git://git.onelab.eu / sliver-openvswitch.git / blobdiff
? search:
summary | shortlog | log | commit | commitdiff | tree
raw | inline | side by side
ofproto-dpif-monitor: Run ofproto-dpif-monitor in a thread.
[sliver-openvswitch.git] / tests / ofproto-dpif.at
diff --git a/tests/ofproto-dpif.at b/tests/ofproto-dpif.at
index 87e3d0e..bcf5e09 100644 (file)
--- a/tests/ofproto-dpif.at
+++ b/tests/ofproto-dpif.at
@@ -34,6 +34,37 @@ AT_CHECK([tail -1 stdout], [0],
 OVS_VSWITCHD_STOP
 AT_CLEANUP
 
+AT_SETUP([ofproto-dpif - write actions])
+OVS_VSWITCHD_START
+ADD_OF_PORTS([br0], [1], [10], [11], [12], [13])
+AT_DATA([flows.txt], [dnl
+table=0 in_port=1,ip actions=output(10),write_actions(set_field:192.168.3.90->ip_src,output(12)),goto_table(1)
+table=1 ip actions=write_actions(output(13)),goto_table(2)
+table=2 ip actions=set_field:192.168.3.91->ip_src,output(11)
+])
+AT_CHECK([ovs-ofctl -O OpenFlow12 add-flows br0 flows.txt])
+AT_CHECK([ovs-appctl ofproto/trace br0 'in_port=1,dl_src=50:54:00:00:00:05,dl_dst=50:54:00:00:00:07,dl_type=0x0800,nw_src=192.168.0.1,nw_dst=192.168.0.2,nw_proto=1,nw_tos=0,nw_ttl=128,icmp_type=8,icmp_code=0'], [0], [stdout])
+AT_CHECK([tail -1 stdout], [0],
+  [Datapath actions: 10,set(ipv4(src=192.168.3.91,dst=192.168.0.2,proto=1,tos=0,ttl=128,frag=no)),11,set(ipv4(src=192.168.3.90,dst=192.168.0.2,proto=1,tos=0,ttl=128,frag=no)),13
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto-dpif - clear actions])
+OVS_VSWITCHD_START
+ADD_OF_PORTS([br0], [1], [10], [11], [12])
+AT_DATA([flows.txt], [dnl
+table=0 in_port=1,ip actions=output(10),write_actions(set_field:192.168.3.90->ip_src,output(12)),goto_table(1)
+table=1 ip actions=set_field:192.168.3.91->ip_src,output(11),clear_actions
+])
+AT_CHECK([ovs-ofctl -O OpenFlow12 add-flows br0 flows.txt])
+AT_CHECK([ovs-appctl ofproto/trace br0 'in_port=1,dl_src=50:54:00:00:00:05,dl_dst=50:54:00:00:00:07,dl_type=0x0800,nw_src=192.168.0.1,nw_dst=192.168.0.2,nw_proto=1,nw_tos=0,nw_ttl=128,icmp_type=8,icmp_code=0'], [0], [stdout])
+AT_CHECK([tail -1 stdout], [0],
+  [Datapath actions: 10,set(ipv4(src=192.168.3.91,dst=192.168.0.2,proto=1,tos=0,ttl=128,frag=no)),11
+])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
 AT_SETUP([ofproto-dpif - registers])
 OVS_VSWITCHD_START
 ADD_OF_PORTS([br0], [20], [21], [22], [33], [90])
@@ -278,6 +309,7 @@ cookie=0xa dl_src=40:44:44:44:44:48 actions=push_mpls:0x8847,load:10->OXM_OF_MPL
 cookie=0xb dl_src=50:55:55:55:55:55 dl_type=0x8847 actions=load:1000->OXM_OF_MPLS_LABEL[[]],controller
 cookie=0xd dl_src=60:66:66:66:66:66 actions=pop_mpls:0x0800,controller
 cookie=0xc dl_src=70:77:77:77:77:77 actions=push_mpls:0x8848,load:1000->OXM_OF_MPLS_LABEL[[]],load:7->OXM_OF_MPLS_TC[[]],controller
+cookie=0xd dl_src=80:88:88:88:88:88 arp actions=load:2->OXM_OF_ARP_OP[[]],controller,load:0xc0a88001->OXM_OF_ARP_SPA[[]],controller,load:0x404444444441->OXM_OF_ARP_THA[[]],controller
 ])
 AT_CHECK([ovs-ofctl add-flows br0 flows.txt])
 
@@ -666,7 +698,35 @@ NXT_PACKET_IN (xid=0x0): table_id=7 cookie=0x9 total_len=64 in_port=1 tun_id=0x6
 udp,metadata=0,in_port=0,dl_vlan=80,dl_vlan_pcp=0,dl_src=80:81:81:81:81:81,dl_dst=82:82:82:82:82:82,nw_src=83.83.83.83,nw_dst=84.84.84.84,nw_tos=0,nw_ecn=0,nw_ttl=0,tp_src=85,tp_dst=86 udp_csum:43a1
 ])
 
-ovs-appctl time/stop
+dnl Modified ARP controller action.
