OVS_VSWITCHD_STOP
AT_CLEANUP
+AT_SETUP([ofproto-dpif - output, OFPP_NONE ingress port])
+OVS_VSWITCHD_START(
+ [add-port br0 p1 -- set Interface p1 type=dummy --\
+ add-port br0 p2 -- set Interface p2 type=dummy])
+
+AT_CHECK(
+ [ovs-vsctl \
+ -- get Interface p1 ofport \
+ -- get Interface p2 ofport],
+ [0], [stdout])
+set `cat stdout`
+br0=0 p1=$1 p2=$2
+
+AT_CHECK([ovs-ofctl add-flow br0 action=normal])
+
+# "in_port" defaults to OFPP_NONE if it's not specified.
+flow="eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=1,tos=0,ttl=128,frag=no),icmp(type=8,code=0)"
+AT_CHECK([ovs-appctl ofproto/trace br0 "$flow"], [0], [stdout])
+actual=`tail -1 stdout | sed 's/Datapath actions: //'`
+
+expected="$br0,$p1,$p2"
+AT_CHECK([ovs-dpctl normalize-actions "$flow" "$expected" br0=$br0 p1=$p1 p2=$p2], [0], [stdout])
+mv stdout expout
+AT_CHECK([ovs-dpctl normalize-actions "$flow" "$actual" br0=$br0 p1=$p1 p2=$p2], [0], [expout])
+
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto-dpif - DSCP])
+dnl This test assumes port p1 is allocated OpenFlow port number 1.
+OVS_VSWITCHD_START([add-port br0 p1 -- set Interface p1 type=dummy])
+AT_DATA([flows.txt], [dnl
+actions=output:65534,enqueue:1:1,enqueue:1:2,enqueue:1:2,enqueue:1:1,output:1,mod_nw_tos:0,output:1,output:65534
+])
+AT_CHECK([ovs-ofctl add-flows br0 flows.txt])
+AT_CHECK([ovs-vsctl -- \
+ set Port p1 qos=@newqos --\
+ --id=@newqos create QoS type=linux-htb queues=1=@q1,2=@q2 --\
+ --id=@q1 create Queue dscp=1 --\
+ --id=@q2 create Queue dscp=2], [0], [ignore])
+AT_CHECK([ovs-appctl ofproto/trace br0 'in_port(9),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=1.1.1.1,dst=2.2.2.2,proto=1,tos=0xff,ttl=128,frag=no),icmp(type=8,code=0)'], [0], [stdout])
+AT_CHECK([tail -1 stdout], [0],
+ [Datapath actions: dnl
+0,dnl
+set(ipv4(src=1.1.1.1,dst=2.2.2.2,proto=1,tos=0x7,ttl=128,frag=no)),set(priority(1)),1,dnl
+set(ipv4(src=1.1.1.1,dst=2.2.2.2,proto=1,tos=0xb,ttl=128,frag=no)),set(priority(2)),1,dnl
+1,dnl
+set(ipv4(src=1.1.1.1,dst=2.2.2.2,proto=1,tos=0x7,ttl=128,frag=no)),set(priority(1)),1,dnl
+set(ipv4(src=1.1.1.1,dst=2.2.2.2,proto=1,tos=0xff,ttl=128,frag=no)),set(priority(0)),1,dnl
+set(ipv4(src=1.1.1.1,dst=2.2.2.2,proto=1,tos=0x3,ttl=128,frag=no)),1,dnl
+0
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto-dpif - output/flood flags])
+dnl This test assumes that OpenFlow port numbers are allocated in order
+dnl starting from one. It does not necessarily require that they are allocated
+dnl in the same order that they are named in the database. Just that the
+dnl following command guarantees OpenFlow port 65534, and ports 1-7 exist in
+dnl the bridge.
+OVS_VSWITCHD_START([dnl
+ add-port br0 p1 -- set Interface p1 type=dummy --\
+ add-port br0 p2 -- set Interface p2 type=dummy --\
+ add-port br0 p3 -- set Interface p3 type=dummy --\
+ add-port br0 p4 -- set Interface p4 type=dummy --\
+ add-port br0 p5 -- set Interface p5 type=dummy --\
+ add-port br0 p6 -- set Interface p6 type=dummy --\
+ add-port br0 p7 -- set Interface p7 type=dummy ])
+
+AT_DATA([flows.txt], [dnl
+in_port=1 actions=flood
+in_port=2 actions=all
+in_port=3 actions=output:65534,output:1,output:2,output:3,output:4,output:5,output:6,output:7
+in_port=4 actions=enqueue:65534:1,enqueue:1:1,enqueue:2:1,enqueue:3:2,enqueue:4:1,enqueue:5:1,enqueue:6:1,enqueue:7:1
+])
+AT_CHECK([ovs-ofctl add-flows br0 flows.txt])
+AT_CHECK([ovs-ofctl mod-port br0 5 noforward])
+AT_CHECK([ovs-ofctl mod-port br0 6 noflood])
+
+AT_CHECK([ovs-appctl ofproto/trace br0 'in_port(1),eth(src=00:00:00:00:00:01,dst=00:00:00:00:00:02),eth_type(0x0900)'], [0], [stdout])
+AT_CHECK([tail -1 stdout \
+| sed -e 's/Datapath actions: //' | tr ',' '\n' | sort], [0], [dnl
+0
+2
+3
+4
+7
+])
+
+AT_CHECK([ovs-appctl ofproto/trace br0 'in_port(2),eth(src=00:00:00:00:00:01,dst=00:00:00:00:00:02),eth_type(0x0900)'], [0], [stdout])
+AT_CHECK([tail -1 stdout \
+| sed -e 's/Datapath actions: //' | tr ',' '\n' | sort], [0], [dnl
+0
+1
+3
+4
+6
+7
+])
+
+AT_CHECK([ovs-appctl ofproto/trace br0 'in_port(3),eth(src=00:00:00:00:00:01,dst=00:00:00:00:00:02),eth_type(0x0900)'], [0], [stdout])
+AT_CHECK([tail -1 stdout], [0],
+ [Datapath actions: 0,1,2,4,6,7
+])
+
+AT_CHECK([ovs-appctl ofproto/trace br0 'in_port(4),eth(src=00:00:00:00:00:01,dst=00:00:00:00:00:02),eth_type(0x0900)'], [0], [stdout])
+AT_CHECK([tail -1 stdout], [0],
+ [Datapath actions: set(priority(1)),0,1,2,set(priority(2)),3,set(priority(1)),6,7
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
AT_SETUP([ofproto-dpif - set_tunnel])
OVS_VSWITCHD_START
AT_DATA([flows.txt], [dnl
OVS_VSWITCHD_STOP
AT_CLEANUP
+AT_SETUP([ofproto-dpif - controller])
+OVS_VSWITCHD_START([dnl
+ add-port br0 p1 -- set Interface p1 type=dummy
+])
+
+AT_CAPTURE_FILE([ofctl_monitor.log])
+AT_DATA([flows.txt], [dnl
+cookie=0x0 dl_src=10:11:11:11:11:11 actions=controller
+cookie=0x1 dl_src=20:22:22:22:22:22 actions=controller,resubmit(80,1)
+cookie=0x2 dl_src=30:33:33:33:33:33 actions=mod_vlan_vid:15,controller
+
+cookie=0x3 table=1 in_port=80 actions=load:1->NXM_NX_REG0[[]],mod_vlan_vid:80,controller,resubmit(81,2)
+cookie=0x4 table=2 in_port=81 actions=load:2->NXM_NX_REG1[[]],mod_dl_src:80:81:81:81:81:81,controller,resubmit(82,3)
+cookie=0x5 table=3 in_port=82 actions=load:3->NXM_NX_REG2[[]],mod_dl_dst:82:82:82:82:82:82,controller,resubmit(83,4)
+cookie=0x6 table=4 in_port=83 actions=load:4->NXM_NX_REG3[[]],mod_nw_src:83.83.83.83,controller,resubmit(84,5)
+cookie=0x7 table=5 in_port=84 actions=load:5->NXM_NX_REG4[[]],load:6->NXM_NX_TUN_ID[[]],mod_nw_dst:84.84.84.84,controller,resubmit(85,6)
+cookie=0x8 table=6 in_port=85 actions=mod_tp_src:85,controller,resubmit(86,7)
+cookie=0x9 table=7 in_port=86 actions=mod_tp_dst:86,controller,controller
+])
+AT_CHECK([ovs-ofctl add-flows br0 flows.txt])
+
+dnl Flow miss.
