AT_BANNER([ofproto-dpif])
AT_SETUP([ofproto-dpif - resubmit])
-OFPROTO_START
+OVS_VSWITCHD_START
AT_DATA([flows.txt], [dnl
table=0 in_port=1 priority=1000 icmp actions=output(10),resubmit(2),output(19),resubmit(3),output(21)
table=0 in_port=2 priority=1500 icmp actions=output(11),resubmit(,1),output(16),resubmit(2,1),output(18)
table=1 in_port=3 priority=1500 icmp actions=output(14),resubmit(,2)
])
AT_CHECK([ovs-ofctl add-flows br0 flows.txt])
-AT_CHECK([ovs-appctl -t test-openflowd ofproto/trace br0 'in_port(1),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=1,tos=0),icmp(type=8,code=0)'], [0], [stdout])
+AT_CHECK([ovs-appctl ofproto/trace br0 'in_port(1),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=1,tos=0,ttl=128,frag=no),icmp(type=8,code=0)'], [0], [stdout])
AT_CHECK([tail -1 stdout], [0],
[Datapath actions: 10,11,12,13,14,15,16,17,18,19,20,21
])
-OFPROTO_STOP
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto-dpif - registers])
+OVS_VSWITCHD_START
+AT_DATA([flows.txt], [dnl
+in_port=90 actions=resubmit:2,resubmit:3,resubmit:4,resubmit:91
+in_port=91 actions=resubmit:5,resubmit:6,resubmit:7,resubmit:92
+in_port=92 actions=resubmit:8,resubmit:9,resubmit:10,resubmit:11
+in_port=2 actions=load:0x000db000->NXM_NX_REG0[[]]
+in_port=3 actions=load:0xdea->NXM_NX_REG0[[20..31]]
+in_port=4 actions=load:0xeef->NXM_NX_REG0[[0..11]]
+in_port=5 actions=move:NXM_NX_REG0[[]]->NXM_NX_REG1[[]]
+in_port=6 actions=load:0x22222222->NXM_NX_REG2[[]]
+in_port=7 actions=move:NXM_NX_REG1[[20..31]]->NXM_NX_REG2[[0..11]]
+in_port=8 actions=move:NXM_NX_REG1[[0..11]]->NXM_NX_REG2[[20..31]]
+in_port=9,reg0=0xdeadbeef actions=output:20
+in_port=10,reg1=0xdeadbeef actions=output:21
+in_port=11,reg2=0xeef22dea actions=output:22
+])
+AT_CHECK([ovs-ofctl add-flows br0 flows.txt])
+AT_CHECK([ovs-appctl ofproto/trace br0 'in_port(90),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=1,tos=0,ttl=128,frag=no),icmp(type=8,code=0)'], [0], [stdout])
+AT_CHECK([tail -1 stdout], [0],
+ [Datapath actions: 20,21,22
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto-dpif - output])
+OVS_VSWITCHD_START
+AT_DATA([flows.txt], [dnl
+in_port=1 actions=resubmit:2,resubmit:3,resubmit:4,resubmit:5,resubmit:6,resubmit:7
+in_port=2 actions=output:9
+in_port=3 actions=load:55->NXM_NX_REG0[[]],output:NXM_NX_REG0[[]],load:66->NXM_NX_REG1[[]]
+in_port=4 actions=output:10,output:NXM_NX_REG0[[]],output:NXM_NX_REG1[[]],output:11
+in_port=5 actions=load:77->NXM_NX_REG0[[0..15]],load:88->NXM_NX_REG0[[16..31]]
+in_port=6 actions=output:NXM_NX_REG0[[0..15]],output:NXM_NX_REG0[[16..31]]
+in_port=7 actions=load:0x110000ff->NXM_NX_REG0[[]],output:NXM_NX_REG0[[]]
+])
+AT_CHECK([ovs-ofctl add-flows br0 flows.txt])
+AT_CHECK([ovs-appctl ofproto/trace br0 'in_port(1),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=1,tos=0,ttl=128,frag=no),icmp(type=8,code=0)'], [0], [stdout])
+AT_CHECK([tail -1 stdout], [0],