+AT_CHECK([ovs-ofctl monitor br0 65534 -P nxm --detach --pidfile 2> ofctl_monitor.log])
+
+for i in 1 2 3; do
+    ovs-appctl netdev-dummy/receive p1 'in_port(1),eth(src=80:88:88:88:88:88,dst=ff:ff:ff:ff:ff:ff),eth_type(0x0806),arp(sip=192.168.0.1,tip=192.168.0.2,op=1,sha=50:54:00:00:00:05,tha=00:00:00:00:00:00)'
+done
+
+OVS_WAIT_UNTIL([ovs-appctl -t ovs-ofctl exit])
+AT_CHECK([cat ofctl_monitor.log], [0], [dnl
+NXT_PACKET_IN (xid=0x0): cookie=0xd total_len=60 in_port=1 (via action) data_len=60 (unbuffered)
+arp,metadata=0,in_port=0,vlan_tci=0x0000,dl_src=80:88:88:88:88:88,dl_dst=ff:ff:ff:ff:ff:ff,arp_spa=192.168.0.1,arp_tpa=192.168.0.2,arp_op=2,arp_sha=50:54:00:00:00:05,arp_tha=00:00:00:00:00:00
+NXT_PACKET_IN (xid=0x0): cookie=0xd total_len=60 in_port=1 (via action) data_len=60 (unbuffered)
+arp,metadata=0,in_port=0,vlan_tci=0x0000,dl_src=80:88:88:88:88:88,dl_dst=ff:ff:ff:ff:ff:ff,arp_spa=192.168.128.1,arp_tpa=192.168.0.2,arp_op=2,arp_sha=50:54:00:00:00:05,arp_tha=00:00:00:00:00:00
+NXT_PACKET_IN (xid=0x0): cookie=0xd total_len=60 in_port=1 (via action) data_len=60 (unbuffered)
+arp,metadata=0,in_port=0,vlan_tci=0x0000,dl_src=80:88:88:88:88:88,dl_dst=ff:ff:ff:ff:ff:ff,arp_spa=192.168.128.1,arp_tpa=192.168.0.2,arp_op=2,arp_sha=50:54:00:00:00:05,arp_tha=40:44:44:44:44:41
+NXT_PACKET_IN (xid=0x0): cookie=0xd total_len=60 in_port=1 (via action) data_len=60 (unbuffered)
+arp,metadata=0,in_port=0,vlan_tci=0x0000,dl_src=80:88:88:88:88:88,dl_dst=ff:ff:ff:ff:ff:ff,arp_spa=192.168.0.1,arp_tpa=192.168.0.2,arp_op=2,arp_sha=50:54:00:00:00:05,arp_tha=00:00:00:00:00:00
+NXT_PACKET_IN (xid=0x0): cookie=0xd total_len=60 in_port=1 (via action) data_len=60 (unbuffered)
+arp,metadata=0,in_port=0,vlan_tci=0x0000,dl_src=80:88:88:88:88:88,dl_dst=ff:ff:ff:ff:ff:ff,arp_spa=192.168.128.1,arp_tpa=192.168.0.2,arp_op=2,arp_sha=50:54:00:00:00:05,arp_tha=00:00:00:00:00:00
+NXT_PACKET_IN (xid=0x0): cookie=0xd total_len=60 in_port=1 (via action) data_len=60 (unbuffered)
+arp,metadata=0,in_port=0,vlan_tci=0x0000,dl_src=80:88:88:88:88:88,dl_dst=ff:ff:ff:ff:ff:ff,arp_spa=192.168.128.1,arp_tpa=192.168.0.2,arp_op=2,arp_sha=50:54:00:00:00:05,arp_tha=40:44:44:44:44:41
+NXT_PACKET_IN (xid=0x0): cookie=0xd total_len=60 in_port=1 (via action) data_len=60 (unbuffered)