+AT_CHECK([ovs-ofctl monitor -P openflow10 br0 65534 --detach --pidfile 2> ofctl_monitor.log])
+
+for i in 1 2 3 ; do
+ ovs-appctl netdev-dummy/receive p1 'in_port(1),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=6,tos=0,ttl=64,frag=no),tcp(src=8,dst=9)'
+done
+
+OVS_WAIT_UNTIL([ovs-appctl -t ovs-ofctl exit])
+AT_CHECK([cat ofctl_monitor.log], [0], [dnl
+OFPT_PACKET_IN (xid=0x0): total_len=60 in_port=1 data_len=60 (unbuffered)
+priority:0,tunnel:0,in_port:0000,tci(0) mac(50:54:00:00:00:05->50:54:00:00:00:07) type:0800 proto:6 tos:0 ttl:0 ip(192.168.0.1->192.168.0.2) port(8->9) tcp_csum:0
+dnl
+OFPT_PACKET_IN (xid=0x0): total_len=60 in_port=1 data_len=60 (unbuffered)
+priority:0,tunnel:0,in_port:0000,tci(0) mac(50:54:00:00:00:05->50:54:00:00:00:07) type:0800 proto:6 tos:0 ttl:0 ip(192.168.0.1->192.168.0.2) port(8->9) tcp_csum:0
+dnl
+OFPT_PACKET_IN (xid=0x0): total_len=60 in_port=1 data_len=60 (unbuffered)
+priority:0,tunnel:0,in_port:0000,tci(0) mac(50:54:00:00:00:05->50:54:00:00:00:07) type:0800 proto:6 tos:0 ttl:0 ip(192.168.0.1->192.168.0.2) port(8->9) tcp_csum:0
+])
+
+dnl Singleton controller action.
+AT_CHECK([ovs-ofctl monitor -P openflow10 br0 65534 --detach --pidfile 2> ofctl_monitor.log])
+
+for i in 1 2 3 ; do
+ ovs-appctl netdev-dummy/receive p1 'in_port(1),eth(src=10:11:11:11:11:11,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=6,tos=0,ttl=64,frag=no),tcp(src=8,dst=10)'
+done
+
+OVS_WAIT_UNTIL([ovs-appctl -t ovs-ofctl exit])
+AT_CHECK([cat ofctl_monitor.log], [0], [dnl
+OFPT_PACKET_IN (xid=0x0): total_len=60 in_port=1 (via action) data_len=60 (unbuffered)
+priority:0,tunnel:0,in_port:0000,tci(0) mac(10:11:11:11:11:11->50:54:00:00:00:07) type:0800 proto:6 tos:0 ttl:0 ip(192.168.0.1->192.168.0.2) port(8->10) tcp_csum:0
+dnl
+OFPT_PACKET_IN (xid=0x0): total_len=60 in_port=1 (via action) data_len=60 (unbuffered)
+priority:0,tunnel:0,in_port:0000,tci(0) mac(10:11:11:11:11:11->50:54:00:00:00:07) type:0800 proto:6 tos:0 ttl:0 ip(192.168.0.1->192.168.0.2) port(8->10) tcp_csum:0
+dnl
+OFPT_PACKET_IN (xid=0x0): total_len=60 in_port=1 (via action) data_len=60 (unbuffered)
+priority:0,tunnel:0,in_port:0000,tci(0) mac(10:11:11:11:11:11->50:54:00:00:00:07) type:0800 proto:6 tos:0 ttl:0 ip(192.168.0.1->192.168.0.2) port(8->10) tcp_csum:0
+])
+
+dnl Modified controller action.
+AT_CHECK([ovs-ofctl monitor -P openflow10 br0 65534 --detach --pidfile 2> ofctl_monitor.log])
+
+for i in 1 2 3 ; do
+ ovs-appctl netdev-dummy/receive p1 'in_port(1),eth(src=30:33:33:33:33:33,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=6,tos=0,ttl=64,frag=no),tcp(src=8,dst=10)'
+done
+
+OVS_WAIT_UNTIL([ovs-appctl -t ovs-ofctl exit])
+AT_CHECK([cat ofctl_monitor.log], [0], [dnl
+OFPT_PACKET_IN (xid=0x0): total_len=64 in_port=1 (via action) data_len=64 (unbuffered)
+priority:0,tunnel:0,in_port:0000,tci(vlan:15,pcp:0) mac(30:33:33:33:33:33->50:54:00:00:00:07) type:0800 proto:6 tos:0 ttl:0 ip(192.168.0.1->192.168.0.2) port(8->10) tcp_csum:0
+dnl
+OFPT_PACKET_IN (xid=0x0): total_len=64 in_port=1 (via action) data_len=64 (unbuffered)
+priority:0,tunnel:0,in_port:0000,tci(vlan:15,pcp:0) mac(30:33:33:33:33:33->50:54:00:00:00:07) type:0800 proto:6 tos:0 ttl:0 ip(192.168.0.1->192.168.0.2) port(8->10) tcp_csum:0
+dnl
+OFPT_PACKET_IN (xid=0x0): total_len=64 in_port=1 (via action) data_len=64 (unbuffered)
+priority:0,tunnel:0,in_port:0000,tci(vlan:15,pcp:0) mac(30:33:33:33:33:33->50:54:00:00:00:07) type:0800 proto:6 tos:0 ttl:0 ip(192.168.0.1->192.168.0.2) port(8->10) tcp_csum:0
+])
+
+dnl Checksum TCP.
