1234,type=select,bucket=output:10,bucket=output:11,weight=2,bucket=output:12,weight=0'])
+AT_CHECK([ovs-ofctl -O OpenFlow12 add-group br0 'group_id=1234,type=select,bucket=output:10,bucket=output:11,weight=2000,bucket=output:12,weight=0'])
 AT_CHECK([ovs-ofctl -O OpenFlow12 add-flow br0 'ip actions=write_actions(group:1234)'])
 AT_CHECK([ovs-appctl ofproto/trace br0 'in_port=1,dl_src=50:54:00:00:00:07,dl_dst=50:54:00:00:00:07,dl_type=0x0800,nw_src=192.168.0.1,nw_dst=192.168.0.2,nw_proto=1,nw_tos=0,nw_ttl=128,icmp_type=8,icmp_code=0'], [0], [stdout])
 AT_CHECK([tail -1 stdout], [0],
@@ -2368,6 +2414,15 @@ AT_CHECK([ovs-appctl dpif/dump-flows br1 | sort | STRIP_USED], [0], [dnl
 skb_priority(0),in_port(3),eth_type(0x0800),ipv4(src=10.0.0.2/0.0.0.0,dst=10.0.0.1/0.0.0.0,proto=1/0,tos=0/0,ttl=64/0,frag=no/0xff), packets:0, bytes:0, used:never, actions:userspace(pid=0,slow_path(controller))
 ])
 
+AT_CHECK([ovs-appctl dpif/dump-flows -m br0 | sort | STRIP_USED], [0], [dnl
+skb_priority(0),skb_mark(0/0),in_port(p1),eth(src=50:54:00:00:00:05/00:00:00:00:00:00,dst=50:54:00:00:00:07/00:00:00:00:00:00),eth_type(0x0800),ipv4(src=192.168.0.1/0.0.0.0,dst=192.168.0.2/0.0.0.0,proto=1/0,tos=0/0,ttl=64/0,frag=no/0xff),icmp(type=8/0,code=0/0), packets:0, bytes:0, used:never, actions:userspace(pid=0,slow_path(controller))
+skb_priority(0),skb_mark(0/0),in_port(p2),eth(src=50:54:00:00:00:07/00:00:00:00:00:00,dst=50:54:00:00:00:05/00:00:00:00:00:00),eth_type(0x0800),ipv4(src=192.168.0.2/0.0.0.0,dst=192.168.0.1/0.0.0.0,proto=1/0,tos=0/0,ttl=64/0,frag=no/0xff),icmp(type=0/0,code=0/0), packets:0, bytes:0, used:never, actions:userspace(pid=0,slow_path(controller))
+])
+
+AT_CHECK([ovs-appctl dpif/dump-flows -m br1 | sort | STRIP_USED], [0], [dnl
+skb_priority(0),skb_mark(0/0),in_port(p3),eth(src=50:54:00:00:00:09/00:00:00:00:00:00,dst=50:54:00:00:00:0a/00:00:00:00:00:00),eth_type(0x0800),ipv4(src=10.0.0.2/0.0.0.0,dst=10.0.0.1/0.0.0.0,proto=1/0,tos=0/0,ttl=64/0,frag=no/0xff),icmp(type=8/0,code=0/0), packets:0, bytes:0, used:never, actions:userspace(pid=0,slow_path(controller))
+])
+
 OVS_VSWITCHD_STOP
 AT_CLEANUP
 
@@ -2445,17 +2500,10 @@ ovs-appctl time/stop
 ovs-appctl time/warp 10000
 
 AT_CHECK([ovs-ofctl -O openflow13 dump-ports br0], [0], [stdout])
-AT_CHECK([sed 's/=[[0-9]][[0-9]]\(\.[[0-9]][[0-9]]*\)\{0,1\}s/=?s/' stdout], [0],
+AT_CHECK([sed -n 's/=[[0-9]][[0-9]]\(\.[[0-9]][[0-9]]*\)\{0,1\}s/=?s/p' stdout], [0],
 [dnl
-OFPST_PORT reply (OF1.3) (xid=0x2): 3 ports
-  port  1: rx pkts=0, bytes=0, drop=0, errs=0, frame=0, over=0, crc=0
-           tx pkts=0, bytes=0, drop=0, errs=0, coll=0
            duration=?s
-  port  2: rx pkts=0, bytes=0, drop=0, errs=0, frame=0, over=0, crc=0
-           tx pkts=0, bytes=0, drop=0, errs=0, coll=0
            duration=?s
-  port LOCAL: rx pkts=0, bytes=0, drop=0, errs=0, frame=0, over=0, crc=0
-           tx pkts=0, bytes=0, drop=0, errs=0, coll=0
            duration=?s
 ])
 OVS_VSWITCHD_STOP
@@ -2464,18 +2512,6 @@ AT_CLEANUP
 dnl ----------------------------------------------------------------------
 AT_BANNER([ofproto-dpif -- megaflows])
 
-# Strips out uninteresting parts of megaflow output, as well as parts
-# that vary from one run to another (e.g., timing and bond actions).
-m4_define([STRIP_USED], [[sed '
-    s/used:[0-9]*\.[0-9]*/used:0.0/
-' | sort]])
-m4_define([STRIP_XOUT], [[sed '
-    s/used:[0-9]*\.[0-9]*/used:0.0/
-    s/actions:.*/actions: <del>/
-    s/packets:[0-9]*/packets:0/
-    s/bytes:[0-9]*/bytes:0/
-' | sort]])
-
 AT_SETUP([ofproto-dpif megaflow - port classification])
 OVS_VSWITCHD_START
 ADD_OF_PORTS([br0], [1], [2])
@@ -3001,11 +3037,9 @@ AT_CHECK([ovs-appctl bfd/show | sed -n '/^.*Session State:.*/p'], [0], [dnl
        Remote Session State: down
 ])
 # bond/show should show 'may-enable: false' for p0.
-AT_CHECK([ovs-appctl bond/show | sed -n '/^.*may_enable:.*/p'], [0], [dnl
+AT_CHECK([ovs-appctl bond/show br0bond | sed -n '/^.*may_enable:.*/p'], [0], [dnl
        may_enable: false
        may_enable: true
-       may_enable: true
-       may_enable: true
 ])
 
 # now enable the bfd on p1 and disable bfd on p0.