+ [Datapath actions: 9,55,10,55,66,11,77,88
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto-dpif - set_tunnel])
+OVS_VSWITCHD_START
+AT_DATA([flows.txt], [dnl
+in_port=90 actions=resubmit:1,resubmit:2,resubmit:3,resubmit:4,resubmit:5
+in_port=1 actions=set_tunnel:1,output:1
+in_port=2 actions=set_tunnel:1,output:2
+in_port=3 actions=set_tunnel:2,set_tunnel:3,output:3
+in_port=4 actions=set_tunnel:4,set_tunnel:3,output:4
+in_port=5 actions=set_tunnel:5
+])
+AT_CHECK([ovs-ofctl add-flows br0 flows.txt])
+AT_CHECK([ovs-appctl ofproto/trace br0 'tun_id(0x1),in_port(90),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=1,tos=0,ttl=128,frag=no),icmp(type=8,code=0)'], [0], [stdout])
+AT_CHECK([tail -1 stdout], [0],
+ [Datapath actions: set(tun_id(0x1)),1,2,set(tun_id(0x3)),3,4
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto-dpif - VLAN handling])
+OVS_VSWITCHD_START(
+ [set Bridge br0 fail-mode=standalone -- \
+ add-port br0 p1 trunks=10,12 -- \
+ add-port br0 p2 tag=10 -- \
+ add-port br0 p3 tag=12 -- \
+ add-port br0 p4 tag=12 -- \
+ add-port br0 p5 vlan_mode=native-tagged tag=10 -- \
+ add-port br0 p6 vlan_mode=native-tagged tag=10 trunks=10,12 -- \
+ add-port br0 p7 vlan_mode=native-untagged tag=12 -- \
+ add-port br0 p8 vlan_mode=native-untagged tag=12 trunks=10,12 -- \
+ set Interface p1 type=dummy -- \
+ set Interface p2 type=dummy -- \
+ set Interface p3 type=dummy -- \
+ set Interface p4 type=dummy -- \
+ set Interface p5 type=dummy -- \
+ set Interface p6 type=dummy -- \
+ set Interface p7 type=dummy -- \
+ set Interface p8 type=dummy --])
+
+AT_CHECK(
+ [ovs-vsctl \
+ -- get Interface p1 ofport \
+ -- get Interface p2 ofport \
+ -- get Interface p3 ofport \
+ -- get Interface p4 ofport \
+ -- get Interface p5 ofport \
+ -- get Interface p6 ofport \
+ -- get Interface p7 ofport \
+ -- get Interface p8 ofport],
+ [0], [stdout])
+set `cat stdout`
+br0=0 p1=$1 p2=$2 p3=$3 p4=$4 p5=$5 p6=$6 p7=$7 p8=$8
+
+dnl Each of these specifies an in_port, a VLAN VID (or "none"), a VLAN
+dnl PCP (used if the VID isn't "none") and the expected set of datapath
+dnl actions.
+dnl
+dnl XXX Some of these actually output an 802.1Q header to an access port
+dnl (see for example the actions for in_port=p3, vlan=0) to qualify the
+dnl packet with a priority. That should be configurable.
+for tuple in \
+ "br0 none 0 drop" \
+ "br0 0 0 drop" \
+ "br0 0 1 drop" \
+ "br0 10 0 p1,p5,p6,p7,p8,pop_vlan,p2" \
+ "br0 10 1 p1,p5,p6,p7,p8,pop_vlan,push_vlan(vid=0,pcp=1),p2" \
+ "br0 11 0 p5,p7" \
+ "br0 11 1 p5,p7" \
+ "br0 12 0 p1,p5,p6,pop_vlan,p3,p4,p7,p8" \
+ "br0 12 1 p1,p5,p6,pop_vlan,push_vlan(vid=0,pcp=1),p3,p4,p7,p8" \
+ "p1 none 0 drop" \
+ "p1 0 0 drop" \
+ "p1 0 1 drop" \
+ "p1 10 0 br0,p5,p6,p7,p8,pop_vlan,p2" \
+ "p1 10 1 br0,p5,p6,p7,p8,pop_vlan,push_vlan(vid=0,pcp=1),p2" \
+ "p1 11 0 drop" \
+ "p1 11 1 drop" \
+ "p1 12 0 br0,p5,p6,pop_vlan,p3,p4,p7,p8" \
+ "p1 12 1 br0,p5,p6,pop_vlan,push_vlan(vid=0,pcp=1),p3,p4,p7,p8" \