+AT_CHECK([ovs-ofctl monitor br0 65534 -P nxm --detach --pidfile 2> ofctl_monitor.log])
+
+for i in 1 ; do
+ ovs-appctl netdev-dummy/receive p1 'in_port(1),eth(src=20:22:22:22:22:22,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=6,tos=0,ttl=64,frag=no),tcp(src=8,dst=11)'
+done
+
+OVS_WAIT_UNTIL([ovs-appctl -t ovs-ofctl exit])
+AT_CHECK([cat ofctl_monitor.log], [0], [dnl
+NXT_PACKET_IN (xid=0x0): cookie=0x1 total_len=60 in_port=1 tun_id=0x0 reg0=0x0 reg1=0x0 reg2=0x0 reg3=0x0 reg4=0x0 (via action) data_len=60 (unbuffered)
+priority:0,tunnel:0,in_port:0000,tci(0) mac(20:22:22:22:22:22->50:54:00:00:00:07) type:0800 proto:6 tos:0 ttl:0 ip(192.168.0.1->192.168.0.2) port(8->11) tcp_csum:0
+dnl
+NXT_PACKET_IN (xid=0x0): table_id=1 cookie=0x3 total_len=64 in_port=1 tun_id=0x0 reg0=0x1 reg1=0x0 reg2=0x0 reg3=0x0 reg4=0x0 (via action) data_len=64 (unbuffered)
+priority:0,tunnel:0,in_port:0000,tci(vlan:80,pcp:0) mac(20:22:22:22:22:22->50:54:00:00:00:07) type:0800 proto:6 tos:0 ttl:0 ip(192.168.0.1->192.168.0.2) port(8->11) tcp_csum:0
+dnl
+NXT_PACKET_IN (xid=0x0): table_id=2 cookie=0x4 total_len=64 in_port=1 tun_id=0x0 reg0=0x1 reg1=0x2 reg2=0x0 reg3=0x0 reg4=0x0 (via action) data_len=64 (unbuffered)
+priority:0,tunnel:0,in_port:0000,tci(vlan:80,pcp:0) mac(80:81:81:81:81:81->50:54:00:00:00:07) type:0800 proto:6 tos:0 ttl:0 ip(192.168.0.1->192.168.0.2) port(8->11) tcp_csum:0
+dnl
+NXT_PACKET_IN (xid=0x0): table_id=3 cookie=0x5 total_len=64 in_port=1 tun_id=0x0 reg0=0x1 reg1=0x2 reg2=0x3 reg3=0x0 reg4=0x0 (via action) data_len=64 (unbuffered)
+priority:0,tunnel:0,in_port:0000,tci(vlan:80,pcp:0) mac(80:81:81:81:81:81->82:82:82:82:82:82) type:0800 proto:6 tos:0 ttl:0 ip(192.168.0.1->192.168.0.2) port(8->11) tcp_csum:0
+dnl
+NXT_PACKET_IN (xid=0x0): table_id=4 cookie=0x6 total_len=64 in_port=1 tun_id=0x0 reg0=0x1 reg1=0x2 reg2=0x3 reg3=0x4 reg4=0x0 (via action) data_len=64 (unbuffered)
+priority:0,tunnel:0,in_port:0000,tci(vlan:80,pcp:0) mac(80:81:81:81:81:81->82:82:82:82:82:82) type:0800 proto:6 tos:0 ttl:0 ip(83.83.83.83->192.168.0.2) port(8->11) tcp_csum:1a03
+dnl
+NXT_PACKET_IN (xid=0x0): table_id=5 cookie=0x7 total_len=64 in_port=1 tun_id=0x6 reg0=0x1 reg1=0x2 reg2=0x3 reg3=0x4 reg4=0x5 (via action) data_len=64 (unbuffered)
+priority:0,tunnel:0,in_port:0000,tci(vlan:80,pcp:0) mac(80:81:81:81:81:81->82:82:82:82:82:82) type:0800 proto:6 tos:0 ttl:0 ip(83.83.83.83->84.84.84.84) port(8->11) tcp_csum:3205
+dnl
+NXT_PACKET_IN (xid=0x0): table_id=6 cookie=0x8 total_len=64 in_port=1 tun_id=0x6 reg0=0x1 reg1=0x2 reg2=0x3 reg3=0x4 reg4=0x5 (via action) data_len=64 (unbuffered)
+priority:0,tunnel:0,in_port:0000,tci(vlan:80,pcp:0) mac(80:81:81:81:81:81->82:82:82:82:82:82) type:0800 proto:6 tos:0 ttl:0 ip(83.83.83.83->84.84.84.84) port(85->11) tcp_csum:31b8
+dnl
+NXT_PACKET_IN (xid=0x0): table_id=7 cookie=0x9 total_len=64 in_port=1 tun_id=0x6 reg0=0x1 reg1=0x2 reg2=0x3 reg3=0x4 reg4=0x5 (via action) data_len=64 (unbuffered)
+priority:0,tunnel:0,in_port:0000,tci(vlan:80,pcp:0) mac(80:81:81:81:81:81->82:82:82:82:82:82) type:0800 proto:6 tos:0 ttl:0 ip(83.83.83.83->84.84.84.84) port(85->86) tcp_csum:316d
+dnl
+NXT_PACKET_IN (xid=0x0): table_id=7 cookie=0x9 total_len=64 in_port=1 tun_id=0x6 reg0=0x1 reg1=0x2 reg2=0x3 reg3=0x4 reg4=0x5 (via action) data_len=64 (unbuffered)
+priority:0,tunnel:0,in_port:0000,tci(vlan:80,pcp:0) mac(80:81:81:81:81:81->82:82:82:82:82:82) type:0800 proto:6 tos:0 ttl:0 ip(83.83.83.83->84.84.84.84) port(85->86) tcp_csum:316d
+])
+
+dnl Checksum UDP.
+AT_CHECK([ovs-ofctl monitor br0 65534 --detach --pidfile 2> ofctl_monitor.log])
+
+for i in 1 ; do
+ ovs-appctl netdev-dummy/receive p1 '50 54 00 00 00 07 20 22 22 22 22 22 08 00 45 00 00 1C 00 00 00 00 00 11 00 00 C0 A8 00 01 C0 A8 00 02 00 08 00 0B 00 00 12 34 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00'
+done
+
+OVS_WAIT_UNTIL([ovs-appctl -t ovs-ofctl exit])
+AT_CHECK([cat ofctl_monitor.log], [0], [dnl
+NXT_PACKET_IN (xid=0x0): cookie=0x1 total_len=60 in_port=1 tun_id=0x0 reg0=0x0 reg1=0x0 reg2=0x0 reg3=0x0 reg4=0x0 (via action) data_len=60 (unbuffered)
+priority:0,tunnel:0,in_port:0000,tci(0) mac(20:22:22:22:22:22->50:54:00:00:00:07) type:0800 proto:17 tos:0 ttl:0 ip(192.168.0.1->192.168.0.2) port(8->11) udp_csum:1234
+dnl
+NXT_PACKET_IN (xid=0x0): table_id=1 cookie=0x3 total_len=64 in_port=1 tun_id=0x0 reg0=0x1 reg1=0x0 reg2=0x0 reg3=0x0 reg4=0x0 (via action) data_len=64 (unbuffered)
+priority:0,tunnel:0,in_port:0000,tci(vlan:80,pcp:0) mac(20:22:22:22:22:22->50:54:00:00:00:07) type:0800 proto:17 tos:0 ttl:0 ip(192.168.0.1->192.168.0.2) port(8->11) udp_csum:1234
+dnl
+NXT_PACKET_IN (xid=0x0): table_id=2 cookie=0x4 total_len=64 in_port=1 tun_id=0x0 reg0=0x1 reg1=0x2 reg2=0x0 reg3=0x0 reg4=0x0 (via action) data_len=64 (unbuffered)
+priority:0,tunnel:0,in_port:0000,tci(vlan:80,pcp:0) mac(80:81:81:81:81:81->50:54:00:00:00:07) type:0800 proto:17 tos:0 ttl:0 ip(192.168.0.1->192.168.0.2) port(8->11) udp_csum:1234
+dnl
+NXT_PACKET_IN (xid=0x0): table_id=3 cookie=0x5 total_len=64 in_port=1 tun_id=0x0 reg0=0x1 reg1=0x2 reg2=0x3 reg3=0x0 reg4=0x0 (via action) data_len=64 (unbuffered)
+priority:0,tunnel:0,in_port:0000,tci(vlan:80,pcp:0) mac(80:81:81:81:81:81->82:82:82:82:82:82) type:0800 proto:17 tos:0 ttl:0 ip(192.168.0.1->192.168.0.2) port(8->11) udp_csum:1234
+dnl
+NXT_PACKET_IN (xid=0x0): table_id=4 cookie=0x6 total_len=64 in_port=1 tun_id=0x0 reg0=0x1 reg1=0x2 reg2=0x3 reg3=0x4 reg4=0x0 (via action) data_len=64 (unbuffered)