+arp,metadata=0,in_port=0,vlan_tci=0x0000,dl_src=80:88:88:88:88:88,dl_dst=ff:ff:ff:ff:ff:ff,arp_spa=192.168.0.1,arp_tpa=192.168.0.2,arp_op=2,arp_sha=50:54:00:00:00:05,arp_tha=00:00:00:00:00:00
+NXT_PACKET_IN (xid=0x0): cookie=0xd total_len=60 in_port=1 (via action) data_len=60 (unbuffered)
+arp,metadata=0,in_port=0,vlan_tci=0x0000,dl_src=80:88:88:88:88:88,dl_dst=ff:ff:ff:ff:ff:ff,arp_spa=192.168.128.1,arp_tpa=192.168.0.2,arp_op=2,arp_sha=50:54:00:00:00:05,arp_tha=00:00:00:00:00:00
+NXT_PACKET_IN (xid=0x0): cookie=0xd total_len=60 in_port=1 (via action) data_len=60 (unbuffered)
+arp,metadata=0,in_port=0,vlan_tci=0x0000,dl_src=80:88:88:88:88:88,dl_dst=ff:ff:ff:ff:ff:ff,arp_spa=192.168.128.1,arp_tpa=192.168.0.2,arp_op=2,arp_sha=50:54:00:00:00:05,arp_tha=40:44:44:44:44:41
+])
+
 AT_CHECK([ovs-appctl time/warp 5000], [0], [ignore])
 
 dnl Checksum SCTP.
@@ -727,6 +787,7 @@ AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
  cookie=0xa, n_packets=3, n_bytes=180, dl_src=41:44:44:44:44:42 actions=push_mpls:0x8847,load:0xa->OXM_OF_MPLS_LABEL[[]],load:0x3->OXM_OF_MPLS_TC[[]],pop_mpls:0x0800,CONTROLLER:65535
  cookie=0xb, n_packets=3, n_bytes=180, mpls,dl_src=50:55:55:55:55:55 actions=load:0x3e8->OXM_OF_MPLS_LABEL[[]],CONTROLLER:65535
  cookie=0xc, n_packets=3, n_bytes=180, dl_src=70:77:77:77:77:77 actions=push_mpls:0x8848,load:0x3e8->OXM_OF_MPLS_LABEL[[]],load:0x7->OXM_OF_MPLS_TC[[]],CONTROLLER:65535
+ cookie=0xd, n_packets=3, n_bytes=180, arp,dl_src=80:88:88:88:88:88 actions=load:0x2->NXM_OF_ARP_OP[[]],CONTROLLER:65535,load:0xc0a88001->NXM_OF_ARP_SPA[[]],CONTROLLER:65535,load:0x404444444441->NXM_NX_ARP_THA[[]],CONTROLLER:65535
  cookie=0xd, n_packets=3, n_bytes=186, dl_src=60:66:66:66:66:66 actions=pop_mpls:0x0800,CONTROLLER:65535
  n_packets=3, n_bytes=180, dl_src=10:11:11:11:11:11 actions=CONTROLLER:65535
 NXST_FLOW reply:
@@ -735,6 +796,41 @@ NXST_FLOW reply:
 OVS_VSWITCHD_STOP
 AT_CLEANUP
 
+AT_SETUP([ofproto-dpif - ARP modification slow-path])
+OVS_VSWITCHD_START
+ADD_OF_PORTS([br0], [1], [2])
+
+ovs-vsctl -- set Interface p2 type=dummy options:pcap=p2.pcap
+ovs-ofctl add-flow br0 'in_port=1,arp actions=load:2->OXM_OF_ARP_OP[[]],2,load:0xc0a88001->OXM_OF_ARP_SPA[[]],2,load:0x404444444441->OXM_OF_ARP_THA[[]],2'
+
+# Input some packets that should follow the arp modification slow-path.