+ "p2 none 0 push_vlan(vid=10,pcp=0),br0,p1,p5,p6,p7,p8" \
+ "p2 0 0 pop_vlan,push_vlan(vid=10,pcp=0),br0,p1,p5,p6,p7,p8" \
+ "p2 0 1 pop_vlan,push_vlan(vid=10,pcp=1),br0,p1,p5,p6,p7,p8" \
+ "p2 10 0 drop" \
+ "p2 10 1 drop" \
+ "p2 11 0 drop" \
+ "p2 11 1 drop" \
+ "p2 12 0 drop" \
+ "p2 12 1 drop" \
+ "p3 none 0 p4,p7,p8,push_vlan(vid=12,pcp=0),br0,p1,p5,p6" \
+ "p3 0 0 p4,p7,p8,pop_vlan,push_vlan(vid=12,pcp=0),br0,p1,p5,p6" \
+ "p3 0 1 p4,p7,p8,pop_vlan,push_vlan(vid=12,pcp=1),br0,p1,p5,p6" \
+ "p3 10 0 drop" \
+ "p3 10 1 drop" \
+ "p3 11 0 drop" \
+ "p3 11 1 drop" \
+ "p3 12 0 drop" \
+ "p3 12 1 drop" \
+ "p4 none 0 p3,p7,p8,push_vlan(vid=12,pcp=0),br0,p1,p5,p6" \
+ "p4 0 0 p3,p7,p8,pop_vlan,push_vlan(vid=12,pcp=0),br0,p1,p5,p6" \
+ "p4 0 1 p3,p7,p8,pop_vlan,push_vlan(vid=12,pcp=1),br0,p1,p5,p6" \
+ "p4 10 0 drop" \
+ "p4 10 1 drop" \
+ "p4 11 0 drop" \
+ "p4 11 1 drop" \
+ "p4 12 0 drop" \
+ "p4 12 1 drop" \
+ "p5 none 0 p2,push_vlan(vid=10,pcp=0),br0,p1,p6,p7,p8" \
+ "p5 0 0 p2,pop_vlan,push_vlan(vid=10,pcp=0),br0,p1,p6,p7,p8" \
+ "p5 0 1 p2,pop_vlan,push_vlan(vid=10,pcp=1),br0,p1,p6,p7,p8" \
+ "p5 10 0 br0,p1,p6,p7,p8,pop_vlan,p2" \
+ "p5 10 1 br0,p1,p6,p7,p8,pop_vlan,push_vlan(vid=0,pcp=1),p2" \
+ "p5 11 0 br0,p7" \
+ "p5 11 1 br0,p7" \
+ "p5 12 0 br0,p1,p6,pop_vlan,p3,p4,p7,p8" \
+ "p5 12 1 br0,p1,p6,pop_vlan,push_vlan(vid=0,pcp=1),p3,p4,p7,p8" \
+ "p6 none 0 p2,push_vlan(vid=10,pcp=0),br0,p1,p5,p7,p8" \
+ "p6 0 0 p2,pop_vlan,push_vlan(vid=10,pcp=0),br0,p1,p5,p7,p8" \
+ "p6 0 1 p2,pop_vlan,push_vlan(vid=10,pcp=1),br0,p1,p5,p7,p8" \
+ "p6 10 0 br0,p1,p5,p7,p8,pop_vlan,p2" \
+ "p6 10 1 br0,p1,p5,p7,p8,pop_vlan,push_vlan(vid=0,pcp=1),p2" \
+ "p6 11 0 drop" \
+ "p6 11 1 drop" \
+ "p6 12 0 br0,p1,p5,pop_vlan,p3,p4,p7,p8" \
+ "p6 12 1 br0,p1,p5,pop_vlan,push_vlan(vid=0,pcp=1),p3,p4,p7,p8" \
+ "p7 none 0 p3,p4,p8,push_vlan(vid=12,pcp=0),br0,p1,p5,p6" \
+ "p7 0 0 p3,p4,p8,pop_vlan,push_vlan(vid=12,pcp=0),br0,p1,p5,p6" \
+ "p7 0 1 p3,p4,p8,pop_vlan,push_vlan(vid=12,pcp=1),br0,p1,p5,p6" \
+ "p7 10 0 br0,p1,p5,p6,p8,pop_vlan,p2" \
+ "p7 10 1 br0,p1,p5,p6,p8,pop_vlan,push_vlan(vid=0,pcp=1),p2" \
+ "p7 11 0 br0,p5" \
+ "p7 11 1 br0,p5" \
+ "p7 12 0 br0,p1,p5,p6,pop_vlan,p3,p4,p8" \
+ "p7 12 1 br0,p1,p5,p6,pop_vlan,push_vlan(vid=0,pcp=1),p3,p4,p8" \
+ "p8 none 0 p3,p4,p7,push_vlan(vid=12,pcp=0),br0,p1,p5,p6" \
+ "p8 0 0 p3,p4,p7,pop_vlan,push_vlan(vid=12,pcp=0),br0,p1,p5,p6" \
+ "p8 0 1 p3,p4,p7,pop_vlan,push_vlan(vid=12,pcp=1),br0,p1,p5,p6" \
+ "p8 10 0 br0,p1,p5,p6,p7,pop_vlan,p2" \
+ "p8 10 1 br0,p1,p5,p6,p7,pop_vlan,push_vlan(vid=0,pcp=1),p2" \
+ "p8 11 0 drop" \
+ "p8 11 1 drop" \
+ "p8 12 0 br0,p1,p5,p6,pop_vlan,p3,p4,p7" \
+ "p8 12 1 br0,p1,p5,p6,pop_vlan,push_vlan(vid=0,pcp=1),p3,p4,p7"
+do
+ set $tuple
+ in_port=$1
+ vlan=$2
+ pcp=$3
+ expected=$4
+
+ eval n_in_port=\$$in_port
+ if test $vlan = none; then
+ flow="in_port($n_in_port),eth(src=50:54:00:00:00:01,dst=ff:ff:ff:ff:ff:ff),eth_type(0xabcd)"