+priority:0,tunnel:0,in_port:0000,tci(vlan:80,pcp:0) mac(80:81:81:81:81:81->82:82:82:82:82:82) type:0800 proto:17 tos:0 ttl:0 ip(83.83.83.83->192.168.0.2) port(8->11) udp_csum:2c37
+dnl
+NXT_PACKET_IN (xid=0x0): table_id=5 cookie=0x7 total_len=64 in_port=1 tun_id=0x6 reg0=0x1 reg1=0x2 reg2=0x3 reg3=0x4 reg4=0x5 (via action) data_len=64 (unbuffered)
+priority:0,tunnel:0,in_port:0000,tci(vlan:80,pcp:0) mac(80:81:81:81:81:81->82:82:82:82:82:82) type:0800 proto:17 tos:0 ttl:0 ip(83.83.83.83->84.84.84.84) port(8->11) udp_csum:4439
+dnl
+NXT_PACKET_IN (xid=0x0): table_id=6 cookie=0x8 total_len=64 in_port=1 tun_id=0x6 reg0=0x1 reg1=0x2 reg2=0x3 reg3=0x4 reg4=0x5 (via action) data_len=64 (unbuffered)
+priority:0,tunnel:0,in_port:0000,tci(vlan:80,pcp:0) mac(80:81:81:81:81:81->82:82:82:82:82:82) type:0800 proto:17 tos:0 ttl:0 ip(83.83.83.83->84.84.84.84) port(85->11) udp_csum:43ec
+dnl
+NXT_PACKET_IN (xid=0x0): table_id=7 cookie=0x9 total_len=64 in_port=1 tun_id=0x6 reg0=0x1 reg1=0x2 reg2=0x3 reg3=0x4 reg4=0x5 (via action) data_len=64 (unbuffered)
+priority:0,tunnel:0,in_port:0000,tci(vlan:80,pcp:0) mac(80:81:81:81:81:81->82:82:82:82:82:82) type:0800 proto:17 tos:0 ttl:0 ip(83.83.83.83->84.84.84.84) port(85->86) udp_csum:43a1
+dnl
+NXT_PACKET_IN (xid=0x0): table_id=7 cookie=0x9 total_len=64 in_port=1 tun_id=0x6 reg0=0x1 reg1=0x2 reg2=0x3 reg3=0x4 reg4=0x5 (via action) data_len=64 (unbuffered)
+priority:0,tunnel:0,in_port:0000,tci(vlan:80,pcp:0) mac(80:81:81:81:81:81->82:82:82:82:82:82) type:0800 proto:17 tos:0 ttl:0 ip(83.83.83.83->84.84.84.84) port(85->86) udp_csum:43a1
+])
+
+AT_CHECK([ovs-ofctl dump-flows br0 | STRIP_DURATION | sort], [0], [dnl
+ cookie=0x0, duration=?s, table=0, n_packets=3, n_bytes=180, dl_src=10:11:11:11:11:11 actions=CONTROLLER:65535
+ cookie=0x1, duration=?s, table=0, n_packets=2, n_bytes=120, dl_src=20:22:22:22:22:22 actions=CONTROLLER:65535,resubmit(80,1)
+ cookie=0x2, duration=?s, table=0, n_packets=3, n_bytes=180, dl_src=30:33:33:33:33:33 actions=mod_vlan_vid:15,CONTROLLER:65535
+ cookie=0x3, duration=?s, table=1, n_packets=2, n_bytes=120, in_port=80 actions=load:0x1->NXM_NX_REG0[[]],mod_vlan_vid:80,CONTROLLER:65535,resubmit(81,2)
+ cookie=0x4, duration=?s, table=2, n_packets=2, n_bytes=120, in_port=81 actions=load:0x2->NXM_NX_REG1[[]],mod_dl_src:80:81:81:81:81:81,CONTROLLER:65535,resubmit(82,3)
+ cookie=0x5, duration=?s, table=3, n_packets=2, n_bytes=120, in_port=82 actions=load:0x3->NXM_NX_REG2[[]],mod_dl_dst:82:82:82:82:82:82,CONTROLLER:65535,resubmit(83,4)
+ cookie=0x6, duration=?s, table=4, n_packets=2, n_bytes=120, in_port=83 actions=load:0x4->NXM_NX_REG3[[]],mod_nw_src:83.83.83.83,CONTROLLER:65535,resubmit(84,5)
+ cookie=0x7, duration=?s, table=5, n_packets=2, n_bytes=120, in_port=84 actions=load:0x5->NXM_NX_REG4[[]],load:0x6->NXM_NX_TUN_ID[[]],mod_nw_dst:84.84.84.84,CONTROLLER:65535,resubmit(85,6)
+ cookie=0x8, duration=?s, table=6, n_packets=2, n_bytes=120, in_port=85 actions=mod_tp_src:85,CONTROLLER:65535,resubmit(86,7)
+ cookie=0x9, duration=?s, table=7, n_packets=2, n_bytes=120, in_port=86 actions=mod_tp_dst:86,CONTROLLER:65535,CONTROLLER:65535
+NXST_FLOW reply (xid=0x4):
+])
+
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
AT_SETUP([ofproto-dpif - VLAN handling])
OVS_VSWITCHD_START(
[set Bridge br0 fail-mode=standalone -- \
add-port br0 p1 trunks=10,12 -- \
add-port br0 p2 tag=10 -- \
- add-port br0 p3 tag=12 -- \
+ add-port br0 p3 tag=12 \
+ other-config:priority-tags=true -- \
add-port br0 p4 tag=12 -- \
add-port br0 p5 vlan_mode=native-tagged tag=10 -- \
add-port br0 p6 vlan_mode=native-tagged tag=10 trunks=10,12 -- \
add-port br0 p7 vlan_mode=native-untagged tag=12 -- \
- add-port br0 p8 vlan_mode=native-untagged tag=12 trunks=10,12 -- \
+ add-port br0 p8 vlan_mode=native-untagged tag=12 trunks=10,12 \
+ other-config:priority-tags=true -- \
set Interface p1 type=dummy -- \
set Interface p2 type=dummy -- \
set Interface p3 type=dummy -- \
dnl Each of these specifies an in_port, a VLAN VID (or "none"), a VLAN
dnl PCP (used if the VID isn't "none") and the expected set of datapath
dnl actions.
-dnl
-dnl XXX Some of these actually output an 802.1Q header to an access port
-dnl (see for example the actions for in_port=p3, vlan=0) to qualify the
-dnl packet with a priority. That should be configurable.
for tuple in \
"br0 none 0 drop" \
"br0 0 0 drop" \
"br0 0 1 drop" \
"br0 10 0 p1,p5,p6,p7,p8,pop_vlan,p2" \
- "br0 10 1 p1,p5,p6,p7,p8,pop_vlan,push_vlan(vid=0,pcp=1),p2" \
+ "br0 10 1 p1,p5,p6,p7,p8,pop_vlan,p2" \
"br0 11 0 p5,p7" \
"br0 11 1 p5,p7" \
"br0 12 0 p1,p5,p6,pop_vlan,p3,p4,p7,p8" \
- "br0 12 1 p1,p5,p6,pop_vlan,push_vlan(vid=0,pcp=1),p3,p4,p7,p8" \
+ "br0 12 1 p1,p5,p6,pop_vlan,p4,p7,push_vlan(vid=0,pcp=1),p3,p8" \
"p1 none 0 drop" \
"p1 0 0 drop" \
"p1 0 1 drop" \
"p1 10 0 br0,p5,p6,p7,p8,pop_vlan,p2" \
- "p1 10 1 br0,p5,p6,p7,p8,pop_vlan,push_vlan(vid=0,pcp=1),p2" \
+ "p1 10 1 br0,p5,p6,p7,p8,pop_vlan,p2" \
"p1 11 0 drop" \
"p1 11 1 drop" \
"p1 12 0 br0,p5,p6,pop_vlan,p3,p4,p7,p8" \
- "p1 12 1 br0,p5,p6,pop_vlan,push_vlan(vid=0,pcp=1),p3,p4,p7,p8" \
+ "p1 12 1 br0,p5,p6,pop_vlan,p4,p7,push_vlan(vid=0,pcp=1),p3,p8" \
"p2 none 0 push_vlan(vid=10,pcp=0),br0,p1,p5,p6,p7,p8" \
"p2 0 0 pop_vlan,push_vlan(vid=10,pcp=0),br0,p1,p5,p6,p7,p8" \
"p2 0 1 pop_vlan,push_vlan(vid=10,pcp=1),br0,p1,p5,p6,p7,p8" \
"p2 12 0 drop" \
"p2 12 1 drop" \
"p3 none 0 p4,p7,p8,push_vlan(vid=12,pcp=0),br0,p1,p5,p6" \
- "p3 0 0 p4,p7,p8,pop_vlan,push_vlan(vid=12,pcp=0),br0,p1,p5,p6" \