+for i in 1 2 3; do
+    ovs-appctl netdev-dummy/receive p1 'in_port(1),eth(src=80:88:88:88:88:88,dst=ff:ff:ff:ff:ff:ff),eth_type(0x0806),arp(sip=192.168.0.1,tip=192.168.0.2,op=1,sha=50:54:00:00:00:05,tha=00:00:00:00:00:00)'
+done
+AT_CHECK([ovs-appctl time/warp 5000], [0], [ignore])
+
+# Check the packets that were output.
+AT_CHECK([ovs-ofctl parse-pcap p2.pcap], [0], [dnl
+arp,metadata=0,in_port=0,vlan_tci=0x0000,dl_src=80:88:88:88:88:88,dl_dst=ff:ff:ff:ff:ff:ff,arp_spa=192.168.0.1,arp_tpa=192.168.0.2,arp_op=2,arp_sha=50:54:00:00:00:05,arp_tha=00:00:00:00:00:00
+arp,metadata=0,in_port=0,vlan_tci=0x0000,dl_src=80:88:88:88:88:88,dl_dst=ff:ff:ff:ff:ff:ff,arp_spa=192.168.128.1,arp_tpa=192.168.0.2,arp_op=2,arp_sha=50:54:00:00:00:05,arp_tha=00:00:00:00:00:00
+arp,metadata=0,in_port=0,vlan_tci=0x0000,dl_src=80:88:88:88:88:88,dl_dst=ff:ff:ff:ff:ff:ff,arp_spa=192.168.128.1,arp_tpa=192.168.0.2,arp_op=2,arp_sha=50:54:00:00:00:05,arp_tha=40:44:44:44:44:41
+arp,metadata=0,in_port=0,vlan_tci=0x0000,dl_src=80:88:88:88:88:88,dl_dst=ff:ff:ff:ff:ff:ff,arp_spa=192.168.0.1,arp_tpa=192.168.0.2,arp_op=2,arp_sha=50:54:00:00:00:05,arp_tha=00:00:00:00:00:00
+arp,metadata=0,in_port=0,vlan_tci=0x0000,dl_src=80:88:88:88:88:88,dl_dst=ff:ff:ff:ff:ff:ff,arp_spa=192.168.128.1,arp_tpa=192.168.0.2,arp_op=2,arp_sha=50:54:00:00:00:05,arp_tha=00:00:00:00:00:00
+arp,metadata=0,in_port=0,vlan_tci=0x0000,dl_src=80:88:88:88:88:88,dl_dst=ff:ff:ff:ff:ff:ff,arp_spa=192.168.128.1,arp_tpa=192.168.0.2,arp_op=2,arp_sha=50:54:00:00:00:05,arp_tha=40:44:44:44:44:41
+arp,metadata=0,in_port=0,vlan_tci=0x0000,dl_src=80:88:88:88:88:88,dl_dst=ff:ff:ff:ff:ff:ff,arp_spa=192.168.0.1,arp_tpa=192.168.0.2,arp_op=2,arp_sha=50:54:00:00:00:05,arp_tha=00:00:00:00:00:00
+arp,metadata=0,in_port=0,vlan_tci=0x0000,dl_src=80:88:88:88:88:88,dl_dst=ff:ff:ff:ff:ff:ff,arp_spa=192.168.128.1,arp_tpa=192.168.0.2,arp_op=2,arp_sha=50:54:00:00:00:05,arp_tha=00:00:00:00:00:00
+arp,metadata=0,in_port=0,vlan_tci=0x0000,dl_src=80:88:88:88:88:88,dl_dst=ff:ff:ff:ff:ff:ff,arp_spa=192.168.128.1,arp_tpa=192.168.0.2,arp_op=2,arp_sha=50:54:00:00:00:05,arp_tha=40:44:44:44:44:41
+])
+
+# Check that each of the packets actually passed through the slow-path.
+AT_CHECK([ovs-appctl coverage/show], [0], [stdout])
+AT_CHECK([sed -n 's/[[         ]]\{2,\}/ /g
+s/^dpif_execute_with_help.*total: //p' stdout], [0], [3
+])
+
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
 AT_SETUP([ofproto-dpif - VLAN handling])
 OVS_VSWITCHD_START(
   [set Bridge br0 fail-mode=standalone -- \
@@ -2839,6 +2935,76 @@ AT_CHECK([ovs-appctl bond/show | sed -n '/^.*may_enable:.*/p'], [0], [dnl
        may_enable: true
 ])
 
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+AT_SETUP([ofproto-dpif - ofproto-dpif-monitor 1])
+OVS_VSWITCHD_START([add-port br0 p0 -- set interface p0 type=gre options:remote_ip=1.2.3.4])
+
+# enable bfd on p0.