+ else
+ flow="in_port($n_in_port),eth(src=50:54:00:00:00:01,dst=ff:ff:ff:ff:ff:ff),eth_type(0x8100),vlan(vid=$vlan,pcp=$pcp),encap(eth_type(0xabcd))"
+ fi
+
+ AT_CHECK([ovs-appctl ofproto/trace br0 "$flow"], [0], [stdout])
+ actual=`tail -1 stdout | sed 's/Datapath actions: //'`
+
+ echo "in_port=$in_port vlan=$vlan"
+ AT_CHECK([ovs-dpctl normalize-actions "$flow" "$expected" br0=$br0 p1=$p1 p2=$p2 p3=$p3 p4=$p4 p5=$p5 p6=$p6 p7=$p7 p8=$p8], [0], [stdout])
+ mv stdout expout
+ AT_CHECK([ovs-dpctl normalize-actions "$flow" "$actual" br0=$br0 p1=$p1 p2=$p2 p3=$p3 p4=$p4 p5=$p5 p6=$p6 p7=$p7 p8=$p8], [0], [expout])
+done
+
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto-dpif - fragment handling])
+OVS_VSWITCHD_START
+AT_DATA([flows.txt], [dnl
+priority=75 tcp ip_frag=no tp_dst=80 actions=output:1
+priority=75 tcp ip_frag=first tp_dst=80 actions=output:2
+priority=75 tcp ip_frag=later tp_dst=80 actions=output:3
+priority=50 tcp ip_frag=no actions=output:4
+priority=50 tcp ip_frag=first actions=output:5
+priority=50 tcp ip_frag=later actions=output:6
+])
+AT_CHECK([ovs-ofctl replace-flows br0 flows.txt])
+
+base_flow="in_port(90),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=6,tos=0,ttl=128"
+no_flow="$base_flow,frag=no),tcp(src=12345,dst=80)"
+first_flow="$base_flow,frag=first),tcp(src=12345,dst=80)"
+later_flow="$base_flow,frag=later)"
+
+ # mode no first later
+for tuple in \
+ 'normal 1 5 6' \
+ 'drop 1 drop drop' \
+ 'nx-match 1 2 6'
+do
+ set $tuple
+ mode=$1
+ no=$2
+ first=$3
+ later=$4
+
+ AT_CHECK([ovs-ofctl set-frags br0 $mode])
+ for type in no first later; do
+ eval flow=\$${type}_flow exp_output=\$$type
+ AT_CHECK([ovs-appctl ofproto/trace br0 "$flow"], [0], [stdout])
+ AT_CHECK_UNQUOTED([tail -1 stdout], [0], [Datapath actions: $exp_output
+])
+ done
+done
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto-dpif - exit])
+OVS_VSWITCHD_START
+AT_DATA([flows.txt], [dnl
+in_port=1 actions=output:10,exit,output:11
+in_port=2 actions=output:12,resubmit:1,output:12
+in_port=3 actions=output:13,resubmit:2,output:14
+])
+AT_CHECK([ovs-ofctl add-flows br0 flows.txt])
+AT_CHECK([ovs-appctl ofproto/trace br0 'in_port(1),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=1,tos=0,ttl=128,frag=no),icmp(type=8,code=0)'], [0], [stdout])
+AT_CHECK([tail -1 stdout], [0],
+ [Datapath actions: 10
+])
+AT_CHECK([ovs-appctl ofproto/trace br0 'in_port(2),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=1,tos=0,ttl=128,frag=no),icmp(type=8,code=0)'], [0], [stdout])
+AT_CHECK([tail -1 stdout], [0],
+ [Datapath actions: 12,10
+])
+AT_CHECK([ovs-appctl ofproto/trace br0 'in_port(3),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=1,tos=0,ttl=128,frag=no),icmp(type=8,code=0)'], [0], [stdout])
+AT_CHECK([tail -1 stdout], [0],
+ [Datapath actions: 13,12,10
+])
+OVS_VSWITCHD_STOP
AT_CLEANUP
git://git.onelab.eu / sliver-openvswitch.git / blobdiff