- "p3 0 1 p4,p7,p8,pop_vlan,push_vlan(vid=12,pcp=1),br0,p1,p5,p6" \
+ "p3 0 0 pop_vlan,p4,p7,p8,push_vlan(vid=12,pcp=0),br0,p1,p5,p6" \
+ "p3 0 1 p8,pop_vlan,p4,p7,push_vlan(vid=12,pcp=1),br0,p1,p5,p6" \
"p3 10 0 drop" \
"p3 10 1 drop" \
"p3 11 0 drop" \
"p3 12 0 drop" \
"p3 12 1 drop" \
"p4 none 0 p3,p7,p8,push_vlan(vid=12,pcp=0),br0,p1,p5,p6" \
- "p4 0 0 p3,p7,p8,pop_vlan,push_vlan(vid=12,pcp=0),br0,p1,p5,p6" \
- "p4 0 1 p3,p7,p8,pop_vlan,push_vlan(vid=12,pcp=1),br0,p1,p5,p6" \
+ "p4 0 0 pop_vlan,p3,p7,p8,push_vlan(vid=12,pcp=0),br0,p1,p5,p6" \
+ "p4 0 1 p3,p8,pop_vlan,p7,push_vlan(vid=12,pcp=1),br0,p1,p5,p6" \
"p4 10 0 drop" \
"p4 10 1 drop" \
"p4 11 0 drop" \
"p4 12 0 drop" \
"p4 12 1 drop" \
"p5 none 0 p2,push_vlan(vid=10,pcp=0),br0,p1,p6,p7,p8" \
- "p5 0 0 p2,pop_vlan,push_vlan(vid=10,pcp=0),br0,p1,p6,p7,p8" \
- "p5 0 1 p2,pop_vlan,push_vlan(vid=10,pcp=1),br0,p1,p6,p7,p8" \
+ "p5 0 0 pop_vlan,p2,push_vlan(vid=10,pcp=0),br0,p1,p6,p7,p8" \
+ "p5 0 1 pop_vlan,p2,push_vlan(vid=10,pcp=1),br0,p1,p6,p7,p8" \
"p5 10 0 br0,p1,p6,p7,p8,pop_vlan,p2" \
- "p5 10 1 br0,p1,p6,p7,p8,pop_vlan,push_vlan(vid=0,pcp=1),p2" \
+ "p5 10 1 br0,p1,p6,p7,p8,pop_vlan,p2" \
"p5 11 0 br0,p7" \
"p5 11 1 br0,p7" \
"p5 12 0 br0,p1,p6,pop_vlan,p3,p4,p7,p8" \
- "p5 12 1 br0,p1,p6,pop_vlan,push_vlan(vid=0,pcp=1),p3,p4,p7,p8" \
+ "p5 12 1 br0,p1,p6,pop_vlan,p4,p7,push_vlan(vid=0,pcp=1),p3,p8" \
"p6 none 0 p2,push_vlan(vid=10,pcp=0),br0,p1,p5,p7,p8" \
- "p6 0 0 p2,pop_vlan,push_vlan(vid=10,pcp=0),br0,p1,p5,p7,p8" \
- "p6 0 1 p2,pop_vlan,push_vlan(vid=10,pcp=1),br0,p1,p5,p7,p8" \
+ "p6 0 0 pop_vlan,p2,push_vlan(vid=10,pcp=0),br0,p1,p5,p7,p8" \
+ "p6 0 1 pop_vlan,p2,push_vlan(vid=10,pcp=1),br0,p1,p5,p7,p8" \
"p6 10 0 br0,p1,p5,p7,p8,pop_vlan,p2" \
- "p6 10 1 br0,p1,p5,p7,p8,pop_vlan,push_vlan(vid=0,pcp=1),p2" \
+ "p6 10 1 br0,p1,p5,p7,p8,pop_vlan,p2" \
"p6 11 0 drop" \
"p6 11 1 drop" \
"p6 12 0 br0,p1,p5,pop_vlan,p3,p4,p7,p8" \
- "p6 12 1 br0,p1,p5,pop_vlan,push_vlan(vid=0,pcp=1),p3,p4,p7,p8" \
+ "p6 12 1 br0,p1,p5,pop_vlan,p4,p7,push_vlan(vid=0,pcp=1),p3,p8" \
"p7 none 0 p3,p4,p8,push_vlan(vid=12,pcp=0),br0,p1,p5,p6" \
- "p7 0 0 p3,p4,p8,pop_vlan,push_vlan(vid=12,pcp=0),br0,p1,p5,p6" \
- "p7 0 1 p3,p4,p8,pop_vlan,push_vlan(vid=12,pcp=1),br0,p1,p5,p6" \
+ "p7 0 0 pop_vlan,p3,p4,p8,push_vlan(vid=12,pcp=0),br0,p1,p5,p6" \
+ "p7 0 1 p3,p8,pop_vlan,p4,push_vlan(vid=12,pcp=1),br0,p1,p5,p6" \
"p7 10 0 br0,p1,p5,p6,p8,pop_vlan,p2" \
- "p7 10 1 br0,p1,p5,p6,p8,pop_vlan,push_vlan(vid=0,pcp=1),p2" \
+ "p7 10 1 br0,p1,p5,p6,p8,pop_vlan,p2" \
"p7 11 0 br0,p5" \
"p7 11 1 br0,p5" \
"p7 12 0 br0,p1,p5,p6,pop_vlan,p3,p4,p8" \
- "p7 12 1 br0,p1,p5,p6,pop_vlan,push_vlan(vid=0,pcp=1),p3,p4,p8" \
+ "p7 12 1 br0,p1,p5,p6,pop_vlan,p4,push_vlan(vid=0,pcp=1),p3,p8" \
"p8 none 0 p3,p4,p7,push_vlan(vid=12,pcp=0),br0,p1,p5,p6" \
- "p8 0 0 p3,p4,p7,pop_vlan,push_vlan(vid=12,pcp=0),br0,p1,p5,p6" \
- "p8 0 1 p3,p4,p7,pop_vlan,push_vlan(vid=12,pcp=1),br0,p1,p5,p6" \
+ "p8 0 0 pop_vlan,p3,p4,p7,push_vlan(vid=12,pcp=0),br0,p1,p5,p6" \
+ "p8 0 1 p3,pop_vlan,p4,p7,push_vlan(vid=12,pcp=1),br0,p1,p5,p6" \
"p8 10 0 br0,p1,p5,p6,p7,pop_vlan,p2" \
- "p8 10 1 br0,p1,p5,p6,p7,pop_vlan,push_vlan(vid=0,pcp=1),p2" \
+ "p8 10 1 br0,p1,p5,p6,p7,pop_vlan,p2" \
"p8 11 0 drop" \
"p8 11 1 drop" \
"p8 12 0 br0,p1,p5,p6,pop_vlan,p3,p4,p7" \
- "p8 12 1 br0,p1,p5,p6,pop_vlan,push_vlan(vid=0,pcp=1),p3,p4,p7"
+ "p8 12 1 br0,p1,p5,p6,pop_vlan,p4,p7,push_vlan(vid=0,pcp=1),p3"
do
set $tuple
in_port=$1
flow="in_port($n_in_port),eth(src=50:54:00:00:00:01,dst=ff:ff:ff:ff:ff:ff),eth_type(0x8100),vlan(vid=$vlan,pcp=$pcp),encap(eth_type(0xabcd))"
fi
+ echo "----------------------------------------------------------------------"
+ echo "in_port=$in_port vlan=$vlan pcp=$pcp"
+
AT_CHECK([ovs-appctl ofproto/trace br0 "$flow"], [0], [stdout])
actual=`tail -1 stdout | sed 's/Datapath actions: //'`
- AT_CHECK([echo "in_port=$in_port vlan=$vlan"
- $PERL $srcdir/compare-odp-actions.pl "$expected" "$actual" br0=$br0 p1=$p1 p2=$p2 p3=$p3 p4=$p4 p5=$p5 p6=$p6 p7=$p7 p8=$p8], [0], [ignore])
+ AT_CHECK([ovs-dpctl normalize-actions "$flow" "$expected" br0=$br0 p1=$p1 p2=$p2 p3=$p3 p4=$p4 p5=$p5 p6=$p6 p7=$p7 p8=$p8], [0], [stdout])
+ mv stdout expout
+ AT_CHECK([ovs-dpctl normalize-actions "$flow" "$actual" br0=$br0 p1=$p1 p2=$p2 p3=$p3 p4=$p4 p5=$p5 p6=$p6 p7=$p7 p8=$p8], [0], [expout])
done
OVS_VSWITCHD_STOP
])
OVS_VSWITCHD_STOP
AT_CLEANUP
+
+
+AT_SETUP([ofproto-dpif - mirroring, select_all])
+OVS_VSWITCHD_START(
+ [add-port br0 p1 -- set Interface p1 type=dummy --\
+ add-port br0 p2 -- set Interface p2 type=dummy --\
+ add-port br0 p3 -- set Interface p3 type=dummy --\
+ set Bridge br0 mirrors=@m --\
+ --id=@p3 get Port p3 --\
+ --id=@m create Mirror name=mymirror \
+ select_all=true output_port=@p3], [<0>
+])
+
+AT_CHECK(
+ [ovs-vsctl \
+ -- get Interface p1 ofport \
+ -- get Interface p2 ofport \
+ -- get Interface p3 ofport],
+ [0], [stdout])
+set `cat stdout`
+p1=$1 p2=$2 p3=$3
+
+AT_DATA([flows.txt], [dnl
+in_port=1 actions=output:2
+in_port=2 actions=output:1
+])
+AT_CHECK([ovs-ofctl add-flows br0 flows.txt])
+
+flow="in_port($p1),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=1,tos=0,ttl=128,frag=no),icmp(type=8,code=0)"
+AT_CHECK([ovs-appctl ofproto/trace br0 "$flow"], [0], [stdout])
+AT_CHECK_UNQUOTED([tail -1 stdout], [0],
+ [Datapath actions: $p2,$p3
+])
+
+flow="in_port($p2),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=1,tos=0,ttl=128,frag=no),icmp(type=8,code=0)"