+AT_CHECK([ovs-vsctl set interface p0 bfd:enable=true])
+# check log.
+AT_CHECK([sed -n "s/^.*|ofproto_dpif_monitor(monitor)|INFO|\(.* created\)$/\1/p" ovs-vswitchd.log], [0], [dnl
+monitor thread created
+])
+# disable bfd on p0.
+AT_CHECK([ovs-vsctl set interface p0 bfd:enable=false])
+# check log.
+AT_CHECK([sed -n "s/^.*|ofproto_dpif_monitor(monitor)|INFO|\(.* terminated\)$/\1/p" ovs-vswitchd.log], [0], [dnl
+monitor thread terminated
+])
+AT_CHECK([cat ovs-vswitchd.log | sed -e '/^.*ofproto_dpif_monitor.*$/d' > ovs-vswitchd.log])
+
+# enable cfm on p0.
+AT_CHECK([ovs-vsctl set interface p0 cfm_mpid=10])
+# check log.
+AT_CHECK([sed -n "s/^.*|ofproto_dpif_monitor(monitor)|INFO|\(.* created\)$/\1/p" ovs-vswitchd.log], [0], [dnl
+monitor thread created
+])
+# disable cfm on p0.
+AT_CHECK([ovs-vsctl remove interface p0 cfm_mpid 10])
+# check log.
+AT_CHECK([sed -n "s/^.*|ofproto_dpif_monitor(monitor)|INFO|\(.* terminated\)$/\1/p" ovs-vswitchd.log], [0], [dnl
+monitor thread terminated
+])
+AT_CHECK([cat ovs-vswitchd.log | sed -e '/^.*ofproto_dpif_monitor.*$/d' > ovs-vswitchd.log])
+
+# enable both bfd and cfm on p0.
+AT_CHECK([ovs-vsctl set interface p0 bfd:enable=true cfm_mpid=10])
+# check log.
+AT_CHECK([sed -n "s/^.*|ofproto_dpif_monitor(monitor)|INFO|\(.* created\)$/\1/p" ovs-vswitchd.log], [0], [dnl
+monitor thread created
+])
+# disable bfd on p0.
+AT_CHECK([ovs-vsctl set interface p0 bfd:enable=false])
+# check log, there should not be the log of thread terminated.
+AT_CHECK([sed -n "s/^.*|ofproto_dpif_monitor(monitor)|INFO|\(.* terminated\)$/\1/p" ovs-vswitchd.log], [0], [dnl
+])
+# reenable bfd on p0.
+AT_CHECK([ovs-vsctl set interface p0 bfd:enable=true])
+# check log, should still be on log of thread created.
+AT_CHECK([sed -n "s/^.*|ofproto_dpif_monitor(monitor)|INFO|\(.* created\)$/\1/p" ovs-vswitchd.log], [0], [dnl
+monitor thread created
+])
+# disable bfd and cfm together.
+AT_CHECK([ovs-vsctl set interface p0 bfd:enable=false -- remove interface p0 cfm_mpid 10])
+# check log.
+AT_CHECK([sed -n "s/^.*|ofproto_dpif_monitor(monitor)|INFO|\(.* terminated\)$/\1/p" ovs-vswitchd.log], [0], [dnl
+monitor thread terminated
+])
+
+OVS_VSWITCHD_STOP
+AT_CLEANUP
+
+# this test helps avoid the deadlock between the main thread and monitor thread.
+AT_SETUP([ofproto-dpif - ofproto-dpif-monitor 2])
+OVS_VSWITCHD_START
+
+for i in `seq 1 199`
+do
+    AT_CHECK([ovs-vsctl add-port br0 p$i -- set interface p$i type=gre options:remote_ip=1.2.3.4 options:key=$i bfd:enable=true])
+done
+
 OVS_VSWITCHD_STOP
 AT_CLEANUP
 \f
sliver-openvswitch