+AT_CHECK([ovs-appctl ofproto/trace br0 "$flow"], [0], [stdout])
+AT_CHECK_UNQUOTED([tail -1 stdout], [0],
+ [Datapath actions: $p1,$p3
+])
+
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+
+AT_SETUP([ofproto-dpif - mirroring, select_src])
+OVS_VSWITCHD_START(
+ [add-port br0 p1 -- set Interface p1 type=dummy --\
+ add-port br0 p2 -- set Interface p2 type=dummy --\
+ add-port br0 p3 -- set Interface p3 type=dummy --\
+ set Bridge br0 mirrors=@m --\
+ --id=@p1 get Port p1 -- --id=@p3 get Port p3 --\
+ --id=@m create Mirror name=mymirror \
+ select_src_port=@p1 output_port=@p3], [<0>
+])
+
+AT_CHECK(
+ [ovs-vsctl \
+ -- get Interface p1 ofport \
+ -- get Interface p2 ofport \
+ -- get Interface p3 ofport],
+ [0], [stdout])
+set `cat stdout`
+p1=$1 p2=$2 p3=$3
+
+AT_DATA([flows.txt], [dnl
+in_port=1 actions=output:2
+in_port=2 actions=output:1
+])
+AT_CHECK([ovs-ofctl add-flows br0 flows.txt])
+
+flow="in_port($p1),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=1,tos=0,ttl=128,frag=no),icmp(type=8,code=0)"
+AT_CHECK([ovs-appctl ofproto/trace br0 "$flow"], [0], [stdout])
+AT_CHECK_UNQUOTED([tail -1 stdout], [0],
+ [Datapath actions: $p2,$p3
+])
+
+flow="in_port($p2),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=1,tos=0,ttl=128,frag=no),icmp(type=8,code=0)"
+AT_CHECK([ovs-appctl ofproto/trace br0 "$flow"], [0], [stdout])
+AT_CHECK_UNQUOTED([tail -1 stdout], [0],
+ [Datapath actions: $p1
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto-dpif - mirroring, OFPP_NONE ingress port])
+OVS_VSWITCHD_START(
+ [add-port br0 p1 -- set Interface p1 type=dummy --\
+ add-port br0 p2 -- set Interface p2 type=dummy --\
+ set Bridge br0 mirrors=@m --\
+ --id=@p2 get Port p2 --\
+ --id=@m create Mirror name=mymirror \
+ select_all=true output_port=@p2], [<0>
+])
+
+AT_CHECK(
+ [ovs-vsctl \
+ -- get Interface p1 ofport \
+ -- get Interface p2 ofport],
+ [0], [stdout])
+set `cat stdout`
+p1=$1 p2=$2
+
+AT_CHECK([ovs-ofctl add-flow br0 action=output:1])
+
+# "in_port" defaults to OFPP_NONE if it's not specified.
+flow="eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=1,tos=0,ttl=128,frag=no),icmp(type=8,code=0)"
+AT_CHECK([ovs-appctl ofproto/trace br0 "$flow"], [0], [stdout])
+AT_CHECK_UNQUOTED([tail -1 stdout], [0],
+ [Datapath actions: $p1,$p2
+])
+
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+
+AT_SETUP([ofproto-dpif - mirroring, select_dst])
+OVS_VSWITCHD_START(
+ [add-port br0 p1 -- set Interface p1 type=dummy --\
+ add-port br0 p2 -- set Interface p2 type=dummy --\
+ add-port br0 p3 -- set Interface p3 type=dummy --\
+ set Bridge br0 mirrors=@m --\
+ --id=@p2 get Port p2 -- --id=@p3 get Port p3 --\
+ --id=@m create Mirror name=mymirror \
+ select_dst_port=@p2 output_port=@p3], [<0>
+])
+
+AT_CHECK(
+ [ovs-vsctl \
+ -- get Interface p1 ofport \
+ -- get Interface p2 ofport \
+ -- get Interface p3 ofport],
+ [0], [stdout])
+set `cat stdout`
+p1=$1 p2=$2 p3=$3
+
+AT_DATA([flows.txt], [dnl
+in_port=1 actions=output:2
+in_port=2 actions=output:1
+])
+AT_CHECK([ovs-ofctl add-flows br0 flows.txt])
+
+flow="in_port($p1),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=1,tos=0,ttl=128,frag=no),icmp(type=8,code=0)"
+AT_CHECK([ovs-appctl ofproto/trace br0 "$flow"], [0], [stdout])
+AT_CHECK_UNQUOTED([tail -1 stdout], [0],
+ [Datapath actions: $p2,$p3
+])
+
+flow="in_port($p2),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=1,tos=0,ttl=128,frag=no),icmp(type=8,code=0)"
+AT_CHECK([ovs-appctl ofproto/trace br0 "$flow"], [0], [stdout])
+AT_CHECK_UNQUOTED([tail -1 stdout], [0],
+ [Datapath actions: $p1
+])
+
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+
+AT_SETUP([ofproto-dpif - mirroring, select_vlan])
+OVS_VSWITCHD_START(
+ [add-port br0 p1 -- set Interface p1 type=dummy --\
+ add-port br0 p2 -- set Interface p2 type=dummy --\
+ add-port br0 p3 -- set Interface p3 type=dummy --\
+ set Bridge br0 mirrors=@m --\
+ --id=@p2 get Port p2 -- --id=@p3 get Port p3 --\
+ --id=@m create Mirror name=mymirror \
+ select_all=true select_vlan=11 output_port=@p3], [<0>
+])
+
+AT_CHECK(
+ [ovs-vsctl \
+ -- get Interface p1 ofport \
+ -- get Interface p2 ofport \
+ -- get Interface p3 ofport],
+ [0], [stdout])
+set `cat stdout`
+p1=$1 p2=$2 p3=$3
+
+AT_DATA([flows.txt], [dnl
+in_port=1, actions=output:2
+])
+AT_CHECK([ovs-ofctl add-flows br0 flows.txt])
+
+flow="in_port($p1),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=1,tos=0,ttl=128,frag=no),icmp(type=8,code=0)"
+AT_CHECK([ovs-appctl ofproto/trace br0 "$flow"], [0], [stdout])
+AT_CHECK_UNQUOTED([tail -1 stdout], [0],
+ [Datapath actions: $p2
+])
+
+flow="in_port($p1),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x8100),vlan(vid=10,pcp=0),encap(eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=1,tos=0,ttl=128,frag=no),icmp(type=8,code=0))"
+AT_CHECK([ovs-appctl ofproto/trace br0 "$flow"], [0], [stdout])
+AT_CHECK_UNQUOTED([tail -1 stdout], [0],
+ [Datapath actions: $p2
+])
+
+flow="in_port($p1),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x8100),vlan(vid=11,pcp=0),encap(eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=1,tos=0,ttl=128,frag=no),icmp(type=8,code=0))"
+AT_CHECK([ovs-appctl ofproto/trace br0 "$flow"], [0], [stdout])
+AT_CHECK_UNQUOTED([tail -1 stdout], [0],
+ [Datapath actions: $p2,$p3
+])
+
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+
+AT_SETUP([ofproto-dpif - mirroring, output_port])
+OVS_VSWITCHD_START(
+ [add-port br0 p1 -- set Interface p1 type=dummy --\
+ add-port br0 p2 -- set Interface p2 type=dummy --\
+ add-port br0 p3 -- set Interface p3 type=dummy --\
+ set Bridge br0 mirrors=@m --\
+ --id=@p3 get Port p3 --\
+ --id=@m create Mirror name=mymirror \
+ select_all=true output_port=@p3], [<0>
+])
+
+AT_CHECK(
+ [ovs-vsctl \
+ -- get Interface p1 ofport \
+ -- get Interface p2 ofport \
+ -- get Interface p3 ofport],
+ [0], [stdout])
+set `cat stdout`
+p1=$1 p2=$2 p3=$3
+
+AT_DATA([flows.txt], [dnl
+in_port=1 actions=mod_vlan_vid:17,output:2
+in_port=2 actions=output:1
+])
+AT_CHECK([ovs-ofctl add-flows br0 flows.txt])
+
+flow="in_port($p1),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=1,tos=0,ttl=128,frag=no),icmp(type=8,code=0)"
+AT_CHECK([ovs-appctl ofproto/trace br0 "$flow"], [0], [stdout])
+AT_CHECK_UNQUOTED([tail -1 stdout], [0],
+ [Datapath actions: push_vlan(vid=17,pcp=0),$p2,pop_vlan,$p3
+])
+
+flow="in_port($p2),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=1,tos=0,ttl=128,frag=no),icmp(type=8,code=0)"
+AT_CHECK([ovs-appctl ofproto/trace br0 "$flow"], [0], [stdout])
+AT_CHECK_UNQUOTED([tail -1 stdout], [0],
+ [Datapath actions: $p1,$p3
+])
+
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto-dpif - mirroring, output_vlan])
+OVS_VSWITCHD_START(
+ [add-port br0 p1 -- set Interface p1 type=dummy --\
+ add-port br0 p2 -- set Interface p2 type=dummy --\
+ set Bridge br0 mirrors=@m --\
+ --id=@m create Mirror name=mymirror \
+ select_all=true output_vlan=12], [<0>
+])
+
+AT_CHECK(
+ [ovs-vsctl \
+ -- get Interface p1 ofport \
+ -- get Interface p2 ofport],
+ [0], [stdout])
+set `cat stdout`
+br0=0 p1=$1 p2=$2
+
+AT_DATA([flows.txt], [dnl
+in_port=1 actions=output:2
+in_port=2 actions=mod_vlan_vid:17,output:1
+])
+AT_CHECK([ovs-ofctl add-flows br0 flows.txt])
+
+flow="in_port($p1),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=1,tos=0,ttl=128,frag=no),icmp(type=8,code=0)"
+AT_CHECK([ovs-appctl ofproto/trace br0 "$flow"], [0], [stdout])
+actual=`tail -1 stdout | sed 's/Datapath actions: //'`
+
+expected="$p2,push_vlan(vid=12,pcp=0),$br0,$p1,$p2"
+AT_CHECK([ovs-dpctl normalize-actions "$flow" "$expected" br0=$br0 p1=$p1 p2=$p2], [0], [stdout])
+mv stdout expout
+AT_CHECK([ovs-dpctl normalize-actions "$flow" "$actual" br0=$br0 p1=$p1 p2=$p2], [0], [expout])
+
+flow="in_port($p2),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=1,tos=0,ttl=128,frag=no),icmp(type=8,code=0)"
+AT_CHECK([ovs-appctl ofproto/trace br0 "$flow"], [0], [stdout])
+actual=`tail -1 stdout | sed 's/Datapath actions: //'`
+
+expected="push_vlan(vid=17,pcp=0),$p1,pop_vlan,push_vlan(vid=12,pcp=0),$br0,$p1,$p2"
+AT_CHECK([ovs-dpctl normalize-actions "$flow" "$expected" br0=$br0 p1=$p1 p2=$p2], [0], [stdout])
+mv stdout expout
+AT_CHECK([ovs-dpctl normalize-actions "$flow" "$actual" br0=$br0 p1=$p1 p2=$p2], [0], [expout])
+
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+m4_define([OFPROTO_TRACE],
+ [flow="$2"
+ AT_CHECK([ovs-appctl ofproto/trace $1 "$flow" $3], [0], [stdout])
+ actual=`tail -1 stdout | sed 's/Datapath actions: //'`
+ expected="$4"
+ AT_CHECK([ovs-dpctl normalize-actions "$flow" "$expected" $5],
+ [0], [stdout])
+ mv stdout expout
+ AT_CHECK([ovs-dpctl normalize-actions "$flow" "$actual" $5],
+ [0], [expout])])
+
+AT_SETUP([ofproto-dpif - MAC learning])
+OVS_VSWITCHD_START(
+ [set bridge br0 fail-mode=standalone -- \
+ add-port br0 p1 -- set Interface p1 type=dummy -- \
+ add-port br0 p2 -- set Interface p2 type=dummy -- \
+ add-port br0 p3 -- set Interface p3 type=dummy])
+
+AT_CHECK(
+ [ovs-vsctl \
+ -- get Interface p1 ofport \
+ -- get Interface p2 ofport \
+ -- get Interface p3 ofport],
+ [0], [stdout])
+set `cat stdout`
+br0=0 p1=$1 p2=$2 p3=$3
+arp='eth_type(0x0806),arp(sip=192.168.0.1,tip=192.168.0.2,op=1,sha=50:54:00:00:00:05,tha=00:00:00:00:00:00)'
+
+# Trace an ARP packet arriving on p3, to create a MAC learning entry.
+OFPROTO_TRACE(
+ [br0],
+ [in_port($p3),eth(src=50:54:00:00:00:05,dst=ff:ff:ff:ff:ff:ff),$arp],
+ [-generate],
+ [$br0,$p1,$p2],
+ [br0=$br0 p1=$p1 p2=$p2 p3=$p3])
+
+# Check for the MAC learning entry.
+AT_CHECK_UNQUOTED([ovs-appctl fdb/show br0 | sed 's/[[0-9]]$/?/'], [0], [dnl
+ port VLAN MAC Age
+ $p3 0 50:54:00:00:00:05 ?
+])
+
+# Trace a packet arrival destined for the learned MAC.
+# (This will also learn a MAC.)
+OFPROTO_TRACE(
+ [br0],
+ [in_port($p1),eth(src=50:54:00:00:00:06,dst=50:54:00:00:00:05),$arp],
+ [-generate],
+ [$p3],
+ [br0=$br0 p1=$p1 p2=$p2 p3=$p3])
+
+# Check for both MAC learning entries.
+AT_CHECK_UNQUOTED([ovs-appctl fdb/show br0 | sed 's/[[0-9]]$/?/'], [0], [dnl
+ port VLAN MAC Age
+ $p3 0 50:54:00:00:00:05 ?
+ $p1 0 50:54:00:00:00:06 ?
+])
+
+# Trace a packet arrival that updates the first learned MAC entry.
+OFPROTO_TRACE(
+ [br0],
+ [in_port($p2),eth(src=50:54:00:00:00:05,dst=ff:ff:ff:ff:ff:ff),$arp],
+ [-generate],
+ [$br0,$p1,$p3],
+ [br0=$br0 p1=$p1 p2=$p2 p3=$p3])
+
+# Check that the MAC learning entry was updated.
+AT_CHECK_UNQUOTED([ovs-appctl fdb/show br0 | sed 's/[[0-9]]$/?/'], [0], [dnl
+ port VLAN MAC Age
+ $p1 0 50:54:00:00:00:06 ?
+ $p2 0 50:54:00:00:00:05 ?
+])
+
+# Add another bridge.
+AT_CHECK(
+ [ovs-vsctl \
+ -- add-br br1 \
+ -- set bridge br1 datapath-type=dummy \
+ -- add-port br1 p4 -- set interface p4 type=dummy \
+ -- add-port br1 p5 -- set interface p5 type=dummy])
+AT_CHECK(
+ [ovs-vsctl \
+ -- get Interface p4 ofport \
+ -- get Interface p5 ofport],
+ [0], [stdout])
+set `cat stdout`
+br1=0 p4=$1 p5=$2
+
+# Trace some packet arrivals in br1 to create MAC learning entries there too.
+OFPROTO_TRACE(
+ [br1],
+ [in_port($p4),eth(src=50:54:00:00:00:06,dst=ff:ff:ff:ff:ff:ff),$arp],
+ [-generate],
+ [$br1,$p5],
+ [br1=$br1 p4=$p4 p5=$p5])
+OFPROTO_TRACE(
+ [br1],
+ [in_port($p5),eth(src=50:54:00:00:00:07,dst=ff:ff:ff:ff:ff:ff),$arp],
+ [-generate],
+ [$br1,$p4],
+ [br1=$br1 p4=$p4 p5=$p5])
+
+# Check that the MAC learning entries were added.
+AT_CHECK_UNQUOTED([ovs-appctl fdb/show br1 | sed 's/[[0-9]]$/?/'], [0], [dnl
+ port VLAN MAC Age
+ $p4 0 50:54:00:00:00:06 ?
+ $p5 0 50:54:00:00:00:07 ?
+])
+
+# Delete port p1 and see that its MAC learning entry disappeared, and
+# that the MAC learning entry for the same MAC was also deleted from br1.
+AT_CHECK([ovs-vsctl del-port p1])
+AT_CHECK_UNQUOTED([ovs-appctl fdb/show br0 | sed 's/[[0-9]]$/?/'], [0], [dnl
+ port VLAN MAC Age
+ $p2 0 50:54:00:00:00:05 ?
+])
+AT_CHECK_UNQUOTED([ovs-appctl fdb/show br1 | sed 's/[[0-9]]$/?/'], [0], [dnl
+ port VLAN MAC Age
+ $p5 0 50:54:00:00:00:07 ?
+])
+
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+dnl Test that basic NetFlow reports flow statistics correctly:
+dnl - The initial packet of a flow are correctly accounted.
+dnl - Later packets within a flow are correctly accounted.
+dnl - Flow actions changing (in this case, due to MAC learning)
+dnl cause a record to be sent.
+AT_SETUP([ofproto-dpif - NetFlow flow expiration])
+
+AT_SKIP_IF([test "x$RANDOM" = x])
+NETFLOW_PORT=`expr 32767 + \( $RANDOM % 32767 \)`
+
+OVS_VSWITCHD_START(
+ [set Bridge br0 fail-mode=standalone -- \
+ add-port br0 p1 -- set Interface p1 type=dummy -- \
+ add-port br0 p2 -- set Interface p2 type=dummy -- \
+ set Bridge br0 netflow=@nf -- \
+ --id=@nf create NetFlow targets=\"127.0.0.1:$NETFLOW_PORT\" \
+ engine_id=1 engine_type=2 active_timeout=30 \
+ add-id-to-interface=false], [<0>
+])
+
+AT_CHECK([test-netflow --detach --pidfile $NETFLOW_PORT:127.0.0.1 > netflow.log])AT_CAPTURE_FILE([netflow.log])
+
+for delay in 1000 30000; do
+ ovs-appctl netdev-dummy/receive p1 'in_port(2),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=1,tos=0,ttl=64,frag=no),icmp(type=8,code=0)'
+ ovs-appctl netdev-dummy/receive p2 'in_port(1),eth(src=50:54:00:00:00:07,dst=50:54:00:00:00:05),eth_type(0x0800),ipv4(src=192.168.0.2,dst=192.168.0.1,proto=1,tos=0,ttl=64,frag=no),icmp(type=0,code=0)'
+
+ ovs-appctl time/warp $delay
+done
+
+OVS_VSWITCHD_STOP
+ovs-appctl -t test-netflow exit
+
+AT_CHECK([[sed -e 's/, uptime [0-9]*//
+s/, now [0-9.]*//
+s/time \([0-9]*\)\.\.\.\1\b/time <moment>/
+s/time [0-9]*\.\.\.[0-9]*/time <range>/
+' netflow.log]], [0],
+ [header: v5, seq 0, engine 2,1
+rec: 192.168.0.1 > 192.168.0.2, if 1 > 65535, 1 pkts, 60 bytes, ICMP 8:0, time <moment>
+
+header: v5, seq 1, engine 2,1
+rec: 192.168.0.2 > 192.168.0.1, if 2 > 1, 2 pkts, 120 bytes, ICMP 0:0, time <range>
+rec: 192.168.0.1 > 192.168.0.2, if 1 > 2, 1 pkts, 60 bytes, ICMP 8:0, time <moment>
+])
+AT_CLEANUP
+
+dnl Test that basic NetFlow reports active expirations correctly.
+AT_SETUP([ofproto-dpif - NetFlow active expiration])
+
+AT_SKIP_IF([test "x$RANDOM" = x])
+NETFLOW_PORT=`expr 32767 + \( $RANDOM % 32767 \)`
+
+OVS_VSWITCHD_START(
+ [set Bridge br0 fail-mode=standalone -- \
+ add-port br0 p1 -- set Interface p1 type=dummy -- \
+ add-port br0 p2 -- set Interface p2 type=dummy -- \
+ set Bridge br0 netflow=@nf -- \
+ --id=@nf create NetFlow targets=\"127.0.0.1:$NETFLOW_PORT\" \
+ engine_id=1 engine_type=2 active_timeout=10 \
+ add-id-to-interface=false], [<0>
+])
+
+AT_CHECK([test-netflow --detach --pidfile $NETFLOW_PORT:127.0.0.1 > netflow.log])AT_CAPTURE_FILE([netflow.log])
+
+n=1
+while test $n -le 60; do
+ n=`expr $n + 1`
+
+ ovs-appctl netdev-dummy/receive p1 'in_port(2),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:07),eth_type(0x0800),ipv4(src=192.168.0.1,dst=192.168.0.2,proto=6,tos=0,ttl=64,frag=no),tcp(src=1234,dst=80)'
+ ovs-appctl netdev-dummy/receive p2 'in_port(1),eth(src=50:54:00:00:00:07,dst=50:54:00:00:00:05),eth_type(0x0800),ipv4(src=192.168.0.2,dst=192.168.0.1,proto=6,tos=0,ttl=64,frag=no),tcp(src=80,dst=1234)'
+
+ ovs-appctl time/warp 1000
+done
+
+ovs-appctl time/warp 10000
+
+OVS_VSWITCHD_STOP
+ovs-appctl -t test-netflow exit
+
+# Count the number of reported packets:
+# - From source to destination before MAC learning kicks in (just one).
+# - From source to destination after that.
+# - From destination to source.
+n_learn=0
+n_in=0
+n_out=0
+n_other=0
+n_recs=0
+none=0
+while read line; do
+ pkts=`echo "$line" | sed 's/.*, \([[0-9]]*\) pkts,.*/\1/'`
+ case $pkts in
+ [[0-9]]*) ;;
+ *) continue ;;
+ esac
+
+ case $line in
+ "rec: 192.168.0.1 > 192.168.0.2, if 1 > 65535, "*" pkts, "*" bytes, TCP 1234 > 80, time "*)
+ counter=n_learn
+ ;;
+ "rec: 192.168.0.1 > 192.168.0.2, if 1 > 2, "*" pkts, "*" bytes, TCP 1234 > 80, time "*)
+ counter=n_in
+ ;;
+ "rec: 192.168.0.2 > 192.168.0.1, if 2 > 1, "*" pkts, "*" bytes, TCP 80 > 1234, time "*)
+ counter=n_out
+ ;;
+ *)
+ counter=n_other
+ ;;
+ esac
+ eval $counter=\`expr \$$counter + \$pkts\`
+ n_recs=`expr $n_recs + 1`
+done < netflow.log
+
+# There should be exactly 1 MAC learning packet,
+# exactly 59 other packets in that direction,
+# and exactly 60 packets in the other direction.
+AT_CHECK([echo $n_learn $n_in $n_out $n_other], [0], [1 59 60 0
+])
+
+# There should be 1 expiration for MAC learning,
+# at least 5 active and a final expiration in one direction,
+# and at least 5 active and a final expiration in the other direction.
+echo $n_recs
+AT_CHECK([test $n_recs -ge 13])
+
+AT_CLEANUP
git://git.onelab.eu / sliver-openvswitch.git / blobdiff